A3P030-QNG132 - 30K Gate, 231 MHz FPGA | Microsemi
MPN: A3P030-QNG132 ✓ NakahandaA3P030-QNG132 Ulas
A field-programmable gate array, or FPGA, is a reconfigurable digital semiconductor that combines programmable logic blocks, routing resources, and programmable I/O in one device. Within the product hierarchy, the A3P030 belongs to the ProASIC3 family of FPGAs, combining low- and mid-density programmable logic with nonvolatile configuration capabilities. Its 30K-gate implementation supports designs requiring substantially more flexibility than a small programmable logic device while avoiding the resource requirements of a larger FPGA.
The A3P030 device provides 81 I/O terminals, 30,000 equivalent system gates, and 768 logic cells, with operation up to 231 MHz. Its 132-WFQFN package includes an exposed thermal pad and supports surface-mount PCB construction. The 1.5 V core supply and 130 nm process place the component in the conventional low-voltage CMOS domain. Configuration, dedicated input, output, and bidirectional I/O characteristics, along with timing and electrical limits, should be established from the manufacturer datasheet before PCB release.
ProASIC3 devices are designed for reusable programmable logic, including control sequencing, interface bridging, data acquisition, protocol conversion, and embedded subsystem glue logic. The A3P030-QNG132 is especially relevant when 81 I/O and a 132-pin package satisfy board-level routing needs without moving to a physically larger FPGA. Its 231 MHz operating frequency provides a useful margin for synchronous control logic, provided the selected clocking, I/O, and timing constraints are met.
Typical uses include industrial automation modules, test equipment, communications interfaces, consumer appliances, and embedded control platforms. The exposed-pad QFN construction improves heat transfer from the die when the board provides adequate copper area and a stable ground-plane connection. Designers should also account for configuration requirements, supported I/O standards, decoupling, signal-integrity constraints, and the maximum operating conditions specified for the exact ordering suffix.
A practical design priority is to follow the manufacturer pin-description and package recommendations exactly, including exposed-pad connection and thermal-via layout. Because pin-level connectivity is defined by the ProASIC3 package documentation and not by the abbreviated distributor listings, use the manufacturer datasheet when assigning tracks and checking power boundaries. Validate timing with the actual toolchain, constraints, and system clock assumptions used in production.
This page combines the exact catalog identity, core capacity, frequency, package, and I/O characteristics with engineering-oriented comparison, replacement guidance, and design notes. It is intended to help engineers qualify the device quickly while preserving the checks required for a reliable programmable-logic implementation.
Mga alternatibo na pwedeng ilagay na A3P030-QNG132 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
A3P030-QNG132I
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
A3P030-1QNG132I
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
A3P030-QNG132Y
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
A3P030-QN132II
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
A3P030-QNG132 Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | ProASIC3 field-programmable gate array |
| System Gates | 30,000 gates |
| Logic Cells | 768 logic cells |
| Maximum Operating Frequency | 231 MHz |
| Input/Output Count | 81 I/O |
| Core Supply Voltage | 1.5 V |
| Process Technology | 130 nm CMOS |
| Packhaging | 132-pin QFN with exposed pad |
| Package Designation | 132-WFQFN |
| Total Package Pins | 132 pins |
| Uri ng Pagpapasok | Surface mount |
| Programmable Logic Type | FPGA |
| Product Family | ProASIC3 |
Gabay sa Pin Configuration ng A3P030-QNG132 132 pins
Pin configuration para sa A3P030-QNG132 (132 pins package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa A3P030-QNG132.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
A3P030-QNG132 ay nararapat para sa 6 aplikasyons: Industrial Control and Automation, Communications Interface Conversion, Test and Measurement Equipment, Embedded Subsystem Control, Data Acquisition and Signal Conditioning, Consumer and Appliance Control.
Industrial Control and Automation
The A3P030-QNG132 is suitable for compact industrial control logic because it combines 30,000 system gates, 768 logic cells, and 81 I/O with operation up to 231 MHz. Those resources can implement sequencing, state machines, sensor conditioning, actuator control, and communications glue without requiring a larger programmable device. The 132-WFQFN package also reduces board footprint, while its exposed pad supports heat transfer when connected to a ground plane and thermal vias. For installations spanning a broad industrial temperature range, evaluate the A3P030-QNG132I ordering option before releasing the BOM.
Inirekomenda
Communications Interface Conversion
The A3P030-QNG132 can bridge dissimilar digital interfaces using its 81 programmable I/O and 768 logic cells. Engineers can use the fabric for protocol conversion, FIFO control, framing logic, and clock-domain isolation when system timing permits the 231 MHz device rating. The 30,000-gate capacity is appropriate for multiple interface channels without moving to a large FPGA. Because external interface voltage levels and timing are device-specific, confirm supported standards and I/O timing in the ProASIC3 manufacturer documentation before selecting pull-ups, terminations, and level shifters.
Inirekomenda
Test and Measurement Equipment
The A3P030-QNG132 is appropriate for programmable test logic, acquisition control, pattern sequencing, and instrument-bus coordination. Its 231 MHz operating frequency allows synchronous control paths, while 81 I/O provide direct connections to sensors, memory, converters, and front-end circuits. The device can consolidate several discrete control functions into a compact surface-mount implementation, reducing component count. Board design should reserve the exposed-pad connection for thermal and ground-plane performance, and timing validation should use the final clock, I/O standards, and constraints.
Inirekomenda
Embedded Subsystem Control
The A3P030-QNG132 can act as a dedicated subsystem controller for equipment that needs deterministic programmable logic alongside a host processor. The 768 logic cells and 30,000 system gates can host command decoders, arbitration, watchdog logic, interrupt handling, and peripheral sequencing. Its 81 I/O allow the controller to connect directly to local buses, status signals, and actuators, while the compact 132-WFQFN package preserves PCB area. Use the manufacturer configuration guidance to define startup behavior and verify power sequencing at the system level.
Inirekomenda
Data Acquisition and Signal Conditioning
The A3P030-QNG132 is suitable for coordinating data-acquisition channels when deterministic control and programmable preprocessing are required. Its 81 I/O can connect multiplexers, sensors, counters, and converters, while the 231 MHz fabric can manage sampling sequences and data routing. The 30K-gate capacity provides enough logic for digital filtering, calibration tables, and status control without a high-end FPGA. Signal integrity and analog performance remain board-level concerns, so implement the manufacturer's I/O recommendations and preserve clean grounding around sensitive acquisition circuits.
Inirekomenda
Consumer and Appliance Control
The A3P030-QNG132 can consolidate appliance control, user-interface scanning, motor sequencing, and protection logic into one programmable device. Its 768 logic cells and 81 I/O cover moderate control systems, while the 132-WFQFN package supports compact, automated PCB assembly. The 231 MHz rating is useful for synchronous panel-scanning and state-machine workloads. Choose this device when product life-cycle flexibility and field reconfiguration matter more than the very high logic capacity of a large FPGA, and validate the commercial-temperature grade against the enclosure's worst-case ambient condition.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for A3P030-QNG132 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | A3P030-QNG132I | A3P030-1QNG132I | A3P030-QNG132Y | A3P030-QN132II |
|---|---|---|---|---|---|
| Brand | Microsemi Corporation | Microsemi Corporation | Microsemi Corporation | Microsemi Corporation | Microsemi Corporation |
| Package | 132-WFQFN | 132-WFQFN | 132-WFQFN | 132-pin QFP | 132-terminal package |
| Total Pins | 132 pins | 132 pins | 132 pins | 132 pins | 132 terminals |
| Temperature or Ordering Grade | Commercial-temperature ordering suffix | Industrial-temperature ordering suffix | Industrial-temperature ordering suffix | Y ordering suffix | II ordering suffix |
Pangunahing mga Pagkakaiba
- Compact programmable-logic capacity with 81 I/O (kumpara saA3P030-QN132II)
- Exact 231 MHz device configuration (kumpara saA3P030-QN132II)
- Commercial-temperature ordering option (kumpara saA3P030-QNG132I)
- Same ProASIC3 family and package path for focused substitutions (kumpara saA3P030-1QNG132I)
Talaan ng Disenyo
Treat the exposed pad as both a thermal path and an electrical connection. Follow the manufacturer's package drawing for exposed-pad dimensions, solder requirements, and the required ground-plane connection. Provide multiple thermal vias where board geometry permits and avoid placing thermally sensitive analog sections directly beneath the FPGA. Estimated: actual junction temperature depends on switching activity, I/O loading, ambient temperature, copper area, and via count, so use the manufacturer thermal model rather than relying on package size alone.
Assign every board track from the A3P030-QNG132 package pin-description table rather than from a generic 132-pin symbol. Pay particular attention to configuration pins, dedicated pins, supplies, and the exposed pad. Keep decoupling paths short, use the manufacturer-specified capacitance and voltage characteristics, and connect the exposed pad to the intended supply or ground network. PCB rule checks should use the exact 132-WFQFN land pattern and mask clearances.
Do not substitute A3P030 ordering codes solely because the final digits differ. The I, Y, II, and -1 codes can represent different temperature, speed, or qualification characteristics even when the package and logic capacity remain similar. Compare the complete ordering guide, I/O limits, operating-temperature range, configuration compatibility, and timing constraints. After substitution, rerun synthesis, place-and-route, timing analysis, and board rule checks with the final device selected.
Define external clock and interface requirements before assigning I/O standards because the same physical package can expose different programmable functions. Reserve short return paths, use controlled-impedance routing for external interfaces, and keep switching I/O away from sensitive clocks where practical. Apply the manufacturer's input thresholds, output loading, and timing limits to the complete board, including connector loading and external pull networks that can alter edge behavior.
Impormasyon ng Pagsunod sa Kautusan
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact ordering code. Confirm compliance and environmental documentation with the manufacturer before use in regulated products.