A3P250L-FG256 - 250K Gate ProASIC3L FPGA | Microchip
MPN: A3P250L-FG256 ✗ Tapus ng BuhayA3P250L-FG256 Ulas
A field-programmable gate array is a programmable semiconductor that combines configurable logic, programmable I/O, and embedded memory on one die. An FPGA belongs to the broader semiconductor hierarchy and offers a shorter development cycle than a custom ASIC because its configuration can be changed during design, prototyping, or field updates. The ProASIC3L family is positioned for low-density designs requiring deterministic control logic, protocol bridging, peripheral integration, and general-purpose programmable logic.
The A3P250L-FG256 provides 157 I/O and 36,864 RAM bits in a 256-LBGA package, giving a compact board footprint with extensive programmable connectivity. Its stated 250,000-gate capacity supports parallel datapaths, state machines, interface logic, and embedded protocol functions. The 130 nm fabrication technology provides a practical balance between logic density, programmable nonvolatile configuration, power consumption, and cost for embedded control applications.
The ProASIC3L architecture supports configuration of logic, I/O standards, and programmable resources through the vendor's development environment. Because configuration data is stored in the device, the FPGA can retain its programmed behavior without continuous external memory access. Engineers must still account for startup configuration time, I/O drive limits, clock topology, bank voltage constraints, and the maximum operating frequency when assigning logic and routing high-speed interfaces.
Typical applications include industrial control, communications infrastructure, instrumentation, embedded networking, and aerospace or defense equipment. The 157 available I/O are useful for connecting external memories, transceivers, sensors, and parallel processors, while the on-chip RAM can accelerate counters, packet buffers, status registers, and small lookup or arithmetic functions.
A critical design consideration is package and power planning. A 256-LBGA device requires fine-pitch PCB routing, adequate thermal spreading, and strict decoupling around its 1.2 V core supply. Signal-integrity and clock-budget calculations should be performed before committing to a system-level clock rate, because routing congestion and external memory interfaces can reduce practical performance.
This page organizes the A3P250L-FG256 package, resource, application, and replacement information into an engineering-focused reference. It also highlights which migration choices retain the 256-ball footprint and where package, grade, speed, or device-family differences require additional verification before redesign.
Mga alternatibo na pwedeng ilagay na A3P250L-FG256 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok A3P250L-FG256 (parehas na form factor at footprint) — pagkakaiba sa Core Supply Voltage, Device Type.
A3P250L-1FG256
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
A3P250L-FG256I
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
A3P250-FGG256
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
A3P250-FGG256I
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
A3P250L-FG256 Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | ProASIC3L field-programmable gate array (FPGA) |
| Logic Capacity | 250,000 gates |
| Programmable I/O Count | 157 I/O |
| Embedded RAM | 36,864 bits |
| Maximum Operating Frequency | 781.25 MHz |
| Core Supply Voltage | 1.2 V |
| Fabrication Technology | 130 nm |
| Package Type | 256-LBGA |
| Package Form Factor | 17 x 17 mm |
| Package Pin Count | 256 pins |
| Uri ng Pagpapasok | Surface mount |
Gabay sa Pin Configuration ng A3P250L-FG256 256 pins
Pin configuration para sa A3P250L-FG256 (256 pins package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa A3P250L-FG256.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
A3P250L-FG256 ay nararapat para sa 6 aplikasyons: Industrial Programmable Control, Communications Protocol Bridging, Aerospace and Defense Instrumentation, Embedded Networking Gateway, Precision Test and Measurement, Sensor and Condition Monitoring.
Industrial Programmable Control
The A3P250L-FG256 fits industrial controllers that combine sequential logic, parallel I/O, and modest embedded buffering on one reprogrammable device. Its 250,000 gates can host state machines, interlocks, counters, and supervisory logic, while 36,864 RAM bits support operating registers and short data buffers. The 157 programmable I/O provide connections to sensors, actuators, isolation interfaces, and status indicators. In a control cabinet, the device can consolidate logic that would otherwise occupy multiple fixed-function devices and support configuration changes without replacing the PCB. The 1.2 V core and 256-LBGA package require careful multilayer routing, while external interfaces should use the bank-specific voltage limits and drive capabilities defined in the manufacturer datasheet.
Inirekomenda
Communications Protocol Bridging
The A3P250L-FG256 is suitable for protocol converters and communications front ends that require multiple parallel interfaces, configurable logic, and modest packet buffering. The 157 I/O can accommodate parallel data buses, control signals, transceiver enables, and clock inputs, while the ProASIC3L resources can implement framing, arbitration, checksum, and state-management functions. For dual-rate or multi-protocol equipment, independent clock domains can be assigned within the device as long as each path meets the 781.25 MHz family frequency limit and timing constraints. The 36,864 RAM bits are adequate for small FIFOs and status structures rather than large frame storage. PCB design should preserve controlled return paths and isolate switching interfaces from sensitive clock and data nets.
Inirekomenda
Aerospace and Defense Instrumentation
The A3P250L-FG256 can support embedded instrumentation, signal conditioning, and data-acquisition control where field-programmable logic provides flexibility across hardware configurations. Its 250,000 gates allow parallel acquisition channels, timing units, diagnostics, and command interpreters to share one FPGA, while 157 I/O simplify connections to converters, sensors, and memory. The nonvolatile configuration characteristics of the ProASIC3 family support controlled startup behavior without a continuously powered configuration device. Qualification of an aerospace or defense design requires the correct ordering grade, documented operating-temperature limits, radiation and reliability requirements, and lot traceability. The compact 17 x 17 mm 256-LBGA package also reduces board area but demands thermal analysis and a manufacturing process capable of handling its fine-pitch ball grid.
Inirekomenda
Embedded Networking Gateway
The A3P250L-FG256 is appropriate for a compact networking gateway that needs flexible serial, parallel, and memory-facing logic alongside a dedicated communications processor. The FPGA can implement protocol translation, buffering, packet classification, FIFO control, and supervisory functions without loading every task onto the host processor. Its 157 I/O provide ample connectivity for multiple MAC or PHY-facing interfaces, LEDs, management signals, and local storage, while 36,864 RAM bits support descriptors and short packet queues. The 256-LBGA package helps limit board area, and the 781.25 MHz maximum family frequency provides margin for parallel datapaths and clocked state machines. Design verification should include timing closure, I/O-standard assignment, power sequencing, and thermal testing around the 1.2 V core rail.
Inirekomenda
Precision Test and Measurement
The A3P250L-FG256 is well suited to programmable test and measurement front ends that coordinate multiple converters, counters, triggers, and communication ports. Its 250,000-gate fabric can implement acquisition control, timing generation, calibration tables, and result formatting, while the 157 I/O support parallel converter data, synchronization inputs, and instrument control lines. The 36,864 RAM bits can hold calibration values, status words, and short sample windows. This combination allows one reprogrammable device to consolidate logic previously distributed across counters and glue logic. Timing-sensitive paths must be constrained against the 781.25 MHz maximum device frequency, and the board must provide clean clock distribution and stable core decoupling. Calibration data should be stored outside the FPGA when retention across reprogramming is required.
Inirekomenda
Sensor and Condition Monitoring
The A3P250L-FG256 can act as a local aggregation and control device for sensor nodes that combine multiple analog channels with communications and local decision logic. The 157 I/O allow direct connections to sensor front ends, multiplexers, excitation controls, status LEDs, and serial transceivers. The fabric's 250,000 gates can implement filtering, thresholding, compensation, event counting, and fault detection, while 36,864 RAM bits provide space for calibration coefficients, running totals, and diagnostic history. A nonvolatile FPGA configuration is useful in equipment that must retain its control behavior across power cycles. For low-power designs, disable unused resources, review I/O states during configuration, and select the proper supply sequence. Thermal verification should account for both the 1.2 V core and activity-dependent I/O loading.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for A3P250L-FG256 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | A3P250L-1FG256 | A3P250L-FG256I | A3P250-FGG256 | A3P250-FGG256I |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 256-LBGA | 256-FPBGA | 256-LBGA | 256-LBGA | 256-LBGA |
| FPGA Family | ProASIC3L | ProASIC3L | ProASIC3L | ProASIC3 | ProASIC3 |
| Ordering Suffix | FG256 | -1FG256 speed designation | FG256I industrial suffix | FGG256 | FGG256I industrial suffix |
Pangunahing mga Pagkakaiba
- Standard ProASIC3L configuration with the original FG256 suffix (kumpara saA3P250L-1FG256)
- Explicit industrial-grade ordering option in the same 256-LBGA format (kumpara saA3P250L-FG256I)
- Direct ProASIC3L family migration without changing the logic scale (kumpara saA3P250-FGG256)
Talaan ng Disenyo
The A3P250L-FG256 uses a 1.2 V core, so the power rail must remain within the device's specified operating range under both startup and maximum logic activity. Place the required core and decoupling capacitors close to their designated supply balls, use multiple power and ground connections as specified by the package data, and avoid sharing high-current return paths with sensitive clock or I/O routing. Validate the complete rail under temperature because resistance and regulator efficiency can alter the voltage seen by the device.
The 256-LBGA footprint requires a multilayer PCB with short, symmetric power distribution and controlled escape routing for all used balls. Follow the manufacturer land pattern, ball-pitch, solder-mask, and paste recommendations exactly. Avoid adding vias inside sensitive escape paths unless the PCB process qualification supports them. A finished-board X-ray inspection is advisable because hidden solder defects can create intermittent I/O failures that are difficult to distinguish from FPGA configuration problems.
Assign clocks, high-speed I/O, and memory interfaces before finalizing the logic floorplan. The device family supports operation up to 781.25 MHz, but practical performance also depends on routing congestion, clock jitter, I/O loading, and the selected speed grade. Use dedicated clock-capable inputs where required, avoid long stub branches, and keep configuration, serial programming, and JTAG access unobstructed for production test and field diagnostics.
Do not treat a matching 256-ball package as sufficient evidence that every suffix is interchangeable. A3P250L-1FG256 changes the speed designation, A3P250L-FG256I changes the environmental ordering intent, and A3P250-FGG256 changes the ProASIC3 family designation. Verify configuration compatibility, supported I/O standards, bank voltages, timing limits, tool support, and programming files before releasing a replacement to production.
Impormasyon ng Pagsunod sa Kautusan
The component is an FPGA and is not inherently AEC-Q100 qualified. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation or declaration for the exact ordering code.