AD545KH - 16P Multiplying DAC | Analog Devices
MPN: AD545KH ✓ NakahandaAD545KH Ulas
A multiplying DAC is a digital-to-analog converter whose output current or voltage depends on both a digital input code and an external reference. Unlike a fixed-output DAC, this architecture allows an engineer to scale the converted result by changing the reference voltage or the gain-setting network. In the broader semiconductor hierarchy, the AD545KH belongs to the DAC family within ADC/DAC converters and, more broadly, within data-conversion and signal-processing integrated circuits.
The AD5450 family is identified as a group of high-bandwidth multiplying DACs with a serial interface. Serial control reduces the number of parallel address and data pins needed on a PCB, making the converter suitable for compact instrumentation, control, and test systems. The available product documentation associates AD545KH with a 16-pin package, while the exact mechanical suffix, temperature range, electrical limits, and reference requirements must be confirmed from the manufacturer documentation before production release.
Because the AD545KH is a multiplying converter, its reference accuracy, reference impedance, load, output buffer, and digital interface timing directly influence end-to-end accuracy. Designers should preserve the analog output topology used by the manufacturer application circuit and treat the external reference and feedback network as precision signal-chain elements. Decoupling, grounding, and return-current management are particularly important when converter outputs feed instrumentation amplifiers or measurement front ends.
Typical uses include digital potentiometer emulation, programmable gain and offset systems, industrial process-control modules, automated test equipment, and compact laboratory instruments. In these applications, the multiplying architecture can let a digital control word select an output level while the external reference sets the full-scale scale. The family resolution range also provides a path to match conversion granularity to the precision required by the instrument.
For implementation, verify serial clock polarity, data setup and hold timing, reset behavior, power-supply sequencing, and the complete pin assignment from the AD5450 manufacturer datasheet. Confirm the exact operating and storage temperature ratings, supply voltage, quiescent current, and reference current limits for AD545KH rather than assuming values from another AD5450 package suffix. Use the same package outline and exposed or non-exposed pad arrangement shown in the selected mechanical drawing.
This product record combines package identification, structured technical context, practical converter-design guidance, and a focused family comparison. It also distinguishes genuine drop-in family options from broader functional alternatives, helping engineers make a PCB-compatible selection while completing the required electrical and lifecycle checks.
Mga alternatibo na pwedeng ilagay na AD545KH — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
AD5450JH
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
AD5450KZ
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
AD5451JH
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
AD5451KH
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
AD5451JZ
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
AD545KH Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | Multiplying digital-to-analog converter (DAC) |
| Associated Device Family | AD5450 high-bandwidth multiplying DAC family |
| Family Resolution Options | 8-bit, 10-bit, 12-bit, and 14-bit |
| Documented Pin Count | 16 pins |
| Digital Interface | Serial interface |
| Conversion Architecture | Multiplying DAC |
| Manufacturer | Analog Devices |
Gabay sa Pin Configuration ng AD545KH standard
Pin configuration para sa AD545KH (standard package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa AD545KH.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
AD545KH ay nararapat para sa 6 aplikasyons: Programmable Instrumentation, Industrial Process Control, Automated Test Equipment, Digital Potentiometer Emulation, Programmable Gain and Offset, Laboratory Signal Generation.
Programmable Instrumentation
The AD545KH fits compact instrumentation where an 8-bit digital command can control an analog level through a multiplying DAC architecture. Placing the converter behind a serial interface reduces parallel logic wiring, while an external reference permits the output scale to be set independently of the digital code. This arrangement is useful in bench instruments, programmable attenuator systems, and compact test modules where full-scale range changes are needed without redesigning the digital bus. The designer should allow sufficient settling time for the 8-bit command to reach the required analog accuracy, keep reference routing short, and verify that the output buffer and feedback network preserve useful linearity.
Inirekomenda
Industrial Process Control
AD545KH can represent a programmable command or set point in industrial control modules where an 8-bit conversion step is adequate for the controlled variable. Its serial interface suits distributed control hardware that prioritizes compactness and deterministic digital communication over a parallel data bus. The multiplying characteristic allows an external reference to establish the actuator or analog-command range, so changing the reference can alter scaling without changing converter logic. For process-control use, the circuit must be reviewed for reference accuracy, output settling, isolation boundaries, and noise coupling from adjacent switching stages.
Inirekomenda
Automated Test Equipment
The AD545KH is appropriate for automated test equipment that generates coarse analog excitation or programmable reference values. An 8-bit command provides 256 digital steps, which can be useful when measurement resolution is determined mainly by a subsequent amplifier, sensor, or ADC rather than by the converter itself. The serial interface reduces connector and routing requirements in multi-channel fixture electronics, while the multiplying architecture supports external scaling. Designers should verify output settling under the intended load, include local reference and supply bypassing, and isolate sensitive analog nodes from digital clock return currents.
Inirekomenda
Digital Potentiometer Emulation
A multiplying DAC can emulate the wiper behavior of a digital potentiometer when the output is configured with suitable reference and feedback components. The AD545KH provides an 8-bit family resolution, giving 256 programmable positions, and its serial control simplifies connection to embedded measurement or control electronics. Compared with a mechanical potentiometer, the converter offers repeatable digital control and can be recalibrated in software. The implementation must account for the converter's output impedance, reference tolerance, allowed loading, and noise behavior so that the resulting effective resistance or attenuation curve meets the target specification.
Inirekomenda
Programmable Gain and Offset
AD545KH can support programmable gain or offset blocks when a digital control word selects the converter output and an external analog network applies the required scaling. The 8-bit resolution provides 256 nominal code levels, which can be adequate for coarse gain positioning, calibration tables, or trim functions. Because the device is a multiplying DAC, the reference can also participate in output scaling, allowing one digital output to cover a programmable range. Engineers should account for reference tolerance and drift, buffer-input bias effects, and settling before changing a gain state during an active measurement.
Inirekomenda
Laboratory Signal Generation
The AD545KH can serve as a programmable low-level reference source in laboratory modules that require digitally selected analog outputs. Its serial interface is convenient for microcontrollers or test controllers, and the multiplying architecture allows the output scale to be established by a precision external reference. The 8-bit resolution is most appropriate for coarse level generation, supervisory adjustment, or calibration rather than high-fidelity waveform generation. The circuit should include stable reference bypassing, an output buffer suitable for the load, and analog grounding that prevents converter and digital-controller currents from sharing a noisy return path.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for AD545KH — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | AD5450JH | AD5450KZ | AD5451JH | AD5451KH | AD5451JZ |
|---|---|---|---|---|---|---|
| Package | 16-pin package | 16-pin package | 16-pin package | 16-pin package | 16-pin package | 16-pin package |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Product Type | Multiplying DAC | Multiplying DAC | Multiplying DAC | Multiplying DAC | Multiplying DAC | Multiplying DAC |
| Resolution | 8-bit | 8-bit | 8-bit | 10-bit | 10-bit | 10-bit |
| Digital Interface | Serial | Serial | Serial | Serial | Serial | Serial |
| Documented Pin Count | 16 pins | 16 pins | 16 pins | 16 pins | 16 pins | 16 pins |
| Output Scaling | Multiplying, reference dependent | Multiplying, reference dependent | Multiplying, reference dependent | Multiplying, reference dependent | Multiplying, reference dependent | Multiplying, reference dependent |
| Conversion Architecture | High-bandwidth family architecture | High-bandwidth family architecture | High-bandwidth family architecture | High-bandwidth family architecture | High-bandwidth family architecture | High-bandwidth family architecture |
| Special Features | Reference-scaled output | Reference-scaled output | Reference-scaled output | Reference-scaled output | Reference-scaled output | Reference-scaled output |
Pangunahing mga Pagkakaiba
- Exact AD5450 family alignment (kumpara saAD5451JH)
- Serial-interface implementation (kumpara saAD5450KZ)
- Reference-scaled output control (kumpara saAD5451KH)
Talaan ng Disenyo
Use the manufacturer mechanical drawing associated with the exact AD545KH suffix when defining the footprint, because a 16-pin count alone does not establish body size, pitch, or pad configuration. Place the serial-control traces away from the reference and analog-output nodes, provide a continuous ground reference beneath the device where the package permits, and route reference current back toward the source rather than through digital return paths.
Treat the external reference as a precision signal input. Keep its trace short, place bypass and local decoupling at the appropriate device pins, and avoid sharing the reference return with switching-node currents. Check reference source impedance against the converter's input-current behavior and confirm that the digital clock edge cannot inject meaningful transient error into the output settling window.
Do not substitute AD5451JH or AD5451KH without treating the resolution change as a functional difference: 10-bit provides 1024 code levels compared with 256 for the 8-bit AD5450 family member. Although the higher resolution can improve command granularity, it may alter output-code interpretation, calibration tables, settling behavior, and system noise. Revalidate the complete control sequence and analog output range.
Impormasyon ng Pagsunod sa Kautusan
The available product records do not state the individual compliance or qualification status for AD545KH.