Analog Devices

AD55/039Z-0 - High-Frequency Video Op Amp | Analog Devices

MPN: AD55/039Z-0 ✗ Tapus ng Buhay
8-lead DIP Package
MOQ: 1 |

AD55/039Z-0 Ulas

The Analog Devices AD55/039Z-0 is an ultrahigh-frequency operational amplifier intended for video circuits and RF amplifiers, supplied in an 8-lead DIP package. It supports stable operation at closed-loop gains greater than 5 without external compensation, combines high slew rate with wide bandwidth, and is positioned as a low-cost solution for demanding high-frequency signal chains. The associated Analog Devices AD5539 product information also states that every device is 100% DC tested against its guaranteed DC specifications over the full device temperature range.

An operational amplifier is a high-gain, active analog signal-conditioning component that compares an input signal with a feedback-defined reference. In the feedback system, the AD55/039Z-0 belongs to the operational-amplifier hierarchy and ultimately to the broader semiconductor category. High-speed operational amplifiers are selected when signal bandwidth, slew rate, output-drive capability, and distortion performance are more important than the very low offset and bias currents associated with precision amplifiers.

The principal feature of the AD55/039Z-0 is its combination of ultrahigh-frequency operation and internally compensated stability above a gain of 5. This allows designers to implement video and RF amplifier stages without adding external compensation networks in those operating conditions. The high slew rate improves the ability to reproduce large-amplitude, high-frequency waveforms, while the wide bandwidth is valuable when the input spectrum extends beyond the audio range. Its DC test coverage provides manufacturing assurance for the specified low-frequency performance.

The AD55/039Z-0 is intended for applications in which conventional general-purpose amplifiers would limit bandwidth or transient response. In video signal paths, the wide bandwidth and high slew rate help preserve fast edge information and large transition amplitudes. In RF amplifier and signal-conditioning stages, the ultrahigh-frequency architecture can support higher-frequency closed-loop operation. The manufacturer identifies stable operation at gains greater than 5 as an important simplification for practical circuit implementation.

Typical uses include video distribution and gain stages, RF signal conditioning, high-frequency instrumentation, communications interfaces, waveform shapers, and low-cost test fixtures. For lower closed-loop gains, external compensation may be required according to the manufacturer guidance. Designers should preserve the recommended feedback topology and verify stability, output swing, supply range, and load behavior against the device documentation before committing a design to production.

A primary design consideration is bandwidth allocation. The closed-loop gain, source and load impedances, PCB parasitics, and compensation requirements determine the usable operating bandwidth; simply operating the amplifier at a high nominal frequency does not guarantee acceptable time-domain behavior. Resistor placement, grounding, supply bypassing, and output-loading decisions should therefore be reviewed together with the target signal bandwidth and required gain.

This page consolidates the identified manufacturer functionality, package information, sourcing context, comparison fields, and practical engineering guidance for AD55/039Z-0. It also distinguishes the device from functional equivalents and clearly identifies which electrical and lifecycle details must be confirmed in the applicable Analog Devices documentation before layout or procurement decisions are finalized.

Mga alternatibo na pwedeng ilagay na AD55/039Z-0 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

AD5539Z

✅ Drop-In
📦 DIP-8
Manufacturer ordering code uses AD5539Z rather than the Rochester code AD55/039Z-0; the amplifier architecture is unchanged

📋 Alternatibo na Reference (hindi sa katalogo)

NE5539P

✅ Drop-In
📦 DIP-8
Functional NE5539 replacement with the same DIP-8 format; individual voltage, noise, offset, and slew-rate limits must be compared

📋 Alternatibo na Reference (hindi sa katalogo)

SE5539N

✅ Drop-In
📦 DIP-8
Functional SE5539 replacement with the same DIP-8 format; individual voltage, noise, offset, and bandwidth limits must be compared

📋 Alternatibo na Reference (hindi sa katalogo)

AD55/039Z-0 Mga Pinakamataas na Rating at Electrical Characteristics

Product Type Ultrahigh-frequency operational amplifier
Manufacturer Analog Devices
Associated Device AD5539
Minimum Stable Closed-Loop Gain Greater than 5 V/V
External Compensation Requirement Not required for closed-loop gains greater than 5 V/V
DC Test Coverage 100% DC tested to guaranteed DC specifications
Packhaging 8-lead DIP
Bilang ng Pin 8 pins
Uri ng Pagpapasok Through-hole

Pin Configuration ng AD55/039Z-0

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
Pin 1 NC — Not connected
Pin 2 IN- — Inverting input
Pin 3 IN+ — Noninverting input
Pin 4 V- — Negative supply connection
Pin 5 NC — Not connected
Pin 6 OUT — Amplifier output
Pin 7 V+ — Positive supply connection
Pin 8 NC — Not connected

Tipikal na mga Gamit

AD55/039Z-0 ay nararapat para sa 6 aplikasyons: Video Gain Stages, RF Signal Conditioning, High-Frequency Instrumentation, Communications Interfaces, Waveform Shaping, Low-Cost Test Fixtures.

📺

Video Gain Stages

The AD55/039Z-0 fits video gain stages because Analog Devices identifies the device for video circuits and provides stable operation at closed-loop gains greater than 5 without external compensation. Its ultrahigh-frequency architecture and wide bandwidth preserve fast transition information, while the high slew rate supports larger-amplitude video waveforms. The stage can be built around the recommended feedback network, with supply bypassing and ground-return routing placed close to the DIP device. Verify the required video gain, output swing, loading, and bandwidth against the circuit before release, since the datasheet guidance for operation below a gain of 5 calls for additional compensation.

🌐

RF Signal Conditioning

The AD55/039Z-0 is suitable for RF signal-conditioning stages that benefit from high bandwidth and high slew rate. The associated Analog Devices AD5539 is explicitly described for RF amplifiers, making the device relevant when conventional general-purpose amplifiers would restrict usable frequency or transient response. The amplifier should be used in the manufacturer-recommended feedback topology, with stable gains above 5 reducing the need for external compensation. Actual RF performance depends on source impedance, load impedance, trace parasitics, supply decoupling, and the required small-signal and large-signal response, all of which should be checked during schematic and layout review.

🔧

High-Frequency Instrumentation

The AD55/039Z-0 can serve in high-frequency instrumentation when measurement bandwidth and waveform reproduction matter more than precision-amplifier offset specifications. Its wide bandwidth supports higher-frequency closed-loop operation, and its high slew rate improves response to rapid input transitions. The manufacturer-recommended circuit can operate at gains greater than 5 without external compensation, simplifying repeatable test fixtures and front ends. Instrument designers must still budget for input and output parasitics, connector and trace loading, supply noise, and probe capacitance. The component’s 100% DC testing supports consistent low-frequency operation, but bandwidth, slew rate, and output-swing limits must be verified against the intended measurement range.

🌐

Communications Interfaces

The AD55/039Z-0 fits communications interface circuitry that requires rapid transitions and a bandwidth beyond the audio range. Its high slew rate helps maintain waveform shape when signals change quickly, while the wide bandwidth reduces the risk that the amplifier becomes the limiting element. For interface designs, operate the part in the recommended closed-loop configuration and use gains above 5 when appropriate to avoid external compensation requirements. Review back-termination, line capacitance, source impedance, and output drive before deployment. Because the available manufacturer information does not state every operating limit on this page, the complete AD5539 documentation should be used to confirm supply range, output swing, and stability.

📡

Waveform Shaping

The AD55/039Z-0 is appropriate for waveform-shaping circuits that must amplify fast-moving or large-amplitude signals without the slew limitations of lower-bandwidth amplifiers. Its ultrahigh-frequency design and high slew rate are the central benefits, while operation at closed-loop gains greater than 5 can be implemented without an external compensation network. Engineers should select resistor and capacitor values from the manufacturer guidance, observe the required feedback topology, and account for loading caused by the following stage. PCB trace length, ground separation, and local supply bypassing are especially important because high-frequency layout parasitics can alter stability and effective bandwidth.

🖥️

Low-Cost Test Fixtures

The AD55/039Z-0 supports low-cost high-frequency test fixtures where broad bandwidth and rapid transient response are required at an economical functional level. Analog Devices positions the associated AD5539 as a low-cost solution for complex high-frequency circuit problems, and every device is 100% DC tested against guaranteed DC specifications. The fixture designer can exploit stable operation above a gain of 5 to avoid extra compensation components in qualifying stages. Component selection should still consider connector loss, cable capacitance, input termination, output loading, and the allowable attenuation. The fixture must be calibrated at the frequencies of interest because DC test coverage alone does not establish complete frequency-domain performance.

Buod ng mga Inirekomendang Produkto

AD5539Z Manufacturer-orderable counterpart in the same DIP package Ginagamit sa: Video Gain Stages, RF Signal Conditioning, High-Frequency Instrumentation, Communications Interfaces, Waveform Shaping, Low-Cost Test Fixtures NE5539P Possible DIP-format functional replacement Ginagamit sa: Video Gain Stages, High-Frequency Instrumentation, Waveform Shaping SE5539N DIP-format functional replacement candidate Ginagamit sa: RF Signal Conditioning, Communications Interfaces, Low-Cost Test Fixtures
What is the AD55/039Z-0?
The AD55/039Z-0 is an Analog Devices ultrahigh-frequency operational amplifier intended for video circuits and RF amplifiers. According to the Analog Devices product information, it provides high slew rate, wide bandwidth, and stable operation at closed-loop gains greater than 5 without external compensation. The device is associated with the AD5539 family and is supplied in an 8-lead DIP package.
What are the key specifications of AD55/039Z-0 that engineers should know?
The AD55/039Z-0 is an ultrahigh-frequency, single operational amplifier with stable closed-loop operation above a gain of 5 V/V. According to the Analog Devices product page, the device combines high slew rate with wide bandwidth, requires no external compensation for gains greater than 5, and is 100% DC tested to its guaranteed DC specifications over the full device temperature range.
Where to download the AD55/039Z-0 datasheet PDF?
The AD55/039Z-0 datasheet should be obtained through the Analog Devices AD5539 product page at https://www.analog.com/en/products/ad5539.html. That manufacturer page provides the authoritative product documentation and links for the associated amplifier. Because the Rochester order code AD55/039Z-0 may have historical markings or packing codes, engineers should match the package, suffix, and ordering information before using the document.
Where can I find the AD55/039Z-0 pinout?
The AD55/039Z-0 uses an 8-lead DIP pin arrangement, with the functional pin names shown in the package diagram on this page. For design release, confirm every connection against the Analog Devices AD5539 datasheet and the exact suffix on the purchased device. In particular, verify supply connections, input pins, output, and no-connect positions before fabrication.
Is AD55/039Z-0 suitable for video amplifier applications?
Yes, the AD55/039Z-0 is specifically identified by Analog Devices for video circuits. Its ultrahigh-frequency architecture, wide bandwidth, and high slew rate support the reproduction of fast video transitions, while stable operation above a gain of 5 can simplify the implementation of closed-loop video gain stages. The usable bandwidth still depends on the selected gain, PCB layout, loading, and supply conditions.
Can AD55/039Z-0 be used in RF amplifiers?
Yes, Analog Devices identifies the associated AD5539 device as suitable for RF amplifiers. Its wide bandwidth and high slew rate are useful in high-frequency signal-conditioning stages where a general-purpose amplifier would limit signal fidelity. Designers must preserve the recommended feedback topology and verify closed-loop stability, source impedance, load impedance, and output swing for the intended RF operating range.
Does AD55/039Z-0 need external compensation?
No external compensation is required when the AD55/039Z-0 is operated at closed-loop gains greater than 5, according to the Analog Devices product information. External compensation may be needed at lower gains. The exact compensation network should be selected from the manufacturer guidance after accounting for the target gain, bandwidth, source resistance, load, and PCB parasitics.
AD55/039Z-0 vs AD5539 - which part should I select?
AD55/039Z-0 is the Rochester ordering code for the Analog Devices AD5539 amplifier, while AD5539 is the manufacturer base designation. The functional choice depends on the exact package and ordering suffix attached to the Rochester code. Verify that the package is 8-lead DIP and compare the complete suffix before treating either identifier as a drop-in ordering substitute.
When should I choose AD55/039Z-0 over a lower-bandwidth op amp?
Choose the AD55/039Z-0 when the signal path requires ultrahigh-frequency bandwidth, high slew rate, or stable closed-loop gain above 5. A lower-bandwidth amplifier may be preferable for audio, sensor conditioning, or precision applications where low offset, low bias current, and low noise dominate. The selection should be based on the required gain, bandwidth, output amplitude, and distortion target.
What is the best drop-in replacement for AD55/039Z-0?
The closest documented alternatives are AD5539Z, NE5539P, and SE5539N, each using an 8-lead DIP configuration, but every substitute must be checked for exact supply range, output swing, stability, and frequency-response requirements. The Analog Devices product information describes AD5539 as a replacement for NE/SE5539 devices. Use the Request a Quote form on this page to confirm the exact MPN, lifecycle status, and sourcing position.
Can NE5539P replace AD55/039Z-0?
NE5539P can be considered a DIP-format functional replacement, because the Analog Devices AD5539 is described as a replacement for NE/SE5539 devices and NE5539P uses an 8-lead DIP package. It is not automatically identical in every parameter. Confirm supply voltage, output swing, slew rate, bandwidth, DC offsets, noise, and stability against the original circuit before substitution.
What can replace AD55/039Z-0?
AD5539Z is the direct manufacturer-orderable counterpart to the Rochester AD55/039Z-0 code, while NE5539P and SE5539N are possible DIP-format functional replacements. The Analog Devices product page specifically describes AD5539 as a replacement for NE/SE5539 devices. Before replacing the component, confirm that the substitute meets the original circuit’s voltage, bandwidth, slew-rate, output-swing, and compensation requirements.
Is AD55/039Z-0 the same as SE5539N?
No, AD55/039Z-0 and SE5539N are not identical although they can occupy the same 8-lead DIP format. The AD55/039Z-0 is associated with Analog Devices AD5539, which the manufacturer describes as a replacement for NE/SE5539 devices. Exact interchangeability still depends on the original design’s supply voltage, signal gain, bandwidth, slew rate, output swing, and stability requirements.
Where to buy AD55/039Z-0 online?
Use the Request a Quote form on this page to request AD55/039Z-0 availability, order quantities, and lead time from XAIPART. The part is associated with the Analog Devices AD5539 family and is listed through multiple sourcing channels, but historical Rochester ordering codes can carry important suffix and packaging distinctions. Provide the complete desired MPN when submitting the request.
What is the price and lead time for AD55/039Z-0?
The current commercial terms for AD55/039Z-0 are handled through the Request a Quote form on this page. Because this is a historical Rochester ordering code for the AD5539 amplifier, availability and minimum order quantity can vary with the exact device marking, package, and sourcing condition. Submit the requested quantity and target project date so current supply and lead-time information can be returned.

Impormasyon ng Talumpati sa Engineering for AD55/039Z-0 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose AD55/039Z-0 when a high-frequency video or RF amplifier requires wide bandwidth, high slew rate, and stable closed-loop operation above a gain of 5. AD5539Z is the preferred alternative when a current manufacturer ordering code is desired for the same Analog Devices architecture and DIP format. Consider NE5539P or SE5539N only when the complete electrical requirements can be verified and the original circuit tolerates differences in offset, noise, supply range, slew rate, bandwidth, and output swing. For precision or low-frequency sensor conditioning, a lower-bandwidth precision amplifier may be a better engineering choice. For any substitution, verify the package pinout, supply requirements, compensation method, output drive, and stability before PCB release.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto AD5539Z NE5539P SE5539N
Package DIP-8 DIP-8 DIP-8 DIP-8
Brand Analog Devices Analog Devices Texas Instruments Texas Instruments
Product Type Ultrahigh-frequency operational amplifier Ultrahigh-frequency operational amplifier Operational amplifier Operational amplifier

Pangunahing mga Pagkakaiba

  • Stable high-gain operation without external compensation (kumpara saNE5539P)
  • Manufacturer-documented 100% DC testing (kumpara saSE5539N)
  • Direct manufacturer ordering path (kumpara saNE5539P)

Talaan ng Disenyo

Do not assume that the Rochester code AD55/039Z-0 is interchangeable with every AD5539 ordering suffix. Match the complete MPN, 8-lead DIP package, temperature grade, and manufacturer markings before releasing a purchase order or substitution. The Analog Devices AD5539 product page also identifies the amplifier as a replacement for NE/SE5539 devices, but that functional relationship does not make every electrical parameter identical.

Use the manufacturer-recommended feedback topology and keep the feedback loop physically short. High-frequency layout parasitics can reduce stability and alter the achievable bandwidth, particularly when the amplifier drives capacitive cable or connector loads. Place input and output grounding paths carefully, avoid long high-impedance nodes, and validate the final board with appropriate bandwidth, phase, and time-domain measurements.

Bypass the supply pins locally and follow the recommended capacitor values and ESR requirements in the Analog Devices documentation. The AD5539 requires correct positive and negative supply connections for its specified operating behavior. Verify output swing at the intended load and ensure that the power source can deliver the required transient current, because high slew-rate operation can increase the rate of output-current demand during fast signal transitions.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

Compliance status was not stated in the accessible manufacturer or distributor information. AEC-Q100 is not applicable to this analog amplifier unless a separate automotive-qualified ordering option is explicitly specified.

Data napatotohanan sa: 2026-11-18 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

AD55/039Z-0 datasheet AD55/039Z-0 specifications AD55/039Z-0 pinout AD55/039Z-0 datasheet pdf AD55/039Z-0 equivalent AD55/039Z-0 replacement AD55/039Z-0 DIP-8 amplifier AD55/039Z-0 video amplifier AD55/039Z-0 RF amplifier AD55/039Z-0 vs AD5539Z AD55/039Z-0 price AD55/039Z-0 stock Analog Devices AD55/039Z-0

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices AD55/039Z-0 AD5539 AD5539Z NE5539P SE5539N operational amplifier ultrahigh-frequency operational amplifier voltage amplifier analog signal conditioning semiconductor DIP-8 through-hole package closed-loop gain feedback network gain-bandwidth product slew rate video circuit RF amplifier external compensation DC testing surface mount RoHS REACH
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ