AD676BD - 16-Bit 100 kSPS Sampling ADC | Analog Devices
MPN: AD676BD ✗ Tapus ng BuhayAD676BD Ulas
A sampling ADC samples an analog input and converts it into a digital code for measurement, instrumentation, signal processing, and control systems. The AD676 belongs to the SAR ADC family, where successive approximation compares the sampled voltage against an internal DAC. Its parallel output presents all 16 result bits together rather than serializing them through a shift register, which supports simpler data capture at moderate clock rates.
The verified device data identifies 16-bit resolution, 100 kSPS conversion throughput, one SAR input, no missing codes, 1 LSB integral nonlinearity, 97 dB THD, 90 dB signal-to-noise-plus-distortion ratio, and 1 MHz full-power bandwidth. On-chip autocalibration digitally corrects internal nonlinearities. The parallel interface provides 16-bit output data, while the integrated sample-and-hold function reduces the external sampling circuitry required.
The AD676 datasheet also identifies dynamic and direct-current specifications. Dynamic parameters such as S/(N+D), THD, and IMD characterize signal-chain behavior, while DC parameters support precision measurement. The 28-CDIP mechanical format through-hole package is larger than modern leadless options but remains useful where through-hole construction, serviceability, and legacy instrument compatibility are priorities.
Typical uses include industrial measurement, process monitoring, audio and signal processing, data acquisition, and precision instrumentation. Design implementation must observe the manufacturer's analog, digital, reference, and power-supply requirements. Because acquisition accuracy depends on the complete signal chain, reference stability, source impedance, grounding, clock quality, and input bandwidth are as important as nominal converter resolution.
This page combines exact verified specifications, official documentation links, commercial availability references, and application guidance. It does not invent unreported electrical, environmental, pricing, pinout, or compliance values; unavailable engineering data remains explicitly identified in the specifications.
Mga alternatibo na pwedeng ilagay na AD676BD — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok AD676BD (parehas na form factor at footprint) — pagkakaiba sa Architecture, Autocalibration, Input Channels, Mounting Type, Package.
Wala ng magagamit na drop-in alternatibo para sa produkto na ito.
Hilingin ang AlternatiboAD676BD Mga Pinakamataas na Rating at Electrical Characteristics
| ADC Type | Successive-approximation sampling ADC |
| Architecture | Switched-capacitor charge redistribution |
| Pangangasiwaan | 16 bit |
| Rate ng Pagkupita | 100 kSPS |
| Conversion Time | 10 us |
| Input Channels | 1 input |
| Output Format | 16-bit parallel output |
| Output Codes | No missing codes |
| Integral Nonlinearity | 1 LSB |
| Total Harmonic Distortion | 97 dB |
| Signal-to-Noise Plus Distortion Ratio | 90 dB |
| Full-Power Bandwidth | 1 MHz |
| On-Chip Sample-and-Hold | Included |
| Autocalibration | On-chip autocalibration |
| Packhaging | 28-pin SBCDIP |
| Uri ng Pagpapasok | Through-hole |
Gabay sa Pin Configuration ng AD676BD 28-pin sbcdip
Pin configuration para sa AD676BD (28-pin sbcdip package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa AD676BD.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
AD676BD ay nararapat para sa 6 aplikasyons: Industrial Process Measurement, Precision Data-Acquisition Systems, Audio and Signal Processing, Legacy Test and Measurement Equipment, Instrumentation Signal Capture, Parallel Digital Control Systems.
Industrial Process Measurement
The AD676BD fits process instrumentation that requires deterministic acquisition and a 16-bit parallel result bus. Its 100 kSPS conversion rate, 10 us conversion time, and no-missing-codes specification support repeatable measurement of slowly changing or multiplexed sensor signals. Place the converter in a grounded analog section, use a stable reference, and follow the official AD676 input-conditioning requirements. The main design trade-off is the 28-CDIP footprint, which is larger and slower to assemble than a modern surface-mount ADC but can suit legacy or serviceable industrial instrumentation.
Inirekomenda
Precision Data-Acquisition Systems
The AD676BD is suitable for precision data-acquisition front ends that value a 16-bit parallel interface and on-chip sample-and-hold. At 100 kSPS, it captures 100,000 conversions per second while presenting each result on 16 parallel outputs, allowing capture logic to latch the code without serializing every bit. The supplied data specifies 1 LSB INL and no missing codes. Validate source settling, reference accuracy, acquisition time, and digital timing because those system parameters determine whether nominal converter performance is preserved.
Inirekomenda
Audio and Signal Processing
The AD676 can support audio or general signal-processing paths that require a 16-bit sampling ADC with 100 kSPS throughput. Verified dynamic specifications include 90 dB S/(N+D), 97 dB THD, and 1 MHz full-power bandwidth, providing useful evidence for distortion-sensitive designs. The parallel output simplifies connection to dedicated logic in a controlled system. Designers should still define an input anti-alias filter, clock source, and gain structure, and should compare the ADC’s frequency-domain performance with the complete front end.
Inirekomenda
Legacy Test and Measurement Equipment
The AD676BD is attractive for legacy test and measurement equipment that already uses 28-CDIP through-hole converters or requires a parallel acquisition bus. Its 16-bit resolution, 100 kSPS conversion rate, integrated sample-and-hold, and autocalibration address the core measurement chain without relying on a serial interface. The package also eases inspection and replacement in serviceable instruments. Modern redesigns should weigh its larger footprint and legacy packaging against newer converters with smaller packages, serial links, and integrated reference options.
Inirekomenda
Instrumentation Signal Capture
The AD676BD can capture instrumentation signals when a system needs direct 16-bit parallel digital data and predictable sampling timing. The 10 us conversion time corresponds to the documented 100 kSPS rate, while the on-chip sample-and-hold helps acquire the selected input. For bridge, sensor, or waveform signals, the surrounding circuit must provide suitable excitation, filtering, grounding, and input drive. Its 1 MHz full-power bandwidth should not be interpreted as 1 MHz conversion capability; applications above 100 kSPS would normally require a higher-speed converter.
Inirekomenda
Parallel Digital Control Systems
The AD676BD can serve as the analog measurement element in a parallel digital control system where converted values are latched directly into logic. Sixteen output lines provide the complete code in one transfer, avoiding the serial-clock and data-valid overhead of a serial ADC. A 100 kSPS rate is ample for many supervisory, positioning, and condition-monitoring loops, although actual loop bandwidth also depends on computation latency. Firmware must handle output coding, conversion timing, calibration, saturation, and any diagnostic range checks defined by the complete design.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for AD676BD — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Pangunahing mga Pagkakaiba
- Parallel acquisition output (kumpara saNo verified drop-in alternative available)
- Documented throughput and conversion time (kumpara saNo verified drop-in alternative available)
- Integrated acquisition and correction (kumpara saNo verified drop-in alternative available)
Talaan ng Disenyo
Follow the official AD676 datasheet for analog and digital supply connections, decoupling locations, and sequencing. Keep high-current return paths away from the converter’s reference and input-ground nodes. Because the supplied data does not state supply voltage or decoupling values, do not infer them; use the manufacturer’s named capacitors and layout requirements to avoid reference modulation and conversion noise.
Reserve the exact 28-pin SBCDIP footprint and verify pin numbering against the official package drawing before layout release. Route the analog input away from clock and parallel-output nets, maintain a compact reference return, and place required bypass capacitors at the pins specified by Analog Devices. The verified material establishes the package family but does not supply the complete pin map.
Design the analog front end around the documented 1 MHz full-power bandwidth and 100 kSPS conversion rate. Use an appropriate low-pass or anti-alias filter, control source impedance, and provide enough acquisition time for the internal sample-and-hold capacitor. Measured system noise and distortion depend on the source, reference, clock, grounding, and filtering—not only the ADC’s 16-bit nominal resolution.
Impormasyon ng Pagsunod sa Kautusan
The supplied verified results identify the manufacturer, converter architecture, resolution, throughput, interface, and package, but they do not provide formal RoHS, REACH, automotive, lead-free, halogen-free, or conflict-minerals declarations.
