Analog Devices

AD8011ARZ - Low-Power High-Speed Amplifier | Analog Devices

MPN: AD8011ARZ ✓ Nakahanda
+5 V Vdss 8-lead SOIC Package
MOQ: 1 |

AD8011ARZ Ulas

The Analog Devices AD8011ARZ is a low-power, high-speed current-feedback operational amplifier designed for +5 V or ±5 V operation, with one amplifier circuit in an 8-lead SOIC package. Its defining performance specification is gain flatness of 0.1 dB through 25 MHz, while low distortion, wide bandwidth, and low power consumption make it suitable for replacing higher-power high-speed amplifiers.

A current-feedback amplifier, or CFA, is a voltage-input, current-output feedback topology used to achieve high bandwidth and slew rate without the gain-bandwidth limitations associated with some voltage-feedback amplifiers. The AD8011 belongs to the broader operational-amplifier hierarchy and functions as an analog signal-conditioning IC for high-frequency, low-power signal chains.

The AD8011ARZ combines wide bandwidth with low power and low distortion. According to the Analog Devices product page, gain remains flat within 0.1 dB to 25 MHz. The device can operate from a single +5 V rail or from dual ±5 V supplies, providing flexibility for systems with different power architectures. Its low-power design is particularly valuable when several amplifiers must operate continuously within space-constrained equipment.

Unlike a general-purpose voltage-feedback amplifier, the AD8011 uses current feedback to support high-speed signal processing at comparatively low power. This architecture makes it appropriate for video amplification, instrumentation, communications, buffering, and other applications where wide bandwidth must be balanced against power consumption. Because current-feedback amplifiers have different gain-setting behavior from voltage-feedback devices, feedback resistor selection should follow the manufacturer’s recommended values for the intended gain.

Typical uses include video signal conditioning, communications-interface amplification, instrumentation, and general-purpose high-frequency amplification. The AD8011 is especially attractive where a +5 V supply is preferred to dual rails or where replacing a higher-power amplifier would reduce system heat without changing the PCB footprint.

The primary design consideration is the feedback network. Current-feedback amplifiers commonly require a specific feedback resistor at each gain point, and parasitic capacitance can affect stability. Use the manufacturer datasheet’s gain-setting table and keep feedback traces short and symmetric to preserve bandwidth and distortion performance.

This page combines the manufacturer’s product information, package details, application guidance, and a qualified replacement assessment. It also provides practical design notes for engineers evaluating AD8011ARZ in low-power video, communications, and instrumentation systems.

Mga alternatibo na pwedeng ilagay na AD8011ARZ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

AD8611

✅ Drop-In
📦 8-lead SOIC
The AD8611 is described as having lower supply current, while the AD8011 specifies 0.1 dB gain flatness through 25 MHz; confirm the exact AD8611 package and gain-setting requirements before substitution.

📋 Alternatibo na Reference (hindi sa katalogo)

AD8011ARZ Mga Pinakamataas na Rating at Electrical Characteristics

Amplifier Type Current-feedback operational amplifier
Number of Channels 1 channel
Single-Supply Operation +5 V
Dual-Supply Operation ±5 V
Gain Flatness 0.1 dB to 25 MHz
Packhaging 8-lead SOIC
Uri ng Pagpapasok Surface mount

Gabay sa Pin Configuration ng AD8011ARZ 8-lead soic

Pin configuration para sa AD8011ARZ (8-lead soic package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng 8-lead soic package para sa AD8011ARZ

Wala ng detalyadong pinout data na magagamit para sa AD8011ARZ.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

AD8011ARZ ay nararapat para sa 6 aplikasyons: Video Signal Conditioning, Communications Interface Amplification, Instrumentation Signal Chains, General-Purpose High-Speed Buffering, Industrial Control Signal Conditioning, Portable and Space-Constrained Equipment.

📺

Video Signal Conditioning

The AD8011ARZ fits video signal-conditioning circuits that require broad bandwidth without the power consumption of a high-current output stage. Analog Devices specifies gain flatness of 0.1 dB through 25 MHz, giving designers a concrete stability target across a substantial portion of the video band. The amplifier can be placed in a gain or buffer stage around source and processing components, subject to the required video standard. Its +5 V or ±5 V supply options support both compact single-rail systems and bipolar-signal architectures. Because the AD8011 uses current feedback, the feedback resistor should come from the manufacturer gain table rather than from a voltage-feedback design. Output swing and settling requirements must also be checked against the video waveform and load.

🌐

Communications Interface Amplification

The AD8011ARZ is appropriate for communications interface amplification when a design needs high-speed analog bandwidth from a low-power device. Its specified 0.1 dB gain flatness through 25 MHz supports signal conditioning above audio frequencies, while single +5 V operation can simplify portable or space-constrained equipment. The amplifier may be used ahead of an ADC, after a transducer, or within a line-interface signal path when the selected gain and bandwidth match the channel requirements. Current-feedback stability depends strongly on the gain-setting resistor and routing, so engineers should use the datasheet reference network. Verify input common-mode range, output swing, channel bandwidth, and isolation requirements for the exact communications standard before production use.

🏭

Instrumentation Signal Chains

The AD8011ARZ can serve in instrumentation signal chains that need more bandwidth than a general-purpose operational amplifier while keeping power consumption controlled. Its 0.1 dB gain flatness through 25 MHz is useful for conditioning intermediate-frequency or sensor-derived signals before digitization. The single-channel 8-lead SOIC package also permits a compact layout where one stage must operate close to the sensing or conversion circuitry. Designers should account for current-feedback gain-setting requirements, source impedance, and the interaction between input capacitance and the inverting node. For high-precision measurement systems, verify offset, noise, drift, common-mode range, and output accuracy directly against the manufacturer specifications rather than relying on general-purpose amplifier expectations.

🔧

General-Purpose High-Speed Buffering

The AD8011ARZ is suitable as a general-purpose high-speed buffer when a source requires isolation and gain control without the power burden of a large output stage. The manufacturer identifies the device as a general-purpose amplifier with wide bandwidth, low distortion, and low power, making it useful for routing signals between converter, driver, and monitoring blocks. Its +5 V or ±5 V supply flexibility allows the same device family to support different system rails. When operating near unity gain, use the manufacturer’s prescribed feedback network and verify stability with the actual source and load. Keep input and feedback connections short, provide the required bypass capacitance, and confirm that output loading does not reduce distortion or bandwidth below the system requirement.

🏭

Industrial Control Signal Conditioning

The AD8011ARZ can condition rapidly changing control or sensor signals in industrial systems where low power and useful high-frequency response are both important. Its 0.1 dB gain flatness through 25 MHz provides a documented basis for designs involving closed-loop control, transducer interfaces, or analog signal distribution. The 8-lead SOIC package simplifies routing on compact control boards, and +5 V operation can align with commonly used industrial logic levels. The implementation should include local supply bypassing, short feedback traces, and a datasheet-based gain resistor. Engineers must also validate input levels, output drive, noise sensitivity, and temperature behavior for the enclosure and operating environment. This part is best treated as a precision high-speed analog stage, not as a replacement for dedicated power or isolation circuitry.

📱

Portable and Space-Constrained Equipment

The AD8011ARZ suits portable instruments and compact test equipment that require high-frequency amplification without a high-power output stage. Analog Devices specifically describes the device as a low-power amplifier that can replace high-speed amplifiers consuming more power, while retaining wide bandwidth and low distortion. The +5 V operating option is useful where a single positive rail is preferred, and the compact 8-lead SOIC package leaves board area for converters, memory, and interface circuitry. Power efficiency is not enough by itself: the complete amplifier stage still needs the recommended feedback resistor, stable power bypassing, and careful routing. Confirm that battery-supply variation remains within the supported input range and that thermal performance is acceptable for the enclosure and maximum ambient temperature.

Buod ng mga Inirekomendang Produkto

AD8011ARZ Analog Devices Ginagamit sa: Video Signal Conditioning, Communications Interface Amplification, Instrumentation Signal Chains, General-Purpose High-Speed Buffering, Industrial Control Signal Conditioning, Portable and Space-Constrained Equipment AD8611 Low-power current-feedback evaluation candidate Ginagamit sa: Video Signal Conditioning, Communications Interface Amplification, Instrumentation Signal Chains, General-Purpose High-Speed Buffering, Industrial Control Signal Conditioning, Portable and Space-Constrained Equipment
What is the AD8011ARZ?
The AD8011ARZ is a single-channel, low-power, high-speed current-feedback operational amplifier from Analog Devices. According to the manufacturer product page, it operates from +5 V or ±5 V supplies and provides gain flatness of 0.1 dB through 25 MHz. It is packaged in an 8-lead SOIC and is intended for general-purpose, video, communications, and instrumentation amplification where wide bandwidth must be achieved with relatively low power consumption.
What is the AD8011ARZ used for?
The AD8011ARZ is used for low-power high-speed analog signal amplification, including video conditioning, communications interfaces, instrumentation, and general-purpose buffering. Analog Devices identifies wide bandwidth, low distortion, and low power as its principal benefits. Its 0.1 dB gain flatness through 25 MHz makes it useful where signal amplitude and phase must remain controlled across a broad frequency range without the power level of a conventional high-current output amplifier.
What supply voltage does the AD8011ARZ require?
The AD8011ARZ supports both +5 V and ±5 V power-supply arrangements. The Analog Devices product page specifically identifies +5 V and ±5 V as intended operating configurations. The single-supply option can simplify compact systems, while dual supplies may provide additional headroom for bipolar signal swings. Confirm input and output common-mode limits, output swing, and stability requirements in the manufacturer datasheet before selecting the supply arrangement.
How fast is the AD8011ARZ amplifier?
The AD8011ARZ maintains gain flatness of 0.1 dB through 25 MHz, according to the Analog Devices product page. This specification directly identifies the frequency range over which its gain variation is controlled. Exact small-signal bandwidth, slew rate, and gain-bandwidth product should be taken from the datasheet because those values are commonly measured at specified gains and output loading conditions.
Where can I download the AD8011ARZ datasheet PDF?
The official AD8011 product page on analog.com provides the AD8011 datasheet and supporting technical information. Open the AD8011 product page and select its data-sheet or technical documentation link to obtain the manufacturer PDF. The page is the preferred starting point because it also provides revision-specific ordering information and product updates that may not be visible in an indexed copy of the datasheet.
Where can I find the AD8011ARZ pinout?
The AD8011ARZ pin assignment is published in the manufacturer datasheet under the pin-configuration and ordering-information sections. The device uses an 8-lead SOIC package, and engineers should use the package drawing associated with AD8011ARZ when assigning PCB nets. Use the pin-description table and land-pattern dimensions in that documentation rather than relying on a generic 8-pin amplifier diagram.
What can replace the AD8011ARZ?
The AD8611 is a current-feedback amplifier candidate to evaluate when an 8-lead SOIC option and lower supply current are priorities. Analog Devices states that the AD8611 shares the pinout of the LT1016 and LT1394, but its AD8011ARZ replacement status still requires direct comparison of stability, gain-setting resistors, supply limits, common-mode range, and output swing. Board changes are not assumed without that engineering validation.
Is AD8611 the same as AD8011ARZ?
No, the AD8611 and AD8011ARZ are not identical devices even though both are current-feedback amplifiers with 8-lead SOIC availability. The AD8011ARZ is specified for +5 V or ±5 V operation with 0.1 dB gain flatness through 25 MHz, while Analog Devices describes the AD8611 as having lower supply current. Exact interchangeability depends on the AD8611 variant, pin assignment, gain-setting network, and electrical limits.
AD8011ARZ vs AD8611: which is better for a low-power design?
The AD8611 may be preferable when minimum supply current is the leading requirement, while the AD8011ARZ is the safer choice when its specified 0.1 dB gain flatness through 25 MHz and +5 V or ±5 V operating capability align with the design. Compare the actual gain, output swing, common-mode range, stability, and feedback-resistor requirements for the exact alternate package before making a drop-in decision.
When should I choose the AD8011ARZ over another high-speed amplifier?
Choose the AD8011ARZ when the design requires a single-channel current-feedback amplifier in an 8-lead SOIC, operates from +5 V or ±5 V, and benefits from 0.1 dB gain flatness through 25 MHz at relatively low power. Consider an alternate part only when its current consumption, gain behavior, bandwidth, input range, output swing, or package provides a documented advantage without requiring a board redesign.
Is the AD8011ARZ suitable for video signal conditioning?
Yes, the AD8011ARZ is suitable for video signal conditioning because it combines wide bandwidth, low distortion, and low power in an 8-lead SOIC package. Its 0.1 dB gain flatness through 25 MHz supports applications requiring controlled gain across a substantial video bandwidth. The actual signal amplitude, output swing, settling behavior, and required gain must still be checked against the system video standard and the manufacturer specifications.
What feedback resistor should be used with the AD8011ARZ?
The AD8011ARZ feedback resistor should be selected from the gain-setting table in the manufacturer datasheet because current-feedback amplifiers do not follow the same gain relationship as ordinary voltage-feedback amplifiers. Using the recommended resistor at the intended gain helps preserve bandwidth, distortion, and stability. Keep the feedback path short and follow the recommended layout, including the treatment of parasitic capacitance around the inverting input.
Does the AD8011ARZ support single 5 V supply operation?
Yes, the AD8011ARZ supports operation from a single +5 V supply as well as dual ±5 V supplies. According to the Analog Devices product page, both arrangements are intended for the device. Single-supply use can reduce board complexity, but the input common-mode range, output swing, signal offsets, and required gain must remain inside the datasheet limits for the selected supply configuration.
How do I set the gain of an AD8011ARZ circuit?
Set the AD8011ARZ gain using the feedback resistor value published for the desired gain in the manufacturer datasheet. Current-feedback amplifiers use a gain-dependent feedback network, so copying the resistor value from a voltage-feedback amplifier can produce incorrect bandwidth, peaking, or instability. Begin with the datasheet reference circuit and preserve short feedback routing during layout.
What are the key specifications of AD8011ARZ that engineers should know?
The key AD8011ARZ specifications are one amplifier channel, +5 V or ±5 V operation, 0.1 dB gain flatness through 25 MHz, low power consumption, low distortion, and an 8-lead SOIC package. These features place the device between general-purpose voltage-feedback amplifiers and higher-power high-speed stages. Confirm exact slew rate, bandwidth at each gain, supply current, noise, offset, and temperature limits from the manufacturer datasheet before finalizing the design.
Where to buy AD8011ARZ online and what is its lead time?
Use the Request a Quote form on this page to request AD8011ARZ availability, current lead time, minimum order quantity, and shipping options. The form allows the exact MPN and required package quantity to be reviewed without publishing a stale price figure. For production planning, request the manufacturer-supported lifecycle status and a committed delivery date for your scheduled build quantity.

Impormasyon ng Talumpati sa Engineering for AD8011ARZ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the AD8011ARZ when your signal path requires a current-feedback amplifier in an 8-lead SOIC, operates from +5 V or ±5 V, and values a documented 0.1 dB gain flatness through 25 MHz. It is particularly suitable for video, communications, instrumentation, and compact general-purpose designs where low power is more important than the absolute minimum supply current. Consider the AD8611 when lower supply current is the dominant requirement and its exact electrical ratings and feedback network satisfy the channel. Do not treat that relationship as automatically interchangeable: verify common-mode range, output swing, gain-dependent stability, noise, offset, bandwidth, and package markings. If the required gain, frequency, or output amplitude falls outside the AD8011 specifications, choose a different amplifier and redesign around its recommended network instead of forcing a board-compatible substitution.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto AD8611
Brand Analog Devices Analog Devices
Package 8-lead SOIC 8-lead SOIC option
Amplifier Architecture Current-feedback Current-feedback
Channel Count 1 channel 1 channel
Power Consumption Low power Lower supply current
Primary Use Low-power high-speed general-purpose and video amplification Low-power high-speed amplification

Pangunahing mga Pagkakaiba

  • Documented gain flatness for video and communications signal paths (kumpara saAD8611)
  • Single- and dual-rail supply architecture (kumpara saAD8611)
  • General-purpose low-power positioning (kumpara saAD8611)

Talaan ng Disenyo

Do not select the feedback resistor by copying a value from a voltage-feedback amplifier. The AD8011 uses current feedback, so the manufacturer gain table should determine the resistor for the intended gain. Begin with the documented reference circuit, preserve the recommended resistance and tolerance, and validate stability with the actual source impedance and load. An incorrect feedback network can reduce bandwidth or introduce peaking even when the amplifier itself operates within its voltage limits.

Keep the inverting input and feedback component close to the amplifier, and route the pair with minimal parasitic capacitance. Place supply-bypass capacitors near the relevant power pins and provide a low-impedance return path. Current-feedback circuits are particularly sensitive to feedback-loop layout, so avoid long traces, test-point discontinuities, and shared high-impedance routing between the input and feedback nodes.

The AD8011ARZ is designed to provide high-speed amplification at relatively low power, but the total system dissipation still depends on supply voltage, output current, ambient temperature, and copper area. Check the manufacturer operating limits and calculate worst-case dissipation from the actual output waveform. If the output can swing rail-to-rail during large-signal operation, include that condition in the thermal review rather than evaluating only the quiescent state.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The available product information does not provide explicit compliance declarations for the exact AD8011ARZ orderable part. RoHS and REACH status should be confirmed from the current manufacturer product documentation before regulatory use.

Data napatotohanan sa: 2026-11-18 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

ad8011arz reel7 AD8011ARZ datasheet AD8011ARZ datasheet pdf AD8011ARZ pinout AD8011ARZ equivalent AD8011ARZ replacement AD8011ARZ cross reference AD8011ARZ vs AD8611 AD8011ARZ SOIC-8 footprint AD8011ARZ application circuit Analog Devices AD8011ARZ AD8011ARZ price AD8011ARZ stock AD8011ARZ 25 MHz gain flatness

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices AD8011 AD8011ARZ AD8611 current-feedback amplifier CFA operational amplifier amplifier IC analog semiconductor gain flatness 0.1 dB 25 MHz single +5 V supply dual ±5 V supply 8-lead SOIC SOIC package family surface-mount package video signal conditioning communications interface amplification instrumentation signal chain feedback resistor low distortion low power RoHS REACH
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ