Analog Devices

AD8012ARM - 350MHz Dual Current Feedback Amplifier | Analog Devices

MPN: AD8012ARM ✓ Nakahanda
1.7 mA Vdss 8-MSOP Package
MOQ: 1 |

AD8012ARM Ulas

The Analog Devices AD8012ARM is a dual, low-power, current-feedback operational amplifier providing 350 MHz small-signal bandwidth while drawing 1.7 mA per amplifier, packaged in an 8-MSOP. The device combines two amplifiers in one surface-mount package, making it suitable for compact high-speed signal chains where low distortion, wide dynamic range, and low supply current are important. Its low offset of 1.5 mV and 0.02% differential gain error support accurate signal amplification in instrumentation and active-filter circuits.

A current-feedback amplifier is a feedback topology whose closed-loop bandwidth and stability depend on the feedback network rather than only on the open-loop gain. The AD8012ARM belongs to the operational-amplifier hierarchy and is intended for applications requiring high-frequency operation with controlled quiescent current. This makes it different from general-purpose voltage-feedback amplifiers, which may require greater supply current or provide different dynamic performance.

Key features include 350 MHz bandwidth, 1.7 mA supply current per amplifier, 1.5 mV offset voltage, 20 ns settling time, and low-power operation suited to portable and space-constrained equipment. The dual configuration provides two independent amplifiers in one package, reducing component count and simplifying PCB layout. The device is intended for high-frequency, wide-dynamic-range systems where low distortion and high speed are essential.

The AD8012ARM is a current-feedback amplifier rather than a conventional voltage-feedback amplifier, so feedback resistor selection is important to achieve the intended bandwidth and stability. The manufacturer specifies 0.02% differential gain and 0.06 degree differential phase, which are relevant in video and wideband signal conditioning. For applications requiring precise gain, the gain network and resistor tolerances should be selected according to the manufacturer's guidance rather than treated as a voltage-feedback design.

Typical applications include video signal conditioning, high-speed instrumentation, active filters, communications interfaces, and low-power portable equipment. The 8-MSOP package is appropriate for compact boards, while the two-amplifier configuration allows one package to implement differential or multi-channel signal paths. System-level performance still depends on supply decoupling, trace impedance, stable reference components, and careful routing of high-speed feedback nets.

Design with short feedback traces, low-inductance grounding, and decoupling placed close to the supply pins. Avoid long routes between the amplifier and feedback network because parasitic inductance can alter gain and stability in a 350 MHz-class circuit. Confirm the power-supply range, operating temperature, and absolute maximum ratings in the manufacturer datasheet before finalizing the design.

This page combines the manufacturer product information, distributor identification, replacement guidance, comparison data, and practical design notes for engineers evaluating the AD8012ARM. It highlights where the dual current-feedback topology is useful, how the 8-MSOP package affects layout, and which details must be checked when considering a replacement.

Mga alternatibo na pwedeng ilagay na AD8012ARM — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

AD8012ARMZ

✅ Drop-In
📦 8-MSOP
Same 8-MSOP format and dual current-feedback amplifier class; exact suffix and temperature-grade differences require ordering-guide confirmation

📋 Alternatibo na Reference (hindi sa katalogo)

AD8012ARM Mga Pinakamataas na Rating at Electrical Characteristics

Amplifier Type Dual current-feedback operational amplifier
Number of Channels 2 channels
Small-Signal Bandwidth 350 MHz
Supply Current per Amplifier 1.7 mA
Offset Voltage 1.5 mV
Differential Gain Error 0.02%
Differential Phase Error 0.06 degrees
Settling Time 20 ns
Packhaging 8-MSOP
Uri ng Pagpapasok Surface Mount
Bilang ng Pins 8 pins
AEC-Q100 Qualification Not applicable

Gabay sa Pin Configuration ng AD8012ARM 8-msop

Pin configuration para sa AD8012ARM (8-msop package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng 8-msop package para sa AD8012ARM

Wala ng detalyadong pinout data na magagamit para sa AD8012ARM.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

AD8012ARM ay nararapat para sa 6 aplikasyons: Video Signal Conditioning, High-Speed Active Filters, Communications Interface, Portable Instrumentation, Low-Power Data Acquisition, Medical and Industrial Sensor Interfaces.

📺

Video Signal Conditioning

The AD8012ARM fits wideband video conditioning because it provides 350 MHz small-signal bandwidth, 0.02% differential gain error, and 0.06 degree differential phase error. Two amplifiers are available in one 8-MSOP, allowing a board to implement gain, filtering, or buffering stages with reduced component count. The 20 ns settling characteristic supports high-speed signal paths. Designers should keep feedback components and traces short because the current-feedback topology is sensitive to layout parasitics. Supply decoupling and a low-impedance ground return remain essential for stable video performance.

🌐

High-Speed Active Filters

The AD8012ARM is appropriate for active filtering stages requiring both high bandwidth and low amplifier supply current. Its 350 MHz small-signal bandwidth and 20 ns settling time provide substantial operating speed, while 1.7 mA per amplifier limits power demand in portable or multi-stage systems. Two amplifiers per package can implement cascaded filter sections or separate signal paths. Because current-feedback amplifiers depend on their feedback network, component tolerances and parasitic capacitance must be included in filter-response calculations.

🌐

Communications Interface

The AD8012ARM can serve low-power receive or signal-conditioning paths in communications equipment where 350 MHz bandwidth is useful and each amplifier draws 1.7 mA. The dual configuration supports two channels or a differential arrangement within one 8-MSOP footprint, reducing board area relative to separate single amplifiers. The low offset of 1.5 mV helps preserve small-signal accuracy. Board implementation should use controlled impedance, short feedback paths, and local bypass capacitance to prevent high-frequency routing effects from degrading gain or phase.

🧩

Portable Instrumentation

The AD8012ARM suits compact instrumentation where two high-speed amplifier channels must operate with low power consumption. Each amplifier draws 1.7 mA, and the 350 MHz bandwidth supports fast sensor, buffer, or gain-stage functions. Its 1.5 mV offset voltage is useful for low-level signals, while the 8-MSOP package minimizes board area. Designers should verify input and output common-mode ranges for the selected operating point and provide stable reference components so that gain accuracy is not dominated by resistor tolerance.

📊

Low-Power Data Acquisition

The AD8012ARM is a practical choice for low-power data-acquisition front ends that need more bandwidth than general-purpose operational amplifiers while keeping each channel at 1.7 mA. The dual amplifier can condition two channels or support a push-pull stage, and its 20 ns settling time supports fast measurement settling. Signal-chain design should account for the amplifier's current-feedback behavior, resistor-network accuracy, and the conversion characteristics of the downstream device. Short routing and local supply bypassing help maintain predictable acquisition performance.

💊

Medical and Industrial Sensor Interfaces

The AD8012ARM can be used in sensor-interface modules where low amplifier power and high-frequency response are both valuable. The 350 MHz bandwidth handles fast sensor outputs, the 1.5 mV offset supports low-amplitude measurement, and dual channels can reduce the footprint of a compact conditioning module. For medical or industrial systems, engineers must also evaluate noise, electromagnetic interference, isolation, and operating-temperature requirements for the complete signal chain. The 8-MSOP footprint simplifies board integration but still requires careful grounding and feedback-layout control.

Buod ng mga Inirekomendang Produkto

AD8012ARM Analog Devices Ginagamit sa: Video Signal Conditioning, High-Speed Active Filters, Communications Interface, Portable Instrumentation, Low-Power Data Acquisition, Medical and Industrial Sensor Interfaces AD8012ARMZ Closely related 8-MSOP dual amplifier Ginagamit sa: Video Signal Conditioning, High-Speed Active Filters, Communications Interface, Portable Instrumentation, Low-Power Data Acquisition, Medical and Industrial Sensor Interfaces
What is the AD8012ARM?
The AD8012ARM is a dual current-feedback operational amplifier from Analog Devices with 350 MHz small-signal bandwidth and 1.7 mA supply current per amplifier. According to the Analog Devices AD8012 product page, it is intended for high-frequency, wide-dynamic-range systems where low distortion, high speed, and low power are essential. Both amplifiers are integrated in an 8-MSOP package.
What are the key specifications of AD8012ARM that engineers should know?
The AD8012ARM provides 350 MHz bandwidth, 1.7 mA supply current per amplifier, 20 ns settling time, 1.5 mV offset voltage, 0.02% differential gain error, and 0.06 degree differential phase error. According to the Analog Devices AD8012 product page, these characteristics support low-power, high-speed, wide-dynamic-range signal chains in an 8-MSOP package.
How does the AD8012ARM current-feedback topology affect design?
The AD8012ARM requires feedback-network design appropriate for a current-feedback amplifier rather than copying a voltage-feedback amplifier layout. Its 350 MHz bandwidth makes feedback traces, resistor placement, grounding, and power decoupling important. Analog Devices states that the AD8012 is intended for high-frequency systems, so short feedback paths and controlled board layout help preserve the intended stability and signal performance.
What is the difference between AD8012ARM and AD8012ARMZ?
The AD8012ARM and AD8012ARMZ are identified as 8-MSOP, two-channel current-feedback amplifiers from Analog Devices. The available comparison information characterizes the ARMZ as a similar replacement with consistent functional characteristics, but the exact ordering-code and temperature-grade differences should be confirmed against the manufacturer ordering guide before substitution. Both use the same 8-MSOP package format.
Is AD8012ARM suitable for video signal conditioning?
Yes, the AD8012ARM is suitable for video signal conditioning because its 350 MHz bandwidth accommodates high-frequency video signals and its differential gain error is 0.02%. According to Analog Devices, the differential phase error is 0.06 degrees, making the amplifier relevant to wideband video paths. The offset voltage of 1.5 mV also supports accurate low-level signal handling.
What applications are recommended for AD8012ARM?
The AD8012ARM fits video amplifiers, active filters, high-speed instrumentation, communications signal conditioning, and low-power portable equipment. Its dual 350 MHz amplifiers and 1.7 mA per-amplifier supply current allow multiple high-frequency functions to share one compact 8-MSOP package. The choice is strongest where bandwidth and low power matter more than the slow-slew behavior of general-purpose amplifiers.
Can AD8012ARMZ replace AD8012ARM?
AD8012ARMZ is the closest identified drop-in candidate because it is also an 8-MSOP, two-channel current-feedback amplifier from Analog Devices. Cross-reference information describes its functional characteristics as similar to the AD8012ARM. Before production substitution, verify the ordering code, temperature grade, supply limits, and absolute maximum ratings against the manufacturer datasheet and ordering guide.
What is the best drop-in replacement for AD8012ARM?
AD8012ARMZ is the best directly identified drop-in replacement because it retains the same manufacturer, 8-MSOP package format, dual current-feedback topology, and 350 MHz amplifier class. No other pin-compatible, same-package replacement with verified public cross-reference information was identified. Validate the exact suffix, temperature range, and electrical limits before treating the replacement as production-equivalent.
Where to download the AD8012ARM datasheet PDF?
The official AD8012 product page on Analog Devices is the correct starting point for the AD8012ARM datasheet and supporting documentation. It describes the device as a dual, low-power, current-feedback amplifier with 350 MHz bandwidth and 1.7 mA supply current per amplifier. Use the datasheet, ordering guide, and package drawings for pin assignments, ratings, and suffix details.
Where can I find the AD8012ARM pinout?
The AD8012ARM pinout should be taken from the package drawing and pin-description table in the Analog Devices AD8012 documentation. The component is an 8-MSOP package, but the manufacturer page excerpt does not reproduce individual terminal names or numbers. Use the official datasheet and package drawing when assigning PCB tracks rather than relying on a generic MSOP outline.
How should current-feedback resistors be selected for AD8012ARM?
Feedback resistors for the AD8012ARM should be selected using the manufacturer's current-feedback guidance because closed-loop bandwidth is set by the feedback network rather than by a conventional gain equation alone. Start from the datasheet's recommended values for the intended gain, then account for resistor tolerance and parasitic capacitance. Keep the feedback components close to the relevant amplifier pins to limit inductive effects at high frequency.
What PCB layout practices are important for AD8012ARM?
Place the input, output, feedback, and bypass connections as short as practical, and use a low-inductance ground return beneath the 8-MSOP device. According to Analog Devices, the AD8012 is optimized for high-frequency, wide-dynamic-range systems; therefore, long feedback loops or poorly placed decoupling can affect gain, phase, and stability. Keep supply traces short and place the bypass capacitor adjacent to the relevant supply pin.
Where can I request a quote and current lead time for AD8012ARM?
Use the Request a Quote form on this page to request current commercial terms, stock confirmation, minimum order quantity, and lead time for AD8012ARM. The Request a Quote workflow provides the appropriate route for a quote-based electronic-component purchase. Designers should also state the required package suffix and production quantity when submitting the request.
Is AD8012ARM in stock?
The AD8012ARM is identified as an active Analog Devices product with current distributor catalog entries and inventory references. Stock levels can change rapidly by package suffix and order quantity, so use the Request a Quote form on this page for a current availability check. Include the exact AD8012ARM ordering code when requesting a supply commitment.
When should I choose AD8012ARM over a general-purpose operational amplifier?
Choose AD8012ARM when the design needs a dual 350 MHz current-feedback amplifier with 1.7 mA supply current per channel. It is better suited than a general-purpose amplifier for wideband video, active filtering, and compact high-speed instrumentation. The trade-off is more sensitive feedback-network layout, so the board must support short, controlled high-frequency paths.

Impormasyon ng Talumpati sa Engineering for AD8012ARM — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the AD8012ARM when a compact 8-MSOP dual current-feedback amplifier is needed for wideband video, active filtering, communications signal conditioning, or low-power instrumentation. Its 350 MHz bandwidth, 20 ns settling time, 1.5 mV offset, and 1.7 mA supply current per amplifier provide a useful combination of speed and low power. AD8012ARMZ is the closest identified drop-in option because it retains the same package format and amplifier class, but the exact suffix and temperature grade should be checked before substitution. Avoid choosing either device when a unity-gain-stable voltage-feedback amplifier with rail-to-rail input or output would simplify the design. For high-speed layouts, treat the feedback network and grounding as active circuit elements, and confirm all electrical limits against the manufacturer datasheet.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto AD8012ARMZ
Brand Analog Devices Analog Devices
Package 8-MSOP 8-MSOP
Amplifier Type Dual current-feedback operational amplifier Dual current-feedback operational amplifier
Number of Channels 2 channels 2 channels
Small-Signal Bandwidth 350 MHz 350 MHz
Supply Current per Amplifier 1.7 mA 1.7 mA
Offset Voltage 1.5 mV 1.5 mV
Settling Time 20 ns 20 ns
Differential Gain Error 0.02% 0.02%
Differential Phase Error 0.06 degrees 0.06 degrees

Pangunahing mga Pagkakaiba

  • Combines two high-speed amplifiers in one package (kumpara saAD8012ARMZ)
  • Low power for a 350 MHz amplifier class (kumpara saAD8012ARMZ)
  • Strong video matching characteristics (kumpara saAD8012ARMZ)

Talaan ng Disenyo

Place the AD8012ARM close to the source and load circuitry, and route the feedback network with short traces. Current-feedback amplifiers can develop unexpected peaking or ringing when feedback-loop inductance and parasitic capacitance become significant at high frequency. Keep the feedback resistor close to the relevant amplifier pin and use a continuous ground reference beneath the device.

Place the bypass capacitor immediately adjacent to the power-supply pin and keep the supply trace short. Although each amplifier draws only 1.7 mA, high-frequency output current and feedback-edge activity can still create local supply transients. Use a low-inductance connection between the capacitor, device, and ground plane to maintain predictable operation at the device's 350 MHz bandwidth.

Do not reuse a conventional voltage-feedback gain formula without checking the AD8012 current-feedback recommendations. Select feedback resistors for the intended closed-loop gain using the manufacturer guidance, then evaluate resistor tolerance and parasitic capacitance. In video and communication paths, also check differential gain and phase behavior across the required frequency range.

Avoid treating the AD8012ARM and AD8012ARMZ ordering suffixes as interchangeable without checking the temperature grade and ordering guide. The 8-MSOP outline is the same, but the complete part designation determines commercial and technical conditions. Confirm pin functions, absolute maximum ratings, supply range, and lead-finish information from the manufacturer documentation before releasing a production BOM.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified for this ordering code. The device is an operational amplifier rather than an automotive-qualified component, so AEC-Q100 is not applicable.

Data napatotohanan sa: 2026-11-18 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

AD8012ARM AD8012ARM datasheet AD8012ARM specifications AD8012ARM pinout AD8012ARM datasheet pdf AD8012ARM equivalent AD8012ARM replacement AD8012ARM vs AD8012ARMZ AD8012ARM 350MHz amplifier AD8012ARM 8-MSOP AD8012ARM video amplifier AD8012ARM price AD8012ARM stock Analog Devices AD8012ARM

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices AD8012ARM AD8012ARMZ AD8012 current-feedback amplifier operational amplifier high-speed amplifier low-power amplifier 350 MHz bandwidth 1.7 mA supply current 20 ns settling time 1.5 mV offset voltage differential gain error differential phase error 8-MSOP MSOP package family surface-mount package SMD feedback network video signal conditioning active filter communications interface sensor interface low-power instrumentation
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ