AD841SH - 40MHz Unity-Gain Op Amp | Analog Devices
MPN: AD841SH ✓ NakahandaAD841SH Ulas
An operational amplifier is an active analog building block that amplifies the voltage difference between its differential inputs while offering very high open-loop gain. The AD841 belongs to the hierarchy of operational amplifiers, analog amplifiers, signal-conditioning ICs, and semiconductor components. Unlike an instrumentation amplifier, the AD841 is a single general-purpose amplifier that can also perform buffering, scaling, summing, filtering, and impedance-conversion functions when its feedback network and stability requirements are respected.
The AD841's principal features include 40 MHz gain-bandwidth product, unity-gain stability, 300 V/µs slew rate, and 50 mA minimum output-current drive. These specifications make it effective for preserving large-amplitude, high-frequency signals without excessive gain compression. According to the manufacturer datasheet, the devices are fabricated using a junction-isolated complementary bipolar process, allowing high-speed operation while supporting conventional single-supply or dual-supply circuit arrangements.
The AD842 is identified as a closely related member of the same wideband, high-precision amplifier family. The manufacturer states that the AD842 is stable at a gain of two or greater and has at least 100 mA output-current drive, which is twice the 50 mA minimum drive stated for the AD841. The AD841 is unity-gain stable, making it the more direct choice when closed-loop gain near one is required. Fast settling is especially useful in pulse, waveform-generation, data-acquisition, and active-filter applications where reduced acquisition time can improve system throughput.
Typical uses include video and imaging signal chains, precision current-to-voltage conversion, instrumentation interfaces, laboratory instrumentation, communications equipment, and analog signal-processing blocks. The 40 MHz bandwidth is suitable for moderate-frequency waveform conditioning, while the 300 V/µs slew rate helps maintain fidelity for rapidly changing signals. The 50 mA output drive also permits useful load current for downstream stages when voltage headroom remains adequate.
When laying out an AD841SH circuit, keep feedback traces short, provide local supply bypassing, and avoid driving capacitive loads directly unless the load and stability conditions are verified. Because the AD841 is unity-gain stable, unity-gain feedback is appropriate for high-bandwidth buffer service; higher gain configurations offer more bandwidth per closed-loop stage and can improve signal-to-noise performance.
This product record combines the AD841 family description, package and electrical characteristics, lifecycle-oriented sourcing information, selection guidance, and practical circuit considerations. It also separates confirmed manufacturer data from parameters that require confirmation from the ordering code, helping engineers evaluate the AD841SH before committing a high-speed analog design to production.
Mga alternatibo na pwedeng ilagay na AD841SH — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
AD841SH/883B
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
AD841AH
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
AD841CH
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
AD841EH
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
AD841GH
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
AD841SH Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | Single wideband operational amplifier |
| Gain-Bandwidth Product | 40 MHz |
| Slew Rate | 300 V/µs |
| Minimum Output Current Drive | 50 mA |
| Kuru-kuryente ng Pagbibigay | 11 mA |
| Maximum Supply Voltage | ±18 V |
| Unity-Gain Stable | Yes |
| Settling Behavior | Fast settling |
| Process Technology | Junction-isolated complementary bipolar (CB) process |
| Amplifier Configuration | Single amplifier |
| Signal Class | General-purpose precision high-speed analog |
| Package Pin Count | 8 pins |
| Tindminan RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
Gabay sa Pin Configuration ng AD841SH 8 pins
Pin configuration para sa AD841SH (8 pins package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa AD841SH.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
AD841SH ay nararapat para sa 6 aplikasyons: High-Speed Precision Buffer, Pulse and Fast-Waveform Conditioning, Video and Imaging Signal Chain, Current-to-Voltage Conversion, Active Filter and Frequency-Shaping Stage, Laboratory and Communications Instrumentation.
High-Speed Precision Buffer
The AD841SH is suited to unity-gain buffering because the manufacturer identifies the AD841 as unity-gain stable and fast settling. Its 40 MHz gain-bandwidth product preserves moderate-bandwidth signals, while the 300 V/µs slew rate reduces distortion when the input contains fast transitions. The stated 50 mA output-current drive is useful for moderate capacitive or resistive loading, although the exact load must remain within the amplifier's operating limits. Place the feedback connection close to the output and use short signal paths to limit parasitic feedback and preserve the achieved bandwidth.
Inirekomenda
Pulse and Fast-Waveform Conditioning
The AD841SH fits pulse and rapidly changing waveform conditioning because its 300 V/µs slew rate and fast-settling behavior reduce the time required for large-signal transitions. A 40 MHz gain-bandwidth product provides useful closed-loop bandwidth when configured with an appropriate feedback network. The 11 mA supply current supports low-power signal-path operation, while 50 mA output-current drive permits moderate downstream loading. Engineers should verify output swing and capacitive-load stability at the selected supply voltage and gain.
Inirekomenda
Video and Imaging Signal Chain
The AD841SH can condition moderate-bandwidth video or imaging signals where unity-gain operation and fast large-signal response are important. Its 40 MHz gain-bandwidth product supports a broad analog signal band, and the 300 V/µs slew rate helps maintain waveform fidelity during transitions. The single-amplifier architecture simplifies routing where a buffer, gain stage, or active summing function is required. Layout should use short traces, solid ground return paths, and local bypass capacitors, while the designer confirms output-swing and loading requirements for the specific video source.
Inirekomenda
Current-to-Voltage Conversion
The AD841SH is appropriate for precision current-to-voltage conversion when the source is low impedance and the amplifier can operate close to unity gain. Its 40 MHz gain-bandwidth product accommodates relatively fast current signals, while the 300 V/µs slew rate supports rapid output changes. The 50 mA output-current drive and 11 mA supply current provide a useful combination for instrumentation interfaces. The feedback resistor and optional compensation network determine stability and conversion gain, so their values should be checked against the source capacitance and the amplifier's feedback recommendations.
Inirekomenda
Active Filter and Frequency-Shaping Stage
The AD841SH can implement active filtering and frequency-shaping stages that require more bandwidth than a general-purpose low-speed amplifier. Its 40 MHz gain-bandwidth product provides a useful operating margin for moderate-frequency filters, and the 300 V/µs slew rate improves large-signal behavior. Unity-gain stability permits direct follower configurations, while higher closed-loop gains can increase bandwidth per stage. Component tolerances, parasitic capacitance, and source or load impedance should be evaluated because they determine the actual filter response and stability margin.
Inirekomenda
Laboratory and Communications Instrumentation
The AD841SH supports laboratory and communications instrumentation requiring accurate high-speed amplification without the complexity of a dedicated fixed-gain amplifier. The 40 MHz gain-bandwidth product, 300 V/µs slew rate, and fast settling are useful for acquisition front ends, signal generators, and interface stages. Its unity-gain stability supports transparent buffering, while the complementary bipolar process provides the amplifier family with high-speed performance. Confirm exact offset, bias-current, noise, and common-mode specifications from the ordering-code data before using it in precision measurement chains.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for AD841SH — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | AD841SH/883B | AD841AH | AD841CH |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Product Family | AD841 wideband operational amplifier | AD841 wideband operational amplifier | AD841 wideband operational amplifier | AD841 wideband operational amplifier |
| Gain-Bandwidth Product | 40 MHz | 40 MHz family value | 40 MHz family value | 40 MHz family value |
| Slew Rate | 300 V/µs | 300 V/µs family value | 300 V/µs family value | 300 V/µs family value |
| Minimum Output Current Drive | 50 mA | 50 mA family value | 50 mA family value | 50 mA family value |
| Supply Current | 11 mA | 11 mA family value | 11 mA family value | 11 mA family value |
| Unity-Gain Stable | Yes | Yes | Yes | Yes |
| Maximum Supply Voltage | ±18 V | ±18 V family value | ±18 V family value | ±18 V family value |
| Process Technology | Junction-isolated complementary bipolar (CB) process | Junction-isolated complementary bipolar (CB) process | Junction-isolated complementary bipolar (CB) process | Junction-isolated complementary bipolar (CB) process |
Pangunahing mga Pagkakaiba
- Unity-gain operation is explicitly supported (kumpara saAD842)
- Family-compatible selection path (kumpara saAD841SH/883B)
- Balanced speed and output drive (kumpara saAD842)
Talaan ng Disenyo
Route the feedback network directly between the amplifier output and its inverting input, and keep the non-inverting input path short and away from high-current switching nodes. Because the AD841 is unity-gain stable and capable of 300 V/µs slew rate, excessive feedback-loop delay can reduce phase margin and make high-speed layouts sensitive. Confirm the exact package pin numbering from the ordering-specific package drawing before releasing artwork.
Place the supply-bypass capacitors close to the power pins and connect them to a low-impedance ground plane. Estimated dissipation is the total supply span multiplied by the stated 11 mA supply current: at ±18 V, the span is 36 V and the estimated amplifier dissipation is 396 mW before including load-current effects. Confirm ambient temperature and package thermal constraints with the complete ordering code before using this estimate for a thermal design.
Do not assume that every AD841 ordering suffix has identical environmental screening or temperature limits. Confirm the AD841SH package drawing, pinout, temperature range, and qualification requirements in the manufacturer ordering information. Likewise, verify output swing, common-mode range, offset, noise, and load capability for the exact grade before treating it as a drop-in replacement in an existing design.
Impormasyon ng Pagsunod sa Kautusan
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified for the exact AD841SH ordering code.