Analog Devices

AD848SQ - High-Speed Low-Power Op Amp | Analog Devices

MPN: AD848SQ ✗ Tapus ng Buhay
8-pin CERDIP Package
MOQ: 1 |

AD848SQ Ulas

The Analog Devices AD848SQ is a high-speed, low-power monolithic operational amplifier packaged in an 8-pin CERDIP. It is internally compensated for stable operation at closed-loop gains of 5 or greater, making it appropriate for signal chains that require substantial closed-loop gain rather than unity-gain operation. The device belongs to the operational-amplifier hierarchy, where an operational amplifier provides voltage gain, filtering, buffering, impedance conversion, and analog signal conditioning within a larger electronic system.

The AD848 family is designed to balance bandwidth, power consumption, and general-purpose analog performance. According to the Analog Devices AD848/AD849 datasheet, the AD848 and AD849 are members of the same high-speed operational-amplifier family. Their internal compensation differs: the AD848 is stable for closed-loop gains of 5 or greater, whereas the AD849 is fully decompensated and stable at gains greater than 24. This difference is important because substituting one for the other without evaluating loop gain can produce instability.

The AD848SQ is supplied in the SQ ceramic-DIP package, with the exact environmental grade and ordering information identified by the SQ suffix. Its standard general-purpose listing describes a one-circuit, 8-CERDIP operational amplifier. Designers should use the manufacturer's pin-description table in the datasheet when assigning PCB tracks, particularly when laying out a high-speed analog circuit around a ceramic DIP footprint.

The minimum stable closed-loop gain of 5 makes the AD848SQ suitable for instrumentation preamplifiers, waveform-shaping stages, video-signal conditioning, communications-interface circuits, and analog measurement systems that operate with meaningful closed-loop gain. Its high-speed character is advantageous when signals must be amplified without excessive propagation delay, although board layout, load capacitance, supply bypassing, and feedback-loop design remain critical to realized performance.

The AD848 is related to other Analog Devices high-speed amplifiers identified in the manufacturer datasheet. The AD847 is unity-gain stable and has a 50 MHz gain-bandwidth product, while the AD840, AD841, and AD842 provide greater precision and output-current drive. These devices are useful design references when the AD848's minimum gain of 5 is unsuitable, but they should not be treated as unconditional replacements without checking package, pinout, stability, bandwidth, supply requirements, and output-drive characteristics.

For layout, place input, feedback, and bypass connections as compactly as practical, and maintain a short, low-impedance ground return. Decouple each supply connection near the device and keep sensitive input routing away from fast output and clock lines. Because the AD848 is internally compensated for gains of 5 or greater, confirm the complete feedback network, source impedance, load, and output amplitude before production.

This page combines the manufacturer's product and datasheet information with practical guidance for stability, layout, application selection, and package-related sourcing. It distinguishes the AD848 from the decompensated AD849 and unity-gain-stable AD847, helping engineers select the correct high-speed amplifier without overlooking the closed-loop-gain constraints that govern this device family.

Mga alternatibo na pwedeng ilagay na AD848SQ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

AD848SQ/883B

✅ Drop-In
📦 8-pin CERDIP
Military-style 883B ordering suffix; electrical gain-stability requirement remains 5 or greater, with environmental qualification requiring review

📋 Alternatibo na Reference (hindi sa katalogo)

AD848AQ

✅ Drop-In
📦 8-pin CERDIP
AQ temperature-grade suffix replaces SQ; the AD848 family's minimum stable closed-loop gain remains 5 or greater

📋 Alternatibo na Reference (hindi sa katalogo)

AD849SQ

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 8-pin CERDIP
Fully decompensated for gains greater than 24 rather than the AD848's gain of 5 or greater, a minimum-gain change of at least 19

📋 Alternatibo na Reference (hindi sa katalogo)

AD849AQ

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 8-pin CERDIP
AQ temperature-grade variant of the decompensated AD849; stable only above gain 24 rather than at gain 5 or greater

📋 Alternatibo na Reference (hindi sa katalogo)

AD847SQ

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 8-pin CERDIP
Unity-gain stable with a 50 MHz gain-bandwidth product, unlike the AD848's minimum stable gain of 5; requires stability and full electrical verification

📋 Alternatibo na Reference (hindi sa katalogo)

AD848SQ Mga Pinakamataas na Rating at Electrical Characteristics

Product Type High-speed, low-power monolithic operational amplifier
Number of Circuits 1 circuit
Minimum Stable Closed-Loop Gain 5 or greater
Compensation Internally compensated
Packhaging 8-pin CERDIP
Uri ng Pagpapasok Through-hole

Gabay sa Pin Configuration ng AD848SQ 8-pin cerdip

Pin configuration para sa AD848SQ (8-pin cerdip package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng 8-pin cerdip package para sa AD848SQ

Wala ng detalyadong pinout data na magagamit para sa AD848SQ.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

AD848SQ ay nararapat para sa 6 aplikasyons: Instrumentation Preamplifier, Video Signal Conditioning, Communications Interface, Waveform Shaping, Precision Analog Measurement, Data Acquisition Front End.

🏭

Instrumentation Preamplifier

The AD848SQ fits instrumentation preamplifier stages that operate at closed-loop gains of 5 or greater and require a high-speed monolithic operational amplifier. Its internally compensated architecture simplifies feedback design when the gain requirement is known at the outset. In a sensor-conditioning path, the amplifier can raise a low-level signal before a subsequent ADC or filter, reducing the amplitude range that the converter must resolve. The important trade-off is that the circuit cannot be treated as unity-gain stable: gain below 5 requires compensation or a different amplifier. Verify the input common-mode range, bias current, offset voltage, and output swing against the sensor interface because those characteristics determine usable headroom.

📺

Video Signal Conditioning

The AD848SQ can serve in high-speed video gain and conditioning stages where the signal is amplified with a closed-loop gain of 5 or greater. Its high-speed monolithic design is useful for waveform shaping, edge processing, and gain normalization rather than slow precision-only measurements. The designer should establish that the intended bandwidth, slew rate, output swing, and load are adequate for the video signal before layout begins. Short feedback paths and careful return routing are particularly important because parasitic capacitance can alter stability and bandwidth. If the stage must operate near unity gain, the internally compensated AD848 is unsuitable without added compensation, so an amplifier explicitly characterized for that gain should be selected.

🌐

Communications Interface

AD848SQ is applicable to communications-interface signal paths that need a nonzero gain of at least 5, including transmit-chain gain blocks, receive-chain gain stages, and interface conditioning circuits. The high-speed architecture supports rapid signal transitions, while internal compensation favors stable operation in feedback networks designed for gains of 5 or greater. A practical design must account for output loading and trace capacitance, which can materially affect high-frequency behavior even when the nominal closed-loop gain is correct. Use short traces, a controlled ground plane, and local supply bypass, then verify the complete channel with the intended source and load. The part should not be selected for a unity-gain protocol path without a stability review.

📡

Waveform Shaping

The AD848SQ is suited to high-speed waveform-shaping circuits that need controlled amplification at gains of 5 or greater. In pulse, edge, or timing-signal conditioning, the amplifier's high-speed behavior helps preserve transition shape better than a slow general-purpose op amp, while the internally compensated topology reduces the burden of external compensation in the intended gain range. Component tolerances and parasitic loading can affect pulse symmetry, so simulation and oscilloscope verification should use realistic source and load models. The output-drive and slew-rate limits must be checked against the required edge rate. A unity-gain implementation would fall outside the documented stability region and should use an amplifier with unity-gain stability instead.

🖥️

Precision Analog Measurement

AD848SQ can be used in the high-gain portion of an analog measurement system when the signal path requires both bandwidth and meaningful closed-loop gain. Its low-power monolithic implementation is useful for compact instrumentation that amplifies sensor outputs before filtering or digitization. Precision-oriented designs should compare the AD848 with the AD840, AD841, and AD842 family members identified in the manufacturer datasheet because those devices are described as offering greater precision and output-current drive. The AD848 should be selected when its measured input offset, bias current, noise, common-mode range, and stability behavior satisfy the system. Gain errors and input-referred errors should be budgeted before deciding that the faster general-purpose device is adequate.

📊

Data Acquisition Front End

AD848SQ fits a data-acquisition front end when analog signals must be amplified by a factor of 5 or greater before sampling. Placing the amplifier before the converter can reduce the required converter full-scale range and help preserve small signal components. The stage should be designed around the converter's input bandwidth and sampling rate, with adequate settling time for the selected gain. Because the AD848 is not unity-gain stable, the signal source and feedback network must maintain the documented minimum gain, including at startup and signal-zero conditions. A unity-gain-stable choice such as the AD847 may be easier to deploy when the gain requirement varies. Use local bypass capacitance and a short, low-impedance analog ground path to minimize acquisition errors.

Buod ng mga Inirekomendang Produkto

AD840 High-precision, high-output-drive amplifier family member Ginagamit sa: Instrumentation Preamplifier, Communications Interface, Precision Analog Measurement, Data Acquisition Front End AD841 High-precision, high-output-drive amplifier family member Ginagamit sa: Instrumentation Preamplifier, Precision Analog Measurement AD842 High-precision, high-output-drive amplifier family member Ginagamit sa: Instrumentation Preamplifier, Precision Analog Measurement AD847 Unity-gain-stable high-speed amplifier for lower-gain video stages Ginagamit sa: Video Signal Conditioning, Communications Interface, Waveform Shaping, Data Acquisition Front End AD848SQ Analog Devices Ginagamit sa: Video Signal Conditioning AD849SQ Fully decompensated family member for gain greater than 24 Ginagamit sa: Waveform Shaping
What is the AD848SQ?
The AD848SQ is a high-speed, low-power monolithic operational amplifier from Analog Devices in an 8-pin CERDIP package. According to the Analog Devices AD848 product page, it is internally compensated for stable closed-loop gains of 5 or greater. It is a general-purpose analog signal-conditioning device intended for applications where meaningful closed-loop gain and high speed are both required.
What is the minimum stable gain of the AD848SQ?
The AD848SQ is stable at closed-loop gains of 5 or greater. The Analog Devices AD848/AD849 datasheet identifies the AD848 as internally compensated, whereas the AD849 is fully decompensated and stable only above gain 24. When using the AD848SQ, verify that the feedback network, source impedance, load, and signal amplitude preserve the required minimum gain.
Where can I download the AD848SQ datasheet PDF?
The official AD848SQ datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD848.pdf. The manufacturer datasheet is the appropriate document for the AD848 and AD849 family because it contains the compensation details, electrical characteristics, package information, and pin descriptions needed for circuit design.
What is the AD848SQ pinout?
The AD848SQ uses an 8-pin CERDIP package, but an authoritative pin-by-pin assignment should be taken from the Analog Devices AD848/AD849 datasheet. Use the manufacturer's pin-description table when routing the PCB because the package drawing identifies orientation and numbering for the ceramic DIP body. Do not infer the signal-pin assignments from a generic 8-pin operational-amplifier footprint.
What package does AD848SQ use?
The AD848SQ is offered in an 8-pin CERDIP package. The Analog Devices product information describes AD848SQ as a one-circuit operational amplifier in 8-CERDIP, while the manufacturer datasheet provides the definitive package drawings and ordering information. Confirm the package suffix and pin orientation before beginning a PCB layout.
AD848SQ vs AD849SQ: which one should I choose?
Choose the AD848SQ when the closed-loop gain is 5 or greater, and choose the AD849SQ only when the design operates above gain 24. According to the Analog Devices AD848/AD849 datasheet, the AD848 is internally compensated for gains of at least 5, while the AD849 is fully decompensated and stable at gains greater than 24. Their compensation requirements are therefore not interchangeable.
Can the AD849 replace the AD848SQ?
The AD849 is not a direct drop-in replacement for the AD848SQ without a stability review. According to the Analog Devices AD848/AD849 datasheet, the AD848 is stable at gains of 5 or greater, while the fully decompensated AD849 requires gains greater than 24. If the existing circuit operates between those limits, substituting the AD849 can compromise loop stability.
When should I choose the AD848SQ instead of the AD847?
Choose the AD848SQ when the signal path naturally requires closed-loop gain of 5 or greater. According to the Analog Devices AD848/AD849 datasheet, the AD847 is unity-gain stable and has a 50 MHz gain-bandwidth product, making it a better fit for unity-gain or lower-gain stages. The AD848SQ is preferable when its internally compensated gain range matches the intended feedback network.
Is the AD848SQ suitable for video signal conditioning?
The AD848SQ can be suitable for high-speed video-signal conditioning when the closed-loop gain is at least 5 and the circuit operates within the device's electrical limits. Its high-speed, low-power monolithic design is appropriate for waveform and gain stages, but bandwidth, slew rate, output swing, and load drive must be checked against the specific video standard before release.
How should I decouple the AD848SQ power supply?
Place suitable bypass capacitance close to each power-supply pin and keep the return path short and low impedance. The exact supply voltage, current, and recommended capacitor values must be taken from the Analog Devices AD848/AD849 datasheet. Good local decoupling helps the high-speed amplifier maintain stable operation and prevents supply impedance from degrading transient response.
What are the key specifications of AD848SQ that engineers should know?
The principal AD848SQ characteristics are its high-speed, low-power monolithic architecture, one-circuit configuration, internal compensation, minimum stable closed-loop gain of 5, and 8-pin CERDIP package. According to the Analog Devices product page and AD848/AD849 datasheet, these attributes define its role as a general-purpose high-speed amplifier for nonzero-gain analog signal paths.
Where can I buy the AD848SQ online?
Use the Request a Quote form on this page to request the AD848SQ and confirm availability, current lead time, and any minimum order quantity. Because legacy ceramic-DIP inventory can vary by package suffix and production status, request the exact AD848SQ ordering code rather than substituting AD848AQ, AD848SQ/883B, or another family member without a compatibility review.
What is the price of the AD848SQ?
Use the Request a Quote form on this page for the current AD848SQ unit price and quantity availability. The structured pricing area should be used for any live commercial figure, while requests can also confirm minimum order quantity, production traceability, and lead time for this legacy ceramic-DIP configuration.
Is the AD848SQ in stock and what is its lead time?
Current AD848SQ inventory and lead time should be confirmed through the Request a Quote form on this page. The component's legacy package grade can constrain availability, so include the required quantity and target delivery date in the request. Do not substitute a different suffix without confirming electrical grade, environmental requirements, and package compatibility.
What is the best cross-brand equivalent for the AD848SQ?
No cross-brand equivalent is established by the available manufacturer and distributor information for the exact AD848SQ configuration. A valid replacement would need to match the 8-pin CERDIP pinout, minimum closed-loop gain of 5, supply range, bandwidth, slew rate, input and output limits, and noise or offset requirements. Use the Request a Quote form when a qualified cross-brand source is required.
How should I evaluate a drop-in replacement for the AD848SQ?
Evaluate a proposed AD848SQ replacement against its minimum stable gain, package pins, supply voltage, input common-mode range, output swing, gain-bandwidth product, slew rate, output drive, input bias current, offset voltage, noise, and environmental grade. According to the Analog Devices family documentation, compensation stability is a critical distinction: the AD848 requires gain 5 or greater, while the AD849 requires gain greater than 24.

Impormasyon ng Talumpati sa Engineering for AD848SQ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the AD848SQ when a high-speed, low-power monolithic operational amplifier is needed and the feedback network will operate at a closed-loop gain of 5 or greater. Its internal compensation is well suited to conventional nonzero-gain signal-conditioning stages, but it is not appropriate for unity-gain service without additional compensation. Select AD847SQ when unity-gain stability is essential or when the AD848's minimum gain conflicts with the signal chain. Use AD849SQ or AD849AQ only in circuits deliberately configured for gains greater than 24; their full decompensation makes them unsuitable as automatic substitutes in lower-gain loops. AD848AQ and AD848SQ/883B may fit the same ceramic-DIP family, but their suffix-specific environmental requirements must be checked. For new precision-heavy designs, also evaluate the AD840, AD841, and AD842, which the manufacturer describes as offering greater precision and output-current drive. Every replacement must be checked for pinout, package, supply, bandwidth, stability, output swing, and environmental grade.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto AD848SQ/883B AD848AQ AD849SQ AD849AQ AD847SQ
Package 8-pin CERDIP 8-pin CERDIP 8-pin CERDIP 8-pin CERDIP 8-pin CERDIP 8-pin CERDIP
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Product Type High-speed, low-power monolithic operational amplifier High-speed, low-power monolithic operational amplifier High-speed, low-power monolithic operational amplifier High-speed, low-power monolithic operational amplifier High-speed, low-power monolithic operational amplifier High-speed, low-power monolithic operational amplifier
Minimum Stable Closed-Loop Gain 5 or greater 5 or greater 5 or greater Greater than 24 Greater than 24 Unity-gain stable
Circuit Count 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit

Pangunahing mga Pagkakaiba

  • Internal compensation supports a defined nonzero-gain operating region (kumpara saAD849SQ)
  • Supports unity-gain signal paths that are outside the AD848 stability range (kumpara saAD847SQ)
  • Exact SQ ceramic-DIP configuration and ordering identity (kumpara saAD848AQ)

Talaan ng Disenyo

Do not design the AD848SQ for unity-gain operation. The manufacturer identifies it as internally compensated and stable for closed-loop gains of 5 or greater. Check the gain requirement at every operating condition, including signal-zero, startup, and tolerance cases. The fully decompensated AD849 requires gain greater than 24, so substituting it into a gain-5 stage without compensation can make the feedback loop unstable.

Keep the feedback loop compact and route the inverting input directly to the relevant feedback component. Use a continuous ground reference with minimal return-path impedance, avoid routing inputs beside high-current or fast-switching nodes, and place supply bypass components close to the amplifier pins. In a ceramic-DIP implementation, watch for socket and lead inductance because these parasitics become more consequential at high operating frequencies.

Evaluate the complete source impedance, feedback impedance, load capacitance, and intended output amplitude before finalizing the gain stage. Capacitive loading can reduce bandwidth or induce peaking, while large loads can demand more output-current capability than the amplifier can provide. Probe the actual circuit across its operating range and verify settling or pulse fidelity rather than relying only on nominal bandwidth figures.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The AD848SQ product information identifies an 8-pin CERDIP package but does not provide extractable RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations.

Data napatotohanan sa: 2026-11-14 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

AD848SQ datasheet AD848SQ specifications AD848SQ pinout AD848SQ datasheet pdf AD848SQ 8-CERDIP AD848SQ equivalent AD848SQ replacement AD848SQ cross reference AD848SQ vs AD849SQ AD848SQ application circuit Analog Devices AD848SQ AD848SQ price

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices AD848SQ AD848 AD849 AD847 AD840 AD841 AD842 high-speed operational amplifier monolithic operational amplifier low-dropout regulator linear regulator voltage regulator power management IC semiconductor closed-loop gain internal compensation fully decompensated amplifier unity-gain stable amplifier gain-bandwidth product 8-pin CERDIP ceramic DIP through-hole package instrumentation preamplifier video signal conditioning data acquisition front end RoHS REACH AEC-Q100
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ