Analog Devices

AD9066ARS - Dual 6-Bit 60 MSPS ADC | Analog Devices | RF

MPN: AD9066ARS ✓ Nakahanda
+5 V Vdss 28-lead SSOP Package
MOQ: 1 |

AD9066ARS Ulas

The Analog Devices AD9066ARS is a dual 6-bit, 60 MSPS monolithic flash analog-to-digital converter optimized for low-cost in-phase and quadrature demodulation. It combines two matched ADCs on one CMOS-compatible chip, operates from a single +5 V supply, and is packaged in a 28-lead SSOP. The converter combines a 6-bit resolution with an aggregate sampling rate of 60 MSPS, while its 400 mW low-power dissipation supports cost-sensitive RF receiver designs.

A flash ADC is a parallel-input data converter that converts an analog voltage into a digital code using multiple comparators and internal switching networks. The dual architecture provides simultaneous conversion of I and Q channels, while the on-chip voltage reference reduces external component requirements. The AD9066 belongs to the broader ADC hierarchy of data converters, interface ICs, and semiconductor signal-processing devices.

Key features include two matched converters, 6-bit resolution, a 60 MSPS sampling rate, CMOS-compatible digital I/O, and self-biased inputs for AC-coupled signals. The single +5 V supply architecture simplifies system power planning, while the integrated reference establishes a common conversion reference for both channels. Low 400 mW dissipation is particularly useful in receiver designs where converter power contributes directly to thermal and system-level budgets.

Internally, the AD9066 is a flash-type ADC designed for high-speed sampling and parallel data output. Its matched dual channels suit quadrature demodulation, where a complex RF signal is separated into in-phase and quadrature components before digitization. The self-biased AC-coupled input arrangement simplifies interface design when the receiver front end operates around a nonzero midpoint voltage. The manufacturer identifies direct broadcast satellite receivers using broadband QPSK modulation as a principal application.

Typical uses include QPSK satellite receivers, digital broadcast demodulators, low-cost I/Q receivers, RF measurement front ends, and communication systems that need simultaneous dual-channel sampling. The 28-lead SSOP package also supports conventional surface-mount assembly, although its relatively long leads require adequate pitch and lead-clearance planning on dense boards.

The primary design consideration is digital-interface timing. Because this is a parallel 6-bit converter operating at 60 MSPS, PCB routing, output clock distribution, grounding, and input settling must be evaluated together. Keep high-speed digital traces short, maintain a continuous ground reference, and use controlled impedance where the implementation requires it. Use the manufacturer pin description and application guidance to assign signals and validate the input network.

This page combines the manufacturer product information with verified package, feature, pricing, and cross-reference details. It also adds application-specific guidance, pin and design cautions, and an explicit comparison of same-family alternatives so engineers can assess replacement decisions without confusing package variants with functionally distinct converters.

Mga alternatibo na pwedeng ilagay na AD9066ARS — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok AD9066ARS (parehas na form factor at footprint) — pagkakaiba sa Package, Sampling Rate, Resolution, Converter Type, Number of Channels.

Analog Devices
Package: 28-lead SOIC
Sampling Rate: 60 MSPS per channel
Resolution: 6 bits per channel
Ikabit sa AD9066ARS →
Analog Devices
Package: 28-pin SOIC
Sampling Rate: 60 MSPS per converter
Ikabit sa AD9066ARS →

AD9066AR

✅ Drop-In
Analog Devices
📦 28-lead SSOP
Dual 6-bit monolithic flash ADC · 2 channels · 6 bits per channel · 60 MSPS per channel · +5 V · 400 mW · CMOS-compatible parallel I/O · On-chip voltage reference

Magkontak para sa presyo

Tingnan ang Datasheet →

AD9066ARZ

✅ Drop-In
📦 28-lead SSOP
Same AD9066 dual 6-bit, 60 MSPS family and 28-lead SSOP class; lead finish and ordering-code details differ while core conversion specifications match

📋 Alternatibo na Reference (hindi sa katalogo)

AD9066JR

✅ Drop-In
Analog Devices
📦 28-lead SSOP
Dual 6-bit monolithic analog-to-digital converter · 2 channels · 6 bits · 60 MSPS per converter · Flash ADC · +5 V · CMOS-compatible · CMOS encode input with TTL-compatible 1.4 V threshold

Magkontak para sa presyo

Tingnan ang Datasheet →

AD9066ARS Mga Pinakamataas na Rating at Electrical Characteristics

Converter Type Dual monolithic flash ADC
Number of Channels 2 matched ADCs
Pangangasiwaan 6 bits
Rate ng Pagkupita 60 MSPS
Output Interface 6-bit parallel
Volte ng Pagbibigay +5 V
Power Dissipation 400 mW
Input Architecture Self-biased for AC-coupled inputs
Reference On-chip voltage reference
Digital I/O Compatibility CMOS-compatible
Packhaging 28-lead SSOP
Primary Application Low-cost I/Q demodulators
Modulation Application Broadband QPSK

Gabay sa Pin Configuration ng AD9066ARS 28-lead ssop

Pin configuration para sa AD9066ARS (28-lead ssop package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng 28-lead ssop package para sa AD9066ARS

Wala ng detalyadong pinout data na magagamit para sa AD9066ARS.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

AD9066ARS ay nararapat para sa 6 aplikasyons: QPSK Satellite Receiver, In-Phase and Quadrature Demodulation, Digital Broadcast Receiver, Low-Cost RF Measurement Front End, Communication Receiver Front End, Low-Cost Digital Demodulator.

📡

QPSK Satellite Receiver

The AD9066ARS fits a low-cost QPSK demodulator because it digitizes the in-phase and quadrature paths simultaneously at 60 MSPS through two matched 6-bit channels. Each flash converter accepts an analog signal and returns a six-bit parallel code for the receiver's digital demodulator. The single +5 V supply and 400 mW dissipation simplify power budgeting, while the matched channels support consistent processing of the two orthogonal components. The 28-lead SSOP footprint requires adequate lead spacing and careful clock routing, but it is practical for receiver boards with conventional surface-mount assembly.

🌐

In-Phase and Quadrature Demodulation

The AD9066ARS is designed for receiver front ends that separate a complex RF waveform into in-phase and quadrature signals. Its two matched ADCs sample those paths at the same 60 MSPS rate, reducing the need for separately timed converters, while the 6-bit parallel outputs feed digital filtering and symbol recovery. The integrated voltage reference and self-biased AC-coupled inputs simplify the analog interface. The design trade-off is quantization resolution: 6 bits favors a low-cost demodulator, but the recovered signal depends on sufficient front-end gain and compensation for quantization error.

📺

Digital Broadcast Receiver

A digital broadcast receiver can use the AD9066ARS to convert the recovered analog I and Q channels into parallel digital data. The dual 6-bit architecture is aligned with low-cost broadcast demodulation, where the downstream FPGA or DSP performs filtering, carrier recovery, and symbol decoding. A 60 MSPS sampling capability supports the stated broadcast receiver role, and the 400 mW dissipation helps control power in continuously operating equipment. Designers should keep the six-bit output buses short, route the clock cleanly, and provide a stable ground reference to avoid degrading digital code integrity.

📡

Low-Cost RF Measurement Front End

The AD9066ARS can serve as the sampling element in a compact RF measurement front end when six-bit resolution is adequate for envelope or phase observation. The matched dual inputs support measurement of two related signals at 60 MSPS, and the parallel outputs provide direct access to capture logic. The integrated reference and self-biased AC-coupled inputs reduce external support circuitry, while the +5 V single-supply operation aligns with many mixed-signal systems. This use requires careful analog bandwidth control and input settling because the converter is intended for high-speed, short-signal-path implementations rather than slow precision measurement.

🔧

Communication Receiver Front End

The AD9066ARS is applicable when a communication receiver must capture two related baseband or demodulated channels with matched converters. Its dual 6-bit, 60 MSPS design gives digital logic simultaneous samples for modulation analysis or symbol processing. The low 400 mW dissipation is valuable in compact equipment, and CMOS-compatible outputs simplify connection to contemporary capture logic. The converter should be placed close to the RF or mixer output drivers so that the AC-coupled analog inputs settle consistently, with separate return paths and bypass capacitors placed according to the manufacturer's layout guidance.

⚙️

Low-Cost Digital Demodulator

The AD9066ARS supports compact digital demodulators that require rapid I/Q conversion but not high-resolution instrumentation. Two matched 6-bit channels at 60 MSPS provide parallel codes for digital filters, phase correction, and symbol-rate processing. Its single +5 V operating supply and on-chip reference reduce system complexity, while the 400 mW dissipation leaves room for the processor and memory in the same enclosure. In a production design, validate code width, clock-to-output timing, and output ordering against the manufacturer pin descriptions, especially when converting the device from a prototype layout to a new board revision.

What are the key specifications of AD9066ARS that engineers should know?
The AD9066ARS is a dual 6-bit, 60 MSPS monolithic flash ADC with parallel output, a single +5 V supply, and a 28-lead SSOP package. According to the Analog Devices manufacturer datasheet, it integrates two matched ADCs, an on-chip voltage reference, CMOS-compatible I/O, and self-biased AC-coupled inputs. Its stated low-power dissipation is 400 mW, making it oriented toward cost-sensitive quadrature demodulators rather than high-resolution instrumentation.
What is the operating voltage of AD9066ARS?
The AD9066ARS operates from a single +5 V analog supply. The Analog Devices manufacturer datasheet identifies a low-power design with 400 mW dissipation and CMOS-compatible digital interfaces. Because the device is centered on a single-supply architecture, the receiver signal chain must keep the analog input within the converter's specified common-mode range while the digital interface uses the supply rails appropriate for its CMOS-compatible outputs.
How fast does the AD9066ARS sample and what resolution does it provide?
The AD9066ARS provides 60 MSPS sampling through two matched 6-bit flash conversion channels. According to the Analog Devices manufacturer datasheet, the dual converters operate on the same chip and use a parallel digital interface. This combination favors simultaneous I and Q signal capture, where six-bit resolution is sufficient for inexpensive quadrature demodulation and downstream digital correction.
What is an AD9066ARS used for?
The AD9066ARS is used primarily for low-cost in-phase and quadrature demodulation in direct broadcast satellite receivers. The Analog Devices manufacturer product page identifies broadband QPSK receivers as its principal application. Its two matched 6-bit, 60 MSPS channels sample the I and Q components separately, allowing downstream logic to reconstruct the complex envelope and phase information.
Where can I download the AD9066ARS datasheet PDF?
The official AD9066ARS documentation is available through the Analog Devices product page, which provides access to the manufacturer datasheet and technical documentation. The manufacturer product page at analog.com/en/products/ad9066.html is the authoritative starting point for electrical characteristics, pin assignments, and application information. Use the pin-description table and package drawing there before assigning PCB tracks or checking input and output interfaces.
Where can I find the AD9066ARS pinout and package drawing?
The AD9066ARS pinout and package drawing are contained in the Analog Devices manufacturer datasheet and product documentation. The part is specified in a 28-lead SSOP package, so its footprint must accept the corresponding lead spacing and body dimensions. Use the manufacturer pin-description table when connecting the six parallel output bits, analog inputs, clock, power, ground, and reference-related signals.
What is the power dissipation of AD9066ARS?
The AD9066ARS has a stated low-power dissipation of 400 mW. According to the Analog Devices manufacturer datasheet, it combines this low-power operating point with dual 60 MSPS conversion and a single +5 V supply. In an RF receiver, this value should be evaluated together with converter accuracy, demodulator clocking, and the power consumed by surrounding analog and digital circuitry.
Does the AD9066ARS include a voltage reference?
Yes, the AD9066ARS includes an on-chip voltage reference. The Analog Devices manufacturer datasheet lists this feature alongside the two matched ADCs, single +5 V supply, CMOS-compatible I/O, and self-biased AC-coupled inputs. The integrated reference simplifies the external support network, although final decoupling, grounding, and input-bias arrangements should still follow the manufacturer's application guidance.
Where can I buy AD9066ARS online?
Use the Request a Quote form on this page to request AD9066ARS availability, current lead time, minimum order quantity, and a formal quotation. The request identifies the exact AD9066ARS MPN and helps the supply team confirm the correct 28-lead SSOP configuration. Lead time and stock should be reconfirmed for each order because availability for this catalog part can change with market conditions.
What is the price of AD9066ARS?
Current AD9066ARS pricing is obtained through the Request a Quote form on this page. The form supports confirmation of the exact MPN, package variant, delivery quantity, and current commercial terms. Because pricing and inventory are time-sensitive, use the same form for a quotation rather than relying on a historical or starting-price figure.
What is the lead time and stock status for AD9066ARS?
Current AD9066ARS stock and lead time should be requested through the Request a Quote form on this page. Include the required quantity and delivery location in the request so the supply team can confirm an accurate commitment. The part is identified as a dual 6-bit, 60 MSPS ADC in a 28-lead SSOP, so no alternate package suffix should be substituted without engineering review.
AD9066ARS vs AD9066AR - which is better for an I/Q receiver?
The AD9066ARS is the appropriate choice when the exact 28-lead SSOP ordering code must be retained; the AD9066AR is the closest listed same-family comparison candidate. Both belong to the AD9066 family and are compared as SSOP-oriented options, but order-code, temperature, lifecycle, and packaging differences must be checked before substitution. The Analog Devices manufacturer documentation remains the deciding authority for the specific suffix.
When should I choose AD9066ARS instead of AD9066AR?
Choose AD9066ARS when the design has been released specifically for that exact ordering code and its 28-lead SSOP footprint, supply plan, and qualification records already reference it. Move to AD9066AR only after confirming pin compatibility, electrical ratings, lifecycle status, and package drawing. The safest selection rule is to treat the suffix as part of the component specification rather than assuming identical ordering codes are interchangeable.
What can replace AD9066ARS as a drop-in replacement?
The closest documented candidates are AD9066AR, AD9066ARZ, and AD9066JR from the AD9066 family, subject to final package, pin, electrical, and lifecycle verification. A true drop-in replacement must retain the 28-lead SSOP footprint and preserve the dual 6-bit, 60 MSPS interface. Tape-and-reel order codes are packaging variants rather than additional engineering alternatives and should not be counted as distinct replacements.
Is there a cross-brand drop-in equivalent for AD9066ARS?
No cross-brand drop-in equivalent could be confirmed from the available manufacturer and distributor documentation for the AD9066ARS. The documented alternatives are same-manufacturer AD9066 family members. The Analog Devices manufacturer datasheet remains necessary to validate analog input range, timing, reference behavior, supply requirements, and exact pin assignments before considering any functional substitute that does not share the verified footprint.
Is AD9066ARS the same as AD9066JR?
AD9066ARS and AD9066JR are closely related AD9066 dual 6-bit, 60 MSPS converter entries, but they are not automatically identical orderable devices. The available comparison information identifies AD9066JR as obsolete and distinguishes the packaging details. Check lifecycle status, temperature grade, lead finish, package dimensions, and all 28 pin assignments before treating AD9066JR as a production drop-in replacement.

Impormasyon ng Talumpati sa Engineering for AD9066ARS — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose AD9066ARS for a low-cost receiver that requires simultaneous 6-bit I/Q digitization at 60 MSPS from a single +5 V supply. It is particularly appropriate for QPSK demodulators and digital broadcast receivers where the on-chip reference, self-biased AC-coupled inputs, parallel output, and 400 mW dissipation align with the system architecture. AD9066AR is a reasonable same-family candidate when its order code, lifecycle, and qualification records match the production plan. AD9066ARZ may suit designs requiring that specific lead-finish ordering code, but pin and lifecycle details must still be confirmed. AD9066JR is unsuitable as an ongoing new-design choice because it is listed as obsolete. No cross-brand drop-in alternative is established here, so changing manufacturers requires a new footprint, interface, timing, and signal-integrity review rather than a simple last-minute substitution.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto AD9066AR AD9066ARZ AD9066JR
Package 28-lead SSOP 28-lead SSOP 28-lead SSOP 28-lead SSOP
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Converter Type Dual monolithic flash ADC Dual flash ADC Dual flash ADC Dual flash ADC
Resolution 6 bits 6 bits 6 bits 6 bits
Sampling Rate 60 MSPS 60 MSPS 60 MSPS 60 MSPS
Number of Channels 2 matched ADCs 2 2 2
Output Interface 6-bit parallel 6-bit parallel 6-bit parallel 6-bit parallel

Pangunahing mga Pagkakaiba

  • Purpose-built dual-channel I/Q conversion (kumpara saAD9066JR)
  • Exact ordering-code continuity (kumpara saAD9066AR)
  • Low-power integrated receiver conversion (kumpara saAD9066ARZ)

Talaan ng Disenyo

Place the AD9066ARS close to the output of the I/Q driver circuitry and keep the analog input paths short and symmetric. Route each output bus to the associated capture logic without unnecessary stubs. Maintain a continuous ground plane beneath the converter and logic, and place local bypass capacitors at the power pins according to the manufacturer pin-description and application guidance.

Treat the clock as a high-speed signal even though the data resolution is only 6 bits. Use short clock routes, avoid crossing noisy analog or switching-supply regions, and provide a low-inductance return path. Confirm that all six output bits meet the required setup and hold timing at the receiving device under the intended 60 MSPS operating condition.

Do not treat AD9066ARS, AD9066AR, AD9066ARZ, and AD9066JR as automatically equivalent ordering codes. Verify lead finish, temperature grade, lifecycle status, package dimensions, and the complete 28-pin assignment before substitution. A tape-and-reel suffix changes delivery packaging rather than adding a distinct converter design, so it should not be used to claim a different drop-in alternative.

Budget the converter's stated 400 mW dissipation within the complete receiver thermal design. Use the +5 V supply specification when estimating current contribution, and place supply decoupling close to the device. Check adjacent clocking, memory, and logic because their switching activity can dominate board-level heat and supply-noise behavior even when the ADC itself has a modest power rating.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The available manufacturer and distributor information does not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements. AEC-Q100 is not applicable because AD9066ARS is not described as an automotive-qualified device.

Data napatotohanan sa: 2026-11-15 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

AD9066ARS datasheet AD9066ARS datasheet pdf AD9066ARS pinout AD9066ARS specifications AD9066ARS 60 MSPS AD9066ARS 6-bit ADC AD9066ARS 28-pin SSOP AD9066ARS QPSK receiver AD9066ARS I/Q demodulator AD9066ARS equivalent AD9066ARS replacement AD9066ARS vs AD9066AR Analog Devices AD9066ARS AD9066ARS price AD9066ARS stock

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices AD9066ARS AD9066AR AD9066ARZ AD9066JR Dual flash ADC Analog-to-digital converter ADC Flash converter In-phase and quadrature demodulator I/Q receiver QPSK Digital broadcast satellite 6-bit resolution 60 MSPS sampling rate Parallel output CMOS-compatible I/O On-chip voltage reference Self-biased AC-coupled input Single +5 V supply 400 mW power dissipation 28-lead SSOP Surface mount Digital demodulator RF receiver
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ