Analog Devices

AD9632AN - 320 MHz Low-Distortion Op Amp | Analog Devices

MPN: AD9632AN ✓ Nakahanda
8-pin PDIP (N) Package
MOQ: 1 |

AD9632AN Ulas

The Analog Devices AD9632AN is an ultralow-distortion, high-speed voltage-feedback operational amplifier with 320 MHz small-signal bandwidth and 250 MHz large-signal bandwidth. It is stable at a closed-loop gain of 2 or greater and is packaged in an 8-pin PDIP. The AD9632 family is positioned for high-speed signal conditioning, data conversion, instrumentation, and communications circuits where wide bandwidth and low distortion are important.

A voltage-feedback operational amplifier is a semiconductor amplifier that uses feedback around a high-gain differential input stage to control closed-loop gain. This amplifier class belongs to the broader hierarchy of operational amplifiers, analog signal-conditioning ICs, and semiconductor devices. Unlike a comparator, an operational amplifier is designed to amplify continuous analog signals, and unlike a switching regulator, its role is signal conditioning rather than power conversion.

The AD9632AN provides wide bandwidth for high-speed analog signal paths. Its 320 MHz small-signal bandwidth supports operation well above video bandwidth, while its 250 MHz large-signal bandwidth indicates strong behavior with larger output signals. The family is specifically described as stable at gain of 2 or greater, so gain-of-1 layouts require careful review before implementation. Its ultralow-distortion positioning makes it relevant to analog front ends, analog-to-digital converter drivers, and test equipment.

The AD9632 and AD9631 are described as improved-performance alternatives to the AD9621 and AD9622. The AD9631 is unity-gain stable, whereas the AD9632 requires a gain of 2 or greater for stability. This distinction is central when selecting a replacement: stability behavior and gain architecture must match the signal chain rather than only the package dimensions.

Typical applications include high-speed ADC input conditioning, precision instrumentation, broadband communications, active filtering, and pulse-processing systems. In these systems, the amplifier can sit between a sensor or signal source and a downstream converter, where low distortion and high bandwidth help preserve signal amplitude and linearity. Adequate output-current capability, input common-mode range, supply voltage, noise, and stability margins must also be confirmed against the manufacturer datasheet for the selected circuit.

Design consideration: keep the feedback loop short and place compensation, termination, and decoupling components according to the recommended application circuits. Use resistive feedback values that preserve the required gain of 2 or greater, and account for parasitic capacitance when high-speed routing could alter stability. A PCB with long traces, poorly placed bypass capacitors, or an unintended capacitive load can reduce practical bandwidth even when the intrinsic bandwidth specification remains unchanged.

This page consolidates the exact AD9632AN package, stability, bandwidth, and family-positioning information with practical selection guidance, application context, and an explicit review of replacement constraints. It also distinguishes the AD9632AN from unity-gain-stable or different-package options so engineers can assess compatibility before committing a new PCB revision.

Mga alternatibo na pwedeng ilagay na AD9632AN — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok AD9632AN (parehas na form factor at footprint) — pagkakaiba sa Package.

Analog Devices
Package: 8-pin PDIP
Ikabit sa AD9632AN →

AD9631AN

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
Analog Devices
📦 8-pin Plastic Mini-DIP (N)
Voltage-feedback operational amplifier · 320 MHz · 250 MHz · +1 · 65 degrees · ±6 V · 12 V · 8-pin PDIP

Magkontak para sa presyo

Tingnan ang Datasheet →

AD9632AN Mga Pinakamataas na Rating at Electrical Characteristics

Product Type Voltage-feedback operational amplifier
Amplifier Architecture Voltage feedback
Small-Signal Bandwidth 320 MHz
Large-Signal Bandwidth 250 MHz
Minimum Stable Gain 2
Gain Stability Stable at gains of 2 or greater
Distortion Characteristic Ultralow distortion
Circuit Count 1 circuit
Packhaging 8-pin PDIP (N)
Bilang ng Pin 8 pins
Uri ng Pagpapasok Through-hole
Related Unity-Gain-Stable Family Member AD9631
Predecessor Family AD9621 and AD9622

Gabay sa Pin Configuration ng AD9632AN 8-pin pdip (n)

Pin configuration para sa AD9632AN (8-pin pdip (n) package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng 8-pin pdip (n) package para sa AD9632AN

Wala ng detalyadong pinout data na magagamit para sa AD9632AN.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

AD9632AN ay nararapat para sa 6 aplikasyons: High-Speed ADC Input Conditioning, Broadband Instrumentation, Communications Signal Conditioning, Active Filtering, Pulse and Edge Processing, Data Acquisition Front Ends.

🔧

High-Speed ADC Input Conditioning

The AD9632AN fits ADC front ends that require wide signal bandwidth and low distortion, particularly when the closed-loop gain is 2 or greater. Place it close to the converter input and keep the feedback network compact so that parasitic capacitance does not alter compensation or settling behavior. Its 320 MHz small-signal bandwidth and 250 MHz large-signal bandwidth provide useful response margin for high-speed conversion systems. Confirm the ADC’s input range, settling requirements, and required driver level against the amplifier datasheet before finalizing the interface.

🖥️

Broadband Instrumentation

The AD9632AN is suitable for instrumentation amplifier stages that process high-frequency sensor or test signals while preserving low distortion. A gain of 2 or greater satisfies its documented stability requirement and can provide useful drive for subsequent filtering or conversion stages. Keep the amplifier close to the surrounding passive network, minimize loop area, and provide local supply bypassing. The device’s 320 MHz small-signal bandwidth supports wide-band measurement paths, while the large-signal bandwidth of 250 MHz remains relevant when output swing is substantial.

🌐

Communications Signal Conditioning

The AD9632AN can amplify intermediate-frequency or other communications signals when a low-distortion, wide-band voltage-feedback stage is needed. Its high bandwidth supports high-frequency channels, but the design must account for output swing, output-current demand, and the exact gain used in the signal chain. Local decoupling and short feedback paths are essential at these frequencies. The amplifier should be used in gain of 2 or greater unless a separate analysis establishes acceptable operation at unity gain.

📡

Active Filtering

The AD9632AN can implement high-order active-filter stages where the required closed-loop gain is 2 or greater and low distortion is important. Its 320 MHz small-signal bandwidth provides high-frequency operating potential, while the 250 MHz large-signal specification helps evaluate behavior at larger signal amplitudes. Component tolerances, op-amp gain-bandwidth interaction, and parasitic capacitance should be modeled together. Keep the feedback resistors and compensation capacitor placement consistent with the recommended layout practices for high-speed voltage-feedback amplifiers.

⚡

Pulse and Edge Processing

The AD9632AN can serve as a high-speed amplifier in pulse, transient, and edge-processing circuits where bandwidth limits would distort the signal shape. Its gain stability is acceptable at 2 or greater, and the wide small- and large-signal bandwidth ratings support high-frequency waveforms. Nevertheless, output current and slew rate must be checked against the intended waveform rather than inferred from bandwidth alone. Use short traces, local decoupling, and controlled output loading to preserve edge fidelity.

📺

Data Acquisition Front Ends

The AD9632AN is appropriate for data-acquisition channels that need to amplify a high-frequency analog input before sampling or digitization. The minimum stable gain of 2 provides a clear design rule, while 320 MHz small-signal bandwidth leaves room for wideband front ends. Configure input and feedback impedances to avoid excessive noise gain and verify that the converter’s sampling network does not overload the output. The 8-pin PDIP package also supports straightforward through-hole prototyping and inspection.

What are the key specifications of AD9632AN that engineers should know?
The AD9632AN is an 8-pin PDIP voltage-feedback operational amplifier with 320 MHz small-signal bandwidth, 250 MHz large-signal bandwidth, and stability at closed-loop gains of 2 or greater. It is intended for ultralow-distortion, high-speed signal-conditioning applications. According to the Analog Devices AD9632 datasheet and product page, the device belongs to the AD9631/AD9632 family, whose performance is described as improved relative to the AD9621 and AD9622.
What is the AD9632AN used for?
The AD9632AN is used for high-speed analog signal amplification and conditioning, including ADC input paths, instrumentation, communications, active filtering, and test systems. Its 320 MHz small-signal bandwidth and 250 MHz large-signal bandwidth make it appropriate when signal bandwidth is the primary requirement. The Analog Devices AD9632 datasheet identifies it as an ultralow-distortion voltage-feedback amplifier designed for broad-bandwidth applications.
What is the minimum stable gain of the AD9632AN?
The AD9632AN is stable at a closed-loop gain of 2 or greater. Gain-of-1 operation is therefore not an automatically valid replacement configuration for this device. According to the Analog Devices AD9632 family documentation, the related AD9631 is unity-gain stable, making the AD9631 the more appropriate member when a unity-gain buffer is required. This stability distinction must be checked before changing an amplifier in an existing board.
What is the bandwidth of AD9632AN?
The AD9632AN has 320 MHz small-signal bandwidth and 250 MHz large-signal bandwidth. The two figures describe different test conditions: small-signal bandwidth characterizes response with low-amplitude signals, while large-signal bandwidth accounts for greater output-signal swing. According to the Analog Devices AD9632 datasheet, both ratings support the family’s high-speed, wide-bandwidth positioning.
Is AD9632AN suitable for high-speed ADC signal conditioning?
The AD9632AN is suitable for high-speed ADC signal conditioning when the source impedance, settling requirements, and target gain are compatible with the amplifier. Its 320 MHz small-signal bandwidth provides ample response for high-frequency channels, while the minimum stable gain of 2 must be respected. The Analog Devices datasheet identifies the amplifier for ultralow-distortion, wide-bandwidth applications.
What is the difference between AD9632AN and AD9631?
The principal documented difference is gain stability: the AD9632AN is stable at gains of 2 or greater, while the AD9631 is unity-gain stable. Both belong to the high-speed AD9631/AD9632 family and are described as improved-performance alternatives to the AD9621 and AD9622. According to Analog Devices documentation, select AD9631 when unity-gain operation is essential and AD9632 when a closed-loop gain of at least 2 is appropriate.
AD9632AN vs AD9631 - which is better for a unity-gain buffer?
The AD9631 is the better choice for a unity-gain buffer because it is explicitly unity-gain stable, whereas the AD9632AN is documented as stable at gains of 2 or greater. According to the Analog Devices AD9632 family datasheet, that stability requirement is the defining operational distinction. A circuit that needs direct unity-gain operation should not use the AD9632AN without additional analysis or a different architecture.
What is the best drop-in replacement for AD9632AN?
No drop-in replacement can be confirmed from the available manufacturer and cross-reference information. A valid replacement must match the 8-pin PDIP footprint, remain stable at gain 2 or greater, and satisfy the supply, common-mode, output-swing, bandwidth, and distortion requirements of the original circuit. The Analog Devices page lists related family variants, but the available cross-reference results do not establish five or more pin-compatible substitutes, so any proposed replacement must be verified against its own datasheet.
Can an AD9632AN be replaced by an AD9621 or AD9622?
The Analog Devices documentation describes the AD9631 and AD9632 as improved-performance alternatives to the AD9621 and AD9622, but that relationship does not by itself prove drop-in compatibility for every package and suffix. Package, pinout, supply voltage, gain stability, bandwidth, and output capability must be compared before substitution. The AD9632AN specifically uses an 8-pin PDIP (N) package, so only a part with the same footprint and electrical constraints should replace it.
When should I choose AD9632AN over an alternative amplifier?
Choose the AD9632AN when the design needs an ultralow-distortion, high-speed voltage-feedback amplifier in an 8-pin PDIP package and can operate at a closed-loop gain of 2 or greater. It is particularly relevant to broad-band signal conditioning. According to the Analog Devices product documentation, its 320 MHz small-signal bandwidth and 250 MHz large-signal bandwidth distinguish it from lower-bandwidth general-purpose amplifiers, provided the circuit’s other electrical requirements are met.
Is AD9632AN suitable for gain-of-1 signal conditioning?
The AD9632AN is not documented as unity-gain stable, so it is not the standard choice for a gain-of-1 signal-conditioning stage. The Analog Devices family documentation states that the AD9632 is stable at gains of 2 or greater, while the AD9631 is unity-gain stable. Use the AD9631 for that topology or redesign around a gain of at least 2 after checking bandwidth, output swing, and stability.
Where can I download the AD9632AN datasheet PDF?
The official AD9632AN datasheet can be downloaded through the Analog Devices product page at https://www.analog.com/en/products/ad9632.html. The manufacturer identifies the AD9632 datasheet as Revision D and links the product documentation for the family. Use the package, electrical characteristic, and pin-description sections corresponding to the AD9632AN ordering code before assigning PCB connections or circuit values.
Where can I find the AD9632AN pinout?
The AD9632AN pinout is identified in the Analog Devices AD9632 datasheet, where the 8-pin PDIP (N) package is described alongside the AD9631/AD9632 family diagrams. The AD9632AN uses an 8-pin PDIP package, but individual pin numbers and functions should be assigned from the manufacturer’s pin-description table rather than inferred from another package. The product page at https://www.analog.com/en/products/ad9632.html provides access to that documentation.
Where can I buy AD9632AN online and what is the current lead time?
Use the Request a Quote form on this page to request AD9632AN availability, current lead time, and order details from XAIPART. The manufacturer product page identifies the AD9632 family as production, but the available information does not state a current quantity, minimum order quantity, or guaranteed lead time for the exact AD9632AN ordering code. Those commercial details should be confirmed through the quote request rather than inferred from generic family listings.
What is the price of AD9632AN?
Use the Request a Quote form on this page for the current AD9632AN commercial quotation. The Analog Devices product page shows a family-level list-price reference, but it does not provide a qualifying quantity-break table for the exact AD9632AN suffix in the available information. XAIPART therefore publishes the quote workflow as the reliable route for current pricing, stock confirmation, and the exact package and packing requested.
Is AD9632AN in stock?
Stock status for the exact AD9632AN should be confirmed through the Request a Quote form on this page. The manufacturer product page identifies the AD9632 family as production, which indicates continued product availability at the family level, but it does not establish a current stock quantity for the AD9632AN ordering code. Submit the required package, quantity, and destination information with the request to obtain a current supply answer.
How should AD9632AN be laid out for high-speed performance?
Place the AD9632AN feedback components close to the amplifier pins, use short signal and feedback traces, and place supply-bypass capacitors at the device rather than along a remote power branch. According to the Analog Devices application guidance, high-speed layout must also control capacitive loading around the output and input. These practices preserve the practical bandwidth and distortion performance expected from a 320 MHz small-signal amplifier.

Impormasyon ng Talumpati sa Engineering for AD9632AN — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the AD9632AN for high-speed signal-conditioning paths that require an ultralow-distortion voltage-feedback amplifier, 320 MHz small-signal bandwidth, 250 MHz large-signal bandwidth, and a closed-loop gain of 2 or greater. Its 8-pin PDIP format is useful for through-hole prototypes and designs that have not standardized on a surface-mount footprint. Select the related AD9631 instead when unity-gain stability is required; the family documentation identifies that as the key functional distinction. Do not substitute the AD9621 or AD9622 solely because they are related predecessors, since package, pinout, electrical limits, and stability requirements must be verified. No drop-in replacement is listed because the available cross-reference results do not establish compatible 8-pin PDIP parts with quantified electrical equivalence. Final selection should therefore confirm bandwidth, distortion, supply voltage, input common-mode range, output swing, output current, noise, and thermal behavior from the manufacturer datasheet for every proposed alternate.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto
Brand Analog Devices
Package 8-pin PDIP (N)
Small-Signal Bandwidth 320 MHz
Large-Signal Bandwidth 250 MHz
Minimum Stable Gain 2
Amplifier Architecture Voltage feedback
Circuit Count 1 circuit
Pin Count 8 pins
Distortion Characteristic Ultralow distortion
Mounting Type Through-hole

Talaan ng Disenyo

Keep the AD9632AN feedback loop physically short and place its feedback resistors adjacent to the amplifier pins. At the device’s 320 MHz small-signal bandwidth, long PCB traces and probe pads can introduce parasitic capacitance and alter stability. Connect the bypass capacitor directly between each supply pin and the ground reference shown in the manufacturer application circuit. Route the input and output as short, controlled-impedance paths, especially when the source impedance or load capacitance is significant.

Do not assume that a unity-gain configuration is valid. The AD9632 is documented as stable at gains of 2 or greater, while the related AD9631 is unity-gain stable. Replacing the AD9632AN with a unity-gain-stable amplifier can still be wrong if supply voltage, input common-mode range, output swing, or bandwidth differs. Treat gain stability as one constraint in the complete compatibility check rather than as an isolated substitution criterion.

Evaluate output loading and source impedance against the amplifier’s recommended operating conditions before finalizing the board. Capacitive loading can affect closed-loop response, while a high source impedance can increase noise gain and reduce effective bandwidth. Use the Analog Devices AD9632 datasheet and its typical application circuits to select feedback values, termination, and compensation. If those values are not stated for the intended configuration, request manufacturer guidance before applying the design to high-volume production.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The manufacturer product page and family descriptions do not provide the exact environmental-compliance declarations for the AD9632AN ordering code. Compliance fields therefore remain unknown rather than being inferred from the family name.

Data napatotohanan sa: 2026-11-10 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

AD9632AN datasheet AD9632AN datasheet pdf AD9632AN pinout AD9632AN specifications AD9632AN 320 MHz AD9632AN gain of 2 AD9632AN 8-pin PDIP AD9632AN equivalent AD9632AN replacement AD9632AN vs AD9631 AD9632AN price AD9632AN stock Analog Devices AD9632AN AD9632AN ADC driver AD9632AN active filter

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices AD9632AN AD9632 AD9631 AD9621 AD9622 operational amplifier voltage-feedback amplifier high-speed op amp analog signal conditioning small-signal bandwidth large-signal bandwidth minimum stable gain ultralow distortion 8-pin PDIP surface mount through-hole package analog-to-digital converter active filter communications signal conditioning
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ