Analog Devices

AD9858BSV - 1 GSPS 10-Bit DDS | Analog Devices | RF Synthesis

MPN: AD9858BSV ✓ Nakahanda
3.3 V Vdss 100-lead TQFP exposed-pad, 14 mm × 14 mm Package 32 bit Speed
MOQ: 1 |

AD9858BSV Ulas

Analog Devices AD9858BSV is a 1 GSPS direct digital synthesizer with an internal 10-bit DAC, housed in a 100-lead TQFP exposed-pad package measuring 14 mm by 14 mm. It generates digitally programmable sine-wave signals up to 400 MHz and includes a 32-bit tuning word for frequency control. The device also accepts an external reference clock as high as 2 GHz through its divide-by-2 clock input.

A direct digital synthesizer, or DDS, is a frequency-generation architecture that uses a digital phase accumulator, phase-to-amplitude conversion, and a DAC to produce a digitally controlled analog output. Unlike a conventional analog oscillator whose frequency is adjusted with component tolerances, a DDS derives output frequency from a digital tuning word and reference clock. The AD9858BSV therefore belongs to the frequency synthesizer hierarchy, combining clock generation, digital signal synthesis, and data conversion functions in one integrated circuit.

The AD9858BSV combines a 1 GSPS internal DAC, 32-bit frequency tuning, and an analog output capable of reaching 400 MHz. Its 10-bit DAC resolution provides 1024 amplitude steps, while the 32-bit tuning word supports precise digital frequency programming. The input-reference divider permits operation with reference-clock rates up to 2 GHz. These characteristics make the device suitable for RF signal generation, waveform testing, communications equipment, and frequency-synthesis subsystems.

Technically, the AD9858BSV combines advanced DDS technology with a high-speed internal DAC. This integration removes the need for a separate DAC in conventional direct digital synthesis architectures and allows phase, frequency, and amplitude-related functions to be controlled digitally. The exposed thermal pad under the 100-lead package provides the primary heat-spreading path during operation, making PCB thermal design and via placement important at elevated update or output rates.

Typical uses include swept-sine-wave generation for receiver testing, local-oscillator implementations in communications equipment, programmable clock and waveform sources for automated test systems, and reference-generation circuits in RF instrumentation. Its output frequency is set through a serial programming interface, allowing multiple instruments or embedded systems to share a common control architecture while synthesizing different frequencies.

Designers should treat the exposed pad, analog output network, reference-clock integrity, and serial interface as one complete high-frequency subsystem. The manufacturer data sheet specifies the 3.3 V operating supply, the pin configuration, bypass requirements, and output implementation details. Decoupling should follow the manufacturer recommendations, and the analog output should be evaluated for filtering, amplitude calibration, and unwanted harmonic content before use in precision RF measurements.

This page organizes the AD9858BSV specifications, sourcing information, comparison points, and application guidance around the manufacturer's published device characteristics. It also distinguishes the exact AD9858BSV ordering code from the closely related AD9858BSVZ and identifies where design verification must rely on the complete manufacturer data sheet and pin-description tables.

Mga alternatibo na pwedeng ilagay na AD9858BSV — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

AD9858BSVZ

✅ Drop-In
📦 100-lead TQFP exposed-pad, 14 mm × 14 mm
Lead-free Z ordering option; 1 GSPS, 10-bit resolution, 32-bit tuning word, and 100-pin exposed-pad package remain unchanged

📋 Alternatibo na Reference (hindi sa katalogo)

AD9858BSV Mga Spesipikasyon

Device Type Direct Digital Synthesizer (DDS)
Maximum DAC Update Rate 1 GSPS
DAC Resolution 10 bit
Frequency Tuning Word Resolution 32 bit
Maximum Analog Output Frequency 400 MHz
Maximum External Reference Clock 2 GHz
Reference Input Divider Divide-by-2
Analog Output Count 1 output
Volte ng Pagbibigay 3.3 V
Hanay ng Temperature na Operasyon -40 °C to +85 °C
Packhaging 100-lead TQFP exposed-pad, 14 mm × 14 mm
Bilang ng Pin 100 pins
Uri ng Pagpapasok Surface mount
Technology Direct digital synthesis with internal DAC
Production Status Production
Type ng Output Analog sine-wave output

Gabay sa Pin Configuration ng AD9858BSV 100-lead tqfp exposed-pad, 14 mm × 14 mm

Pin configuration para sa AD9858BSV (100-lead tqfp exposed-pad, 14 mm × 14 mm package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 100-lead tqfp exposed-pad, 14 mm × 14 mm package para sa AD9858BSV

Wala ng detalyadong pinout data na magagamit para sa AD9858BSV.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

AD9858BSV ay nararapat para sa 6 aplikasyons: RF Local Oscillator Generation, Communications Test Signal Source, Automated Swept-Sine Generator, Instrumentation Signal Source, Frequency-Synthesis Subsystem, Precision Clock and Tone Generation.

🌐

RF Local Oscillator Generation

The AD9858BSV suits RF local-oscillator generation because its 32-bit tuning word provides direct digital frequency control while the internal 10-bit DAC supports analog output frequencies up to 400 MHz. It can replace a combination of oscillator, frequency divider, and separate DAC stages in systems where the local-oscillator frequency must be reprogrammed digitally. The principal design consideration is output quality: the selected operating point must satisfy the required phase-noise and spurious-signal limits after the recommended analog reconstruction network. A clean reference clock and well-controlled supply are also important because timing and supply noise can appear as phase noise or modulation sidebands. PCB implementation should use short analog traces, a stable reference distribution network, and a thermal design that supports the exposed pad at the chosen DAC update rate.

📡

Communications Test Signal Source

The AD9858BSV can provide a programmable sine-wave source for communications testing because it combines digital frequency programming with a 1 GSPS DAC and an analog output reaching 400 MHz. Engineers can use the 32-bit tuning word to set channel-related frequencies accurately and change them through the serial control interface without retuning analog components. The output chain should include filtering appropriate to the band under examination so that harmonics and image-related products do not obscure the intended carrier. When the source is used for receiver sensitivity, modulation-depth, or adjacent-channel tests, verify amplitude calibration and spectral purity across the complete operating range. The 3.3 V supply and exposed thermal pad require a low-impedance decoupling network and adequate copper area to prevent voltage variation from affecting the synthesized output.

🖥️

Automated Swept-Sine Generator

The AD9858BSV is well suited to automated swept-sine generation because the 32-bit frequency tuning word permits digital frequency changes across a broad range while the analog output remains centered on a fixed physical output path. This architecture is useful in automated test equipment, signal-conditioning subsystems, and bench instruments that need repeatable frequency steps without physically adjustable oscillators. A microcontroller or programmable controller can calculate the tuning word and send serial updates, simplifying calibration tables and test sequences. The design should compensate for amplitude variation across frequency because the 10-bit DAC and subsequent analog network may not provide flat response by themselves. Include suitable reconstruction filtering and verify settling behavior at each frequency step. Thermal performance should be characterized at the highest update rate and sustained-duty-cycle condition because the exposed pad carries heat away from the high-speed mixed-signal circuitry.

🔧

Instrumentation Signal Source

The AD9858BSV can serve as a high-speed instrumentation signal source where a stable, digitally controlled sine wave is needed for measurement calibration or subsystem excitation. Its maximum analog output frequency of 400 MHz makes it applicable to RF and high-speed analog test paths, while the internal DAC removes the need for a separate waveform converter in many designs. The output amplitude and frequency should be calibrated as a combined system because the DAC step size, reconstruction filter, board losses, and load impedance all influence the delivered signal. Reference-clock quality directly affects frequency stability and phase noise, so routing should emphasize short paths, controlled return current, and isolation from noisy digital systems. The 100-lead exposed-pad footprint also needs deliberate via and copper placement to avoid thermal throttling or performance drift during sustained generation.

⚡

Frequency-Synthesis Subsystem

The AD9858BSV fits a frequency-synthesis subsystem that requires a compact, digitally programmable RF output rather than a complete clock-only generator. The AD9858BSV provides a 1 GSPS internal DAC, a 32-bit tuning word, and one analog output, allowing it to consolidate several discrete functions in the RF signal path. Designers can pair it with a suitable reference source, digital controller, output filter, and gain-control network to form a complete source module. The reference clock may operate as high as 2 GHz through the documented divide-by-2 input, providing flexibility in system clock architecture. Keep analog and digital return paths separated carefully because the high-speed converter and serial control circuitry coexist in one package. Component and layout choices around the exposed pad directly affect thermal reliability and should be validated at the maximum operating temperature.

🔧

Precision Clock and Tone Generation

The AD9858BSV can generate digitally controlled tones for clocking, modulation, and calibration functions in high-speed electronic systems. Its 32-bit tuning word offers fine frequency resolution, while the internal 10-bit DAC supports single-channel analog waveform generation without a separate converter. This makes it useful in test-clock trees, signal generators, and mixed-signal modules where the required output is deterministic and digitally selectable. The analog output must be conditioned for the intended load, and any required filtering should be designed with the 1 GSPS operating capability in mind. Supply bypassing should follow the manufacturer layout guidance because reference and converter performance can be sensitive to high-frequency impedance. For battery-powered or thermally constrained equipment, estimate the worst-case dissipation across voltage, update-rate, and output-load conditions before finalizing the board layout.

What is the AD9858BSV?
The AD9858BSV is a 1 GSPS direct digital synthesizer with an internal 10-bit DAC and a 32-bit frequency tuning word. Analog Devices specifies a maximum analog sine-wave output frequency of 400 MHz in the AD9858 data sheet, Rev. C. The device combines digital phase accumulation, phase-to-amplitude conversion, and DAC output functions in a 100-lead TQFP exposed-pad package.
What is the output frequency range of AD9858BSV?
The AD9858BSV can generate an analog sine-wave output up to 400 MHz according to the Analog Devices AD9858 data sheet, Rev. C. Its frequency is programmed digitally through the 32-bit tuning word, while the internal 10-bit DAC converts the calculated phase value into the analog output. The exact minimum operating output and usable margin near the upper limit depend on the reference-clock and system configuration.
Where can I download the AD9858BSV datasheet PDF?
The official AD9858BSV data sheet is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD9858.pdf. It contains the device description, electrical characteristics, pin descriptions, application information, and the exposed-pad package drawing. Use the package pin-description table and connection details in that document when assigning signals to the 100-lead TQFP footprint.
Where can I find the AD9858BSV pinout?
The AD9858BSV pinout is defined by the pin-description table in the official Analog Devices AD9858 data sheet, Rev. C. Because the device uses a 100-lead TQFP exposed-pad package, signal and power assignments should be transcribed directly from that table rather than inferred from another DDS. Use the Request a Quote form on this page for the exact ordering code and assembly information.
What clock frequency can AD9858BSV accept?
The AD9858BSV accepts an external reference clock as high as 2 GHz through the divide-by-2 clock input described by Analog Devices. Its reference input divider allows the synthesizer to use a high-rate external clock while preserving a stable timing reference for the digital phase accumulator. Reference distribution and clock jitter must still be evaluated against the required output phase-noise performance.
Is AD9858BSV suitable for RF signal generation?
Yes, the AD9858BSV is suitable for RF signal generation because it combines a 1 GSPS DAC with an analog output reaching 400 MHz and a 32-bit digital tuning word. It can serve as a programmable local oscillator, swept source, or test-signal generator. For demanding receiver tests, evaluate phase noise, spurious performance, output filtering, and amplitude accuracy in the intended frequency band.
What can replace the AD9858BSV?
The closest documented same-package alternative is the AD9858BSVZ, which uses the same 100-lead TQFP exposed-pad format and the same 1 GSPS, 10-bit DDS architecture. The principal documented ordering difference is that the Z version is lead-free, while the AD9858BSV is the non-Z ordering code. Confirm RoHS, assembly, and temperature requirements before treating it as an exact substitute.
Is AD9858BSVZ the same as AD9858BSV?
AD9858BSVZ is the lead-free version of the AD9858BSV and retains the same 100-lead exposed-pad package and principal DDS specifications. The AD9858BSVZ listing identifies a 10-bit direct digital synthesis IC with a 1 GHz operating rate and 32-bit tuning word. Before replacement, verify the exact pin arrangement, temperature grade, package marking, and production requirements against the manufacturer data sheet.
AD9858BSV vs AD9858BSVZ — which is better for a new design?
AD9858BSVZ is generally the more appropriate ordering code for a new lead-free assembly because it documents the Z suffix as a lead-free package. Both parts use the same 100-lead TQFP exposed-pad outline and are based on the 1 GSPS, 10-bit AD9858 synthesizer. Select between them only after checking the exact manufacturer ordering table, PCB footprint, temperature range, and supply-chain requirements.
When should I choose AD9858BSV over another DDS?
Choose the AD9858BSV when the design needs an integrated direct digital synthesizer with a 1 GSPS DAC, a 32-bit tuning word, an analog output up to 400 MHz, and a 100-lead exposed-pad package. It is especially appropriate when digital frequency control, high update rate, and a compact RF-capable output outweigh the heat-management demands of a high-speed mixed-signal package.
Where can I buy AD9858BSV online?
Use the Request a Quote form on this page to request AD9858BSV availability, current commercial terms, and lead time. The form lets the purchasing request be matched to the exact AD9858BSV ordering code instead of a related AD9858 package variant. Current inventory and delivery scheduling should be confirmed when the quotation is returned.
What is the price of AD9858BSV?
Current commercial pricing for the AD9858BSV is obtained through the Request a Quote form on this page. The quote request should identify AD9858BSV, the desired quantity, and the target delivery location so that availability and scheduling can be evaluated against the exact orderable configuration. This page does not embed a static price that may become stale.
Is AD9858BSV in stock and what is its lead time?
AD9858BSV stock status and lead time should be confirmed through the Request a Quote form on this page. The request should include the required quantity and expected delivery schedule because availability can change with demand and manufacturing allocation. Analog Devices identifies the AD9858 family as production, but a product-family status does not by itself guarantee immediate stock for every order quantity.
What are the key specifications of AD9858BSV that engineers should know?
The AD9858BSV combines a 1 GSPS internal DAC, 10-bit resolution, a 32-bit frequency tuning word, and an analog output frequency capability up to 400 MHz. It operates from a 3.3 V supply, accepts a reference clock up to 2 GHz with divide-by-2 input support, and is specified over -40 °C to +85 °C. The 100-lead TQFP exposed-pad package is central to both routing and thermal design.
How should the AD9858BSV exposed pad be handled on a PCB?
The AD9858BSV exposed pad must be connected according to the Analog Devices package and land-pattern guidance and used as the principal thermal path. Place thermal vias beneath or near the pad where PCB geometry permits, and provide a continuous copper connection to the required supply or ground net. Validate via current limits and the final assembly process so the thermal path is not interrupted during soldering.

Impormasyon ng Talumpati sa Engineering for AD9858BSV — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the AD9858BSV when a compact, digitally programmable RF sine-wave source is required and the design can accommodate the thermal demands of a 1 GSPS mixed-signal IC. Its 10-bit internal DAC, 32-bit tuning word, and analog output capability up to 400 MHz make it appropriate for RF test, communications instrumentation, and local-oscillator subsystems. Choose AD9858BSVZ when a documented lead-free ordering option is preferred and its package, marking, and lifecycle details satisfy the assembly requirements. The two choices share the same principal architecture and package, so selection should focus on ordering-code, compliance, and manufacturing requirements rather than expected performance differences. Do not select a DDS with fewer pins or a different control interface unless PCB redesign is acceptable. Before releasing hardware, verify the complete pin assignment, output reconstruction network, reference-clock jitter, thermal path, and behavior across the required frequency and temperature ranges.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto AD9858BSVZ
Package 100-lead TQFP exposed-pad, 14 mm × 14 mm 100-lead TQFP exposed-pad, 14 mm × 14 mm
Brand Analog Devices Analog Devices
Device Type Direct Digital Synthesizer (DDS) Direct Digital Synthesis IC (DDS)
Maximum DAC Update Rate 1 GSPS 1 GHz
DAC Resolution 10 bit 10 bit
Frequency Tuning Word Resolution 32 bit 32 bit
Supply Voltage 3.3 V 3.30 V
Lead-Free Ordering Option AD9858BSV Z suffix denotes lead-free package

Pangunahing mga Pagkakaiba

  • Directly programmable RF output (kumpara saAD9858BSVZ)
  • High-speed integrated conversion (kumpara saAD9858BSVZ)
  • Compact exposed-pad integration (kumpara saAD9858BSVZ)

Talaan ng Disenyo

Treat the exposed pad as the primary thermal path for the 100-lead TQFP package. Connect it according to the manufacturer land-pattern guidance and provide a large uninterrupted copper region with several thermal vias where PCB construction permits. Validate via sizes against assembly capability, and evaluate junction-temperature margin at the maximum DAC update rate and highest ambient temperature.

Place input, output, and reference-clock decoupling components directly beside their associated pins, following the exact capacitor values and return paths in the manufacturer application information. Keep the analog output route short and isolate it from serial-clock and data traces. Use a continuous ground reference beneath the device rather than fragmented planes that increase high-frequency return-path inductance.

Preserve the quality of the reference clock because timing jitter and supply variation can degrade phase noise and spurious performance. Route the clock over a continuous reference plane, keep stubs short, and isolate the reference source from switching outputs where practical. Characterize the complete output filter and load rather than judging DDS performance from the raw DAC node.

Do not assume that any AD9858 ordering code is interchangeable solely because the package drawings look similar. The AD9858BSVZ is a documented related option, but verify the exact pin assignments, temperature range, lead-free status, exposed-pad connection, and assembly marking. Also avoid programming the output beyond the specified 400 MHz capability or assuming that 1 GSPS update rate means a 1 GHz analog sine-wave output.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The AD9858BSVZ ordering option is documented as lead-free. No RoHS, REACH, halogen-free, or conflict-minerals declaration for the exact AD9858BSV ordering code was identified.

Data napatotohanan sa: 2026-11-15 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

AD9858BSV datasheet AD9858BSV pinout AD9858BSV datasheet pdf AD9858BSV specifications AD9858BSV 1 GSPS AD9858BSV 400 MHz AD9858BSV TQFP-100 AD9858BSV replacement AD9858BSV equivalent AD9858BSV vs AD9858BSVZ Analog Devices AD9858BSV AD9858BSV RF signal generator AD9858BSV price AD9858BSV stock

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices AD9858BSV AD9858BSVZ AD9858 Direct Digital Synthesizer DDS frequency synthesizer clock generator phase accumulator phase-to-amplitude conversion digital-to-analog converter 10-bit DAC 1 GSPS 32-bit tuning word 400 MHz analog output 2 GHz reference clock divide-by-2 clock input 3.3 V supply 100-lead TQFP exposed pad surface-mount package RF local oscillator frequency tuning word phase noise analog reconstruction filter
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ