Analog Devices

ADV7180WBST48Z - 10-Bit SDTV Video Decoder | Analog Devices

MPN: ADV7180WBST48Z ✗ Tapus ng Buhay
NTSC, PAL, SECAM Rds(on) 48-LQFP, 7 mm × 7 mm Package
MOQ: 1 |

ADV7180WBST48Z Ulas

Analog Devices ADV7180WBST48Z is a 10-bit, 4× oversampling SDTV video decoder with support for NTSC, PAL, and SECAM signals, supplied in a 48-LQFP 7 mm × 7 mm package. It converts standard analog baseband television signals into 4:2:2 component-video data and provides a serial ITU-R BT.656 output alongside I²C control.

A video decoder is an interface IC that recovers digital pixel data from an analog composite or component video signal. Within the signal-chain hierarchy, the ADV7180 sits between an analog video input and downstream MPEG encoders, codecs, mobile video processors, or other digital video-processing equipment. Its primary purpose is to normalize regional analog television formats into a standardized digital-video representation.

The decoder's 10-bit processing resolution provides the headline quantization level, while 4× oversampling supports the analog-to-digital conversion stage. Automatic input-format detection is designed to simplify decoding of NTSC, PAL, and SECAM sources. The serial ITU-R BT.656 output can connect to compatible downstream processors, and the I²C interface provides a standardized control path for configuration and device management.

The ADV7180 family uses monolithic CMOS construction to combine analog decoding and digital output functionality with lower power dissipation than a discrete implementation. The ADV7180WBST48Z is packaged in a 48-lead LQFP measuring 7 mm × 7 mm, providing a conventional surface-mount option for industrial, consumer, and legacy video-processing equipment. Analog Devices marks the ADV7180 as not recommended for new designs, so it is primarily relevant to maintenance, repair, and previously designed systems.

Typical uses include converting legacy analog television or surveillance-video sources into digital component data, supporting video capture in professional equipment, and interfacing analog broadcast standards with embedded video processors. The standardized 4:2:2 output format and BT.656 serial interface make the device useful when the downstream system already expects parallel-component-video timing.

Designers should preserve the package's analog and digital supply arrangement, provide the decoupling and clocking required by the manufacturer application guidance, and verify signal amplitude and synchronization behavior before enabling output. Because the device is not recommended for new designs, new platforms should evaluate current decoding solutions unless compatibility with an existing ADV7180 circuit is mandatory.

This product page brings together device specifications, lifecycle status, application guidance, package considerations, and a verified drop-in replacement assessment. It also distinguishes a functionally identical ordering option from true engineering alternatives, helping engineers decide when PCB reuse is justified and when a legacy decoder should remain in service.

Mga alternatibo na pwedeng ilagay na ADV7180WBST48Z — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

ADV7180WBST48Z-RL

✅ Drop-In
📦 48-LQFP (7x7 mm)
Reel-oriented ordering form with the same 10-bit decoder function, 48-LQFP footprint, terminals, and principal performance characteristics; no functional parameter difference stated.

📋 Alternatibo na Reference (hindi sa katalogo)

ADV7180WBST48Z Mga Spesipikasyon

Device Type 10-bit SDTV video decoder
Video Processing Resolution 10 bit
Oversampling 4×
Supported Analog Standards NTSC, PAL, SECAM
Digital Output Format 4:2:2 component video
Serial Output Standard ITU-R BT.656
Control Interface I²C
Automatic Format Detection Supported
Packhaging 48-LQFP, 7 mm × 7 mm
Lead Count 48 leads
Uri ng Pagpapasok Surface mount
Construction Monolithic CMOS
Lifecycle Recommendation Not recommended for new designs
Standard Output Resolution ITU-R BT.656

Gabay sa Pin Configuration ng ADV7180WBST48Z 48-lqfp, 7 mm × 7 mm

Pin configuration para sa ADV7180WBST48Z (48-lqfp, 7 mm × 7 mm package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 48-lqfp, 7 mm × 7 mm package para sa ADV7180WBST48Z

Wala ng detalyadong pinout data na magagamit para sa ADV7180WBST48Z.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

ADV7180WBST48Z ay nararapat para sa 6 aplikasyons: Legacy Broadcast Video Conversion, Analog Surveillance Video Capture, Professional Video Test Equipment, Industrial Video Inspection Systems, Consumer AV Retrofit Equipment, Medical and Industrial Display Feed Conversion.

📺

Legacy Broadcast Video Conversion

The ADV7180WBST48Z fits systems that must accept NTSC, PAL, or SECAM analog baseband television signals and produce standardized digital component data. Its 10-bit processing and 4× oversampling provide the conversion characteristics, while automatic format detection reduces configuration effort when regional standards may vary. The 4:2:2 ITU-R BT.656 output can feed an encoder, codec, capture engine, or embedded processor that already accepts this format. The main design consideration is interface continuity: because the device uses a 48-LQFP footprint and I²C configuration, the surrounding PCB, clocking, decoupling, and control software should be validated together.

🎥

Analog Surveillance Video Capture

The ADV7180WBST48Z is appropriate for legacy surveillance equipment that accepts composite video and must transfer decoded imagery into a digital recording pipeline. Automatic handling of NTSC, PAL, and SECAM supports camera sources associated with different regional standards, while 4:2:2 component output provides a conventional format for downstream encoders and processors. The 10-bit conversion level is the relevant headline performance parameter for this interface stage. Installation work should verify composite signal amplitude, synchronization, I²C addressing, and BT.656 timing rather than assuming every installation uses the same signal integrity and grounding conditions.

🔧

Professional Video Test Equipment

The ADV7180WBST48Z can serve as the analog front end of test and measurement equipment that evaluates legacy television signals. Its automatic NTSC, PAL, and SECAM detection reduces operator intervention, and the 4:2:2 BT.656 output provides analyzable pixel data for downstream measurement or reference generation. The 10-bit processing resolution and 4× oversampling are useful when the decoder must preserve more signal-state detail than an 8-bit-only interface implies. Calibration routines should account for the analog input range, channel gain, synchronization timing, and system clock before correlating decoded output with the original composite waveform.

🏭

Industrial Video Inspection Systems

The ADV7180WBST48Z is suitable for older industrial inspection systems that receive standard-definition analog video from cameras and require a digital interface to a processor. Its support for NTSC, PAL, and SECAM allows one decoder stage to handle multiple camera-system conventions, while the 48-LQFP package supports conventional PCB assembly and rework. The serial 4:2:2 output can be routed to a capture or encoding block such as an ADV7179 variant. Engineers should assess latency, analog-noise behavior, grounding, and synchronization margin under the actual camera cable length and industrial enclosure conditions before production release.

📱

Consumer AV Retrofit Equipment

The ADV7180WBST48Z can serve in retrofit or conversion products intended to preserve legacy analog television sources within a modern digital workflow. Its automatic detection of NTSC, PAL, and SECAM simplifies adaptation for users with equipment from different regions, and its 4:2:2 BT.656 output provides a stable link to compatible encoders and USB or network interfaces. The decoder’s 10-bit processing provides a defined conversion baseline for ordinary standard-definition use. Product planners should ensure that the decoder, encoder, clocks, and power rails are synchronized, and should verify that the legacy format can be accommodated without unacceptable latency or scaling artifacts.

💊

Medical and Industrial Display Feed Conversion

The ADV7180WBST48Z can be used in specialized display-feed equipment that must translate legacy analog video into a digital format before onward processing. NTSC, PAL, and SECAM support accommodates varied source installations, and the 4:2:2 output at 10-bit processing resolution provides a defined digital representation for subsequent scaling, recording, or display control. The device should be placed close enough to the analog source to minimize cable-related degradation, with attention to grounding and synchronization. Because the ADV7180 is not recommended for new designs, medical and industrial projects should evaluate whether an existing board-level reuse justifies lifecycle risk or whether a currently supported decoder better satisfies validation requirements.

What is the ADV7180WBST48Z?
The ADV7180WBST48Z is a 10-bit, 4× oversampling SDTV video decoder in a 48-LQFP 7 mm × 7 mm package. Analog Devices describes it as an IC that automatically detects and converts NTSC, PAL, and SECAM analog baseband television signals into 4:2:2 component-video data. According to the manufacturer datasheet, its serial output conforms to the 8-bit ITU-R BT.656 interface and configuration is performed through I²C.
What video standards does ADV7180WBST48Z support?
The ADV7180WBST48Z supports NTSC, PAL, and SECAM analog video standards. According to the Analog Devices ADV7180 datasheet, automatic standard detection lets the decoder identify compatible analog baseband television signals and convert them into 4:2:2 component video. The resulting data can follow the serial ITU-R BT.656 interface for connection to compatible encoders, codecs, mobile video processors, and other digital video equipment.
Where can I download the ADV7180WBST48Z datasheet?
The official ADV7180 datasheet and product resources are available from Analog Devices through the manufacturer product page at https://www.analog.com/en/products/adv7180.html. The page identifies the ADV7180 as not recommended for new designs and links to the current data sheet. Use the manufacturer’s pin-description and application material when assigning the 48-LQFP connections and selecting external decoupling, clock, and analog-video components.
Where can I find the ADV7180WBST48Z pinout?
The ADV7180WBST48Z pinout is documented in the pin-description section of the Analog Devices ADV7180 manufacturer datasheet. The device uses a 48-LQFP package with 7 mm × 7 mm dimensions. Follow the numbering shown in the manufacturer package drawing and its terminal-description table when assigning PCB nets, particularly for the duplicated pin-number reporting associated with HS and DVDDIO documentation.
What is the output format of ADV7180WBST48Z?
The ADV7180WBST48Z outputs 4:2:2 component-video data through a serial ITU-R BT.656 interface. According to the Analog Devices ADV7180 datasheet, this standardized digital representation is suitable for glueless connection to MPEG encoders, codecs, mobile video processors, and compatible digital video systems. The decoder processes analog baseband input at 10-bit resolution using 4× oversampling before producing the digital output.
What is the difference between ADV7180WBST48Z and ADV7180WBST48Z-RL?
ADV7180WBST48Z-RL is the reel-oriented ordering form of the ADV7180WBST48Z and retains the same 10-bit video-decoder function and 48-LQFP 7 mm × 7 mm package. The comparison information identifies the terminals, package, and principal performance characteristics as consistent. Confirm the required reel format, labeling, and quantity requirements with the supplier before treating the two orderable identifiers as interchangeable for procurement.
What can replace the ADV7180WBST48Z?
ADV7180WBST48Z-RL is the closest drop-in ordering alternative because it uses the same 48-LQFP package and has consistent terminals and principal functional characteristics. Other decoder families may provide similar analog-video conversion, but they cannot be assumed to be drop-in replacements without package and pinout verification. Use the Request a Quote form on this page to confirm the exact replacement suffix and current procurement conditions.
Is ADV7180WBST48Z suitable for new designs?
The ADV7180WBST48Z is not the preferred choice for a new design because Analog Devices marks the ADV7180 as not recommended for new designs. It remains appropriate for repairing or extending equipment whose existing circuit, PCB layout, and signal expectations are based on this decoder. For new systems, compare the required analog-video formats, digital interface, lifecycle status, and software or register compatibility with currently recommended devices.
Is ADV7180WBST48Z still in stock?
Current stock status can change by package, region, and order quantity, so the Request a Quote form on this page is the appropriate route for an exact availability check. Provide the ADV7180WBST48Z manufacturer part number, required quantity, and reel or tray preference. The manufacturer identifies the ADV7180 family as not recommended for new designs, which makes purchasing for maintenance and existing platforms different from sourcing a new-production component.
Where can I buy ADV7180WBST48Z online?
Use the Request a Quote form on this page to request ADV7180WBST48Z availability, lead time, and order quantities. Quote the complete manufacturer part number exactly as ADV7180WBST48Z to avoid confusion with the -RL ordering form or unrelated video-decoder products. Because the ADV7180 is not recommended for new designs, confirm lifecycle status, traceability, and packaging requirements before committing the component to a maintenance schedule.
What is the price of ADV7180WBST48Z?
Current pricing for ADV7180WBST48Z is presented through the Request a Quote form on this page rather than as a static price statement. Submit the exact MPN, quantity, and packaging requirement so the quote reflects the appropriate order configuration. The ADV7180WBST48Z-RL reel form should not be assumed to have the same commercial terms as the standard ordering code without confirming the exact suffix.
What is the lead time for ADV7180WBST48Z?
Lead time for ADV7180WBST48Z depends on current supplier inventory, manufacturing status, order quantity, and the exact package form. Request a quote using the exact MPN on this page to obtain the current allocation and expected delivery information. Because Analog Devices identifies the ADV7180 as not recommended for new designs, request a safety-stock or lifecycle-planning discussion for systems that must remain supported.
What are the key specifications of ADV7180WBST48Z engineers should know?
The principal specifications of the ADV7180WBST48Z are 10-bit processing, 4× oversampling, automatic NTSC/PAL/SECAM handling, 4:2:2 component-video output, serial ITU-R BT.656 signaling, I²C control, and a 48-LQFP 7 mm × 7 mm package. According to the Analog Devices ADV7180 datasheet, the device converts standard analog baseband television signals into digital data suitable for compatible downstream video processors.
ADV7180WBST48Z vs ADV7180WBST48Z-RL: which is better?
ADV7180WBST48Z-RL is preferable when the required deliverable is the reel-oriented ordering form, while the functional decoder performance and 48-LQFP electrical interface are equivalent. The comparison identifies consistent terminals, packages, and main performance parameters. Selection should therefore be based primarily on required order format, traceability, quantity, and current availability rather than expected signal-processing differences.
When should I choose ADV7180WBST48Z instead of another video decoder?
Choose the ADV7180WBST48Z when maintaining a system that already uses its 48-LQFP pin arrangement, I²C control method, 4:2:2 output, and ITU-R BT.656 interface. It is particularly relevant for NTSC, PAL, or SECAM analog-video conversion where PCB and firmware compatibility matter more than obtaining a currently recommended device. For a new platform, choose a currently supported decoder unless legacy compatibility provides a specific engineering benefit.

Impormasyon ng Talumpati sa Engineering for ADV7180WBST48Z — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose ADV7180WBST48Z when repairing or maintaining equipment designed around its 48-LQFP pinout, I²C control, and 4:2:2 ITU-R BT.656 output. It is particularly appropriate for legacy NTSC, PAL, and SECAM analog-video inputs where changing the PCB or downstream register behavior would be disruptive. ADV7180WBST48Z-RL is the practical drop-in alternative when the reel-oriented order form is required; its electrical function, package, and terminals match the standard ordering code. For a wholly new design, however, the manufacturer’s not-recommended-for-new-designs status makes this decoder a lifecycle-managed option rather than a preferred greenfield choice. Select a currently supported decoder instead when long-term availability, current qualification documentation, and a newer support roadmap outweigh the value of exact ADV7180 compatibility. Confirm analog-input requirements, clocks, supplies, timing, and downstream interfaces before ordering any replacement.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto ADV7180WBST48Z-RL
Brand Analog Devices Analog Devices
Package 48-LQFP (7x7 mm) 48-LQFP (7x7 mm)
Device Type SDTV video decoder SDTV video decoder
Processing Resolution 10 bit 10 bit
Oversampling 4× 4×
Supported Standards NTSC, PAL, SECAM NTSC, PAL, SECAM
Digital Output Format 4:2:2 component video 4:2:2 component video
Serial Output Interface ITU-R BT.656 ITU-R BT.656
Control Interface I²C I²C
Order Form Standard ordering code Reel-oriented ordering code

Pangunahing mga Pagkakaiba

  • Direct analog-video format compatibility (kumpara saADV7180WBST48Z-RL)
  • Existing PCB and control-system reuse (kumpara saADV7180WBST48Z-RL)
  • Order-format flexibility (kumpara saADV7180WBST48Z-RL)

Talaan ng Disenyo

Place the ADV7180WBST48Z in accordance with the manufacturer land pattern for the 48-LQFP 7 mm × 7 mm package. Keep analog video traces away from digital clock and BT.656 output routing, maintain continuous return paths, and follow the datasheet’s recommended input, output, and supply bypass connections. Because the device uses pin numbers referenced by both DVDDIO and HS documentation, finalize the PCB net assignment from the manufacturer pin-description table rather than secondary pinout reproductions.

Treat the analog video input as a sensitive baseband signal and follow the manufacturer’s recommended source impedance, termination, and filtering arrangements. Verify composite or component-video amplitude, synchronization polarity, chroma configuration, and timing before configuring automatic NTSC, PAL, or SECAM detection. A clean digital BT.656 output cannot compensate for clipping, excessive noise, reflection, or unstable synchronization at the analog input.

Separate analog and digital return currents and provide the device with the supply sequencing and decoupling described in the ADV7180 application guidance. Route the 27 MHz-related clock and BT.656 outputs away from the analog video input where practical, while keeping the I²C traces short and free of unnecessary stubs. Validate the complete decoder, clock source, and downstream processor timing with equivalent cable lengths and enclosure conditions used in the finished product.

Do not assume that any decoder with an LQFP package is a drop-in replacement. Compatibility requires verification of the 48-lead footprint, pin functions, supply levels, I²C register behavior, supported analog standards, and BT.656 timing. For ADV7180WBST48Z-RL, specifically distinguish the reel ordering suffix from electrical changes. For new products, account for the manufacturer’s not-recommended-for-new-designs status when establishing maintenance and obsolescence plans.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

No explicit compliance declarations were identified for this exact ordering code. Confirm environmental, material, and automotive-grade requirements with Analog Devices before production release.

Data napatotohanan sa: 2026-11-16 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

ADV7180WBST48Z datasheet ADV7180WBST48Z pinout ADV7180WBST48Z datasheet pdf ADV7180WBST48Z replacement ADV7180WBST48Z equivalent ADV7180WBST48Z vs ADV7180WBST48Z-RL ADV7180WBST48Z price ADV7180WBST48Z stock Analog Devices ADV7180WBST48Z ADV7180 48-LQFP video decoder ADV7180 NTSC PAL SECAM decoder ADV7180 BT.656 video interface ADV7180WBST48Z footprint ADV7180WBST48Z drop-in replacement ADV7180WBST48Z lead time

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices ADV7180WBST48Z ADV7180WBST48Z-RL ADV7180 SDTV video decoder video decoder interface IC video processing IC semiconductor 10-bit conversion 4× oversampling 4:2:2 component video ITU-R BT.656 I²C NTSC PAL SECAM 48-LQFP LQFP family surface mount monolithic CMOS analog baseband television signal automatic standard detection serial video interface not recommended for new designs
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ