Analog Devices

ADV7281WBCPZ - 10-Bit SDTV Video Decoder | Analog Devices

MPN: ADV7281WBCPZ ✗ Tapus ng Buhay
NTSC, PAL, and SECAM Rds(on) 32-lead LFCSP, 5 mm x 5 mm Package Line-locked clock (LLC) Speed YCrCb 4:2:2 Memory
MOQ: 1 |

ADV7281WBCPZ Ulas

The Analog Devices ADV7281WBCPZ is a 10-bit, 4-times-oversampled SDTV video decoder with four analog inputs and a 32-lead LFCSP package measuring 5 mm by 5 mm. It automatically detects composite, S-Video, and component video signals compatible with worldwide NTSC, PAL, and SECAM standards, then converts them into a digital YCrCb 4:2:2 video stream.

A video decoder is an interface IC that translates legacy analog baseband video into a standardized digital representation for processing, display, capture, or transmission. Within the signal-chain hierarchy, the ADV7281 sits between an analog video source and a digital video processor. Its 4:2:2 chroma format reduces data rate relative to full 4:4:4 sampling while preserving the luma and chroma information required by many SDTV applications.

The ADV7281 uses 4-times oversampling to improve decoding of analog video, and its 10-bit internal resolution supports detailed conversion of composite, S-Video, and component formats. Differential-input capability improves common-mode noise rejection when the source is balanced. The decoder also provides standard ITU-R BT.656 output through the P0-to-P7 data pins, together with a line-locked clock output for synchronization with downstream digital-video circuitry.

The device includes four analog video inputs and two standard-to-bar diagnostic outputs. Automatic signal detection reduces the configuration burden in systems that must accept several video standards. According to the Analog Devices ADV7281 Data Sheet, Rev. B, the component accepts single-ended, pseudo-differential, or fully differential analog inputs and emits a digital video stream based on the ITU-R BT.656 specification. The manufacturer identifies the ADV7281 family as not recommended for new designs.

Typical uses include SDTV video capture, industrial inspection equipment, broadcast monitoring, professional video conversion, security systems, and legacy video interface adapters. The ADV7281 is especially appropriate when an equipment designer must accept multiple analog video standards while presenting a conventional digital-video interface to an FPGA, ASIC, processor, or display controller.

PCB implementation should prioritize short analog traces, controlled return paths, and separate routing for analog inputs and digital outputs. Follow the manufacturer's decoupling and input network recommendations, and use the line-locked clock and reference interfaces exactly as described in the datasheet. Differential routing is beneficial when using fully differential sources, while single-ended routing requires appropriately scaled termination and biasing networks.

This page combines the manufacturer's device description with a focused replacement assessment, interface comparison, and practical implementation guidance. It helps engineers separate true pin-compatible options from related ADV7281 variants that differ in input count, automotive qualification, or temperature coverage before committing a new board revision.

Mga alternatibo na pwedeng ilagay na ADV7281WBCPZ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Wala ng magagamit na drop-in alternatibo para sa produkto na ito.

Hilingin ang Alternatibo

ADV7281WBCPZ Mga Spesipikasyon

Product Type 10-bit SDTV analog video decoder
Output Resolution 10 bit
Oversampling 4 times
Analog Video Inputs 4 inputs
Supported Video Standards NTSC, PAL, and SECAM
Digital Output Format ITU-R BT.656
Digital Chroma Format YCrCb 4:2:2
Digital Data Outputs 8 outputs, P0 to P7
Clock Output Line-locked clock (LLC)
Diagnostic Outputs 2 STB diagnostic pins
Analog Input Configuration Single-ended, pseudo-differential, or fully differential
Packhaging 32-lead LFCSP, 5 mm x 5 mm
Uri ng Pagpapasok Surface mount

Gabay sa Pin Configuration ng ADV7281WBCPZ 32-lead lfcsp, 5 mm x 5 mm

Pin configuration para sa ADV7281WBCPZ (32-lead lfcsp, 5 mm x 5 mm package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 32-lead lfcsp, 5 mm x 5 mm package para sa ADV7281WBCPZ

Wala ng detalyadong pinout data na magagamit para sa ADV7281WBCPZ.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

ADV7281WBCPZ ay nararapat para sa 6 aplikasyons: SDTV Video Capture, Industrial Inspection Equipment, Broadcast Video Monitoring, Security and Surveillance Video, Professional Video Conversion, Legacy Video Adapter.

🎥

SDTV Video Capture

The ADV7281WBCPZ fits an SDTV capture front end that must accept legacy analog baseband video and forward it to an FPGA, ASIC, or image processor. Its 10-bit, 4-times-oversampled decoder produces a YCrCb 4:2:2 stream on the P0-to-P7 outputs, while the line-locked clock provides the downstream sampling reference. Automatic NTSC, PAL, and SECAM detection reduces manual mode setup. The design should verify BT.656 timing at the selected pixel clock and implement the analog input networks recommended in the ADV7281 Data Sheet, Rev. B.

🏭

Industrial Inspection Equipment

The ADV7281WBCPZ is suitable for industrial inspection systems that receive analog camera or composite-video signals before conversion for machine-vision processing. Four analog inputs allow the decoder to support multiple source arrangements, while automatic standard detection helps accommodate changing NTSC, PAL, or SECAM sources. The YCrCb 4:2:2 output is suitable for a downstream processor that expects digital SDTV pixels. Designers should prioritize short analog paths, stable reference routing, and careful return-current management so that switching circuitry does not degrade the decoded image.

📺

Broadcast Video Monitoring

The ADV7281WBCPZ can serve as the decoding stage in broadcast monitoring equipment that must display or analyze conventional analog baseband feeds. It detects NTSC, PAL, and SECAM sources, supports composite, S-Video, and component arrangements, and provides a standardized digital output through ITU-R BT.656. This simplifies the connection to an FPGA-based display pipeline or digital monitor controller. For reliable monitoring, use controlled impedance for the eight parallel output lines and route the line-locked clock as a timing-critical signal with matched length to the associated pixel bus.

🏠

Security and Surveillance Video

The ADV7281WBCPZ is appropriate for security equipment that must accept legacy composite or S-Video camera signals and convert them for digital recording. Automatic format detection supports equipment intended for different regions, and the 4:2:2 output can feed a dedicated compression processor or an FPGA-based pipeline. The decoder's four inputs also allow structured use of multiple analog channels when the downstream architecture supports time-multiplexed processing. Maintain ground continuity between the analog source and decoder, isolate switching supplies from sensitive input routing, and validate signal amplitude against the manufacturer's recommended network.

🖥️

Professional Video Conversion

The ADV7281WBCPZ suits professional conversion equipment that translates several analog video standards into a common digital interface. Composite, S-Video, and component support gives users flexibility with legacy sources, while the 10-bit decoder and 4-times oversampling establish the conversion front end. The ITUR-R BT.656 output simplifies connection to parallel-video processing logic and provides a line-locked clock for pixel synchronization. The primary engineering trade-off is legacy-interface integration rather than modern compressed-video processing, so the converter should focus on format normalization, stable synchronization, and faithful input conditioning.

🔧

Legacy Video Adapter

The ADV7281WBCPZ is well suited to a legacy-video adapter that bridges analog cameras or test equipment to a digital processor. Its automatic NTSC, PAL, and SECAM detection reduces configuration burden, while YCrCb 4:2:2 output offers a practical interface for FPGA or ASIC capture logic. The 32-lead LFCSP footprint supports compact adapter boards, although careful layout remains necessary around the analog inputs and eight parallel data outputs. Confirm the package pin table, exposed-pad connection, input termination, and reference arrangement directly from the manufacturer datasheet before release.

What is the ADV7281WBCPZ?
The ADV7281WBCPZ is a 10-bit, 4-times-oversampled SDTV video decoder from Analog Devices. It converts composite, S-Video, and component analog video into a YCrCb 4:2:2 digital stream using the ITU-R BT.656 interface. The device has four analog inputs, eight parallel data outputs, and a 32-lead LFCSP package. These functions are described in the Analog Devices ADV7281 Data Sheet, Rev. B.
What video formats does the ADV7281WBCPZ support?
The ADV7281WBCPZ automatically detects analog baseband video compatible with worldwide NTSC, PAL, and SECAM standards. It accepts composite, S-Video, and component sources through its four analog inputs and converts them into YCrCb 4:2:2 digital video. According to the Analog Devices ADV7281 Data Sheet, Rev. B, the inputs may be single-ended, pseudo-differential, or fully differential.
What is the digital video output format of the ADV7281WBCPZ?
The ADV7281WBCPZ outputs 8-bit digital video data through the P0-to-P7 pins in accordance with the ITU-R BT.656 specification. It also provides a line-locked clock output, labeled LLC, so downstream circuitry can sample the pixel stream at a stable timing reference. The decoded chroma representation is YCrCb 4:2:2 rather than full 4:4:4.
Where can I download the ADV7281WBCPZ datasheet PDF?
The official ADV7281WBCPZ datasheet is available from Analog Devices through the manufacturer's ADV7281 Data Sheet, Rev. B. It contains the decoder architecture, input configurations, pin descriptions, timing information, and application details needed for PCB and firmware design. Use the Analog Devices PDF at analog.com/media/en/technical-documentation/data-sheets/ADV7281.PDF for the authoritative document.
Where is the ADV7281WBCPZ pinout located?
The ADV7281WBCPZ pinout and pin-description table are located in the pinout section of the Analog Devices ADV7281 Data Sheet, Rev. B. The device uses a 32-lead LFCSP package with four analog video inputs, two diagnostic outputs, eight parallel digital outputs, clocking and control signals, and supply pins. Use that table when assigning tracks and confirming exposed-pad connections.
How many analog video inputs does the ADV7281WBCPZ have?
The ADV7281WBCPZ provides four analog video inputs. These channels can accommodate composite, S-Video, or component video, with automatic recognition of supported NTSC, PAL, and SECAM baseband formats. The four-input count distinguishes this variant from related ADV7281 family members with additional analog inputs, so input assignments should not be copied between family variants without checking their individual pin tables.
Is the ADV7281WBCPZ suitable for a digital video capture system?
The ADV7281WBCPZ is suitable for SDTV capture systems that receive analog baseband video and require an ITU-R BT.656 output. Its 4-times oversampling, 10-bit conversion resolution, automatic standard detection, and YCrCb 4:2:2 output simplify the analog front end. The downstream FPGA, ASIC, processor, or capture IC must support the selected BT.656 timing and YCrCb pixel format.
What is the best drop-in replacement for the ADV7281WBCPZ?
The ADV7281WBCPZ-RL is the closest documented same-configuration choice because it retains the ADV7281WBCPZ electrical identity and 32-lead LFCSP footprint while changing the shipment form. However, it is a reel-oriented packaging designation rather than a distinct engineering alternative. Confirm the manufacturer ordering code, pin table, exposed-pad treatment, and temperature marking before treating it as a drop-in replacement.
Can ADV7281WBCPZ-M replace the ADV7281WBCPZ?
The ADV7281WBCPZ-M should not be treated as a pin-for-pin replacement without a detailed pin-table review. It belongs to the same ADV7281 decoder family and uses a 32-lead LFCSP package, but the -M version supports six analog inputs and additional general-purpose outputs. Those additional functions can alter pin utilization, making a package-code match insufficient evidence of drop-in compatibility.
When should I choose the ADV7281WBCPZ over a newer video decoder?
Choose the ADV7281WBCPZ when an existing design specifically requires the four-input, non-automotive ADV7281 configuration and its established analog, digital, and clock interfaces remain unchanged. Because Analog Devices marks the family as not recommended for new designs, evaluate a current decoder for fresh designs when long-term lifecycle support matters. Existing compatible boards may still use the original device where its documented functions are sufficient.
Is the ADV7281WBCPZ active for new designs?
The ADV7281WBCPZ is not recommended for new designs, although the manufacturer continues to publish product documentation and related ordering information. The appropriate lifecycle classification is NRND rather than a full end-of-life statement. For a new project, request a current production-status review and consider a supported decoder unless the original ADV7281 configuration is mandatory.
Where can I buy the ADV7281WBCPZ?
Use the Request a Quote form on this page to request the current ADV7281WBCPZ price, stock position, minimum order quantity, and lead time. The form provides a direct purchasing route without embedding a static quotation that may become outdated. Specify the 32-lead LFCSP package, tray or reel shipment requirement, and production quantity when submitting the request.
What is the price of the ADV7281WBCPZ?
The current price of the ADV7281WBCPZ is obtained through the Request a Quote form on this page. Pricing depends on order quantity, package shipment form, delivery destination, and current supply status. A quote request allows the exact order configuration and quantity to be evaluated without relying on a potentially stale unit-price figure.
What is the lead time and stock status of the ADV7281WBCPZ?
Current stock and lead time for the ADV7281WBCPZ should be confirmed through the Request a Quote form on this page. Include the required quantity, tray or reel format, date code requirement, and destination country in the request. Because the ADV7281 family is not recommended for new designs, requesting a firm supply commitment is especially important for scheduled production builds.
What are the key specifications of the ADV7281WBCPZ that engineers should know?
The key ADV7281WBCPZ specifications are 10-bit conversion, 4-times oversampling, four analog inputs, and YCrCb 4:2:2 output through an ITU-R BT.656 interface. It supports NTSC, PAL, and SECAM detection and provides P0-to-P7 digital outputs plus a line-locked clock. The physical device is a 32-lead, 5 mm by 5 mm LFCSP. These points are summarized in the Analog Devices ADV7281 Data Sheet, Rev. B.
What can replace the ADV7281WBCPZ?
The ADV7281WBCPZ-RL is the nearest documented option with the same base device identity and 32-lead LFCSP footprint, but it changes the reel shipment designation. Other ADV7281 family members, including the -M and -MA versions, use the same general package family but differ in input count and function allocation. Those variants require pin-by-pin verification rather than an assumption of drop-in compatibility.

Impormasyon ng Talumpati sa Engineering for ADV7281WBCPZ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the ADV7281WBCPZ when maintaining an existing four-input ADV7281 design and its documented 32-lead LFCSP pinout must be preserved. It is suitable for analog composite, S-Video, and component sources requiring automatic NTSC, PAL, or SECAM detection and an ITU-R BT.656 YCrCb 4:2:2 output. Do not substitute the -M or -MA versions solely because they use a related package; those parts have different analog-input and general-purpose-output allocations. The -RL ordering code is the nearest same-configuration option for reel-oriented procurement, but it is a shipment-form distinction rather than a functional upgrade. For a completely new product, compare the current Analog Devices decoder portfolio because this family is not recommended for new designs.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto
Brand Analog Devices
Package 32-lead LFCSP, 5 mm x 5 mm
Product Type SDTV analog video decoder
Conversion Resolution 10 bit
Oversampling 4 times
Analog Inputs 4 inputs
Digital Output ITU-R BT.656, YCrCb 4:2:2
Supported Standards NTSC, PAL, and SECAM
Clocking Line-locked clock output
Lifecycle Recommendation Not recommended for new designs

Pangunahing mga Pagkakaiba

  • Four-input base ADV7281 configuration (kumpara saADV7281WBCPZ-M)
  • Compact 32-lead LFCSP implementation (kumpara saADV7281WBCPZ-MA)
  • Established ITU-R BT.656 digital interface (kumpara saADV7281WBCPZ-RL)

Talaan ng Disenyo

Route the analog video inputs as short, controlled-impedance traces with continuous reference planes and minimal shared copper with switching nodes. Place input-network components close to the relevant ADV7281WBCPZ pins, and keep the eight parallel digital outputs away from the analog input region. The line-locked clock should travel alongside the associated pixel data with matched propagation delay so that downstream circuitry samples the BT.656 stream reliably.

Use the exact 32-lead LFCSP footprint and exposed-pad land pattern defined in the ADV7281 Data Sheet, Rev. B. Verify pin-one orientation against the package marking and assembly drawing rather than relying only on the board symbol. Follow the manufacturer's component placement and reflow guidance, and account for thermal-coupling and solder-wicking considerations around the exposed pad during both prototype assembly and high-volume manufacturing.

Do not treat related ADV7281WBCPZ-M, ADV7281WBCPZ-MA, or reel-designated ordering variants as automatic drop-in replacements without comparing their pin descriptions. The -M and -MA family members have different input and output counts, so some package pins serve different functions even though the package dimensions are similar. For analog signal integrity, confirm input topology, biasing, amplitude, and termination against the exact data-sheet circuit recommended for single-ended, pseudo-differential, or fully differential operation.

Treat P0-to-P7 as a synchronous parallel bus and evaluate edge quality with the intended pixel clock. Avoid unnecessary vias, maintain consistent trace lengths where practical, and provide a clean return path beneath the bus. The LLC output must be used as the timing reference for the associated pixel stream; otherwise downstream logic can develop setup, hold, or skew errors even when the decoder itself is operating correctly.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Qualified
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The base ADV7281 variant is not identified as an AEC-Q100-qualified automotive option. Other environmental and material compliance attributes require confirmation from the manufacturer or the relevant order documentation.

Data napatotohanan sa: 2026-11-10 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

ADV7281WBCPZ ADV7281WBCPZ datasheet ADV7281WBCPZ datasheet pdf ADV7281WBCPZ pinout ADV7281WBCPZ specifications ADV7281WBCPZ equivalent ADV7281WBCPZ replacement ADV7281WBCPZ cross reference ADV7281WBCPZ price ADV7281WBCPZ stock Analog Devices ADV7281WBCPZ ADV7281 32 LFCSP pinout ADV7281 video decoder application ADV7281WBCPZ vs ADV7281WBCPZ-M

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices ADV7281WBCPZ ADV7281WBCPZ-M ADV7281WBCPZ-MA ADV7281WBCPZ-RL ADV7282WBCPZ ADV7182WBCPZ EVAL-ADV7281MAEBZ SDTV video decoder video decoder interface IC video interface IC semiconductor analog video decoder ITU-R BT.656 YCrCb 4:2:2 NTSC PAL SECAM 4-times oversampling 10-bit conversion line-locked clock 32-lead LFCSP LFCSP package family surface-mount package RoHS REACH AEC-Q100
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ