ADV7610BBCZ-P-RL - 165 MHz HDMI Receiver | Analog Devices
MPN: ADV7610BBCZ-P-RL ✓ NakahandaADV7610BBCZ-P-RL Ulas
An HDMI receiver is an interface IC that recovers digital audio and video from an HDMI source and converts the recovered video into a parallel digital interface suitable for display or video-processing hardware. In the product hierarchy, the ADV7610BBCZ-P-RL belongs to the HDMI receiver class, interface IC category, and broader semiconductor ecosystem. Its single-input architecture simplifies source selection while providing the clocking and signal-conditioning functions required between a connector and the downstream video system.
Principal features include a 165 MHz operating clock, UXGA 60 Hz video support at 8 bits per color, integrated HDMI reception, I2C configuration, and CEC capability. The operating temperature range of −40°C to +85°C supports industrial equipment as well as consumer and professional AV products. The low-power architecture is particularly useful when the receiver operates continuously inside a display, projector, set-top box, or video-processing enclosure.
The receiver separates the physical-layer and protocol handling needed for an HDMI link from downstream pixel processing. Its 76-CSPBGA package minimizes board area, but its fine pitch and large ball count require careful PCB layout, controlled impedance routing, and assembly processes capable of handling the package geometry. The I2C register interface allows firmware to configure detection, equalization, clocking, input format, and output behavior according to the connected source.
Typical applications include HDMI input for professional video equipment, industrial display controllers, projectors, video walls, conferencing endpoints, and multimedia receivers. Its UXGA 60 Hz capability is useful when the downstream display pipeline must preserve 1920 × 1200 video at a 60 Hz refresh rate. The professional no-HDCP configuration should be selected only when protected content is not required.
When laying out the board, treat the HDMI input, reference clock, power rails, and ground-return structure as a coordinated high-speed system. Follow the pin-description table and recommended-layout guidance in the manufacturer datasheet for every ball assignment. Avoid improvising an HDMI front end from generic routing conventions, because connector launch geometry, trace impedance, return paths, and decoupling placement materially affect link margin.
This product page consolidates the manufacturer capabilities, exact package identity, interface characteristics, drop-in variants, application fit, and practical implementation considerations into an engineering-focused selection reference. Use the Request a Quote form for current commercial availability, lead time, and order handling.
Mga alternatibo na pwedeng ilagay na ADV7610BBCZ-P-RL — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
ADV7610BBCZ-RL
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
ADV7610BBCZ
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
ADV7610BBCZ-P-RL Mga Spesipikasyon
| Product Type | Single-input HDMI-capable video receiver IC |
| Maksimum na Taktiko ng Oras | 165 MHz |
| Maximum Video Resolution | UXGA at 60 Hz |
| Maximum Color Depth | 8 bits |
| HDMI Support | HDMI 1.4 |
| Control Interface | I2C |
| CEC Support | Yes, with capability discovery and control |
| Digital Audio Support | IEC 60958 |
| Hanay ng Temperature na Operasyon | −40°C to +85°C |
| Packhaging | 76-CSPBGA (6 mm × 6 mm) |
| Uri ng Pagpapasok | Surface mount |
| Power Class | Low-power receiver |
| HDCP Configuration | Professional version without HDCP |
| Input Architecture | Single HDMI input |
| 3D Format Support | Mandatory 3D TV formats defined by HDMI |
| Ordering Code | ADV7610BBCZ-P-RL |
| Standard Reel Quantity | 2500 units |
Gabay sa Pin Configuration ng ADV7610BBCZ-P-RL 76-cspbga (6 mm × 6 mm)
Pin configuration para sa ADV7610BBCZ-P-RL (76-cspbga (6 mm × 6 mm) package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa ADV7610BBCZ-P-RL.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
ADV7610BBCZ-P-RL ay nararapat para sa 6 aplikasyons: Industrial Display Controller, Professional AV Receiver, Video Wall Controller, Projector HDMI Input, Conference Room Endpoint, Digital Audio and Video Processor.
Industrial Display Controller
The ADV7610BBCZ-P-RL suits industrial display controllers that must accept an HDMI source and deliver predictable UXGA-class video to a downstream panel interface. Its receiver clock reaches 165 MHz, while supported formats extend to UXGA at 60 Hz with 8-bit color. The I2C interface allows the host processor to configure input detection and operating registers, and the integrated CEC controller can support capability discovery between connected devices. Because the professional version does not include HDCP, it is appropriate for security-sensitive industrial displays that intentionally handle unprotected content. The principal engineering constraint is the 76-CSPBGA footprint, which requires controlled impedance routing, dense assembly capability, and careful power and ground-plane design.
Inirekomenda
Professional AV Receiver
ADV7610BBCZ-P-RL provides the HDMI input stage for professional AV equipment that must recover digital video and support control functions within one compact receiver. Its 165 MHz maximum clock covers UXGA at 60 Hz at 8-bit color, matching many presentation, monitoring, and production-display workflows. The integrated CEC controller with capability discovery and control improves interoperability with displays and other CEC-compatible equipment, while I2C register access gives the system controller a standard configuration path. IEC 60958 digital-audio support also allows the device to participate in digital audio transport. The no-HDCP professional configuration makes it suitable for equipment designed to exclude protected-source decryption rather than for general consumer playback equipment.
Inirekomenda
Video Wall Controller
A multi-panel video-wall controller can use the ADV7610BBCZ-P-RL to recover one HDMI source before routing it into an FPGA- or processor-based display pipeline. The receiver supports formats up to UXGA at 60 Hz with 8-bit color, providing a defined ceiling for pixel timing and link design. I2C configuration allows the wall controller to adapt equalization and input parameters to the source, while CEC capability discovery can assist device interoperability. The 6 mm × 6 mm 76-CSPBGA package preserves board area in densely populated controller cards, but its fine ball pitch requires a manufacturing process capable of high-density inspection and reliable HDMI trace geometry.
Inirekomenda
Projector HDMI Input
The ADV7610BBCZ-P-RL is appropriate for an HDMI input section in an office, education, or installation projector when the product must accept UXGA-class sources without implementing protected-content decryption. A receiver clock of 165 MHz supports video modes up to UXGA at 60 Hz at 8-bit color, while I2C gives the projector main controller a configuration path for input detection and operating modes. Integrated CEC capability can improve control interoperability with compatible displays and source devices. In a projector, thermal and space constraints are significant, so place the receiver near the HDMI connector only when signal-integrity and connector-launch guidance permit it, and use the manufacturer reference layout as the controlling document.
Inirekomenda
Conference Room Endpoint
ADV7610BBCZ-P-RL can form the HDMI reception stage of a conference-room codec or meeting-room terminal that accepts a laptop or media-source HDMI connection. UXGA 60 Hz support at 8-bit color covers common presentation resolutions, and I2C enables system firmware to configure input behavior. The integrated CEC controller adds device-level discovery and control capability that can complement the codec's own management interface. The professional no-HDCP configuration is appropriate where the design deliberately avoids protected content rather than acting as a general-purpose consumer HDMI sink. Board-area savings from the 76-CSPBGA package are valuable in compact terminals, although assembly and signal-integrity planning remain critical.
Inirekomenda
Digital Audio and Video Processor
The ADV7610BBCZ-P-RL can serve as the source interface for digital audio-video processing equipment that receives HDMI and separates video handling from downstream processing. Its 165 MHz receiver clock and support for formats up to UXGA at 60 Hz provide a defined basis for the processor's pixel-clock design. IEC 60958 digital-audio support permits digital audio transport through the receiver architecture, while I2C configuration provides deterministic register control from the system processor. CEC capability discovery and control can assist interoperability in larger AV installations. The 76-CSPBGA footprint reduces board area, but the design must allocate enough routing space for the HDMI differential pairs, reference clock, supplies, and ground return.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for ADV7610BBCZ-P-RL — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | ADV7610BBCZ-RL | ADV7610BBCZ |
|---|---|---|---|
| Package | 76-CSPBGA (6 mm × 6 mm) | 76-CSPBGA (6 mm × 6 mm) - same | 76-CSPBGA (6 mm × 6 mm) - same |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Product Type | Single-input HDMI-capable receiver | Single-input HDMI-capable receiver | Single-input HDMI-capable receiver |
| Maximum Clock | 165 MHz | 165 MHz | 165 MHz |
| Maximum Video Format | UXGA at 60 Hz | UXGA at 60 Hz | UXGA at 60 Hz |
| Maximum Color Depth | 8 bits | 8 bits | 8 bits |
| Control Interface | I2C | I2C | I2C |
| Operating Temperature Range | −40°C to +85°C | −40°C to +85°C | −40°C to +85°C |
| HDCP Configuration | Professional version without HDCP | Industrial configuration with HDCP | Standard family configuration with HDCP |
| CEC Support | Capability discovery and control | Capability discovery and control | Capability discovery and control |
Pangunahing mga Pagkakaiba
- Professional no-HDCP configuration (kumpara saADV7610BBCZ-RL)
- Complete single-input HDMI receiver integration (kumpara saADV7610BBCZ)
- Compact 76-CSPBGA implementation (kumpara saADV7610BBCZ-RL)
Talaan ng Disenyo
Use the Analog Devices ADV7610 manufacturer reference layout as the authority for the 76-CSPBGA footprint and HDMI input routing. Keep the differential input traces impedance controlled, short, and continuously referenced by an uninterrupted ground plane. Match connector launch geometry, differential spacing, and return-path construction to the manufacturer guidance rather than relying only on nominal trace length. The fine 76-ball package also requires escape routing that does not introduce splits in the reference plane.
Place the required supply decoupling capacitors directly beside the corresponding power balls, and provide low-impedance connections between power and ground planes. Route high-current or switching-supply connections away from the HDMI receiver and clock regions where practical. Verify the power-up sequence against the manufacturer datasheet and keep analog and digital return currents controlled through a solid ground reference. Do not add bulk capacitance in place of local decoupling because package-level inductance can dominate transient performance.
The receiver supports a 165 MHz maximum clock, so clock quality and HDMI edge-rate behavior deserve careful PCB planning. Use the specified reference-clock source and layout, maintain short clock routes, and avoid routing the clock next to the differential HDMI lanes. Check source and receiver impedance requirements as a complete system. If recovery margin is inadequate, investigate connector soldering, reference-clock jitter, power noise, and return-path discontinuities before changing software equalization settings.
Do not substitute a family variant solely because the package name matches. The ADV7610BBCZ-P-RL is the professional no-HDCP configuration, while other family ordering codes can provide the industrial HDCP configuration. Confirm protected-content requirements, firmware register expectations, package ball assignments, and ordering suffix before substituting a part. Also confirm the reel quantity and termination condition through the Request a Quote form rather than inferring them from a generic family listing.
Impormasyon ng Pagsunod sa Kautusan
The manufacturer product information identifies the ADV7610 as a professional and industrial family with a −40°C to +85°C operating range. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified for this ordering code.