ATF16V8C-7JC - 7.5ns 16V8 EECMOS PLD | Microchip
MPN: ATF16V8C-7JC ✓ NakahandaATF16V8C-7JC Ulas
A programmable logic device, or PLD, is a semiconductor whose internal logic connections can be configured after manufacture. The ATF16V8C belongs to the broader hierarchy of programmable logic ICs, CPLDs, and digital logic semiconductors. Its 16V8 architecture combines 16 inputs and 8 outputs with eight configurable macrocells. The manufacturer datasheet states that the architecture emulates many 20-pin PAL devices and most 20-pin combinatorial PLDs, making it useful for consolidating several fixed-logic functions into one programmable component.
Key device features include a maximum pin-to-pin delay of 5 ns in the broader ATF16V8C family, the 7.5 ns speed grade represented by ATF16V8C-7JC, and an optional pin-controlled power-down function that can reduce total supply current below 100 µA. The device supports CMOS and TTL-compatible interfacing. Speed options extend down to 5 ns, while the ATF16V8C-7JC specifically occupies the 7 ns speed designation associated with the distributor listing.
The ATF16V8C uses a superset of generic 16R8 architectures and provides eight product terms per output through its eight macrocells. Software automatically configures the operating mode for combinational, registered, or mixed logic functions. This architecture allows each output to implement equations with multiple product terms while retaining the software-oriented design flow associated with 20-pin PAL-compatible logic.
Typical uses include industrial control-interface decoding, address and command decoding, legacy peripheral glue logic, product-term Boolean equations, and timing-sensitive control logic where a 7.5 ns device is preferable to slower general-purpose programmable logic. The electrically erasable memory allows the configuration to be reprogrammed during development or field updates without replacing the device.
The principal design consideration is voltage and timing compatibility with the existing board. The manufacturer describes industrial-range operation over 5 V ±10% and commercial-range operation over 5 V ±5%, subject to the relevant speed-grade and temperature qualification. Designers should also confirm whether pin 4 is assigned to the optional power-down function before treating it as an ordinary logic input.
This page consolidates verified manufacturer and distributor information, distinguishes verified same-package alternatives from non-drop-in package variants, and adds practical comparison and design guidance that is not presented as raw datasheet specification data.
Mga alternatibo na pwedeng ilagay na ATF16V8C-7JC — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
ATF16V8C-7JU
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
ATF16V8B-7JC
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
ATF16V8C-7JC Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | 16V8 electrically erasable programmable logic device (PLD) |
| Architecture | EECMOS |
| Configuration Memory Technology | Electrically erasable flash memory |
| Number of Macrocells | 8 macrocells |
| Input Count | 16 inputs |
| Output Count | 8 outputs |
| Product Terms per Output | 8 product terms |
| Target Propagation Delay | 7.5 ns |
| Maximum Pin-to-Pin Delay for ATF16V8C Family | 5 ns |
| Volte ng Pagbibigay | 5 V ±10% for industrial range; 5 V ±5% for commercial range |
| Power-Down Supply Current | <100 µA when pin-controlled power-down is enabled |
| Logic Compatibility | CMOS and TTL compatible |
| Packhaging | 20-pin PLCC (9x9 mm) |
| Uri ng Pagpapasok | Through-hole |
| Power Class | Standard power |
| Operating Temperature Grade | Industrial grade |
Gabay sa Pin Configuration ng ATF16V8C-7JC 20-pin plcc (9x9 mm)
Pin configuration para sa ATF16V8C-7JC (20-pin plcc (9x9 mm) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa ATF16V8C-7JC.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
ATF16V8C-7JC ay nararapat para sa 6 aplikasyons: Industrial Control-Signal Decoding, Legacy Peripheral Interface Consolidation, Product-Term Boolean Logic, Timing-Sensitive Command Decoding, Low-Power Standby Control, Prototype and Legacy-System Modernization.
Industrial Control-Signal Decoding
The ATF16V8C-7JC fits industrial control boards that decode limit switches, interlocks, selector positions, and alarm signals into internal control commands. Its eight macrocells and eight product terms per output provide substantially more Boolean flexibility than a bank of basic gates, while the 7.5 ns propagation delay supports faster control-loop qualification than a general-purpose low-speed PLD. The electrically erasable EECMOS configuration also allows firmware or production-test revisions without changing the PCB. Before deployment, verify industrial temperature coverage and 5 V ±10% operating limits from the manufacturer datasheet.
Inirekomenda
Legacy Peripheral Interface Consolidation
ATF16V8C-7JC is useful for consolidating address decode, command qualification, chip-select generation, and interface-state machines around legacy peripherals. Its 16 inputs and eight outputs allow multiple Boolean conditions to be combined without consuming an equivalent number of separate gate packages, and its PAL-compatible architecture simplifies migration from older 20-pin PLDs. The 7.5 ns device timing also leaves more margin for combinational interface paths than slower PLD grades. Engineers should verify the original peripheral's active-high or active-low conventions and recreate the JEDEC-compatible timing behavior in the PLD equations.
Inirekomenda
Product-Term Boolean Logic
The ATF16V8C-7JC is appropriate when a design consists of several multi-input Boolean functions that would otherwise require large gate counts. Each of its eight outputs receives eight product terms, allowing implementable equations to combine many inputs and feedback paths in a compact PLCC device. This is especially valuable in transitional products where a custom ASIC would be uneconomic but the logic remains too specialized for a general-purpose microcontroller. The device's electrically erasable memory supports iterative design changes, and the 7.5 ns grade provides useful timing margin for board-level interconnect and peripheral delays.
Inirekomenda
Timing-Sensitive Command Decoding
The ATF16V8C-7JC can implement registered and combinational command-decoding paths where propagation delay affects bus acceptance or control latency. With a 7.5 ns stated delay, it provides a higher timing margin than legacy 10 ns or slower PAL-compatible grades. The eight macrocells are sufficient for qualified command recognition, output strobe generation, and state-transition decoding in compact legacy systems. Because PLD propagation delay is not identical to the system setup or hold requirements, designers should build a board-level timing budget and confirm output polarity against the original schematic before release.
Inirekomenda
Low-Power Standby Control
ATF16V8C-7JC is suitable for systems that need to retain configurable logic while reducing current during an inactive state. The manufacturer datasheet states that pin 4 may be configured as the power-down pin; when enabled and driven high, total current consumption drops below 100 µA while output data and internal logic states are latched and held. This feature can preserve control state and simplify wake sequencing. The implementation must account for the pin's alternate use as a normal logic input or output, and verification should include the configured supply range and temperature range required by the finished equipment.
Inirekomenda
Prototype and Legacy-System Modernization
ATF16V8C-7JC supports modernization of equipment built around 20-pin PAL-compatible logic. The EECMOS architecture emulates many 20-pin PALs and most 20-pin combinatorial PLDs, allowing a consolidated programmable part to replace several fixed-logic devices. Electrically erasable memory is valuable when a machine must be updated without replacing the assembled board, while the 7.5 ns speed grade can improve timing headroom over older slow PAL devices. Migration still requires a pin-by-pin comparison, logic equation conversion, and verification of power-up, power-down, and output-polarity behavior.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for ATF16V8C-7JC — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | ATF16V8C-7JU | ATF16V8B-7JC |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-PLCC (9x9) | 20-PLCC (9x9) - same package | 20-PLCC (9x9) - same package family |
| Device Type | 16V8 EECMOS programmable logic device | 16V8 ATF16V8C-family programmable logic device | ATF16V8B-family programmable logic device |
| Macrocells | 8 macrocells | 8 macrocells | 8 macrocells |
| Propagation Delay | 7.5 ns | 7.5 ns | 7 ns |
| Architecture | EECMOS with electrically erasable flash memory | ATF16V8C EECMOS family | ATF16V8B architecture |
| Input/Output Organization | 16 inputs and 8 outputs | 16V8 organization | 16V8 organization |
| Power Class | Standard power | Standard power | Standard power |
Pangunahing mga Pagkakaiba
- Direct 7.5 ns replacement candidate in the same PLCC footprint (kumpara saATF16V8C-7JU)
- EECMOS configuration and programmable power-down (kumpara saATF16V8B-7JC)
- PAL-compatible logic consolidation (kumpara saATF16V8C-7XC)
Talaan ng Disenyo
Do not treat every 20-pin PAL as a drop-in match for the ATF16V8C-7JC. The manufacturer describes the ATF16V8C architecture as a superset of generic 16R8 architectures that can emulate many 20-pin PALs, but output polarity, feedback assignments, pin 4 power-down use, and timing must still be compared. Convert the original equations, reproduce registered or combinational behavior, and verify every output state before substituting the device.
Use the manufacturer family limits of 5 V ±10% for industrial-range parts and 5 V ±5% for commercial-range parts when designing the supply rail. If pin-controlled power-down is required, reserve pin 4 for that function and drive it to the documented inactive state. The resulting current can fall below 100 µA, but outputs remain latched, so software and hardware must not assume that internal combinational activity continues while the device is powered down.
Keep the 20-PLCC footprint unchanged when sourcing ATF16V8C-7JU or evaluating ATF16V8B-7JC, and verify the exact pin numbering against the manufacturer package drawing. Do not substitute ATF16V8C-7XC on the existing board because its verified package is 20-TSSOP. A TSSOP-to-PLCC migration requires a new PCB footprint, different assembly method, and complete signal-integrity review.
Timing validation must include external setup, hold, propagation, and board-delay requirements rather than relying on the 7.5 ns device rating alone. The ATF16V8C-7JC is intended for faster legacy logic than a 10 ns-class PAL, but it is not a substitute for a full timing closure process. Simulate worst-case equations, include peripheral delays, and test output polarity and registered-mode transitions across the intended supply and temperature ranges.
Impormasyon ng Pagsunod sa Kautusan
The supplied verified sources do not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is marked not applicable because this is a programmable logic IC rather than an automotive-qualified device in the supplied data.
