ATMEGA162V-1AC - 16KB Flash AVR 8-Bit MCU | Microchip
MPN: ATMEGA162V-1AC ✓ NakahandaATMEGA162V-1AC Ulas
An 8-bit microcontroller is a complete computing system on a single chip, integrating a processor core, program memory, data memory, and peripherals such as timers, serial interfaces, and general-purpose I/O. Within the power-management hierarchy of embedded design, MCUs like the ATmega162 occupy the mid-range AVR ATmega family, sitting above small AVR (ATtiny) parts and below the ATmega128-class devices.
Key features include the advanced AVR RISC architecture with 32 general-purpose working registers, an on-chip JTAG interface for boundary-scan and on-chip debugging, dual USARTs, an SPI interface, and an external bus interface (EBI/EMI) supporting up to 64KB of external memory. The JTAG debugger and dual UART connectivity make this part especially productive in systems that require both debuggability and multiple serial links.
Architecturally, the ATmega162 uses a Harvard-structure pipeline in which program and data memories are accessed separately, allowing most instructions to complete in one clock cycle. The enhanced RISC core pairs with in-system programmable Flash, enabling firmware updates on the assembled board through the SPI or JTAG port without removing the device.
Typical applications include industrial control panels, dual-communication-node embedded controllers, and legacy AVR board designs. The external memory interface suits data-logging systems, while the dual USARTs fit multi-drop serial networks and modem-linked devices.
A key design consideration is clock selection: the V-graded device supports lower supply operation, and the -1 speed grade constrains maximum clock frequency, so verify operating frequency against the actual supply voltage used.
This page adds distributor availability data, drop-in variant comparisons, pricing tiers, and practical design notes not found in the manufacturer datasheet.
Mga alternatibo na pwedeng ilagay na ATMEGA162V-1AC — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok ATMEGA162V-1AC (parehas na form factor at footprint) — pagkakaiba sa Core Architecture, Package, JTAG Interface, Max Clock Frequency, Operating Voltage Range.
ATMEGA162-16AU
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →ATMEGA162V-8AU
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →ATMEGA162L-8AU
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
ATMEGA162V-1AC Mga Pinakamataas na Rating at Electrical Characteristics
| Core Architecture | 8-bit AVR RISC |
| Width ng Data Bus | 8 Bit |
| Program Memory Size | 16KB (8K x 16) Flash |
| SRAM Size | 1KB |
| EEPROM Size | 512B |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Max Clock Frequency | 8 MHz |
| Instruction Set | 133 instructions, mostly single-cycle |
| Interfaces | EBI/EMI, SPI, UART/USART (dual), JTAG |
| On-Chip Debug | JTAG interface |
| Package Type | 44-TQFP (10x10 mm) |
| Uri ng Pagpapasok | Surface Mount |
| Terminal Form | Gull Wing |
| Temperature Grade | Commercial |
| Lifecycle Stage | Active |
| Program Memory Type | In-System Programmable Flash |
| Throughput | Up to 1 MIPS per MHz |
Gabay sa Pin Configuration ng ATMEGA162V-1AC 44-tqfp (10x10 mm)
Pin configuration para sa ATMEGA162V-1AC (44-tqfp (10x10 mm) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa ATMEGA162V-1AC.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
ATMEGA162V-1AC ay nararapat para sa 6 aplikasyons: Industrial Control Panels, Dual-Serial Communication Nodes, External Memory Data Loggers, Legacy ATmega161 Board Replacements, SPI-Based Peripheral Control, Embedded Instrumentation with JTAG Debug.
Industrial Control Panels
The ATMEGA162V-1AC fits industrial control panels where a rugged 8-bit controller must manage relays, keypads, and status indicators while tolerating wide supply variation. Its 2.7V to 5.5V operating range absorbs rail sag from long wiring runs, and the 16KB Flash holds ladder-style control firmware comfortably. The external bus interface can extend memory for recipe tables, and commercial temperature grading matches typical panel environments. With 1KB SRAM and 512B EEPROM, setpoints persist across power cycles without external nonvolatile devices, simplifying the bill of materials in cost-sensitive panel designs.
Inirekomenda
Dual-Serial Communication Nodes
The ATMEGA162V-1AC is one of the few mid-range AVR parts with dual USARTs, making it a natural bridge node between two serial networks - for example a field bus on one UART and a modem or host link on the other. Per the Atmel datasheet, each USART supports synchronous and asynchronous modes with dedicated XCK pins, enabling flexible clocking. The 44-TQFP package provides enough I/O for flow-control and status lines. Its JTAG interface shortens firmware development for protocol stacks that must be iterated frequently during commissioning.
Inirekomenda
External Memory Data Loggers
For data-logging systems that outgrow on-chip RAM, the ATMEGA162V-1AC provides an external bus interface (EBI/EMI) that addresses additional memory devices through its AD0-AD7 and A8-A15 multiplexed ports with ALE, RD, and WR strobes. According to the Atmel datasheet, up to 64KB of external memory is supported, giving ample buffer space for sampled data before writes to EEPROM or serial Flash. The 16KB internal Flash stores acquisition and compression code, while the 2.7V to 5.5V supply range suits loggers powered from batteries or scavenged supplies.
Inirekomenda
Legacy ATmega161 Board Replacements
The ATMEGA162V-1AC is the recommended replacement path for boards designed around the ATmega161. The Atmel datasheet states the ATmega162 is 100% pin-compatible with ATmega161 and can replace it on existing PCBs without rework, preserving board investment on mature industrial products. Firmware requires review because fuse-bit locations and some electrical characteristics differ between the devices, but peripheral-rich features such as the JTAG debug port and enhanced timers improve the migrated design. The V-1AC grade additionally broadens the supply window compared with older 5V-only designs.
Inirekomenda
SPI-Based Peripheral Control
The ATMEGA162V-1AC integrates an SPI interface with SS, SCK, MOSI, and MISO pins, suiting it as a master controller for ADCs, DACs, EEPROMs, and display drivers in compact instruments. Per the Atmel datasheet, SPI supports fast synchronous transfers, and the SPI port doubles as the In-System Programming interface, so the same four-wire header used for programming can service field firmware updates. Combined with the 2.7V to 5.5V supply range, the device can share a 3.3V SPI bus with modern peripheral ICs while running board logic at 5V.
Inirekomenda
Embedded Instrumentation with JTAG Debug
Bench instruments, sensor conditioners, and test fixtures benefit from the ATMEGA162V-1AC's on-chip JTAG interface, which per the Microchip product page enables on-chip debugging and boundary-scan testing through a single connector. Developers can single-step firmware, watch registers, and reprogram the 16KB Flash without socketed parts, dramatically shortening bring-up cycles on low-volume instruments. The 8-bit AVR core delivers deterministic single-cycle execution for timing-critical measurement routines, and the 512B EEPROM stores calibration constants that survive power-off, keeping each instrument field-recalibratable.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for ATMEGA162V-1AC — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | ATMEGA162-16AU | ATMEGA162V-8AU | ATMEGA162L-8AU |
|---|---|---|---|---|
| Package | 44-TQFP (10x10 mm) | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 16KB (8K x 16) | 16KB (8K x 16) | 16KB (8K x 16) | 16KB (8K x 16) |
| SRAM | 1KB | 1KB | 1KB | 1KB |
| Supply Voltage | 2.7 V to 5.5 V | 4.5 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Max Clock Frequency | 8 MHz (V grade) | 16 MHz | 8 MHz | 8 MHz |
| JTAG On-Chip Debug | Yes | Yes | Yes | Yes |
| External Bus Interface | Yes (EBI/EMI) | Yes (EBI/EMI) | Yes (EBI/EMI) | Yes (EBI/EMI) |
Pangunahing mga Pagkakaiba
- Widest supply window in the ATmega162 family (kumpara saATMEGA162-16AU)
- Full ATmega161 replacement path (kumpara saATMEGA162-16AU)
- Lower clock ceiling limits throughput (kumpara saATMEGA162-16AU)
Talaan ng Disenyo
The ATMEGA162V-1AC accepts 2.7V to 5.5V, but AVR maximum clock frequency derates with supply voltage. The -1 speed grade further constrains frequency, and DigiKey lists the device speed as 1MHz while other sources cite the 8MHz V-grade ceiling. Verify the exact frequency-versus-voltage curve in the Atmel ATMEGA162V datasheet electrical characteristics section and set your crystal or oscillator accordingly. Decouple VCC with 0.1uF ceramic capacitors at both VCC pins plus bulk 10uF, and keep AREF clean when using the ADC-equivalent peripherals.
In the 44-TQFP layout, route the external bus interface (AD0-AD7 multiplexed bus with ALE latch) with matched lengths where possible and place the ALE latch (e.g., 74HC573) close to the MCU to minimize stubs on the shared address/data bus. Provide a 10k pull-up on RESET and expose the JTAG TCK/TMS/TDO/TDI pins (shared with port C) on a standard 2x5 header for on-chip debugging, per Atmel JTAG application guidance. Keep crystal traces under 10mm with ground guard.
When migrating from ATmega161, the Atmel datasheet warns that fuse-bit locations and some electrical characteristics differ on the ATmega162 - reprogramming with old fuse settings can lock out SPI programming. Also confirm the supply: using the standard ATMEGA162-16AU fuse/clock assumptions on this V-graded part at 3.3V can produce out-of-spec operation. Finally, the external memory interface requires enabling the XMEM fuse/configuration in software; leaving it disabled leaves the PA/PC ports as plain GPIO.
Impormasyon ng Pagsunod sa Kautusan
Compliance status was not stated in the provided verified web data; confirm RoHS/REACH status on the Microchip product page for ATMEGA162 or the distributor certificate of conformance.