ATMEGA16L-8AQ - 8MHz 16KB AVR MCU | Microchip Technology
MPN: ATMEGA16L-8AQ ✓ NakahandaATMEGA16L-8AQ Ulas
A microcontroller integrates a CPU core, memory, peripherals, and input/output interfaces into one semiconductor package. The ATMEGA16L-8AQ is an AVR RISC-based microcontroller, a category commonly used for industrial automation, embedded instruments, communication controllers, power sequencing, and compact control systems. Its 8 MHz clock rate is suitable for deterministic control loops, while the 16 KB flash memory provides room for application firmware, boot logic, and configuration tables. The 1 KB EEPROM supports nonvolatile parameter storage, and the integrated 8-channel 10-bit ADC supports analog sensor acquisition.
The principal features include an 8-bit AVR RISC core, 8 MHz maximum clock frequency, 16 KB flash memory, 1 KB EEPROM, and an integrated ADC. The device also provides USART and SPI interfaces for serial communication, multiple timer and counter resources, external interrupt capability, and programmable I/O ports. Its low-power design is useful for battery-operated and industrial systems where average power consumption matters. The industrial temperature-grade marking is consistent with deployment in equipment operating across extended environmental conditions.
The ATMEGA16L-8AQ is intended for designs that require more control and analog capability than a simple logic device but do not require the resources of a larger 32-bit MCU. Its integrated ADC simplifies sensor interfaces, while USART and SPI allow connection to host computers, transceivers, displays, and external nonvolatile memory. The 44-TQFP package provides a practical pin count for systems requiring several parallel I/O lines and dedicated peripheral connections.
Typical uses include industrial data acquisition, motor and actuator control, environmental monitoring, embedded communications, power-supply supervision, and compact automation controllers. The 8 MHz performance and 16 KB program space are appropriate for moderate control tasks, protocol handling, and periodic sensing rather than high-bandwidth signal processing.
PCB implementation should preserve the pin assignments and decoupling requirements shown in the manufacturer documentation. Place the supply bypass capacitor close to the appropriate power pin, provide adequate ground-return paths, and keep analog inputs away from switching nodes when the ADC is used. Confirm the programmed clock, fuse settings, reset circuit, and peripheral connections before production release.
This product page combines the exact ordering information, memory and interface characteristics, package details, practical application guidance, and same-footprint replacement considerations for engineers and purchasing teams.
Mga alternatibo na pwedeng ilagay na ATMEGA16L-8AQ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok ATMEGA16L-8AQ (parehas na form factor at footprint) — pagkakaiba sa Maximum Clock Frequency, Package.
ATMEGA16A-AU
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →ATMEGA16L-8AU
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
ATMEGA16L-8AUR
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
ATMEGA16L-8PJ
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
ATMEGA16L-8AU
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
ATMEGA16L-8AQ Mga Pinakamataas na Rating at Electrical Characteristics
| Microcontroller Type | 8-bit AVR RISC microcontroller |
| Maksimum na Taktiko ng Oras | 8 MHz |
| Flash Memory | 16 KB |
| Flash Organization | 8K x 16 |
| EEPROM Memory | 1 KB |
| ADC Resolution | 10 bit |
| ADC Channels | 8 channels |
| Supply Voltage Range | 3 V to 8 MHz operating specification |
| Operating Temperature Grade | Industrial |
| Packhaging | 44-TQFP (10 mm x 10 mm) |
| Terminal Count | 44 pins |
| Package Shape | Square |
| Style ng Pagpapasok | Surface mount |
| Serial Interface | USART and SPI |
| Architecture | AVR RISC |
| Programming | In-system programmable |
Gabay sa Pin Configuration ng ATMEGA16L-8AQ square
Pin configuration para sa ATMEGA16L-8AQ (square package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa ATMEGA16L-8AQ.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
ATMEGA16L-8AQ ay nararapat para sa 6 aplikasyons: Industrial Sensor Acquisition, Motor and Actuator Control, Embedded Communications Controller, Environmental Monitoring, Power Supply Supervision, Educational AVR Development.
Industrial Sensor Acquisition
The ATMEGA16L-8AQ fits industrial sensor-acquisition systems because its integrated 8-channel, 10-bit ADC can monitor multiple analog inputs while the 8 MHz AVR core handles sampling control, filtering, and data organization. The 16 KB flash memory supports compact firmware for calibration, threshold management, and digital filtering, while the 1 KB EEPROM retains configuration values across power cycles. USART or SPI can transfer measurements to a supervisory controller. Keep analog traces away from switching nodes and provide a clean reference arrangement according to the manufacturer’s pin and layout guidance.
Inirekomenda
Motor and Actuator Control
The ATMEGA16L-8AQ is appropriate for compact motor and actuator controllers that require deterministic timing, multiple digital I/O lines, and an integrated ADC. Timers and counters can manage PWM or periodic control functions, while the 8 MHz clock supports responsive control-loop execution. The 44-TQFP package exposes enough pins for control signals, position feedback, and status indication. Designers should confirm the device’s timer channels and I/O assignments in the pin-description table and account for switching-node noise when analog feedback is also present.
Inirekomenda
Embedded Communications Controller
ATMEGA16L-8AQ can serve as the control element in embedded communications equipment because it combines a USART, SPI interface, timers, and 16 KB of programmable flash in one compact package. These resources support protocol handling, status monitoring, configuration, and host communication without a separate processor. Its 8 MHz operating rate is suitable for moderate baud rates and lightweight frame processing. Validate timing margins, interrupt priorities, and peripheral multiplexing against the application’s communication protocol before production release.
Inirekomenda
Environmental Monitoring
The ATMEGA16L-8AQ is well suited to environmental monitoring equipment that combines analog sensor measurement with periodic reporting. The 8-channel, 10-bit ADC can sample temperature, humidity, light, or gas-sensor outputs, while EEPROM can preserve calibration offsets and configuration records. Its low-power AVR design helps support duty-cycled field operation, and USART provides a straightforward path to a local controller or data logger. Select external sensor interfaces and filtering networks carefully, and verify the ADC reference arrangement for the required measurement accuracy.
Inirekomenda
Power Supply Supervision
ATMEGA16L-8AQ can coordinate power-supply supervision, sequencing, and fault reporting in industrial or embedded equipment. Its ADC channels can monitor analog supply or status signals, while timers and interrupt inputs support deterministic monitoring functions. The 1 KB EEPROM can retain configuration and operating counters, and the 16 KB flash is sufficient for compact supervisory logic. Firmware should include startup delays, debounce treatment, and clear fault-latching behavior. Use the manufacturer’s power and ground pin requirements to avoid incorrect decoupling or signal coupling.
Inirekomenda
Educational AVR Development
The ATMEGA16L-8AQ is useful for educational AVR development platforms because it exposes the core peripherals of an established 8-bit AVR architecture in a 44-TQFP package. Learners can practice timer-based control, USART communication, SPI peripheral interfacing, ADC acquisition, EEPROM storage, and interrupt-driven firmware. The 8 MHz speed provides straightforward timing relationships for basic register-level examples. A development board should preserve the required reset, clock, programming, power, and decoupling connections so that examples can be transferred reliably from the evaluation environment to a custom PCB.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for ATMEGA16L-8AQ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | ATMEGA16A-AU | ATMEGA16L-8AU | ATMEGA16L-8AUR | ATMEGA16L-8PJ | ATMEGA16L-8AU |
|---|---|---|---|---|---|---|
| Package | 44-TQFP (10 mm x 10 mm) | 44-TQFP (10 mm x 10 mm) | 44-TQFP (10 mm x 10 mm) | 44-TQFP (10 mm x 10 mm) | 44-TQFP (10 mm x 10 mm) | 44-TQFP (10 mm x 10 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Architecture | 8-bit AVR RISC | 8-bit AVR RISC | 8-bit AVR RISC | 8-bit AVR RISC | 8-bit AVR RISC | 8-bit AVR RISC |
| Programming | In-system programmable | In-system programmable | In-system programmable | In-system programmable | In-system programmable | In-system programmable |
Pangunahing mga Pagkakaiba
- Documented migration path to the ATmega16A (kumpara saATMEGA16A-AU)
- Integrated multi-channel analog conversion (kumpara saATMEGA16L-8PJ)
- Compact 8 MHz AVR control platform (kumpara saATMEGA16L-8AUR)
Talaan ng Disenyo
Place the device bypass capacitor directly beside the supply and ground pins, following the manufacturer’s recommended capacitance and layout. Keep the supply return path short and provide a quiet ground reference for the ADC. Because the verified distributor specification lists a broad 3 V to 8 MHz operating specification rather than a complete regulator design, confirm the exact voltage limits and decoupling requirements in the manufacturer datasheet before release.
Use the 44-TQFP footprint from the manufacturer package drawing and preserve the pin numbering shown in the package documentation. Check all power, ground, reset, clock, programming, and peripheral pins against the schematic before releasing artwork. For mixed-signal boards, separate analog inputs from switching power paths and route analog grounds using a deliberate single-point or low-current return strategy.
The 8 MHz clock should have a short, clean route with a stable return path, and external clock or resonator connections should follow the manufacturer’s recommended circuit. Avoid long branches from the clock net and keep programming and reset traces away from high-current switching nodes. For USART and SPI links, use controlled-impedance routing where cable or board-level EMI requirements demand it.
Do not substitute an ATmega16L ordering code solely because the flash size and clock rating appear similar. Confirm the package, pin functions, temperature grade, clock fuse configuration, reset behavior, and required peripheral assignments. The ATmega16A migration documentation states that the newer device is functionally identical and drop-in compatible with the ATmega16, but some electrical characteristics differ, so those differences must still be reviewed.
Impormasyon ng Pagsunod sa Kautusan
No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was confirmed. The part is an industrial-grade microcontroller and is not identified as an automotive-qualified AEC-Q100 device.