BCM5396IFBG - 16-Port Gigabit Layer 2 Switch | Broadcom
MPN: BCM5396IFBG ✗ Tapus ng BuhayBCM5396IFBG Ulas
Mga alternatibo na pwedeng ilagay na BCM5396IFBG — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok BCM5396IFBG (parehas na form factor at footprint) — pagkakaiba sa Integrated Functions, Process Technology.
BCM5396IFB
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →BCM5396IFBGG
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
BCM5396IFBG Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | 16-port Layer 2 Gigabit Ethernet switch |
| Number of Gigabit Ethernet Ports | 16 ports |
| Integrated SerDes | Yes |
| Switch Architecture | Non-blocking switch controller |
| Integrated Functions | Packet buffer, MACs, address management, and non-blocking switch controller |
| Process Technology | 0.13 μm CMOS |
| IEEE 802.3 Compliance | Compliant |
| IEEE 802.3u Compliance | Compliant |
| IEEE 802.3ab Compliance | Compliant |
| IEEE 802.3x Compliance | Compliant |
| Flow Control | MAC control PAUSE frame support |
| Switching Layer | Layer 2 |
| Rate ng Data | Gigabit Ethernet |
| Manufacturer | Broadcom Limited |
| Tindminan RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
Gabay sa Pin Configuration ng BCM5396IFBG standard
Pin configuration para sa BCM5396IFBG (standard package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa BCM5396IFBG.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
BCM5396IFBG ay nararapat para sa 6 aplikasyons: Gigabit Ethernet Router, Industrial Ethernet Gateway, Layer 2 Network Aggregation, Network Switching Appliance, Carrier Ethernet Equipment, Telecom Access Platform.
Gigabit Ethernet Router
The BCM5396IFBG fits a multi-port Gigabit Ethernet router because it integrates 16 Layer 2 ports, MACs, address management, a packet buffer, and a non-blocking switch controller in one 0.13 μm CMOS device. Its integrated SerDes can simplify a design that otherwise needs several external switching blocks, while IEEE 802.3x PAUSE-frame support helps manage congestion toward slower endpoints. According to the manufacturer datasheet, the device also complies with IEEE 802.3, 802.3u, and 802.3ab. Before implementation, engineers must confirm the exact pinout, power rails, SerDes configuration, thermal limits, and board-termination requirements because those values are not present in the supplied verified excerpts.
Inirekomenda
Industrial Ethernet Gateway
The BCM5396IFBG is appropriate for an industrial Ethernet gateway that must consolidate numerous wired endpoints while maintaining Layer 2 switching performance. Its 16 Gigabit Ethernet ports provide high port density, and the integrated SerDes, packet buffer, MACs, address management, and non-blocking controller reduce the number of discrete network components required. IEEE 802.3x flow control is valuable when upstream devices pause traffic during congestion. The verified excerpts do not provide the BCM5396IFBG operating-temperature range or industrial qualification status, so a rugged enclosure, isolated field interfaces, surge protection, and thermal validation must be developed separately before the device is approved for industrial deployment.
Inirekomenda
Layer 2 Network Aggregation
The BCM5396IFBG is suited to Layer 2 aggregation equipment that must forward traffic among numerous Gigabit Ethernet connections without relying on multiple external switch devices. The manufacturer describes a non-blocking switch controller integrated with the packet buffer, MACs, and address management, enabling a centralized switching architecture in a single monolithic 0.13 μm CMOS device. IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, and IEEE 802.3x compliance provides a documented networking baseline. Because port speed flexibility, buffer-depth thresholds, SerDes reach, and management-register details are not supplied, engineers should treat the data sheet as mandatory for capacity planning, VLAN implementation, QoS policy, and congestion testing.
Inirekomenda
Network Switching Appliance
The BCM5396IFBG can serve as the switching heart of a dedicated network appliance because it combines 16 Gigabit Ethernet ports with integrated SerDes and a non-blocking Layer 2 controller. That integration may reduce board area and simplify high-speed routing among internal subsystems, while PAUSE-frame handling provides a mechanism for flow control during temporary congestion. The verified manufacturer description establishes the major IEEE 802.3-family compliance, but it does not include clock requirements, register definitions, package dimensions, or power consumption. A production design therefore needs schematic, PCB, thermal, firmware, and interoperability validation rather than relying on the high-level functional description alone.
Inirekomenda
Carrier Ethernet Equipment
The BCM5396IFBG is relevant to carrier-oriented Ethernet equipment because it provides 16 Gigabit Ethernet ports with integrated SerDes and supports the IEEE 802.3 family, including IEEE 802.3x flow control. These capabilities fit access aggregation, service-edge, and traffic-concentration platforms where multiple subscriber or uplink connections must be switched through one highly integrated device. The supplied sources do not establish carrier-temperature grade, redundancy features, synchronization support, or exact queueing behavior, so compliance with carrier deployment requirements must be verified separately. The design should also verify IEEE 802.3x pause behavior, SerDes configuration options, and buffer utilization under worst-case traffic patterns.
Inirekomenda
Telecom Access Platform
The BCM5396IFBG may be used in a telecom access platform requiring a concentrated set of Gigabit Ethernet interfaces and Layer 2 switching. Its integrated SerDes, 16-port configuration, address management, and non-blocking controller can support internal traffic aggregation, while IEEE 802.3x PAUSE-frame support provides congestion control for linked equipment. The documented 0.13 μm CMOS construction identifies the process generation but does not establish modern power efficiency or performance at the system level. Because no verified supply-voltage, thermal, package, or lifecycle information was supplied, engineers must confirm device qualification, operating-temperature limits, electrical timing, clocking, and thermal performance before selecting it for access equipment.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for BCM5396IFBG — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | BCM5396IFB | BCM5396IFBGG |
|---|---|---|---|
| Brand | Broadcom | Broadcom | Broadcom |
| Product Type | 16-port Layer 2 Gigabit Ethernet switch with integrated SerDes | Related BCM5396 family variant; detailed attributes not provided | Related BCM5396 family variant; detailed attributes not provided |
Pangunahing mga Pagkakaiba
- Sixteen Gigabit Ethernet ports in one switch device (kumpara saBCM5396IFB)
- Integrated packet-buffer, MAC, address-management, and switching functions (kumpara saBCM5396IFBGG)
- Documented IEEE 802.3-family compliance (kumpara saBCM5396IFB)
Talaan ng Disenyo
Do not begin power-rail design from the switch's Gigabit Ethernet port count because the actual current depends on SerDes activity, process technology, and operating mode. The verified data supplies no voltage range or dissipation figures, so obtain the manufacturer electrical characteristics and model every rail for maximum traffic. Decouple each documented supply independently and validate return-current paths under simultaneous transmit activity.
Treat the integrated SerDes interfaces as high-speed differential links and follow the complete Broadcom layout, reference-plane, via, and termination guidance. The supplied excerpts do not specify the package or SerDes reach, so no trace geometry can be inferred safely. Keep power and ground planes continuous, control impedance on every layer transition, and confirm connector, magnetics, and isolation requirements against the selected reference design.
Do not approve BCM5396IFB or BCM5396IFBGG as drop-in substitutes merely because they share the BCM5396 family name. The verified cross-reference results do not establish package, pinout, electrical, or temperature equivalence, and switch replacement may also require register-map and firmware compatibility. Obtain the complete ordering guide and data sheets and conduct a formal board-level substitution review before changing the BOM.
Estimate dissipation only after obtaining the supply voltage, active-current, and junction-temperature limits from the manufacturer data sheet. The documented 0.13 μm CMOS process identifies the technology generation but does not provide a usable thermal design value. Use the package thermal information with the actual PCB copper and airflow, and verify junction temperature under maximum port and SerDes activity rather than at idle.
IEEE 802.3x PAUSE-frame support is not a substitute for end-to-end congestion control. Validate pause thresholds, buffer behavior, and interoperability with linked equipment under sustained traffic. A device that pauses too aggressively can create head-of-line blocking, while a device that waits too long may overflow internal buffers; the complete data sheet and traffic tests are required.
Impormasyon ng Pagsunod sa Kautusan
The verified excerpts do not state material-compliance claims. Confirm current RoHS, REACH, lead-free, halogen-free, and conflict-minerals status with Broadcom or the authorized distributor documentation.
