BCM5464SA1IRB - Quad-Port Gigabit Ethernet Transceiver | Broadcom
MPN: BCM5464SA1IRB ✓ NakahandaBCM5464SA1IRB Ulas
A Gigabit Ethernet transceiver is a physical-layer interface device that converts between digital data and electrical signaling on twisted-pair copper cables. Within the network hierarchy, BCM5464SA1IRB sits below the network interface controller and above the Ethernet physical layer. Its four-port configuration is particularly useful in switches, routers, industrial gateways, access equipment, and embedded systems that need multiple 1GbE endpoints while controlling board area and component count.
The primary documented feature is support for 10, 100, and 1000BASE-T operation across four ports. This compatibility allows a system to accommodate legacy 10 Mb/s and 100 Mb/s equipment as well as Gigabit Ethernet links. The 354-ball BGA arrangement supports compact, high-density integration, but its fine pitch and high terminal count require careful PCB layout, uninterrupted reference planes, and assembly processes capable of handling the package.
The BCM5464SA1IRB combines four Ethernet physical channels in one package, reducing the number of discrete network-interface devices required in a multiport design. Compared with a system using four single-port transceivers, this consolidation can simplify enclosure design, reduce board area, and centralize thermal and power-supply considerations. The trade-off is a more demanding BGA layout and a device whose internal thermal and channel performance must be assessed across all four active ports.
Typical applications include multiport industrial Ethernet equipment, network access points, embedded gateways, printer and scanner interfaces, video-convergence products, and compact Ethernet switches. In each case, the device can serve as the copper-facing physical-layer element while a separate Ethernet MAC or switching controller handles packet processing. Board designers should preserve the high-speed differential routing geometry required by 1000BASE-T channels and provide the decoupling and thermal conditions required by the manufacturer documentation.
Layout is the principal implementation consideration for this device. Place the BGA on a multilayer PCB with a continuous reference plane beneath the device, route all differential pairs as controlled-impedance nets, and avoid stubs or test-point structures that create discontinuities. Follow the manufacturer’s reference layout, ball assignments, and layer-stack guidance exactly. Validate the completed design for insertion loss, return loss, crosstalk, and radiated emissions.
This product record combines the available Broadcom identification, Ethernet capability, package information, drop-in replacement assessment, and practical PCB guidance. It also distinguishes confirmed drop-in interchangeability from merely similar Gigabit Ethernet transceivers, helping engineers avoid selecting a device that requires a different footprint or fails an existing design rule.
Mga alternatibo na pwedeng ilagay na BCM5464SA1IRB — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Wala ng magagamit na drop-in alternatibo para sa produkto na ito.
Hilingin ang AlternatiboBCM5464SA1IRB Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | Quad-port Gigabit Ethernet transceiver |
| Ethernet Support | 10/100/1000BASE-T |
| Number of Ports | 4 ports |
| Maximum Data Rate | 1000 Mb/s per port |
| Package Type | BGA |
| Package Terminal Count | 354 terminals |
| Package Shape | Rectangular |
| Terminal Form | Ball |
| Interface Function | Ethernet transceiver, driver, and receiver |
| Number of Functions | 1 function |
| Uri ng Pagpapasok | Surface mount |
Gabay sa Pin Configuration ng BCM5464SA1IRB rectangular
Pin configuration para sa BCM5464SA1IRB (rectangular package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa BCM5464SA1IRB.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
BCM5464SA1IRB ay nararapat para sa 6 aplikasyons: Industrial Multiport Ethernet Gateway, Compact Ethernet Access Switch, Networked Printer and Scanner Platform, Video Surveillance Gateway, Embedded Network Appliance, Telecommunications Access Equipment.
Industrial Multiport Ethernet Gateway
The BCM5464SA1IRB fits an industrial gateway that must expose four 10/100/1000BASE-T copper ports while maintaining a compact system footprint. Each channel can support 1 Gb/s operation as well as 100 Mb/s and 10 Mb/s links, allowing the same controller platform to serve modern Ethernet equipment and legacy devices. The four-channel integration can reduce package count compared with four single-port transceivers. Its main implementation burden is the 354-terminal BGA, which requires a multilayer PCB, controlled-impedance differential routing, and careful power-delivery design. Confirm the industrial temperature range and qualification status against the manufacturer datasheet before release.
Inirekomenda
Compact Ethernet Access Switch
The Broadcom BCM5464SA1IRB is appropriate for an access switch or network endpoint requiring four 10/100/1000BASE-T interfaces. Supporting all three Ethernet speeds lets one physical-layer design accommodate Gigabit traffic and slower legacy devices. Integrating four channels into one package can simplify enclosure planning and reduce the number of copper PHY devices, although a separate switch or MAC controller remains necessary for frame processing. The design must preserve all 1000BASE-T differential pairs with matched impedance and adequate return loss. Four simultaneous 1 Gb/s links also make power and thermal performance across the complete package important rather than evaluating only one isolated channel.
Inirekomenda
Networked Printer and Scanner Platform
BCM5464SA1IRB can support multiple Ethernet connections in a networked printer, scanner, or multifunction office device. Four ports allow service access, management, production traffic, and legacy equipment to coexist through one physical-layer device rather than requiring separate copper-interface components. The 10/100/1000BASE-T compatibility is useful during installations that mix Gigabit workstations with 100 Mb/s infrastructure. Since the package has 354 terminals, the PCB must provide dense BGA escape routing without disturbing other high-speed signals. Firmware, connector magnetics, and copper auto-negotiation must be validated together because physical-link behavior determines whether the intended 10, 100, or 1000 Mb/s mode is established.
Inirekomenda
Video Surveillance Gateway
The BCM5464SA1IRB can provide four Ethernet links in a surveillance gateway that aggregates cameras and other edge devices before forwarding traffic. A 1 Gb/s-per-port capability is appropriate for high-resolution camera streams and local storage traffic, while 100 Mb/s and 10 Mb/s support remains useful for lower-bandwidth sensors. The four-port Broadcom transceiver can also reduce the number of separate network-interface packages compared with a one-PHY-per-camera arrangement. For a compact installation, verify the enclosure heat load with all four channels active. The PCB layout should follow the manufacturer reference stack-up, maintain continuous ground planes, and avoid coupling between adjacent differential pairs to maintain reliable 1000BASE-T operation.
Inirekomenda
Embedded Network Appliance
BCM5464SA1IRB is suitable for an embedded network appliance that connects local equipment, sensors, service technicians, and remote management services through four Ethernet ports. The shared 10/100/1000BASE-T capability supports gradual upgrades from legacy equipment to Gigabit links. Combining four physical-layer channels in one Broadcom package can simplify a dense appliance and standardize the Ethernet interface across product variants. However, the BGA package imposes higher PCB and assembly complexity than a leaded or small-outline transceiver. Plan thermal paths for four active channels, maintain uninterrupted low-impedance power distribution, and validate connector, magnetics, and auto-negotiation combinations using the manufacturer’s supported test configuration.
Inirekomenda
Telecommunications Access Equipment
The BCM5464SA1IRB can serve as the copper Ethernet physical-layer device in access equipment requiring several 10/100/1000BASE-T service ports. Four integrated channels support customer-facing or uplink connections while allowing the main processor to perform packet classification and forwarding. The part’s 354-terminal BGA footprint supports dense integration but requires a manufacturing process qualified for fine-pitch BGA assembly. Signal-integrity validation should include insertion loss, return loss, crosstalk, and radiated-emission measurements across representative port combinations. Thermal testing must cover the intended worst-case operating environment with all four links active, because total package dissipation is the sum of activity in every deployed channel rather than the power of a single isolated port.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for BCM5464SA1IRB — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto |
|---|---|
| Brand | Broadcom |
| Package | 354-terminal rectangular BGA |
| Port Count | 4 ports |
| Ethernet Speed Support | 10/100/1000BASE-T |
| Maximum Data Rate | 1000 Mb/s per port |
| Terminal Count | 354 balls |
| Mounting Type | Surface-mount BGA |
| Interface Function | Ethernet driver, receiver, and transceiver |
Pangunahing mga Pagkakaiba
- Four copper Gigabit Ethernet channels in one package (kumpara saSingle-port Ethernet transceivers)
- Broad compatibility with legacy and Gigabit Ethernet links (kumpara saGigabit-only physical-layer designs)
- High-density integration for compact multiport equipment (kumpara saLead-frame and small-outline single-port transceivers)
Talaan ng Disenyo
Use the manufacturer reference layout and stack-up for the 354-ball BGA. Each 1000BASE-T channel uses balanced differential pairs that require continuous reference planes, controlled impedance, appropriate pair spacing, and minimal vias. Avoid stubs, unnecessary test pads, and discontinuities around the BGA escape region. Complete insertion-loss, return-loss, crosstalk, and radiated-emission validation on the production stack-up.
Provide low-impedance power and ground planes with dense decoupling at the BGA supply terminals. Distribute the regulator’s transient current through multiple vias rather than relying on one connection per net. Verify the power network with the Broadcom manufacturer’s recommended capacitor arrangement and check startup, load transient, and four-port operating behavior at the system level.
Evaluate thermal performance with all four 1 Gb/s channels active because package dissipation rises as more ports operate. Provide an uninterrupted ground-reference path and use the manufacturer’s recommended PCB copper area without blocking thermal-via access. Measure junction-relevant temperature rise in the intended enclosure, including the effects of adjacent converters, magnetics, and a sealed chassis.
Do not treat a similar Broadcom Ethernet transceiver as a drop-in replacement without verifying the complete ball map, package dimensions, electrical limits, and thermal grade. BCM54220SB0IFBG and BCM54680B0KFBG are related devices but are not verified as pin-compatible substitutes for BCM5464SA1IRB. A different BGA terminal count or assignment can cause permanent board damage even when the advertised Ethernet speed is identical.
Impormasyon ng Pagsunod sa Kautusan
Compliance attributes require confirmation for the exact Broadcom order code and package suffix. The component is a wired Ethernet interface IC, so AEC-Q100 automotive qualification is not indicated by its general-purpose product category.