BQ500414Q - Automotive Qi Wireless Power Controller | Texas Instruments
MPN: BQ500414Q ✓ NakahandaBQ500414Q Ulas
What is a wireless power controller? A wireless power transmitter controller is a specialized power management IC that manages the power transfer between a transmitter and a receiver using inductive coupling. It coordinates the coil switching, modulates the power signal, and communicates with the receiver through the Qi protocol to ensure safe and efficient charging. The BQ500414Q simplifies designs by integrating the control logic, I2C interface, and LED drive outputs, reducing the external component count and system complexity.
Key features of the BQ500414Q include direct driving of three LED outputs through pins 7, 8, and 9 using a simple current-limit resistor (typically 470 ohms), which provides visual status indication without additional driver ICs. The I2C interface enables communication with host controllers, allowing system-level monitoring and configuration. The free-positioning capability of the controller supports multi-coil arrangements, enabling convenient placement of receivers on the charging surface.
The BQ500414Q is designed for automotive applications where robustness and reliability are critical. Its AEC-Q100 qualification ensures it meets stringent automotive quality standards. The device is WPC v1.1 ready, conforming to the Qi wireless charging standard for interoperability with compliant receivers. The transmitter type A6 specification defines the coil geometry and power transfer characteristics, and the controller is optimized for 12-V systems, which are common in automotive power architectures.
Typical applications include in-cabin wireless phone chargers, aftermarket charging pads, and industrial or medical devices requiring wireless power. The device's EEPROM-programmable parameters allow customization for specific system requirements, and the integrated LED drivers simplify user feedback. When designing with this controller, pay careful attention to the thermal management of the power stage and the layout of the coil driver circuitry, as these directly influence charging efficiency and EMI performance.
Mga alternatibo na pwedeng ilagay na BQ500414Q — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
BQ500414QRGZTQ1
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
BQ500414QRGZRQ1
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
BQ500414Q Mga Spesipikasyon
| Type | Wireless Power Transmitter PMIC |
| Packhaging | 48-VQFN (7x7 mm) |
| Bilang ng Pin | 48 |
| Hanay ng Temperature na Operasyon | -40°C to 85°C |
| Qualification | AEC-Q100 |
| Wireless Standard | Qi (WPC v1.1) |
| Transmitter Type | A6 |
| Volte ng Pagbibigay | 12 V (typical), other voltages supported |
| LED Outputs | 3 (pins 7, 8, 9) |
| LED Current Limit Resistor | 470 Ω (typical) |
| Interface | I2C |
| Free Positioning | Yes |
| Uri ng Pagpapasok | Surface Mount |
| Tindminan RoHS | unknown |
Gabay sa Pin Configuration ng BQ500414Q 48-vqfn (7x7 mm)
Pin configuration para sa BQ500414Q (48-vqfn (7x7 mm) package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa BQ500414Q.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
BQ500414Q ay nararapat para sa 6 aplikasyons: Automotive In-Cabin Wireless Charger, Aftermarket Wireless Charging Pad, Industrial Wireless Power Receiver Module, Smart Home Charging Station, Medical Device Wireless Power Transmitter, Portable Wireless Charging Accessory.
Automotive In-Cabin Wireless Charger
The BQ500414Q is optimized for 12-V automotive power systems and AEC-Q100 qualified, making it ideal for in-cabin wireless phone chargers. Its free-positioning capability allows the driver to place a Qi-enabled phone anywhere on the charging pad, and the three LED outputs provide charge status feedback. The I2C interface enables the host ECU to monitor and control the charging session, ensuring safe operation under varying vehicle conditions.
Inirekomenda
Aftermarket Wireless Charging Pad
For aftermarket wireless charging pads, the BQ500414Q provides a compact controller solution with minimal external components. The integrated I2C interface allows customization of charging parameters, and the device's Qi compliance ensures compatibility with a wide range of smartphones. The 48-VQFN package saves board space, and the -40°C to 85°C operating range suits both consumer and commercial installations, although automotive-grade qualifies it for harsher environments.
Inirekomenda
Industrial Wireless Power Receiver Module
The BQ500414Q can be used in industrial wireless power transmitter stations that charge sensors or tools. Its WPC v1.1 compliance ensures interoperability with receivers from various vendors, and the A6 transmitter type provides efficient power transfer. The device's I2C port enables remote monitoring of faults and charging status, while the three LED outputs can indicate operational modes. The wide temperature range supports factory environments without additional cooling.
Inirekomenda
Smart Home Charging Station
In smart home charging pads, the BQ500414Q offers a balance of simplicity and performance. The free-positioning design allows multiple devices to be charged, and the LED outputs provide intuitive status indication. The I2C interface enables integration with smart home hubs, allowing remote control and validation of charging sessions. The small VQFN package allows for a sleek, low-profile pad design, and the device's low operating temperature range covers typical indoor environments.
Inirekomenda
Medical Device Wireless Power Transmitter
For medical devices requiring wireless power, the BQ500414Q provides a robust and safe solution. Its Qi compliance ensures interop with receiver modules used in patient monitors or wearable sensors. The automotive-grade reliability and wide temperature range contribute to long service life, while the I2C interface allows system-level diagnostics. The three LED outputs can communicate charging status to caregivers, and the device's compact package helps in miniaturized medical equipment.
Inirekomenda
Portable Wireless Charging Accessory
The BQ500414Q enables portable charging accessories, such as battery-powered charging pillows or travel pads. The device's low quiescent current and efficient operation help extend battery life, while the free-positioning feature allows flexible device placement. The LED outputs provide charge indication for users. Although the controller is designed for 12V, it can operate from lower supply voltages with adjusted settings, making it suitable for USB-powered designs.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for BQ500414Q — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | BQ500414QRGZTQ1 | BQ500414QRGZRQ1 |
|---|---|---|---|
| Package | 48-VQFN (7x7) | 48-VQFN (7x7) - same | 48-VQFN (7x7) - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| AEC-Q100 Qualified | Yes | Yes | Yes |
| Operating Temperature | -40°C to 85°C | -40°C to 85°C | -40°C to 85°C |
| LED Outputs | 3 | 3 | 3 |
| I2C Interface | Yes | Yes | Yes |
| Supply Voltage | 12 V (typical) | 12 V (typical) | 12 V (typical) |
| Pin Count | 48 | 48 | 48 |
Pangunahing mga Pagkakaiba
- Automotive grade AEC-Q100 qualification (kumpara saNon-automotive wireless controllers)
- Free-positioning capability (kumpara saFixed-position controllers)
- Integrated I2C and LED drivers (kumpara saControllers requiring external communication ICs)
Talaan ng Disenyo
The BQ500414Q is optimized for 12-V supply systems. Ensure the input voltage remains within the recommended operating range to prevent malfunction. Use a robust power supply with adequate current capability for the transmitter coil driver. Consider adding a TVS diode on the supply line to protect against automotive load dumps and transients.
Even though the controller itself consumes low power, the power stage driving the coil can dissipate significant heat. Design the PCB with adequate copper pour and thermal vias under the power components. Ensure the VQFN-48 package's exposed pad is soldered to a large ground plane for effective heat spreading, especially in high-ambient automotive environments.
For EMI compliance, keep the coil driver traces short and route them with a ground plane underneath. Place decoupling capacitors close to the controller's power pins. The LED outputs on pins 7, 8, 9 can be driven with a 470-ohm series resistor; route these traces away from analog sensing areas to avoid noise coupling.
Impormasyon ng Pagsunod sa Kautusan
AEC-Q100 qualification is confirmed from TI product page. RoHS/REACH status not available in the provided data.
