CD40161BE - 4-Bit CMOS Binary Counter | Texas Instruments
MPN: CD40161BE ✓ NakahandaCD40161BE Ulas
A CMOS binary counter is a clocked sequential-logic device that advances a 4-bit numerical count on each selected clock transition. The CD40161BE belongs to the CD4000 CMOS logic family, which sits within the broader hierarchy of counters, digital logic ICs, and semiconductors. Its synchronous architecture keeps counter-state outputs coordinated with the clock, supporting repeatable digital sequencing and count-state decoding.
Principal features include a 4-bit binary count capacity, positive-edge counting, parallel loading, an enable input, and asynchronous clear. The 16-pin PDIP package supports conventional through-hole PCB assembly and is convenient for laboratory, industrial-control, educational, and legacy-system designs. The manufacturer identifies the CD40161B family as functionally equivalent and pin-compatible with the 74LS160 through 74LS163 TTL counter series.
The CD40161BE is one element of the CD40160B through CD40163B family of 4-bit synchronous programmable counters. Those devices provide related counting functions while maintaining a common CD4000-series implementation approach. Because the clear operation is asynchronous, the output state can be reset without waiting for a clock edge. This is useful in reset-dominant control logic, batch-counting systems, and safety interlocks where immediate clearing is more important than preserving synchronous timing.
Typical uses include frequency division, event counting, programmable sequence generation, digital timing, address-stepping logic, and small industrial control systems. The device can also serve as a building block for four-bit arithmetic, sampling, and state-machine functions. Designers should connect unused inputs to a defined logic level and should account for the CD4000-family supply and input limits when interfacing with modern microcontrollers or 5 V TTL systems.
For reliable operation, follow the manufacturer datasheet for supply-voltage limits, input levels, clock timing, and output-current restrictions. Decoupling close to the supply pins is recommended to limit inductive and capacitive switching noise. Because this is a through-hole PDIP device, consider socket availability, insertion cleanliness, and assembly tooling when planning production or field replacement.
This product page combines the functional description, package information, comparison criteria, drop-in replacement guidance, and practical circuit-planning considerations in one engineering-focused reference. It is intended to help engineers identify the correct counter function, confirm board compatibility, and plan supply, clock, reset, and output-interface details before schematic release.
Mga alternatibo na pwedeng ilagay na CD40161BE — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok CD40161BE (parehas na form factor at footprint) — pagkakaiba sa Mounting Type, Package.
CD40161B-MIL
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →SN74LS161AN
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
HEF40161B
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
HCF40161B
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MC140161B
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
CD40161BE Mga Pinakamataas na Rating at Electrical Characteristics
| Logic Type | CMOS synchronous programmable binary counter |
| Counter Element | 1 element |
| Counter Width | 4 bit |
| Counting Direction | Up |
| Clock Edge | Positive edge |
| Clear Type | Asynchronous |
| Type ng Output | 4-bit binary counter output |
| Programmable | Yes |
| Packhaging | 16-pin PDIP |
| Bilang ng Pin | 16 pins |
| Uri ng Pagpapasok | Through-hole |
| Tindminan RoHS | Compliant |
| Katayuan ng Lifecycle | Active |
Gabay sa Pin Configuration ng CD40161BE 16-pin pdip
Pin configuration para sa CD40161BE (16-pin pdip package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa CD40161BE.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
CD40161BE ay nararapat para sa 6 aplikasyons: Industrial Event Counting, Frequency Divider and Timing, Digital Sequence Controller, Digital Batch Counter, Address and Stepping Control, Legacy TTL Interface Bridge.
Industrial Event Counting
The CD40161BE suits industrial event-counting circuits that must count pulses from a sensor, switch, or machine actuator. Its 4-bit counter provides sixteen binary states, while the enable input can pause accumulation without resetting the count. The asynchronous clear path allows a controller to reset the count immediately when a limit, emergency stop, or batch-completion event occurs. Because counting is synchronous, the four outputs update in a coordinated sequence under clock control. Designers should use Schmitt-trigger conditioning where mechanical contacts or long wiring can produce slow edges, and should confirm the counter's operating limits against the industrial environment.
Inirekomenda
Frequency Divider and Timing
The CD40161BE can divide an incoming periodic signal into a lower-frequency or modulo-based timing signal when its four output bits are decoded. A 4-bit binary count supports frequencies down to one-quarter of the input clock, while programmable load and clear functions permit repeatable timing windows. The asynchronous clear is valuable when a fault or synchronization event must terminate the count immediately. In a divider implementation, clock-edge quality and output-transition timing determine the usable divider ratio, so the manufacturer timing diagram should guide trace routing and load assumptions.
Inirekomenda
Digital Sequence Controller
The CD40161BE can act as a compact four-step digital sequencer for relays, display multiplexing, or process-control stages. Each clock transition advances the binary count, and the four outputs can be decoded into discrete sequence steps. The enable input allows a higher-level controller to pause the sequence, while the parallel-load capability supports repeatable starting states. The asynchronous clear provides an immediate reset path that does not depend on the next clock edge. Designers should account for output rise and fall times when decoding, especially if the sequence drives relays or other slow mechanical loads.
Inirekomenda
Digital Batch Counter
The CD40161BE is useful in batch-control systems that must accumulate items, cycles, or production events. The four-bit count is sufficient for modulo-16 batches, while output decoding can trigger a packaging, dispensing, or test action at a selected count. The load input can initialize a repeatable batch, and asynchronous clear permits rapid cancellation. For reliable operation in machinery, isolate noisy motor and relay wiring from the counter and use clean clock edges. The manufacturer application guidance should be followed for input-level and maximum operating-rate requirements.
Inirekomenda
Address and Stepping Control
The CD40161BE can generate repeatable four-bit counting states for address stepping, sampling control, or test-sequence indexing. Its four binary outputs drive a small state space without requiring a microcontroller to increment every step. Parallel loading permits a sequence to begin at a selected value, and the clear input provides a deterministic restart. Because the outputs form a binary count rather than separate one-hot outputs, downstream decoding must not generate unintended transitions at rollover. Check timing margins against the load presented by address buffers, display logic, or interface devices.
Inirekomenda
Legacy TTL Interface Bridge
The CD40161BE can provide a controlled counting function in a mixed CMOS and TTL system when the interface voltage levels are carefully managed. The manufacturer identifies the CD40161B family as functionally equivalent and pin-compatible with the 74LS160-through-74LS163 TTL counter series, which simplifies mechanical replacement on compatible boards. Electrical compatibility still requires verification because CMOS input thresholds, supply levels, output drive, and timing differ from TTL. Use the active-low control conventions and avoid leaving clock, clear, load, or enable inputs floating during any changeover.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for CD40161BE — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | CD40161B | SN74LS161AN | HEF40161B | HCF40161B | MC140161B |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | NXP | STMicroelectronics | onsemi |
| Package | 16-pin PDIP | 16-pin PDIP | 16-pin PDIP | 16-pin PDIP | 16-pin PDIP | 16-pin PDIP |
| Counter Width | 4 bit | 4 bit | 4 bit | 4 bit | 4 bit | 4 bit |
| Logic Family | CMOS | CMOS | TTL | CMOS | CMOS | CMOS |
| Counting Direction | Up | Up | Up | Up | Up | Up |
| Clock Edge | Positive edge | Positive edge | Positive edge | Positive edge | Positive edge | Positive edge |
| Clear Function | Asynchronous clear | Asynchronous clear | Asynchronous clear | Asynchronous clear | Asynchronous clear | Asynchronous clear |
| Programmable Operation | Yes | Yes | Yes | Yes | Yes | Yes |
| Mounting Type | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole |
Pangunahing mga Pagkakaiba
- Combines synchronous counting with an independent asynchronous reset path (kumpara saSN74LS161AN)
- Uses the CD4000-series CMOS function family (kumpara saHEF40161B)
- Manufacturer documents compatibility with the corresponding TTL counter series (kumpara saHCF40161B)
Talaan ng Disenyo
Do not allow the clock, load, enable, clear, or count-control inputs to float. Although the CD40161B uses CMOS inputs, floating control nodes can enter an indeterminate state and cause unpredictable counting. Define every unused input at the logic level required by the manufacturer truth table, and remember that the clear input operates asynchronously and can change the outputs between clock edges.
Treat the clock as a potentially high-speed control signal even though the counter is used in low-rate industrial logic. Keep the clock route short, provide a ground reference adjacent to the source, and avoid coupling it directly to relay coils, motor windings, or long parallel bus traces. If a mechanical switch drives the clock, add appropriate debouncing and Schmitt-trigger conditioning so the counter sees clean positive edges.
Place the supply bypass capacitor close to the IC supply and ground pins, with a short, low-inductance return path. Keep the 16-pin PDIP footprint mechanically compatible with the replacement family and maintain adequate spacing around neighboring through-hole parts. For sockets, verify that the socket, PCB hole pattern, and counter orientation agree so pin 1 is not misidentified during maintenance.
Validate the complete interface before substituting a CMOS counter for a TTL counter or vice versa. The Texas Instruments CD40161B family is documented as pin-compatible with the corresponding 74LS counter series, but supply levels, input thresholds, output drive, and timing must still agree with the surrounding circuit. Use pull-up or pull-down resistors wherever an input may be disconnected during service or board rework.
Impormasyon ng Pagsunod sa Kautusan
RoHS compliance is identified for the CD40161BE product family. The other compliance attributes are not established by the cited product information.