CY7C65620-56LTXAT - USB 2.0 Hub Controller | Infineon
MPN: CY7C65620-56LTXAT ✗ Tapus ng BuhayCY7C65620-56LTXAT Ulas
A USB hub controller is a type of USB interface controller that coordinates communication between a host and attached USB devices. The USB interface controller hierarchy includes USB 2.0 controllers, peripheral controllers, host controllers, and hub controllers. Within power management and system connectivity, such devices provide port enumeration, signaling control, and coordinated access to USB Full Speed and High Speed devices.
The CY7C65620 family is identified as the EZ-USB HX2LP low-power USB 2.0 hub-controller family. Its principal documented characteristics include USB 2.0 support, Full Speed and High Speed operation, a 3.15 V to 3.45 V CMOS operating range, and a 56-QFN package measuring 8 mm by 8 mm. Tape-and-reel packaging supports automated assembly of surface-mount boards.
The exposed pad beneath the 56-QFN package provides the primary thermal and electrical land pattern for compact designs. Its 0.5 mm terminal pitch supports fine-pitch routing, but the exposed pad also requires careful PCB layout and controlled assembly procedures. The controller integrates USB hub functionality without requiring the complete host-side peripheral structure used by a general-purpose USB host controller.
Typical applications include USB-to-USB interface cards, industrial data-acquisition equipment, peripheral-sharing systems, embedded test systems, and compact computing platforms. These systems benefit when several USB peripherals must share a single upstream USB connection while retaining Full Speed or High Speed device compatibility.
PCB implementation requires close attention to the exposed-pad footprint, short USB differential traces, controlled-impedance routing, and the manufacturer's recommended decoupling arrangement. Confirm all pin assignments, supply tolerances, crystal requirements, and external component values against the manufacturer datasheet before releasing a production layout.
This product page combines the exact package and interface characteristics with practical implementation guidance, family-level alternatives, and design considerations that help engineers assess whether the CY7C65620-56LTXAT fits a low-power USB 2.0 hub design.
Mga alternatibo na pwedeng ilagay na CY7C65620-56LTXAT — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok CY7C65620-56LTXAT (parehas na form factor at footprint) — pagkakaiba sa Package Type, Operating Supply Voltage, Package, Supported USB Speeds, Temperature Grade.
CY7C65620-56LFXAT
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →CY7C65620-56LTXCT
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →CY7C65620-56LTXI
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →CY7C65620-56LTXAT
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →CY7C65620-56LFXAT
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →CY7C65620-56LTXAT Mga Spesipikasyon
| Device Type | USB 2.0 Hub Controller |
| USB Specification | USB 2.0 |
| Supported USB Speeds | Full Speed and High Speed |
| Supply Voltage Range | 3.15 V to 3.45 V |
| Process Technology | CMOS |
| Package Type | 56-QFN with Exposed Pad |
| Package Dimensions | 8 mm x 8 mm |
| Terminal Pitch | 0.5 mm |
| Total Terminal Count | 56 terminals |
| Uri ng Pagpapasok | Surface Mount |
| Package Code | HVQCCN |
| Package Shape | Square |
| Package Style | Very Thin Profile Chip Carrier with Heat Sink/Slug |
| Delivery Format | Tape and Reel |
Gabay sa Pin Configuration ng CY7C65620-56LTXAT very thin profile chip carrier with heat sink/slug
Pin configuration para sa CY7C65620-56LTXAT (very thin profile chip carrier with heat sink/slug package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa CY7C65620-56LTXAT.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
CY7C65620-56LTXAT ay nararapat para sa 6 aplikasyons: USB-to-USB Interface Card, Industrial Data-Acquisition System, Embedded Test and Measurement, Peripheral Sharing System, Industrial USB Gateway, USB Connectivity Expansion Board.
USB-to-USB Interface Card
The CY7C65620-56LTXAT fits a compact USB-to-USB interface card because it is a dedicated USB 2.0 hub controller supporting both Full Speed and High Speed operation. Its 3.15 V to 3.45 V CMOS supply range is compatible with a regulated 3.3 V rail, while the 8 mm by 8 mm 56-QFN package preserves board area. The exposed pad and 0.5 mm terminal pitch require a carefully routed footprint, but they allow the card to provide multiple downstream connections without implementing hub arbitration in a separate controller. Use the manufacturer reference circuit to establish USB data routing, clocking, supply decoupling, and exposed-pad connection.
Inirekomenda
Industrial Data-Acquisition System
The CY7C65620-56LTXAT is suitable for industrial data-acquisition equipment that connects USB instruments, sensors, or service interfaces through a multiport hub. USB 2.0 Full Speed and High Speed support allows the controller to accommodate a broader mix of legacy and higher-bandwidth USB devices than a Full-Speed-only design. The 3.15 V to 3.45 V operating range supports regulated 3.3 V system rails. Before design release, verify the exact ordering code's temperature range and qualification against the equipment enclosure temperature, condensation exposure, electromagnetic requirements, and service-life expectations.
Inirekomenda
Embedded Test and Measurement
The CY7C65620-56LTXAT can support embedded test equipment requiring several USB test points, service interfaces, or peripheral connections. Dedicated USB 2.0 hub control simplifies the relationship between one upstream host and multiple downstream devices while retaining compatibility with both Full Speed and High Speed peripherals. Its compact 8 mm by 8 mm QFN package is advantageous in densely populated instrument chassis, although the 0.5 mm pitch and exposed pad complicate automated optical inspection. Match USB trace geometry, impedance, clocking, and power distribution to the manufacturer reference design for reliable lab and production use.
Inirekomenda
Peripheral Sharing System
The CY7C65620-56LTXAT fits peripheral-sharing systems where one host connection must reach multiple USB peripherals. By using a dedicated USB 2.0 hub controller, the design can coordinate downstream port behavior without using a general-purpose embedded processor for basic hub management. Support for Full Speed and High Speed devices is useful in mixed installations containing keyboards, storage, service adapters, and other USB equipment. Confirm downstream current budgeting, power-switching details, connector protection, and USB compliance requirements in the manufacturer documentation because these application-level details must match the finished system architecture.
Inirekomenda
Industrial USB Gateway
The CY7C65620-56LTXAT can serve as the USB connectivity element in an industrial gateway that bridges service ports, local diagnostics, and external peripherals. Its Full Speed and High Speed support allows deployment with both low-rate control devices and higher-rate USB peripherals. The regulated 3.3 V supply range and compact QFN footprint support integration into compact gateways, while the exposed pad provides a defined thermal path when required by the board design. Engineers should validate the controller's exact temperature grade, USB electrical compliance, transient tolerance, and long-term availability for the target industrial lifecycle.
Inirekomenda
USB Connectivity Expansion Board
The CY7C65620-56LTXAT is appropriate for a dedicated USB connectivity expansion board designed to add downstream ports to an embedded platform. A dedicated hub controller simplifies implementation compared with a software-managed USB multiplexer, and the USB 2.0 specification supports legacy Full Speed as well as High Speed peripherals. Its 8 mm by 8 mm 56-QFN body includes an exposed pad, allowing a compact board footprint while still requiring high-density assembly capability. Follow the manufacturer layout recommendations for differential routing, reference planes, supply bypass capacitors, clock circuitry, and exposed-pad thermal vias.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for CY7C65620-56LTXAT — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | CY7C65620-56LFXAT | CY7C65620-56LTXCT | CY7C65620-56LTXI | CY7C65620-56LTXAT |
|---|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | 56-QFN (8x8) with Exposed Pad | 56-QFN (8x8) with Exposed Pad | 56-QFN (8x8) with Exposed Pad | 56-QFN (8x8) with Exposed Pad | 56-QFN (8x8) with Exposed Pad |
| Device Type | USB 2.0 Hub Controller | USB 2.0 Hub Controller | USB 2.0 Hub Controller | USB 2.0 Hub Controller | USB 2.0 Hub Controller |
| USB Specification | USB 2.0 | USB 2.0 | USB 2.0 | USB 2.0 | USB 2.0 |
| Supported USB Speeds | Full Speed and High Speed | Full Speed and High Speed | Full Speed and High Speed | Full Speed and High Speed | Full Speed and High Speed |
| Supply Voltage Range | 3.15 V to 3.45 V | 3.15 V to 3.45 V | 3.15 V to 3.45 V | 3.15 V to 3.45 V | 3.15 V to 3.45 V |
| Package Body Size | 8 mm x 8 mm | 8 mm x 8 mm | 8 mm x 8 mm | 8 mm x 8 mm | 8 mm x 8 mm |
| Terminal Pitch | 0.5 mm | 0.5 mm | 0.5 mm | 0.5 mm | 0.5 mm |
| Terminal Count | 56 terminals | 56 terminals | 56 terminals | 56 terminals | 56 terminals |
| Exposed Pad | Present | Present | Present | Present | Present |
Pangunahing mga Pagkakaiba
- Uses the same-family 56-QFN geometry across the listed ordering-code alternatives (kumpara saCY7C65620-56LFXAT)
- Supports both USB 2.0 Full Speed and High Speed operation (kumpara saCY7C65620-56LTXCT)
- Operates from the same narrow 3.3 V-class supply range as the family alternatives (kumpara saCY7C65620-56LTXI)
Talaan ng Disenyo
Create the 56-QFN footprint from the manufacturer land-pattern drawing rather than deriving it from the nominal 8 mm by 8 mm body size. Preserve the 0.5 mm terminal pitch, exposed-pad opening, solder-mask clearance, and paste-aperture design. Confirm pad numbering and exposed-pad connections against the datasheet because a geometrically similar package can still have a different land pattern.
Route USB differential pairs as controlled-impedance, tightly matched traces over a continuous reference plane. Avoid stubs, test pads without equivalent copper, and right-angle transitions. Keep the controller, crystal or clock components, and termination networks positioned according to the manufacturer reference circuit, while maintaining a short return path beneath the exposed pad.
Use the exposed pad as both a thermal and electrical connection only as directed by the manufacturer datasheet. Provide a solderable thermal land with an appropriate via pattern to distribute heat into the board. Estimated: the device's exact dissipation cannot be calculated without the operating current, supply voltage, loss profile, and ambient temperature, so apply the datasheet's thermal model rather than assuming the QFN outline alone provides sufficient cooling.
Do not treat similarly named CY7C65620 ordering codes as automatically interchangeable. Verify the ordering-information table for temperature grade, qualification, terminal finish, packaging, and exposed-pad treatment. Also confirm whether the target design needs a crystal, oscillator, or external clock source, and apply the exact recommended capacitor values and routing from the manufacturer reference circuit.
Impormasyon ng Pagsunod sa Kautusan
The LTXAT ordering code is identified as the lead-free version. Explicit RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals statements were not established.