CY8C3246AXI-140 - 50MHz PSoC 3 MCU | Infineon
MPN: CY8C3246AXI-140 ✓ NakahandaCY8C3246AXI-140 Ulas
A PSoC, or programmable system-on-chip, is a mixed-signal microcontroller architecture that integrates a CPU, programmable digital and analog peripheral blocks, memory, and configurable I/O into a single semiconductor package. In the product hierarchy, the CY8C3246 belongs to the PSoC 3 family, combines an 8051 microcontroller core with configurable peripherals, and extends beyond a conventional microcontroller into a programmable mixed-signal system-on-chip platform.
The CY8C3246 provides 64 KB of Flash program memory, 8 KB of SRAM, 62 I/O pins, a 12-bit ADC, LCD drive capability, and CAPSENSE capacitive-sensing support. Its 50 MHz operating speed provides additional instruction throughput for control loops and peripheral coordination, while the 62 I/O pins reduce the need for external I/O expanders in applications requiring multiple digital and analog connections.
The device combines an 8051 core with configurable analog and digital blocks. This architecture allows designers to allocate peripherals according to the application instead of relying exclusively on fixed hardware functions. The 100-pin package exposes substantially more I/O than smaller microcontroller packages, supporting mixed-signal boards with LCD outputs, analog sensing, communications, and general-purpose control in a compact 14 x 14 mm footprint.
Typical applications include industrial control panels, capacitive-touch user interfaces, sensor acquisition systems, programmable logic controllers, LCD-based instruments, communications equipment, and embedded consumer products. The combination of a 50 MHz core, 12-bit ADC, CAPSENSE support, and 62 I/O pins is particularly useful when a design requires local analog measurement and capacitive sensing without adding separate interface devices.
PCB implementation requires careful review of the manufacturer pin description, power-supply requirements, decoupling recommendations, and exposed analog or debug functions. Because this package provides many externally accessible pins, maintain short analog routing, use a continuous ground reference, and place required bypass capacitors close to their specified supply pins. Confirm programming, clocking, and peripheral-assignment requirements with the manufacturer documentation before releasing the PCB.
This product page combines the key memory, speed, package, and peripheral specifications with application guidance, engineering notes, and verified drop-in alternatives. It is intended to help engineers assess whether the CY8C3246AXI-140 provides the required mixed-signal integration and pin density before beginning firmware and layout work.
Mga alternatibo na pwedeng ilagay na CY8C3246AXI-140 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
CY8C3246AXI-131
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →CY8C3246AXI-140 Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | 8-bit programmable system-on-chip microcontroller |
| Product Family | PSoC 3 CY8C32xx |
| CPU Core | 8051, 8-bit |
| Maksimum na Taktiko ng Oras | 50 MHz |
| Program Memory Size | 64 KB (64K x 8) Flash |
| RAM Size | 8 KB (8K x 8) |
| Number of I/O Pins | 62 |
| ADC Resolution | 12 bit |
| Capacitive Sensing | CAPSENSE supported |
| LCD Drive | Supported |
| Oscillator Type | Internal |
| Package Type | 100-TQFP |
| Package Body Size | 14 x 14 mm |
| Terminal Count | 100 terminals |
| Package Shape | Square |
| Lead Form | Gull wing |
| Temperature Grade | Industrial |
| Uri ng Pagpapasok | Surface mount |
| Packaging | Tray |
Gabay sa Pin Configuration ng CY8C3246AXI-140 square
Pin configuration para sa CY8C3246AXI-140 (square package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa CY8C3246AXI-140.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
CY8C3246AXI-140 ay nararapat para sa 6 aplikasyons: Industrial Control Panels, Capacitive-Touch User Interfaces, LCD-Based Measurement Instruments, Sensor Acquisition Systems, Programmable Logic Controllers, Communications Equipment.
Industrial Control Panels
The CY8C3246AXI-140 fits industrial control panels that combine logic processing, sensor inputs, operator feedback, and communications. Its 50 MHz 8051 core provides control-loop throughput, while 64 KB of Flash and 8 KB of RAM support embedded application code and working data. The 62 I/O pins can connect switches, relays, indicators, displays, and field interfaces without requiring as much external I/O expansion. A 12-bit ADC supports analog process measurement, and LCD drive can simplify instrument-cluster designs. The principal engineering consideration is assigning the mixed-signal resources and validating industrial temperature requirements in the manufacturer documentation.
Inirekomenda
Capacitive-Touch User Interfaces
The CY8C3246AXI-140 supports CAPSENSE capacitive sensing and provides 62 I/O pins for combining touch controls with display, communications, and general-purpose logic. Its 50 MHz core can coordinate touch scanning, debouncing, interface updates, and application behavior, while the 8 KB RAM provides space for touch baselines and interface state. In a control panel, the MCU can scan multiple electrodes, read the 12-bit ADC, update an LCD, and transmit status over a serial interface. Reliable implementation depends on following the manufacturer sensor-routing, grounding, shielding, and calibration recommendations.
Inirekomenda
LCD-Based Measurement Instruments
The CY8C3246AXI-140 is suitable for measurement instruments that must acquire analog signals and present results on an LCD. The 12-bit ADC supports sensor and front-end measurements, while LCD drive capability reduces the need for a separate display controller in suitable panel configurations. At 50 MHz, the 8051 core can handle acquisition sequencing, calibration, display updates, and operator commands, and 8 KB of RAM can support measurement buffers and UI state. Designers should verify the supported LCD interface, panel timing, pin conflicts, and electrical levels against the device pin description before schematic capture.
Inirekomenda
Sensor Acquisition Systems
The CY8C3246AXI-140 can serve as the central controller in a multi-sensor acquisition system because it combines a 50 MHz processing core, a 12-bit ADC, and 62 I/O pins. Input channels can be sampled under firmware control, conditioned data can be stored in the 8 KB SRAM, and results can be transferred through available serial or digital peripherals. The 64 KB Flash capacity supports acquisition algorithms, calibration tables, and communications firmware. For accurate measurements, analog inputs should be routed away from fast-switching signals, reference and supply bypassing should follow the manufacturer layout guidance, and unused inputs should be handled according to the device recommendations.
Inirekomenda
Programmable Logic Controllers
The CY8C3246AXI-140 supports compact PLC and machine-control designs where an 8051 core, configurable peripherals, and 62 I/O pins are needed in one device. Its 50 MHz speed supports deterministic execution of interlocking logic, communication tasks, and input scanning, while 64 KB of Flash accommodates application code and 8 KB of RAM holds operating state. CAPSENSE can support sealed-panel controls, and the 12-bit ADC can assist with analog monitoring. Firmware scheduling should account for interrupt latency and peripheral configuration, while the PCB must provide clean routing between field inputs, communication interfaces, and power distribution.
Inirekomenda
Communications Equipment
The CY8C3246AXI-140 can be used in embedded communications equipment requiring a fast 8051 core and extensive mixed-signal integration. Its 50 MHz operating rate supports protocol processing and event-driven control, while 62 I/O pins provide connections for serial links, indicators, controls, and diagnostics. The 64 KB Flash and 8 KB RAM provide resources for firmware, packet buffers, and configuration data. For communications applications, engineers should assign clocking and peripheral blocks early, confirm the availability of required interfaces, and preserve signal integrity with controlled impedance routing and short return paths where high-speed signals are present.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for CY8C3246AXI-140 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | CY8C3246AXI-131 |
|---|---|---|
| Package | 100-TQFP (14 x 14 mm) | 100-TQFP (14 x 14 mm) |
| Brand | Infineon | Infineon |
| CPU Core | 8051, 8-bit | 8051, 8-bit |
| Program Memory | 64 KB Flash | 64 KB Flash |
| RAM | 8 KB | 8 KB |
| ADC Resolution | 12 bit | 12 bit |
| Capacitive Sensing | CAPSENSE supported | CAPSENSE supported |
| LCD Drive | Supported | Supported |
Pangunahing mga Pagkakaiba
- High processing speed within an 8051-based mixed-signal device (kumpara saCY8C3246AXI-131)
- Substantial integration for display, touch, and analog-control designs (kumpara saCY8C3246AXI-131)
- Broad I/O access for mixed embedded systems (kumpara saCY8C3246AXI-131)
Talaan ng Disenyo
Assign the 100 terminals from the manufacturer pin-description table before routing. Keep analog inputs away from switching nodes and digital signals, maintain a continuous ground reference beneath the device, and route each analog signal over a quiet ground region. Place required bypass capacitors directly at the associated supply pins and follow the manufacturer layer-stack and decoupling recommendations to preserve ADC and CAPSENSE performance.
Decouple every required supply domain at the package pins and verify voltage limits, startup behavior, and power sequencing against the manufacturer electrical-characteristics tables. Avoid routing analog and digital return currents through a common narrow path when measurable noise is present. Use the device's 12-bit ADC only after the reference, source impedance, acquisition time, and input filtering meet the accuracy required by the measurement chain.
Confirm the operating mode of every external signal during clock, programming, and normal operation. External debug or programming signals may share pins with user functions, so validate their state through reset and boot. For communication interfaces, use short routes, continuous reference planes, controlled impedance where applicable, and separation from switching-capable pins to reduce ringing, crosstalk, and false trigger risk.
Do not substitute the CY8C3246AXA-140 ordering suffix for CY8C3246AXI-140 without reviewing the manufacturer ordering table, because suffix changes can affect speed grade, temperature grade, or shipment format. Likewise, verify that CY8C3246AXI-131 retains the same peripheral assignment, clocking, package, and qualification requirements. A matching package alone does not guarantee firmware or timing compatibility.
Impormasyon ng Pagsunod sa Kautusan
The device is identified as industrial grade, but no RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was found for this exact ordering code. AEC-Q100 is not applicable because the target is an industrial microcontroller rather than an automotive-qualified ordering variant.