DG407DJ+ - Dual 8:1 CMOS Analog Multiplexer | Analog Devices
MPN: DG407DJ+ ✓ NakahandaDG407DJ+ Ulas
An analog multiplexer is a switching interface that connects one source path to one of several signal paths. The DG407 belongs to the broader analog switch and multiplexer hierarchy, where it enables one physical signal to be routed among multiple sensors, test points, amplifiers, or data-conversion channels. Its differential 8-channel configuration makes it useful when the switched signal must be balanced or when two related signals are selected together.
Key features include a maximum on-resistance of 100 ohm, guaranteed channel matching of 8 ohm maximum, and signal-range flatness of 9 ohm maximum. Charge injection is limited to 15 pC maximum, reducing the switching transient that can otherwise disturb precision measurement nodes. The on-resistance conducts equally well in either direction, while TTL- and CMOS-compatible address inputs simplify control from digital logic.
Internally, the DG407 uses an array of 16 analog switches and a digital decode circuit for channel selection. A voltage reference establishes the logic thresholds, and the enable input permits device selection when more than one multiplexer is installed. These functions allow engineers to construct larger switched-channel systems while retaining standardized digital control.
Typical applications include battery-cell measurement, automated test equipment, data acquisition, industrial process monitoring, instrumentation, and multiplexed sensor interfaces. The device is particularly appropriate when a low-frequency analog node must be routed among several inputs with controlled resistance, matching, and charge injection.
Designers should account for the 100 ohm maximum on-resistance when calculating source impedance and settling behavior. Input and ground routing should minimize parasitic resistance and coupling, while digital address and enable traces should be kept away from sensitive analog conductors. The 28-pin PDIP package also requires adequate through-hole spacing and suitable protection from mechanical or moisture exposure.
This product page combines the verified manufacturer and distributor information with package-specific selection guidance, data gaps, pricing context, and same-footprint alternatives. It distinguishes directly documented variants from candidates that require independent pin, logic-level, and absolute-maximum-rating verification before substitution.
Mga alternatibo na pwedeng ilagay na DG407DJ+ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
DG407DJ
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
DG407DY+
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
DG507AJ+
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
DG407DJ
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
DG407DJ
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
DG407DJ+ Mga Spesipikasyon
| Multiplexer Configuration | Dual 8:1 multiplexer |
| Channel Architecture | 16-channel dual 8-channel or differential 8-channel |
| Maximum On-Resistance | 100 ohm |
| Maximum On-Resistance Matching | 8 ohm |
| Maximum On-Resistance Flatness | 9 ohm |
| Maximum Charge Injection | 15 pC |
| Signal Conduction Direction | Bidirectional |
| Digital Control Compatibility | TTL- and CMOS-compatible |
| Address Decode Circuit | Internal digital channel-selection decode |
| Logic Threshold Reference | Internal voltage reference |
| Enable Function | Enable input for device selection and multiplexing |
| Packhaging | 28-pin PDIP |
| Uri ng Pagpapasok | Through-hole |
| Analog Switch Count | 16 analog switches |
Gabay sa Pin Configuration ng DG407DJ+ 28-pin pdip
Pin configuration para sa DG407DJ+ (28-pin pdip package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa DG407DJ+.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
DG407DJ+ ay nararapat para sa 6 aplikasyons: Battery-Cell Measurement, Automated Test Equipment, Data-Acquisition Systems, Industrial Process Monitoring, Precision Instrumentation, Multiplexed Sensor Interfaces.
Battery-Cell Measurement
The DG407DJ+ fits multiplexed battery-cell monitoring because its dual 8:1 arrangement can route related differential signals through a controlled switching matrix. The manufacturer documents maximum channel matching of 8 ohm, flatness of 9 ohm, and charge injection of 15 pC, all of which help limit measurement variation between sequentially selected cells. A practical implementation can place the device between cell-monitoring inputs and a shared amplifier or converter. Engineers should verify leakage, settling time, protection requirements, and common-mode limits against the cell range before assigning the multiplexer.
Inirekomenda
Automated Test Equipment
The DG407DJ+ is appropriate for automated test equipment that must connect a shared measurement channel to multiple test points. Its 16 internal analog switches, dual 8-channel organization, and enable input permit two routing banks to be selected by common digital control. The documented 100 ohm maximum on-resistance adds source impedance, while 8 ohm matching and 9 ohm flatness reduce channel-to-channel variation. Use short, shielded analog routing and provide adequate settling time so the system performance is not dominated by switch resistance or switching transients.
Inirekomenda
Data-Acquisition Systems
The DG407DJ+ can route multiple low-frequency sensor or instrumentation outputs into a shared data-acquisition front end. Its dual 8:1 structure supports compact channel expansion without requiring a separate address decoder for each bank, while the internal voltage reference establishes consistent logic thresholds. The 15 pC maximum charge injection helps limit transient error during channel changes, and 8 ohm maximum matching improves consistency across channels. Exact converter settling behavior remains application-dependent, so calculate total source impedance and acquisition time for the selected downstream ADC.
Inirekomenda
Industrial Process Monitoring
The DG407DJ+ is suitable for industrial monitoring systems that must select among multiple analog sensor nodes. Its low-frequency CMOS switching structure, bidirectional conduction, TTL- and CMOS-compatible decode, and enable input simplify integration with supervisory logic. Channel matching of 8 ohm maximum and flatness of 9 ohm maximum help preserve measurement consistency across the selected inputs. The design should include input protection appropriate for the industrial environment and should place the mux close enough to the protected sensor interface to minimize pickup on long analog traces.
Inirekomenda
Precision Instrumentation
The DG407DJ+ can improve source consistency in precision instrumentation that selects among several signal sources, including bridge, reference, or diagnostic nodes. The manufacturer guarantees no more than 8 ohm channel-to-channel matching and 9 ohm flatness, which helps when calibration assumes comparable switch paths. Charge injection is limited to 15 pC, reducing the magnitude of control pulses introduced into the switched node. For high-impedance sensors, check input leakage and capacitance in the official datasheet because those values were not present in the supplied verified snippets.
Inirekomenda
Multiplexed Sensor Interfaces
The DG407DJ+ fits interfaces combining several sensors with a shared amplifier or converter, particularly where the signals are low frequency and require matched routing. Its two 8-channel banks provide 16 analog switches, and the enable input can isolate one mux while another is selected in a larger system. The 100 ohm maximum on-resistance can become significant with high source impedance, so the acquisition chain should be designed around that added impedance. Keep control traces away from sensor inputs and use a ground reference that minimizes coupling during address transitions.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for DG407DJ+ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | DG407DJ | DG407DY+ | DG507AJ+ | DG407DJ | DG407DJ |
|---|---|---|---|---|---|---|
| Package | 28-PDIP | 28-PDIP | 28-PDIP | 28-PDIP | 28-PDIP | 28-PDIP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Vishay Intertechnology | Renesas Electronics |
Pangunahing mga Pagkakaiba
- Guaranteed matching between multiplexed channels (kumpara saDG507AJ+)
- Low maximum charge injection for analog switching (kumpara saDG507AJ+)
- Matched resistance and flatness across the selected signal range (kumpara saDG407DJ)
- Integrated enable control for multi-device expansion (kumpara saDG407DJ)
Talaan ng Disenyo
Treat the 100 ohm maximum on-resistance as part of the source impedance of every selected channel. For a high-impedance sensor, this resistance can materially reduce signal amplitude and increase settling time. Include the switch resistance, connector resistance, trace resistance, and downstream input impedance in the acquisition calculation. If the resulting attenuation or settling behavior is excessive, use a lower-on-resistance switch rather than compensating with unnecessary amplifier gain.
Route each analog signal so its switch and connector share a nearby ground reference, and keep address, enable, and other digital traces away from sensitive analog inputs. Through-hole PDIP routing provides flexibility, but long analog loops can increase coupling and susceptibility to noise. When the mux is located remotely from the source, use a low-impedance reference plane and consider guarding or shielding rather than relying on the mux's 8 ohm channel matching to correct board-level errors.
Do not treat the dual 8:1 architecture as a generic 16:1 mux without verifying the exact DG407DJ+ pin table and whether the selected channels are single-ended or differential. Also verify the enable polarity, address truth table, allowable analog voltage, and supply range from Data Sheet Rev. 6. The verified snippets identify the channel architecture and enable function but do not provide the complete pin-by-pin mapping, so relying on a generic schematic can produce wiring errors.
Decouple the DG407DJ+ supply with standard high-frequency bypass and a local bulk reservoir located close to the device pins. Because the supplied data does not specify supply current, transient current, or permitted voltage, do not infer a switching regulator or capacitor size from the 100 ohm analog on-resistance. Establish the actual supply network from the manufacturer limits and current-consumption table, then verify that address transitions do not disturb adjacent analog rails.
Impormasyon ng Pagsunod sa Kautusan
The supplied verified sources identify the family as production but do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for DG407DJ+. Compliance must be confirmed from the current manufacturer product documentation for the exact ordering code.