DSPIC33EP64MC502-E/MM - 16-bit DSC 60 MIPS 64KB Flash | Microchip
MPN: DSPIC33EP64MC502-E/MM ✓ NakahandaDSPIC33EP64MC502-E/MM Ulas
A Digital Signal Controller combines the compute capability of a microcontroller with DSP instruction acceleration in a single core. In the power-management hierarchy, the dsPIC33EP sits between general-purpose MCUs and dedicated DSPs, offering a 16-bit modified Harvard architecture with DSP multiply-accumulate instructions, making it a preferred choice for embedded control systems that require both real-time control loops and signal processing.
Key features include a 60 MIPS dsPIC33E core, high-speed Motor Control PWM (MCPWM) with complementary outputs and dead-time insertion, a Quadrature Encoder Interface (QEI) for position feedback, 4 DMA channels, and multiple serial peripherals (UART, SPI, I2C). The -E suffix denotes AEC-Q100 automotive-grade qualification with operation to +125C, per distributor parametric data.
The modified Harvard architecture supports single-cycle MAC operations with dual data fetch, enabling efficient execution of PI and PID control loops, field-oriented control (FOC) transforms, and Clarke/Park calculations for brushless DC and permanent magnet motor drives. The high-speed PWM peripherals synchronize with the ADC for precise current sampling at the PWM center.
Typical applications include brushless DC and PMSM motor control, digital power supplies, automotive pump and fan controllers, and industrial drives requiring extended temperature operation.
Design consideration: at 60 MIPS the core requires a 3.0V to 3.6V supply; ensure decoupling and consider that the QFN exposed pad must be soldered to a grounded thermal pad for reliable operation across the full -40C to +125C range.
This page synthesizes distributor pricing, drop-in alternatives, pinout data, and practical design notes not found in a single manufacturer datasheet.
Mga alternatibo na pwedeng ilagay na DSPIC33EP64MC502-E/MM — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok DSPIC33EP64MC502-E/MM (parehas na form factor at footprint) — pagkakaiba sa Package, Operating Temperature, Core Architecture, Core, Motor Control PWM.
DSPIC33EP64MC502-I/MM
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →DSPIC33EP64MC502-E/SO
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →DSPIC33EP64MC202-I/MM
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →DSPIC33EP64MC202-E/SP
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
DSPIC33EP64MC203T-I/TL
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →DSPIC33EP64MC502-E/MM Mga Pinakamataas na Rating at Electrical Characteristics
| Core Architecture | 16-bit dsPIC33E DSC |
| Maximum CPU Speed | 60 MIPS (60 MHz) |
| Program Memory (Flash) | 64 KB (22K x 24) |
| RAM | 8 KB |
| Volte ng Pagbibigay | 3 V to 3.6 V |
| Temperature na Operasyon | -40C to +125C (E, extended) |
| Packhaging | 28-QFN-S (6x6 mm) |
| Uri ng Pagpapasok | Surface Mount |
| Motor Control PWM | MCPWM (high-speed) |
| Quadrature Encoder Interface | Yes (QEI) |
| Timers | 5 timers |
| DMA Channels | 4 |
| Serial Peripherals | UART, SPI, I2C |
| In-Circuit Programming | Yes (ICSP) |
| Qualification | AEC-Q100 automotive |
| Katayuan ng Lifecycle | Active (In Production) |
| JTAG/Boundary Scan | IEEE 1149.2 compatible |
Pin Configuration ng DSPIC33EP64MC502-E/MM
| Pin 1 | MCLR — Master clear reset (active low) / programming voltage |
| Pin 2 | AN0/VREF+/CN0/RB0 — Analog input 0 / positive voltage reference / port B |
| Pin 3 | AN1/VREF-/CN1/RB1 — Analog input 1 / negative voltage reference / port B |
| Pin 4 | PGD/AN2/CN2/RB2 — ICSP data / analog input 2 / port B |
| Pin 5 | PGC/AN3/CN3/RB3 — ICSP clock / analog input 3 / port B |
| Pin 6 | AN4/CN4/RB4 — Analog input 4 / port B |
| Pin 7 | AN5/CN5/RB5 — Analog input 5 / port B |
| Pin 8 | VSS — Ground reference |
| Pin 9 | OSC1/CLKI — Oscillator crystal input / external clock input |
| Pin 10 | OSC2/CLKO/RC15 — Oscillator crystal output / clock output / port C |
| Pin 11 | VDD — Positive supply (3V to 3.6V) |
| Pin 12 | SDA/RP2/RF2 — I2C data / peripheral pin select 2 / port F |
| Pin 13 | SCL/RP3/RF3 — I2C clock / peripheral pin select 3 / port F |
| Pin 14 | VSS — Ground reference |
| Pin 15 | VDD — Positive supply (3V to 3.6V) |
| Pin 16 | RP13/RF6 — Peripheral pin select 13 / port F |
| Pin 17 | RP12/RF5 — Peripheral pin select 12 / port F |
| Pin 18 | RP11/RF4 — Peripheral pin select 11 / port F |
| Pin 19 | RP10/RF3/RD8 — Peripheral pin select 10 / general I/O |
| Pin 20 | RP9/RD9 — Peripheral pin select 9 / general I/O |
| Pin 21 | RP8/RD10 — Peripheral pin select 8 / general I/O |
| Pin 22 | RP7/RD11 — Peripheral pin select 7 / general I/O |
| Pin 23 | RP6/RD12 — Peripheral pin select 6 / general I/O |
| Pin 24 | RP5/RD13 — Peripheral pin select 5 / general I/O |
| Pin 25 | RP4/RF1 — Peripheral pin select 4 / port F |
| Pin 26 | RP1/RF1/CN15 — Peripheral pin select 1 / port F |
| Pin 27 | RP0/RF0/CN14 — Peripheral pin select 0 / port F |
| Pin 28 | VSS/EP — Ground / exposed thermal pad - solder to grounded PCB pad |
Tipikal na mga Gamit
DSPIC33EP64MC502-E/MM ay nararapat para sa 6 aplikasyons: Brushless DC Motor Control, Automotive Pump and Fan Controllers, Digital Power Conversion, Industrial Drives and Robotics, Sensor Signal Processing, Embedded Control and IoT Nodes.
Brushless DC Motor Control
The DSPIC33EP64MC502-E/MM fits BLDC and PMSM drives because its high-speed MCPWM module generates complementary PWM pairs with programmable dead-time, while the 60 MIPS core executes field-oriented control with single-cycle MAC instructions. The QEI module decodes incremental encoder feedback for closed-loop position control. Typical topology: three half-bridges driven by the MCPWM, with phase currents sampled by the internal ADC synchronized to the PWM center for ripple-free readings. The -E grade (-40C to +125C) allows mounting near hot motor windings or under-hood locations.
Inirekomenda
Automotive Pump and Fan Controllers
AEC-Q100 qualification and the extended -40C to +125C temperature range make the DSPIC33EP64MC502-E/MM appropriate for automotive auxiliary drives such as coolant pumps, radiator fans, and actuator motors. The MCPWM with fault inputs enables fast shutdown on overcurrent events, while UART/SPI/I2C provide LIN/CAN gateway connectivity via external transceivers. The 64 KB Flash accommodates diagnostic routines, failure counters, and bootloaders required in automotive software architectures. On-board DMA offloads ADC sampling from the CPU, preserving loop bandwidth at high PWM frequencies.
Inirekomenda
Digital Power Conversion
The dsPIC33EP64MC502 supports digital SMPS topologies: the MCPWM offers center-aligned complementary outputs for LLC, half-bridge, and boost converters, with ADC triggering at PWM midpoint to sample output current at minimal ripple. The 60 MIPS DSP core runs proportional-integral compensation loops at tens of kHz update rates, and DMA moves ADC results without CPU intervention. The 3.0V to 3.6V supply simplifies integration into systems with standard 3.3V logic rails, and the extended temperature grade suits power supplies operating in hot enclosures.
Inirekomenda
Industrial Drives and Robotics
In industrial servo and stepper drives, the QEI interface handles encoder feedback while MCPWM drives power stages; the 60 MIPS core performs trajectory generation and control-loop math concurrently. SPI and UART interfaces connect to supervisory PLCs, and I2C supports configuration EEPROM and sensors. The 64 KB Flash stores motion profiles and multi-axis coordination code, while 4 DMA channels keep serial data streaming deterministic. The 28-QFN 6x6 mm footprint conserves PCB area in compact drive modules operating in hot industrial cabinets.
Inirekomenda
Sensor Signal Processing
The DSP instruction set (single-cycle MAC, dual operand fetch) makes the DSPIC33EP64MC502 effective for sensor front-ends: filtering vibration data, demodulating signals, or computing RMS values in power meters. The internal ADC samples analog inputs (AN0-AN5 available on the 28-pin device), and DSP routines apply FIR/IIR filters efficiently. The -E temperature grade allows deployment in outdoor metering and HVAC sensing equipment where ambient temperatures reach +85C to +105C, while the QFN package minimizes board space in dense sensor nodes.
Inirekomenda
Embedded Control and IoT Nodes
As a general 16-bit embedded controller, the DSPIC33EP64MC502-E/MM combines MCU peripherals (UART, SPI, I2C, timers, PPS) with DSP headroom for local analytics. ECAN/UART bridges to wireless modules, SPI to flash or displays, and the peripheral pin select architecture flexibly routes functions to available pins on the 28-pin device. The extended temperature range supports outdoor and industrial IoT deployments, while in-circuit programming enables field firmware updates through the ICSP interface or a custom bootloader.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for DSPIC33EP64MC502-E/MM — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | DSPIC33EP64MC502-I/MM | DSPIC33EP64MC202-I/MM | DSPIC33EP64MC502-E/SO | DSPIC33EP64MC203T-I/TL |
|---|---|---|---|---|---|
| Package | 28-QFN-S (6x6 mm) | 28-QFN-S (6x6 mm) - same | 28-QFN-S (6x6 mm) - same | 28-SOIC | 28-QFN-S (4x4 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Speed | 60 MIPS | 60 MIPS | 60 MIPS | 60 MIPS | 60 MIPS |
| Flash Memory | 64 KB (22K x 24) | 64 KB | 32 KB | 64 KB | 18 KB |
| Operating Temperature | -40C to +125C | -40C to +85C | -40C to +85C | -40C to +125C | -40C to +85C |
| AEC-Q100 Qualification | Yes (E grade) | No (industrial) | No (industrial) | Yes (E grade) | No (industrial) |
| Motor Control PWM | MCPWM high-speed | MCPWM high-speed | MCPWM high-speed | MCPWM high-speed | MCPWM high-speed |
| Lifecycle Status | Active (In Production) | Active | Active | Active | Active |
Pangunahing mga Pagkakaiba
- Extended -40C to +125C operation with AEC-Q100 (kumpara saDSPIC33EP64MC502-I/MM)
- Full 64 KB Flash for FOC and bootloaders (kumpara saDSPIC33EP64MC202-I/MM)
- Compact 6x6 mm QFN footprint (kumpara saDSPIC33EP64MC502-E/SO)
Talaan ng Disenyo
The QFN exposed pad (EP) on pin 28 is the primary thermal and ground path. Solder it to a grounded PCB pad with a 4x4 via array (0.3 mm vias) connecting to internal ground planes. Without a solid EP connection, thermal resistance rises substantially and full -40C to +125C extended-grade operation at 60 MIPS cannot be guaranteed. Follow Microchip QFN layout guidelines in the family datasheet DS70000657J.
Supply 3.0V to 3.6V (nominal 3.3V) with 0.1 uF ceramic decoupling at each VDD pin plus 4.7-10 uF bulk. Place decoupling within 2 mm of the QFN power pins. PWM switching edges couple through the ground return; use a solid ground plane and keep analog VREF traces away from PWM pins. For automotive rails, add an LDO or buck front-end plus reverse-polarity and load-dump protection.
On 28-pin variants, peripheral pin select (PPS) routing is constrained: some pins are analog-only at power-up (AN0-AN5), and I2C pins 12-13 are fixed-function. Verify pin availability for simultaneous MCPWM, QEI, and UART use before layout - budget is tight on the MC502. Also confirm the -E grade requirement early: switching to -I/MM later saves cost only if ambient never exceeds +85C.
Impormasyon ng Pagsunod sa Kautusan
AEC-Q100 automotive qualification per datasheets.com parametric data for the -E grade. RoHS and lead-free status per standard Microchip production; confirm REACH and halogen-free status on the Microchip product page.
