DSPIC33FJ64GS608T-50I/PT - 16-bit DSC 50MIPS 64KB | Microchip
MPN: DSPIC33FJ64GS608T-50I/PT ✓ NakahandaDSPIC33FJ64GS608T-50I/PT Ulas
A digital signal controller combines the compute throughput of a DSP with the peripheral integration and control-friendly architecture of a microcontroller. Within the power-management hierarchy, the dsPIC33FJ GS family sits above generic MCUs for digital power tasks: its instruction set supports fast PID and compensator loops, while dedicated high-speed PWM hardware closes control loops without CPU intervention. This makes DSCs the de-facto standard for digitally controlled switch-mode power supplies and power factor correction stages.
Key features include dedicated high-speed PWM peripherals with complementary outputs, dead-time control and fault protection tailored for SMPS topologies; on-chip high-speed ADC modules synchronized to the PWM for cycle-by-cycle sampling; multiple analog comparators for overcurrent and overvoltage protection; CAN for industrial communication; DAC channels and QEI inputs for motion-oriented power conversion. The 50 MIPS core executes one instruction per cycle, allowing multi-loop control schemes in a single device.
Architecturally, the device uses a modified Harvard 16-bit core with DSP multiply-accumulate instructions, separate program and data buses, and hardware looping. The Flash-based program memory supports in-circuit self-programming, and the supply range of 3.0V to 3.6V matches standard 3.3V rails. According to Microchip product documentation, the family explicitly targets AC to DC converters, DC to DC converters, power factor correction, and uninterruptible power supplies.
Typical applications include digitally controlled AC-DC power supplies, interleaved PFC front ends, DC-DC converters, UPS systems, solar inverters, battery chargers, and LED drivers, where the PWM-ADC-comparator pipeline handles fast current-mode control while the CPU executes slower voltage and system loops.
Design consideration: keep the 3.3V supply within the 3.0V to 3.6V window, decouple all VDD/VDDCORE pins with low-ESR ceramics close to the TQFP, and route PWM outputs away from analog ADC inputs to preserve conversion accuracy.
This page synthesizes distributor pricing, drop-in alternatives, design notes, and comparison data not found on the manufacturer product page alone.
Mga alternatibo na pwedeng ilagay na DSPIC33FJ64GS608T-50I/PT — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok DSPIC33FJ64GS608T-50I/PT (parehas na form factor at footprint) — pagkakaiba sa Package, Operating Temperature, ADC, Program Memory (Flash), CAN.
DSPIC33FJ64GS608-50I/PT
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →DSPIC33FJ128GS608-50I/PT
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
DSPIC33FJ32GS608-50I/PT
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →DSPIC33FJ64GS608T-E/PT
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
DSPIC33FJ64GP708A-I/PT
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →DSPIC33FJ64GS608T-50I/PT Mga Pinakamataas na Rating at Electrical Characteristics
| Core | dsPIC33F 16-bit DSC core |
| Max CPU Speed | 50 MIPS |
| Program Memory (Flash) | 64 KB |
| RAM | 9 KB |
| Volte ng Pagbibigay | 3 V to 3.6 V |
| Temperature na Operasyon | -40C to +85C (I grade) |
| Packhaging | 80-pin TQFP (PT) |
| Uri ng Pagpapasok | Surface Mount |
| High-Speed PWM | Yes (SMPS-dedicated, complementary outputs, dead-time control) |
| Analog Comparators | 4 |
| DAC Channels | Yes |
| CAN | Yes |
| QEI | Yes (2) |
| Packaging | Tape and Reel (T suffix) |
| Tindminan RoHS | Compliant (RoHS3) |
| Typical Applications | AC-DC, DC-DC, PFC, UPS (digital SMPS) |
Gabay sa Pin Configuration ng DSPIC33FJ64GS608T-50I/PT 80-pin tqfp (pt)
Pin configuration para sa DSPIC33FJ64GS608T-50I/PT (80-pin tqfp (pt) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa DSPIC33FJ64GS608T-50I/PT.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
DSPIC33FJ64GS608T-50I/PT ay nararapat para sa 6 aplikasyons: AC-DC Digital Power Supplies, Power Factor Correction (PFC), DC-DC Converters, Uninterruptible Power Supplies (UPS), Solar Inverters and Battery Chargers, Industrial Motor Drive Front Ends.
AC-DC Digital Power Supplies
The DSPIC33FJ64GS608T-50I/PT is purpose-built for digitally controlled AC-DC converters: according to Microchip, the GS family directly targets AC to DC converter applications with its SMPS-dedicated high-speed PWM, synchronized high-speed ADC and analog comparators. The DSC closes the fast inner current loop in PWM/ADC hardware timing while the 50 MIPS CPU runs the outer voltage loop, startup sequencing and housekeeping. Typical designs use the complementary PWM outputs with dead-time control to drive half-bridge or flywheel stages, and the comparators provide cycle-by-cycle overcurrent trip without CPU latency. Digital control replaces analog compensation networks, allowing firmware-adjustable loop tuning and adaptive features such as burst mode or light-load efficiency optimization.
Inirekomenda
Power Factor Correction (PFC)
For PFC stages, Microchip ships an interleaved PFC reference design based on the dsPIC33FJ GS family that takes a universal AC input and produces a high-voltage DC output up to 350W. The DSPIC33FJ64GS608T-50I/PT executes average-current-mode PFC control at switching frequency using the high-speed PWM for boost-switch drive and the high-speed ADC triggered by the PWM for inductor-current sampling each cycle. The 9KB RAM holds control state, line-frequency feedforward and soft-start tables, while 64KB Flash accommodates the PFC engine plus communication and supervisory code. Firmware-implemented THD optimization and phase management give digital PFC designs flexibility that analog controllers cannot match.
Inirekomenda
DC-DC Converters
In DC-DC conversion - synchronous buck, boost, half-bridge, full-bridge and LLC topologies - the DSPIC33FJ64GS608T-50I/PT provides the digital control core. Its high-speed PWM peripheral generates complementary outputs with programmable dead time and adaptive phase shift, while the ADC, synchronized to the PWM period, samples output voltage and inductor current once or multiple times per switching cycle. The 4 on-chip comparators implement hardware overcurrent and overvoltage protection with nanosecond-class response, independent of software. The 50 MIPS DSP core with multiply-accumulate instructions executes 3P3Z or PID compensators efficiently, and the 64KB Flash leaves room for multiple topology configurations, telemetry via CAN, and field firmware updates through self-programming.
Inirekomenda
Uninterruptible Power Supplies (UPS)
UPS systems require simultaneous control of an AC-DC charger, a DC-AC inverter and static/bypass transfer logic - exactly the multi-loop scenario the GS family datasheet cites as a target application. The DSPIC33FJ64GS608T-50I/PT generates multiple independent PWM phases for the inverter bridge and the PFC/charger stage, samples AC output waveform and battery current through the synchronized ADC, and enforces hardware fault protection via its comparators. The 64KB Flash holds the inverter waveform tables, battery-charge algorithms and CAN or serial communication to a host, while QEI inputs support generator or engine-interface functions in engine-driven variants. Digital implementation enables adaptive waveform correction under nonlinear loads.
Inirekomenda
Solar Inverters and Battery Chargers
Grid-tie micro-inverters, solar charge controllers and high-current battery chargers combine an MPPT DC-DC stage with inverter or charging control - tasks matched to the DSPIC33FJ64GS608T-50I/PT. The high-speed ADC tracks PV panel voltage and current for the MPPT perturb-and-observe algorithm running on the 50 MIPS core, the SMPS PWM drives the boost or LLC converter, and comparators protect against panel overvoltage or charger overcurrent in hardware. The 64KB Flash accommodates MPPT, charging state machines (CC/CV, trickle, temperature-compensated), and CAN communication to a battery-management system or inverter host, with in-circuit self-programming enabling field firmware updates after installation.
Inirekomenda
Industrial Motor Drive Front Ends
Motor drives need both a fast power-conversion controller and motion-oriented peripherals, and the DSPIC33FJ64GS608T-50I/PT supplies both in one package. Its two QEI (quadrature encoder interface) modules decode encoder feedback from one or two axes, while the SMPS PWM generates the three-phase or DC-bus switching patterns with dead-time control; DAC channels support analog monitoring outputs and comparator inputs accept current-shunt signals for cycle-by-cycle overcurrent protection. The 50 MIPS DSP core executes field-oriented control math, and CAN links the drive to industrial networks. This combination suits servo front ends, DC-bus converters feeding drives, and digitally controlled regenerative braking stages where PWM quality and protection speed dominate.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for DSPIC33FJ64GS608T-50I/PT — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | DSPIC33FJ64GS608-50I/PT | DSPIC33FJ128GS608-50I/PT | DSPIC33FJ32GS608-50I/PT | DSPIC33FJ64GP708A-I/PT |
|---|---|---|---|---|---|
| Package | 80-pin TQFP (PT) | 80-pin TQFP - same | 80-pin TQFP - same | 80-pin TQFP - same | 80-pin TQFP - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core / Performance | dsPIC33F 16-bit, 50 MIPS | dsPIC33F 16-bit, 50 MIPS | dsPIC33F 16-bit, 50 MIPS | dsPIC33F 16-bit, 50 MIPS | dsPIC33F 16-bit, 50 MIPS |
| Program Flash | 64 KB | 64 KB | 128 KB (+100%) | 32 KB (-50%) | 64 KB |
| RAM | 9 KB | 9 KB | 9 KB | 9 KB | 8 KB (approx.) |
| SMPS High-Speed PWM | Yes (dedicated digital-power PWM) | Yes | Yes | Yes | No (standard motor-control PWM) |
| Operating Temperature | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) |
| Packaging | Tape & Reel (T) | Tube/Tray (non-T) | Tube/Tray (non-T) | Tube/Tray (non-T) | Tray |
Pangunahing mga Pagkakaiba
- SMPS-dedicated high-speed PWM with ADC synchronization (kumpara saDSPIC33FJ64GP708A-I/PT)
- Balanced 64KB Flash / 9KB RAM in 80 pins (kumpara saDSPIC33FJ32GS608-50I/PT)
- Headroom for feature growth without respin (kumpara saDSPIC33FJ128GS608-50I/PT)
- Trade-off: industrial temperature grade only in this ordering code (kumpara saDSPIC33FJ64GS608T-E/PT)
Talaan ng Disenyo
Supply the DSPIC33FJ64GS608T-50I/PT from a regulated 3.3V rail kept within the 3.0V-3.6V datasheet window. The GS family uses an internal core regulator, so the VDDCORE pin requires the specified external capacitor (per the manufacturer datasheet typical application schematic) - omitting it destabilizes the core supply and can corrupt Flash writes. Decouple every VDD and AVDD pin of the 80-TQFP with 100nF ceramics placed within 2-3 mm of the pin, plus bulk 10uF per supply domain. Keep the analog AVDD domain filtered (ferrite plus 1uF) to protect ADC accuracy.
In digital-power layouts, the DSC shares a board with high dv/dt switching nodes. Route PWM output traces with controlled loops and keep them away from ADC analog inputs, the crystal circuit and comparator input nets. Use a solid ground plane with a quiet analog region under AVDD/AVSS and the ADC reference. Connect the exposed logic ground to the power ground at a single star point near the controller. Bring MCLR (with 10k pull-up) and the PGD/PGC pair to a 5-pin ICSP header for in-circuit programming and debug without removing the TQFP.
Two common mistakes with this family: first, relying on software-only protection - the 4 on-chip comparators exist precisely because firmware loops are too slow for cycle-by-cycle overcurrent; always wire comparator fault outputs to the PWM fault mux. Second, ignoring PLL configuration at startup: the 50 MIPS rating requires the correct oscillator/PLL setup (FRC or crystal with PLL); a misconfigured clock runs the part slower and silently breaks PWM timing and ADC sampling synchronization. Verify clock configuration with the Microchip code examples and reference designs for the GS family before tuning control loops.
Impormasyon ng Pagsunod sa Kautusan
RoHS3 compliant and lead-free per distributor listings (mcu-supplier.com, components-store). REACH, halogen-free and conflict-minerals status not stated in provided data.
