EP3SL70F780C4 - Stratix III L FPGA 67.5K LE 780-FBGA | Intel / Altera
MPN: EP3SL70F780C4 ✗ Tapus ng BuhayEP3SL70F780C4 Ulas
A Field Programmable Gate Array (FPGA) is a programmable semiconductor device that allows hardware engineers to implement arbitrary digital logic through a configuration bitstream. FPGAs sit in the digital-IC hierarchy as reconfigurable logic ICs, more flexible than ASICs for prototyping and low-volume production but more power-efficient per MHz than general-purpose microcontrollers for parallel DSP, high-speed I/O, and glue-logic workloads. The Stratix III family specifically targets high-performance applications such as DSP-intensive baseband processing, high-speed serial connectivity, and high-density bus interfaces.
Key features include integrated transceiver support blocks, dedicated DSP blocks for high-throughput arithmetic, embedded M9K memory blocks, and a low-power architecture optimized for energy-efficient operation versus the original Stratix II generation. The device supports multiple I/O standards including LVDS, LVTTL, LVCMOS, and HSTL/SSTL memory interfaces, enabling direct connection to DDR/DDR2/DDR3 memories and high-speed parallel buses.
Architecture-wise, the EP3SL70F780C4 uses a Logic Element (LE) fabric with adaptive logic modules (ALMs) carrying 8-input fracturable look-up tables, a hierarchical routing network, and embedded multiplier/adder DSP blocks capable of 18x18 multiplication per cycle. The 65 nm process combined with the L-series power optimizations yields dynamic and static power reductions of roughly 50% versus Stratix II, making it suitable for thermally constrained systems.
Typical applications include telecom baseband processing, military radar signal processing, high-end test and measurement equipment, medical imaging accelerators, broadcast video processing, and wire-speed network packet inspection. The combination of 67.5K LEs and 488 I/Os makes it ideal for high-bandwidth parallel processing and custom interface bridging.
When designing with this FPGA, pay close attention to the Quartus II / Quartus Prime toolchain requirements: pin assignments must respect the FBGA-780 ball map, multi-voltage rails (1.1 V core, 2.5 V/3.3 V aux) require clean power sequencing, and high-speed serial links need reference-clock jitter below 1 ps RMS. Thermal management on FBGA-780 requires at least a 4-layer PCB with a thermal via array under the exposed die pad.
This page synthesizes distributor pricing, drop-in alternatives from the Stratix III family, and practical Quartus II design notes not found in the manufacturer datasheet alone.
Mga alternatibo na pwedeng ilagay na EP3SL70F780C4 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok EP3SL70F780C4 (parehas na form factor at footprint) — pagkakaiba sa Speed Grade, Package, Mounting Type, Process Technology, RoHS Status.
EP3SL70F780C3
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →EP3SL70F780C2
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →EP3SL70F780I4
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →EP3SL70F780I3
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →EP3SL70F780C3N
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →EP3SL70F780C4 Mga Pinakamataas na Rating at Electrical Characteristics
| Series | Stratix III L |
| Family | Stratix III |
| Logic Elements | 67,500 |
| Embedded Memory Bits | 2,699,264 bits |
| User I/O Count | 488 |
| LABs/CLBs | 2700 |
| Packhaging | 780-BBGA, FCBGA (FBGA-780) |
| Bilang ng Pin | 780 |
| Process Technology | 65 nm |
| Core Voltage | 1.1 V |
| Speed Grade | C4 |
| Temperature na Operasyon | 0 C to 85 C (Commercial TJ) |
| Uri ng Pagpapasok | Surface Mount |
| Number of Logic Elements / Cells | 67500 |
| Tindminan RoHS | Compliant (per distributor listing) |
Gabay sa Pin Configuration ng EP3SL70F780C4 780-bbga, fcbga (fbga-780)
Pin configuration para sa EP3SL70F780C4 (780-bbga, fcbga (fbga-780) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa EP3SL70F780C4.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
EP3SL70F780C4 ay nararapat para sa 6 aplikasyons: Telecom Baseband Processing, Military Radar Signal Processing, Test and Measurement Instrumentation, Medical Imaging Accelerators, Broadcast Video Processing, Wire-Speed Network Packet Inspection.
Telecom Baseband Processing
The EP3SL70F780C4 is well suited for telecom baseband processing thanks to its 67,500 logic elements and embedded DSP blocks that sustain 500 MHz operation. Its 488 user I/Os allow direct parallel bus interfacing to analog front ends and backplane SERDES glue logic, while 2,699,264 bits of embedded memory support symbol-rate FIFO buffering and channel estimation tables. The 1.1 V core reduces dynamic power per MHz compared with earlier Stratix generations, which is critical in chassis-mounted line cards where hundreds of FPGAs share a single backplane. Drop the part onto the FBGA-780 footprint and pair it with external DDR3 memory for symbol buffers. Designers should respect multi-voltage rail sequencing (1.1 V core before 2.5/3.3 V aux) to avoid latch-up.
Inirekomenda
Military Radar Signal Processing
The EP3SL70F780C4's combination of 67.5K LEs, 2,700 LABs, and integrated DSP blocks makes it a workhorse for military radar pulse compression, MTI filtering, and CFAR detection pipelines. The C4 commercial speed grade delivers timing margin for 200-300 MHz radar baseband sampling, while the 488 I/Os handle parallel ADC/DAC interfaces commonly used in legacy radar receivers. Embedded M9K memory provides deterministic-latency ping-pong buffers for IQ sample streams. For harsher thermal envelopes, the I4 industrial grade shares the same FBGA-780 footprint. Place at least one decoupling capacitor per power pin and route a continuous ground plane beneath the BGA to control simultaneous switching noise from the high-I/O-count package.
Inirekomenda
Test and Measurement Instrumentation
Test equipment such as oscilloscopes, logic analyzers, and protocol testers leverage the EP3SL70F780C4 for waveform capture, pattern generation, and protocol-aware triggering. The 488 user I/Os allow direct fan-out to multiple front-panel probe channels, while the FPGA fabric implements custom trigger sequencers in real time at 500 MHz. Embedded M9K memory provides deep sample storage between trigger events without external SRAM round-trips. Quartus II / Quartus Prime development flows support seamless integration of soft IP cores like PCIe Gen1 endpoints and Ethernet MACs for instrument-to-host links. Designers should budget at least four PCB layers under the BGA to manage signal-integrity for high-speed LVDS channels.
Inirekomenda
Medical Imaging Accelerators
The EP3SL70F780C4 accelerates image-reconstruction pipelines in CT, MRI, and ultrasound systems where deterministic DSP throughput is required. The 65 nm process node and 1.1 V core voltage produce a thermal envelope compatible with medical-grade chassis cooling, while 67.5K LEs and abundant DSP blocks execute parallel FFT, convolution, and back-projection kernels in real time. The 488 I/Os support high-bandwidth ADC and LVDS interfaces from front-end detector arrays. Embedded M9K memory accelerates line buffers for image interpolation. Verify IEC 60601-1 patient-leakage and EMI compliance at the system level when integrating this FPGA into medical equipment. A heatsink or thermal via array is recommended under the FBGA die pad for sustained workloads.
Inirekomenda
Broadcast Video Processing
Broadcast video routers, format converters, and frame synchronizers rely on the EP3SL70F780C4 for real-time SDI/HD-SDI/3G-SDI processing, color-space conversion, and chroma keying. The 488 user I/Os accommodate multiple BNC-style SDI inputs alongside downstream HDMI/DVI outputs, and the embedded DSP blocks support 4:2:2 to 4:4:4 upscaling without external ASICs. At 500 MHz fabric speed, the device processes multiple HD video streams in parallel with negligible latency. For 4K/UHD workflows, consider migrating to the EP3SL150F780 series in the same FBGA-780 footprint. Quartus II IP cores simplify SDI scrambling/descrambling and ancillary data extraction for captioning and AFD metadata.
Inirekomenda
Wire-Speed Network Packet Inspection
Deep-packet-inspection (DPI) line cards in carrier-grade routers leverage the EP3SL70F780C4 to parse multi-gigabit traffic flows and execute parallel regular-expression matchers on every packet header. The 67.5K LEs and 2,700 LABs map efficiently onto TCAM-style content-addressable memories implemented in fabric, while the 488 I/Os support multiple 10 Gbps Ethernet interfaces via SFP+ cages. Embedded M9K memory buffers packet descriptors between classifier and forwarding stages. The 65 nm low-power Stratix III L variant balances per-MHz power consumption against throughput, an important consideration in chassis with hundreds of line cards. A continuous GND plane and matched-length impedance routing are critical above 1 Gbps on this FBGA-780 package.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for EP3SL70F780C4 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | EP3SL70F780C3 | EP3SL70F780C2 | EP3SL70F780I4 | EP3SL70F780I3 | EP3SL70F780C3N |
|---|---|---|---|---|---|---|
| Brand | Intel (formerly Altera) | Intel (formerly Altera) | Intel (formerly Altera) | Intel (formerly Altera) | Intel (formerly Altera) | Intel (formerly Altera) |
| Package | 780-FBGA (FCBGA-780) | 780-FBGA - same | 780-FBGA - same | 780-FBGA - same | 780-FBGA - same | 780-FBGA - same |
| Logic Elements | 67,500 | 67,500 | 67,500 | 67,500 | 67,500 | 67,500 |
| Embedded Memory (bits) | 2,699,264 | 2,699,264 | 2,699,264 | 2,699,264 | 2,699,264 | 2,699,264 |
| User I/Os | 488 | 488 | 488 | 488 | 488 | 488 |
| Speed Grade | C4 (commercial) | C3 (slower) | C2 (slowest) | I4 (industrial) | I3 (industrial, slower) | C3 (slower, lead-free) |
| Operating Temperature (TJ) | 0 C to 85 C | 0 C to 85 C | 0 C to 85 C | -40 C to 100 C | -40 C to 100 C | 0 C to 85 C |
| Core Voltage | 1.1 V | 1.1 V | 1.1 V | 1.1 V | 1.1 V | 1.1 V |
| Process Technology | 65 nm | 65 nm | 65 nm | 65 nm | 65 nm | 65 nm |
Pangunahing mga Pagkakaiba
- Speed grade C4 offers highest timing margin in the EP3SL70F780 family (kumpara saEP3SL70F780C3)
- Industrial temperature variant EP3SL70F780I4 enables harsher deployments (kumpara saEP3SL70F780I4)
- Direct same-family upgrade path to higher density EP3SL150F780I3N (kumpara saEP3SL150F780I3N)
Talaan ng Disenyo
The EP3SL70F780C4 requires a clean multi-rail power architecture: 1.1 V for the core, 2.5 V/3.3 V for auxiliary and I/O banks, and a dedicated PLL analog supply (VCCA_PLL) typically 2.5 V. Per the Altera Stratix III device handbook, the core rail must ramp before or simultaneously with the aux rail to avoid latch-up. Decoupling follows the 1-2-4 rule: one bulk capacitor per power pin group, two mid-frequency ceramics per VCC/GND pair, and four high-frequency 0.1 uF capacitors within 50 mils of each power pin. The 1.1 V core can draw 2-5 A depending on toggle rate, so use a controller with at least 10 A peak capability and a 4-layer PCB with 2 oz copper on inner power planes.
The 780-FBGA package exposes a central thermal die pad that must be soldered to a thermal via array for heat extraction. Estimated: with theta_JA of approximately 10-12 C/W on a 4-layer JEDEC test board and 25% utilization at 500 MHz, junction temperature rise can exceed 30 C above ambient. For sustained workloads, add a copper heatsink or forced-air cooling. Industrial grade variants (I4/I3) extend the operating junction envelope from 85 C to 100 C and are recommended for chassis-mounted or outdoor deployments.
PCB layout for the EP3SL70F780C4 must follow Altera's Stratix III pin connection guidelines. Use a 6-8 layer stackup with continuous ground planes beneath the BGA field to control simultaneous switching noise across the 488 I/Os. Matched-length impedance routing is required for DDR3 interfaces (target 50 ohm single-ended, 100 ohm differential). Place decoupling capacitors on the opposite side of the BGA within 100 mils of their respective power pins, and provide an unbroken return path beneath each high-speed signal trace. Failure to control return paths on this 488-I/O device is a common cause of signal-integrity failures on first prototypes.
Three pitfalls repeatedly surface on Stratix III designs: (1) omitting the PLL analog supply filter (a ferrite bead plus 10 uF + 0.1 uF network) which causes PLL jitter and link training failures; (2) leaving CONFIG_DONE / nSTATUS / nCONFIG unbonded or incorrectly pulled - these require external 10 kohm pull-ups to 2.5 V; (3) using 1.8 V I/O standards without configuring the bank VCCIO to 1.8 V, leading to partial configuration and unreliable JTAG chains. Always validate the configuration chain with Quartus II programmer before depopulating the board for rework.
High-speed serial interfaces (LVDS, DDR3, external memory interfaces) should be routed on inner stripline layers adjacent to a solid ground plane. Per the Stratix III device handbook, the recommended BGA breakout uses via-in-pad or microvia technology for inner rows; dog-bone fan-out is acceptable for outer rows but adds parasitic inductance. Maintain at least 3W spacing between differential pairs and adjacent signals to minimize crosstalk. The 488 user I/Os allow designers to map DDR3 byte lanes to bank groups 1-8; grouping by byte-lane avoids the need for level shifters between bank voltages.
Impormasyon ng Pagsunod sa Kautusan
RoHS compliance per distributor listing (DigiKey/Mouser). REACH, halogen-free, and conflict-mineral declarations were not present in the verified web data and are marked unknown. The EP3SL70F780C4 is not AEC-Q100 qualified - it targets commercial telecom, broadcast, and industrial applications rather than automotive safety.
