ISL8282MFRZ-T1 - 15A PMBus Step-Down Power Module | Renesas
MPN: ISL8282MFRZ-T1 ✓ NakahandaISL8282MFRZ-T1 Ulas
A point-of-load (PoL) DC/DC power module is a device that integrates a switching regulator controller, power MOSFETs, inductor, and most passive components into a single encapsulated package. Within the power management hierarchy, it sits above discrete converters and below complete power supplies, dramatically reducing external component count, design complexity, and board area while guaranteeing optimized internal layout for switching performance.
Key features of the ISL8282M include up to 95% peak conversion efficiency, digital PMBus/SMBus control and telemetry for output voltage adjustment, sequencing, margining, and monitoring, plus integrated LDOs that power internal circuitry. The proprietary Renesas R4 Technology control architecture provides fast transient response and stable operation across the full 0.5V to 5V output range.
Technically, the hybrid digital architecture combines a digital control loop with integrated power stage magnetics in the HDA package, achieving high power density suitable for space-constrained boards. Fully encapsulated construction protects against moisture and mechanical stress, and the thermally enhanced substrate conducts heat to the PCB for convection cooling without a heatsink at moderate loads.
Typical applications include FPGA and ASIC core power rails in networking switches, data-center and server line cards, industrial automation controllers, and wireless infrastructure equipment where digital power telemetry via PMBus is required.
For design, ensure adequate copper area under the module thermal pad to keep junction temperature within limits at high load, and follow the datasheet-recommended external capacitor values for input and output stability.
This page synthesizes distributor pricing, verified alternatives, and practical design guidance not found in the manufacturer datasheet alone.
Mga alternatibo na pwedeng ilagay na ISL8282MFRZ-T1 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok ISL8282MFRZ-T1 (parehas na form factor at footprint) — pagkakaiba sa Mounting Type, Topology, Control Type, Digital Interface, Integrated Features.
ISL8281MFRZ-T1
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
ISL8282MFRZ-T1 Mga Pinakamataas na Rating at Electrical Characteristics
| Topolohiya | Non-Isolated PoL Step-Down (Buck) Module |
| Control Type | Digital (PMBus enabled), Renesas R4 Technology |
| Bilang ng Outputs | 1 |
| Hanay ng Voltage ng Input | 4.5 V to 16.5 V |
| Hanay ng Output Volte | 0.5 V to 5 V |
| Maksimum na Current ng Output | 15 A continuous |
| Peak Efficiency | up to 95% |
| Digital Interface | PMBus |
| Integrated LDOs | Yes (internal bias supply) |
| Packhaging | HDA-83 (12 x 11 x 5.3 mm), fully encapsulated |
| Uri ng Pagpapasok | Surface Mount |
| Package Height | 5.3 mm |
| Package Dimensions | 12 mm x 11 mm |
Gabay sa Pin Configuration ng ISL8282MFRZ-T1 12 mm x 11 mm
Pin configuration para sa ISL8282MFRZ-T1 (12 mm x 11 mm package). Ang power device na ito ay may gate, drain, at source terminals. Para sa mga non-polarized package, sumangguni sa datasheet ng manufacturer para sa eksaktong oryentasyon ng pin 1 at mga detalye ng footprint. Kasama sa mga karaniwang aplikasyon ang disenyo ng power supply, motor driving, at load switching.
Wala ng detalyadong pinout data na magagamit para sa ISL8282MFRZ-T1.
Sumangguni sa datasheet para sa buong pin configuration.
Ligtas na Operating Area (Estimated - output current derating)
Tipikal na mga Gamit
ISL8282MFRZ-T1 ay nararapat para sa 6 aplikasyons: FPGA Core Power Supply, Networking Switch and Router Line Cards, Data-Center Server Power, Industrial Automation Controllers, Wireless Infrastructure Equipment, ASIC and Processor Point-of-Load.
FPGA Core Power Supply
The ISL8282MFRZ-T1 is well suited to FPGA core (VCCINT/VCCBRAM) power rails because FPGAs demand high current at low voltages with tight tolerance and fast transient response. With a 0.5V to 5V adjustable output and 15A continuous current, a single module can supply up to 75W, covering most mid-range FPGA core requirements from a 12V intermediate bus. The Renesas R4 Technology digital control loop provides rapid response to load steps, and PMBus telemetry allows the host to monitor voltage and current in real time. Designers should size PCB copper under the thermal pad for the worst-case 15A load and use the PMBus interface for sequencing relative to I/O banks.
Inirekomenda
Networking Switch and Router Line Cards
Line cards in enterprise and data-center switches use 12V intermediate bus architectures feeding multiple point-of-load converters. The ISL8282M's 4.5V to 16.5V input range accepts the 12V bus directly, while its PMBus/SMBus interface integrates with the chassis power-management controller for voltage margining, fault logging, and telemetry-based predictive maintenance. The compact 12 mm x 11 mm x 5.3 mm HDA-83 footprint suits the tight vertical spacing of line-card designs, and up to 95% efficiency reduces the total airflow and heatsinking budget across a card populated with multiple modules.
Inirekomenda
Data-Center Server Power
Server boards require dense, digitally managed PoL conversion for CPUs, ASICs, and memory subsystems. The ISL8282MFRZ-T1 provides 15A continuous output with digital telemetry, enabling the BMC to monitor rail health through PMBus and log faults during operation. Its high power density - 75W capability in a 132 mm2 footprint - helps meet aggressive board-space targets, and the fully encapsulated HDA construction withstands reflow and vibration in high-reliability server environments. Multi-rail sequencing via PMBus simplifies bring-up of complex processor power trees.
Inirekomenda
Industrial Automation Controllers
Industrial PLCs, motor-control boards, and I/O modules commonly run from 24V systems scaled down to 12V intermediates; the ISL8282M converts that 12V rail to the 5V or lower logic supplies required by processors and sensors. The wide 4.5V to 16.5V input tolerates bus transients common in factory environments, and PMBus configuration allows one firmware image to set different output voltages across product variants, reducing BOM diversity. Encapsulated packaging adds robustness against dust and humidity encountered in industrial cabinets, supporting long-term reliability targets.
Inirekomenda
Wireless Infrastructure Equipment
Baseband units and remote radio equipment rely on high-efficiency PoL conversion to minimize thermal load in sealed outdoor enclosures. The ISL8282M's up to 95% efficiency reduces wasted heat, directly lowering cooling requirements for passively cooled outdoor units. The PMBus interface supports remote monitoring of rail voltage, current, and temperature from the system controller, enabling predictive maintenance of tower-mounted equipment where site visits are costly. The 12 mm x 11 mm footprint conserves PCB area in dense radio modems.
Inirekomenda
ASIC and Processor Point-of-Load
Custom ASICs and embedded processors require tightly regulated sub-1V to 5V rails with dynamic voltage scaling. The ISL8282M covers the full 0.5V to 5V output range and supports PMBus-commanded output voltage changes, enabling DVFS power-saving schemes without external DAC circuitry. The integrated LDOs for internal bias reduce external component count, and the R4 digital control maintains stability across output setpoint changes. Designers should validate transient response at their specific load profile using the datasheet evaluation guidelines.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for ISL8282MFRZ-T1 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | ISL8281MFRZ-T1 |
|---|---|---|
| Package | HDA-83 (12 x 11 x 5.3 mm) | HDA-83 (12 x 11 x 5.3 mm) - same |
| Brand | Renesas Electronics | Renesas Electronics - same |
| Maximum Output Current | 15 A | 10 A |
| PMBus Interface | Yes | Yes |
| Control Technology | Renesas R4 digital | Renesas digital control |
Pangunahing mga Pagkakaiba
- Highest current in the HDA module family (kumpara saISL8281MFRZ-T1)
- Fully integrated hybrid digital design (kumpara saDiscrete buck controller solutions)
- Trade-off: PMBus complexity (kumpara saISL8281MFRZ-T1)
Talaan ng Disenyo
At 15A output with a 5V rail from a 12V input, the ISL8282M dissipates internal power due to conduction and switching losses; at up to 95% peak efficiency this can be roughly 2-4W depending on operating point (Estimated: 75W output / 0.95 efficiency implies ~4W loss worst case). Provide continuous copper pours under the module thermal features on outer and inner layers to spread heat; the fully encapsulated HDA-83 package relies primarily on PCB conduction, not airflow.
Follow the layout guidelines in the 51-page Renesas ISL8282M datasheet: place low-ESR input capacitors close to the VIN pins to suppress input ripple transients, and size output capacitance per the datasheet table for the chosen output voltage and load-step requirement. Connect all GND pins to a solid ground plane with multiple vias to reduce impedance and improve thermal performance.
Use the PMBus interface to configure output voltage rather than assuming a default setpoint - the ISL8282M output must be programmed within the 0.5V to 5V allowed range, and sequencing/margining commands must respect datasheet slew-rate limits. Exceeding the 16.5V maximum input, even transiently, can damage the module; verify upstream bus transients on 12V rails that can legally spike above nominal during fault events.
Impormasyon ng Pagsunod sa Kautusan
Compliance status was not stated in the verified web data; consult the Renesas product page certificate documents for RoHS/REACH declarations.
