ISL84052IA - Dual 4:1 Analog Multiplexer | Renesas
MPN: ISL84052IA ✗ Tapus ng BuhayISL84052IA Ulas
An analog multiplexer is an interface IC that connects multiple signal paths to a shared output through controlled switches. The ISL84052IA belongs to the analog switch and multiplexer hierarchy, within interface ICs and discrete semiconductor switching systems. Its dual 4:1 organization allows two independent channels to be selected by digital control logic, reducing the number of external routing components in systems with multiple sensors, test points, or measurement channels. The low-voltage capability also supports modern mixed-signal equipment operating from reduced supply rails.
Key electrical features include 100-ohm on-resistance, 225-ohm maximum on-resistance at a positive 5 V supply, less than 6-ohm on-resistance matching between channels, and 2 pC charge injection. The device is described as having low-voltage, single and dual supply operation, TTL/CMOS-compatible inputs, and a maximum signal current rating of 30 mA. The Renesas product page identifies compatibility with MAX4051, MAX4052, MAX4053, MAX4581, MAX4582, MAX4583, 74HC4051, 74HC4052, and 74HC4053 families.
The two independent switches make the ISL84052IA useful in instrumentation where several inputs must be routed to separate measurement channels. It can also be used in battery-powered test equipment, signal-conditioning boards, automated test equipment, and communication interfaces where supply voltage and board area are constrained. The digital select inputs allow the multiplexing function to be coordinated by a microcontroller or system logic.
The main design consideration is ensuring that the selected signal amplitude, supply polarity, and control levels remain within the device's operating limits. Input and output filtering may be needed when switch transitions produce transient charge injection. The QSOP package also requires adequate spacing between adjacent high-impedance nodes to reduce leakage and coupling. For replacement decisions, compare the exact pin arrangement and supply configuration rather than relying only on the multiplexer description.
This page combines the manufacturer product-page characteristics, datasheet parameters, package information, application guidance, and drop-in comparison considerations for engineers evaluating the ISL84052IA. It provides practical selection context beyond a basic distributor listing.
Mga alternatibo na pwedeng ilagay na ISL84052IA — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok ISL84052IA (parehas na form factor at footprint) — pagkakaiba sa Configuration, Package.
MAX4051
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MAX4052
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MAX4053
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MAX4581
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
74HC4051
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
74HC4052D
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →74HC4053
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
ISL84052IA Mga Spesipikasyon
| Device Type | Dual 4:1 analog multiplexer, 2 circuits |
| Configuration | 2 x SP4T (single-pole, 4-throw) |
| Single-Supply Operating Range | 2 V to 12 V |
| Dual-Supply Operating Range | 0.3 V to 15 V |
| Typical On-Resistance | 100 ohms |
| Maximum On-Resistance | 225 ohms at VS = +5 V |
| On-Resistance Matching Between Channels | Less than 6 ohms |
| Charge Injection | 2 pC |
| Maximum Signal Current | 30 mA |
| Logic Input Compatibility | TTL/CMOS inputs |
| Number of Circuits | 2 |
| Bilang ng Pins | 16 pins |
| Packhaging | 16-pin QSOP |
| Uri ng Pagpapasok | Surface mount |
| Operating Voltage | 0.3 V to 15 V |
| Datasheet Page Count | 18 pages |
Gabay sa Pin Configuration ng ISL84052IA 16-pin qsop
Pin configuration para sa ISL84052IA (16-pin qsop package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa ISL84052IA.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
ISL84052IA ay nararapat para sa 6 aplikasyons: Automated Test Equipment Signal Routing, Battery-Powered Sensor Multiplexing, Data Acquisition Front Ends, Communication Signal Conditioning, Laboratory Measurement Instruments, Industrial Control Signal Routing.
Automated Test Equipment Signal Routing
The ISL84052IA fits automated test equipment that must route several low-frequency analog nodes into shared measurement channels. Its two independent 4:1 sections provide two routing banks from one 16-QSOP device, while 100-ohm typical on-resistance limits signal-path loss. The less-than-6-ohm matching specification helps maintain channel-to-channel amplitude consistency, and the 2-pC charge-injection value is useful when controlling switch-induced timing errors. The design should still account for bandwidth, off-state leakage, and the finite settling time of the selected measurement front end.
Inirekomenda
Battery-Powered Sensor Multiplexing
The ISL84052IA is useful for compact sensor interfaces that operate from a single supply between 2 V and 12 V. Two 4:1 groups can select multiple sensor outputs without requiring a separate package for every analog path, reducing board area in battery-powered instruments. Its TTL/CMOS-compatible control inputs simplify interfacing with low-voltage microcontroller logic, while the 30 mA maximum signal-current rating provides a defined operating limit. Designers should add suitable input protection and verify that sensor output levels remain within the selected switch's signal-range limits.
Inirekomenda
Data Acquisition Front Ends
The dual 4:1 topology of the ISL84052IA suits data-acquisition front ends that need to present several inputs to two shared analog-processing paths. Its 16-QSOP package supports dense board placement, and the less-than-6-ohm channel-matching characteristic helps reduce variation between measured channels. The device can operate from a single 2 V to 12 V rail or a dual supply within 0.3 V to 15 V. At the system level, the multiplexer should be paired with anti-alias filtering and an ADC whose input range is compatible with the selected analog signal amplitudes.
Inirekomenda
Communication Signal Conditioning
The ISL84052IA can route multiple low-frequency communication signals into a common conditioning chain when board area is constrained. Its low-voltage supply range accommodates compact mixed-signal systems, and TTL/CMOS-compatible select inputs permit direct control from common digital logic. The 100-ohm typical on-resistance adds a defined series resistance that must be included when calculating signal attenuation with high-impedance downstream circuits. For higher-frequency paths, check bandwidth and off-state isolation limits before selecting this multiplexer.
Inirekomenda
Laboratory Measurement Instruments
The ISL84052IA is appropriate for laboratory instruments that select among several probes, reference nodes, or conditioning inputs. Two independent 4:1 switch sections allow the instrument to multiplex more than one measurement group while maintaining a compact 16-pin QSOP footprint. The 2-pC charge-injection specification assists in estimating control-induced transients, and the 225-ohm maximum on-resistance at +5 V provides a basis for worst-case path-loss calculations. High-impedance buffers near the selected input can reduce loading when the instrument requires greater measurement accuracy.
Inirekomenda
Industrial Control Signal Routing
The ISL84052IA can route low-voltage control or monitoring signals in industrial equipment where dual supply operation and flexible multiplexing are useful. Its dual 4:1 organization provides two independently controlled analog selectors, while the single-supply range of 2 V to 12 V supports compact embedded control boards. Industrial designs should account for transient voltage, ground offsets, and connector protection because the muxer's basic 0.3 V to 15 V operating range does not by itself define surge immunity. Adding protection and filtering ahead of the switch helps preserve signal integrity during external-interface events.
Inirekomenda
Impormasyon ng Talumpati sa Engineering for ISL84052IA — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | MAX4051 | MAX4052 | MAX4053 | MAX4581 | 74HC4051 |
|---|---|---|---|---|---|---|
| Package | 16-QSOP | 16-QSOP | 16-QSOP | 16-QSOP | 16-QSOP | 16-QSOP |
| Brand | Renesas Electronics | Analog Devices | Analog Devices | Analog Devices | Analog Devices | NXP |
Pangunahing mga Pagkakaiba
- Two independent 4:1 switches in one package (kumpara saMAX4051)
- Defined channel-matching characteristic (kumpara saMAX4052)
- Low-voltage dual-supply flexibility (kumpara sa74HC4053)
- Documented charge-injection target (kumpara saMAX4581)
Talaan ng Disenyo
Use the 100-ohm typical and 225-ohm maximum on-resistance values when calculating insertion loss with the actual source and destination impedances. The less-than-6-ohm channel-matching specification helps quantify variation between routes, but it does not eliminate errors caused by downstream amplifier input impedance. Place a high-impedance buffer near the muxed output when low-level measurements require minimal loading.
Do not infer the control truth table, signal-range limits, or exposed-pin connections from the product description. Check the numbered pin table in the Intersil datasheet and confirm the exact ordering suffix before routing PCB tracks. A family-level compatibility statement does not guarantee that every package, temperature grade, and lead configuration has identical enable, select, and power pin assignments.
Place the muxed outputs and their protection or conditioning components close to the IC to minimize trace capacitance and susceptibility to injected noise. Keep sensitive input traces away from digital select lines and any clocked circuitry sharing the board. Maintain adequate ground-return paths under high-impedance nodes, because leakage and capacitive coupling can degrade accuracy even when the on-resistance specification is acceptable.
Design for either a single supply from 2 V to 12 V or a dual supply within 0.3 V to 15 V, as stated by the manufacturer. Confirm the signal amplitude does not exceed the usable input-to-output range for the selected supply arrangement. Bypass the supply pins locally and use a quiet source if analog accuracy is important, because the muxer's low on-resistance does not remove switching or reference noise originating elsewhere in the system.
Impormasyon ng Pagsunod sa Kautusan
Compliance attributes are not confirmed in the indexed manufacturer and distributor excerpts. Obtain the current Renesas material and environmental compliance documentation for the exact ordering code.