ISL84543IB - Dual 60 Ohm Analog Switch | Renesas Electronics
MPN: ISL84543IB ✓ NakahandaISL84543IB Ulas
An analog switch is a semiconductor interface that routes electrical signals between internal nodes without amplifying or converting them. The ISL84543IB belongs to the analog switch and multiplexer hierarchy, where each switch path connects or isolates a signal under digital control. Its low on-resistance minimizes signal attenuation, while its fast switching operation supports time-domain and communication equipment in which control latency affects system performance.
The principal benefits of the ISL84543IB are its 60 ohm on-resistance, 25 ns and 35 ns switching specifications, and operation across a broad 2.7 V to 12 V supply range. The low switching resistance is especially useful when routing sensor, test, or low-level analog signals. The dual 1:1 configuration allows two signals to be switched independently, making the device suitable for scan paths, signal-isolation circuits, configurable analog front ends, and resource-limited embedded systems.
The 8-SOIC package provides a compact surface-mount implementation with exposed external leads and standard production-board handling. Because the device uses a single positive supply, its control circuitry and analog signal paths can operate without a negative supply rail. Designers should account for input-voltage limits, control-logic levels, off-state leakage, signal capacitance, and the effect of the switch resistance when calculating gain, settling time, and usable bandwidth.
Typical applications include automated test equipment, oscilloscope and measurement front ends, communications routing, analog signal conditioning, battery-powered instruments, and embedded control systems. Two channels in one package reduce board area compared with separate single-switch implementations. The device is particularly useful when a system must route two analog signals with separate control commands while retaining low switching resistance and short switching times.
A practical design consideration is to keep analog traces short and provide a solid ground reference beneath or near the switching network. Control traces should be driven with compatible logic levels, and unused control or signal pins should be connected according to the Renesas datasheet. Check the complete electrical limits and recommended operating conditions before using the switch outside its characterized supply range.
This page combines the manufacturer-specific ISL84543IB electrical characteristics with pin-compatible replacement information, application guidance, and engineering-focused design notes. It supports faster part selection while keeping replacement decisions centered on package compatibility, signal integrity, timing, and operating conditions.
Mga alternatibo na pwedeng ilagay na ISL84543IB — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok ISL84543IB (parehas na form factor at footprint) — pagkakaiba sa Package, Supply Voltage Range.
MAX4541
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MAX4544
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
DG9263
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MAX3232EIPWG4
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →ISL84543IB Mga Pinakamataas na Rating at Electrical Characteristics
| Number of Switches | 2 switches |
| Switch Configuration | 1:1, dual SPST/SPDT analog switch family |
| On-Resistance | 60 ohm |
| Supply Voltage Range | 2.7 V to 12 V |
| Switching Time | 25 ns and 35 ns |
| Signal Capacitance | 13 pF |
| Off-State Leakage | 100 pA |
| Hanay ng Temperature na Operasyon | -40 °C to +85 °C |
| Packhaging | 8-pin SOIC |
| Package Width | 3.90 mm |
| Package Body Length | 0.154 inch |
| Supply Type | Single positive supply |
| Bilang ng Pin | 8 pins |
| Uri ng Pagpapasok | Surface mount |
| Functional Blocks | 2 analog switch circuits |
Gabay sa Pin Configuration ng ISL84543IB 0.154 inch
Pin configuration para sa ISL84543IB (0.154 inch package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa ISL84543IB.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
ISL84543IB ay nararapat para sa 6 aplikasyons: Automated Test Equipment Signal Routing, Precision Measurement Front Ends, Embedded Analog Signal Conditioning, Communications and Data Acquisition, Battery-Powered Instrument Interfaces, Configurable Test and Isolation Circuits.
Automated Test Equipment Signal Routing
The ISL84543IB fits automated test paths because two analog switch circuits in one 8-pin SOIC can route two signals without duplicating the control hardware. Its 60 ohm on-resistance limits insertion loss for low-level analog nodes, while 25 ns and 35 ns switching specifications support fast fixture transitions. Use the two SPST paths for source selection, loopback routing, or isolation between a device under test and external instrumentation. Confirm that the 100 pA off-state leakage remains acceptable for the measurement impedance and that the 2.7 V to 12 V supply range covers the test-system rail.
Inirekomenda
Precision Measurement Front Ends
The ISL84543IB is suitable for precision measurement front ends that route sensor or instrument signals into an analog processing channel. A 60 ohm on-resistance helps preserve signal amplitude, and the 13 pF capacitance is important when working with high-impedance sources or long interconnect paths. The two channels can select between two inputs, implement a simple isolation path, or support scan-based measurements. The -40 °C to +85 °C operating range supports industrial environments, but the complete front end should be checked for offset, leakage, settling time, and source impedance beyond the switch specifications.
Inirekomenda
Embedded Analog Signal Conditioning
The ISL84543IB can add configurable routing to an embedded analog front end when the controller has limited GPIO or multiplexed input capacity. Its dual 1:1 arrangement allows two analog nodes to be selected under software control, reducing the need for external relays or larger multiplexers. The single 2.7 V to 12 V supply simplifies power planning in systems operating near 3.3 V or 5 V. Designers should compare the 13 pF signal capacitance with the impedance of the driven network, include suitable control deglitching, and ensure the switched signal amplitude remains within the device's input limits.
Inirekomenda
Communications and Data Acquisition
The ISL84543IB is appropriate for communication and data-acquisition boards that need two rapidly controlled analog paths. Its 25 ns and 35 ns switching-time specifications help minimize control dead time, while 60 ohm on-resistance provides a defined insertion-loss term in the routed path. The compact 8-pin SOIC saves board space relative to two discrete switch packages. For high-speed or high-impedance networks, evaluate capacitance, bandwidth, return loss, and crosstalk at the operating frequency, and use controlled-impedance routing to prevent the switch package and PCB traces from dominating measurement accuracy.
Inirekomenda
Battery-Powered Instrument Interfaces
The ISL84543IB suits battery-powered instruments because it requires only one positive supply and operates down to 2.7 V. The dual-switch arrangement provides routing flexibility without using two separate packages, while 100 pA off-state leakage helps limit unwanted coupling into sensitive battery-powered circuits. Place the device near the controlled analog nodes to minimize trace resistance and susceptibility to interference. Check the control thresholds against the system logic voltage, include adequate supply bypassing, and evaluate the off-state leakage against the source impedance because total circuit leakage may otherwise dominate a high-impedance sensor node.
Inirekomenda
Configurable Test and Isolation Circuits
The ISL84543IB supports configurable isolation circuits where two channels must disconnect or connect under software control. Its 1:1 dual topology is straightforward to use for loopback, source isolation, or controlled test insertion. The 60 ohm on-resistance provides a known series path, and the broad -40 °C to +85 °C range accommodates industrial equipment. Protection components may still be required at exposed connectors because the switch specifications do not eliminate external overvoltage risk. Validate control polarity, off-state behavior, and the exact pin assignments against the Renesas datasheet before scaling the circuit into production.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for ISL84543IB — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | MAX4541 | MAX4544 | DG9263 | MAX323 |
|---|---|---|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Brand | Renesas Electronics | Maxim Integrated | Maxim Integrated | onsemi | Maxim Integrated |
| Cross-Reference Status | Renesas ISL84543IB | Drop-in replacement for ISL84543IB | Drop-in replacement for ISL84543IB | Drop-in replacement for ISL84543IB | Pin-compatible with ISL84543IB |
Pangunahing mga Pagkakaiba
- Single positive-supply operation across a broad voltage range (kumpara saMAX323)
- Specified switching performance for fast analog routing (kumpara saMAX4541)
- Defined leakage and capacitance characteristics (kumpara saDG9263)
Talaan ng Disenyo
Treat the 60 ohm on-resistance as a series element in the signal path and include it when calculating insertion loss, especially with high-impedance downstream circuits. The 13 pF signal capacitance can create a slow transition when combined with a high source impedance. Estimated: with a 10 kΩ source resistance, the RC time constant is approximately 10 kΩ × 13 pF = 130 ns. Compare that value with the required settling time and bandwidth before selecting switch and source impedances.
Place the ISL84543IB close to the analog nodes that it routes and keep the control traces away from sensitive input paths. Provide a short ground return and follow the manufacturer recommended bypass-capacitor arrangement around the single supply connection. Preserve the package's standard pin-one orientation and verify every analog and control connection against the datasheet pin table. Incorrect control polarity or supply decoupling can make a correctly routed board appear to have an intermittent switch failure.
Do not assume that a drop-in cross-reference guarantees identical behavior across every operating condition. Confirm control thresholds, switch configuration, on-resistance, leakage, signal capacitance, supply limits, and absolute maximum ratings for the selected replacement. The ISL84543IB is characterized over -40 °C to +85 °C, but connector transients and exposed test nodes can exceed the switch's limits. Add appropriate protection and verify the control sequence during power-up and power-down.
Operate the switch from a clean single supply within the 2.7 V to 12 V range. Decouple the supply close to the device with the capacitance and layout recommended by Renesas, and keep switch-node transients away from the supply pins where practical. The analog-switch path itself does not require the thermal SOA analysis used for power transistors, but long trace resistance, inadequate return paths, and supply disturbances can still degrade switching performance and measured signal integrity.
Impormasyon ng Pagsunod sa Kautusan
RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the current Renesas product documentation or supplier declarations.