LC4256C-5T176I - 256-Macrocell 5ns CPLD | Lattice
MPN: LC4256C-5T176I ✗ Tapus ng BuhayLC4256C-5T176I Ulas
A complex programmable logic device, or CPLD, is a programmable semiconductor that combines nonvolatile logic, programmable interconnect, and configurable input and output blocks. In the product hierarchy, a CPLD is a programmable logic device, a semiconductor, and a programmable-logic alternative to masked-programmable or FPGA implementations. Its electrically erasable configuration memory allows the logic design to be reprogrammed in the circuit without replacing the device.
The LC4256C provides 256 macrocells and 128 user I/O pins in a dense package, making it suitable for consolidating fixed control logic, interface adaptation, and state-machine logic. Its 5 ns maximum propagation delay supports general-purpose digital systems requiring predictable combinational timing. In-system programmability simplifies production configuration, field updates, and prototype revisions when a suitable programming interface is included in the design.
The ispMACH 4000 architecture blends the ispLSI 2000 and ispMACH 4A design characteristics. This family combines a high-density CPLD structure with in-system programming and selectable low-voltage supply options. The exact input and output voltage ratings, current limits, configuration timing, and package dimensions should be checked in the manufacturer datasheet before a new design is released.
Typical uses include industrial control and automation, communications-interface logic, test and measurement equipment, embedded system control, and general-purpose glue logic. The 176-pin TQFP package provides more I/O capacity than smaller CPLD packages, while the 256-macrocell architecture offers more logic density than small control-oriented devices. These characteristics are useful when a design must consolidate several discrete glue-logic functions.
Designers should preserve the power, ground, and programming-signal connections specified by the package and datasheet, and should account for signal transition rates, external pull resistors, decoupling, and unused I/O behavior. Because the exact pin names and device timing limits are not reproduced on this page, use the pin-description and timing tables in the manufacturer datasheet when assigning PCB tracks and constraining the logic design.
This page combines the confirmed device architecture, package, I/O count, macrocell count, timing class, and programming characteristics with engineering guidance for logic integration, package reuse, sourcing, and drop-in replacement assessment.
Mga alternatibo na pwedeng ilagay na LC4256C-5T176I — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok LC4256C-5T176I (parehas na form factor at footprint) — pagkakaiba sa Device Type.
LC4256C-5TN176I
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
LC4256C-5T176C
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →LC4256C-3T176C
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →LC4256C-3T176I
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
LC4256C-75T176C
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
LC4256C-5T176I Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | In-system programmable high-density CPLD |
| Product Family | ispMACH 4000C |
| Macrocell Count | 256 macrocells |
| Maximum Pin-to-Pin Propagation Delay | 5 ns |
| User I/O Count | 128 I/O pins |
| Packhaging | 176-pin TQFP |
| Uri ng Pagpapasok | Surface mount |
| Programming | In-system programmable |
| Supported Supply Environments | 3.3 V, 2.5 V, and 1.8 V |
| Internal Supply Voltage Range | 1.65 V to 1.95 V |
| Architecture | Blend of ispLSI 2000 and ispMACH 4A architectures |
| Configuration Memory | Nonvolatile electrically erasable programmable configuration |
| Temperature Grade Indicator | Industrial-temperature suffix I |
Gabay sa Pin Configuration ng LC4256C-5T176I 176-pin tqfp
Pin configuration para sa LC4256C-5T176I (176-pin tqfp package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa LC4256C-5T176I.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
LC4256C-5T176I ay nararapat para sa 6 aplikasyons: Industrial Automation Control, Communications Interface Consolidation, Test and Measurement Equipment, Embedded System Control, Security and Access Control, General-Purpose Interface Bridge.
Industrial Automation Control
The LC4256C-5T176I fits centralized industrial control logic because its 256 macrocells can implement multiple state machines, interlocks, command decoders, and I/O conditioning blocks without requiring a larger FPGA. Its 128 user I/O pins provide substantial connectivity for discrete sensors, actuator drivers, and operator-interface signals. The 5 ns propagation-delay class also supports timing-sensitive control paths when the design is constrained with the manufacturer timing models. The I suffix supports industrial-oriented sourcing, although the exact temperature range and qualification limits must be confirmed for the installed enclosure and production environment.
Inirekomenda
Communications Interface Consolidation
The LC4256C-5T176I is useful for consolidating communications front-end logic such as protocol conversion, framing, byte alignment, interrupt arbitration, and programmable I/O buffers. Its 256 macrocells offer more design capacity than small glue-logic devices, while 128 user I/O pins can support parallel buses and control signals. The in-system programming capability allows field updates when interface behavior changes. At the 5 ns speed class, routing and external interface timing must be checked carefully, particularly for high-speed edge-sensitive signals and long board traces.
Inirekomenda
Test and Measurement Equipment
In test and measurement equipment, the LC4256C-5T176I can implement acquisition sequencing, trigger logic, instrument bus control, status encoding, and front-panel state management. The 128 user I/O pins allow the instrument to combine control and data paths while retaining enough programmable logic for reusable subsystem blocks. Its nonvolatile, in-system-programmable configuration supports automated board test and firmware-oriented production updates. Timing-critical acquisition paths should use the complete datasheet timing tables, and sensitive analog or measurement circuitry should remain physically separated from fast switching outputs.
Inirekomenda
Embedded System Control
The LC4256C-5T176I can serve as the deterministic glue-logic layer between a processor, memory, sensors, and communications peripherals. Its 256 macrocells are suitable for bus arbitration, command pipelines, watchdog and reset sequencing, interrupt decoding, and peripheral address decoding, while the 128 user I/O pins provide broad interface capacity. The 5 ns class is useful where combinational decisions must occur quickly, but software timing margins should be calculated using actual path delays. The device also requires a compatible configuration source or programming interface for field and manufacturing support.
Inirekomenda
Security and Access Control
The LC4256C-5T176I can implement decentralized access-control logic, credential-state tracking, alarm encoding, keypad scanning, and communications handshaking. Its 128 user I/O pins support multiple discrete inputs and outputs, while 256 macrocells allow several related control functions to be consolidated into one programmable device. In-system programming can simplify configuration management and authorized field updates, provided that the programming channel is protected against unauthorized access. For safety-critical or security-certified installations, verify the device qualification, environmental ratings, and applicable system requirements separately.
Inirekomenda
General-Purpose Interface Bridge
The LC4256C-5T176I is appropriate for legacy interface bridging between dissimilar parallel buses, legacy peripheral buses, and newer digital subsystems. Programmable interconnect and 128 user I/O positions allow bidirectional, registered, or combinational translation functions to be consolidated in a 176-pin package. The 5 ns speed class supports many control-oriented bridge functions, though external transceiver direction control and protocol timing must be verified. A migration to an FPGA should be considered when dynamic reconfiguration, substantially higher logic density, or high-speed serial interfaces are required.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for LC4256C-5T176I — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | LC4256C-5TN176I | LC4256C-5T176C | LC4256C-3T176C | LC4256C-3T176I | LC4256C-75T176C |
|---|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | TQFP-176 | TQFP-176 - same | TQFP-176 - same | TQFP-176 - same | TQFP-176 - same | TQFP-176 - same |
| Macrocell Count | 256 macrocells | 256 macrocells | 256 macrocells | 256 macrocells | 256 macrocells | 256 macrocells |
| User I/O Count | 128 I/O pins | 128 I/O pins | 128 I/O pins | 128 I/O pins | 128 I/O pins | 128 I/O pins |
| Maximum Pin-to-Pin Propagation Delay | 5 ns | 5 ns | 5 ns | 3 ns | 3 ns | 7.5 ns |
| Programming | In-system programmable | In-system programmable | In-system programmable | In-system programmable | In-system programmable | In-system programmable |
| Product Family | ispMACH 4000C | ispMACH 4000C | ispMACH 4000C | ispMACH 4000C | ispMACH 4000C | ispMACH 4000C |
| Supported Supply Environments | 3.3 V, 2.5 V, and 1.8 V | 3.3 V, 2.5 V, and 1.8 V | 3.3 V, 2.5 V, and 1.8 V | 3.3 V, 2.5 V, and 1.8 V | 3.3 V, 2.5 V, and 1.8 V | 3.3 V, 2.5 V, and 1.8 V |
Pangunahing mga Pagkakaiba
- Combines 256 macrocells with 128 user I/O pins in one legacy CPLD (kumpara saLC4256C-5T176C)
- Faster timing option within the same footprint (kumpara saLC4256C-75T176C)
- Retains a 5 ns speed class while changing the ordering suffix (kumpara saLC4256C-5TN176I)
Talaan ng Disenyo
Do not treat a shared 176-pin package as proof of drop-in compatibility. Before substituting a family member, compare the numbered user-I/O positions, power and ground pins, configuration pins, speed grade, and temperature suffix. The LC4256C-5TN176I is the closest indexed family candidate, but its N suffix and qualification details must be confirmed. A board redesign is required if any fixed-function pin changes.
Assign the PCB using the manufacturer package drawing and pin-description table rather than a generic 176-pin symbol. Preserve the recommended power and ground connections, place configuration-access circuitry where it does not interfere with user signals, and route high-speed edges as short as practical. The 176-lead TQFP footprint also requires careful fan-out through dense two-layer boards; use the package-specific land pattern and thermal-via arrangement.
Decouple each applicable supply rail using the capacitor values and placement specified by the manufacturer, and verify whether the selected 3.3 V, 2.5 V, or 1.8 V supply configuration changes pin connections or timing. Check output-drive and input-threshold limits before attaching external signals. Do not infer current capability from the supply-environment description; use the complete electrical characteristics table for the exact ordering code.
The 5 ns propagation-delay class does not guarantee 5 ns system-level timing. Constrain complete logic paths, including I/O delay, setup, hold, and external round-trip delay, and account for package and PCB variation. Slow-edge inputs should use damping or series termination where required. Treat unused I/O according to the datasheet because leaving a general-purpose input floating can cause unpredictable switching and additional current.
Impormasyon ng Pagsunod sa Kautusan
The indexed product information identifies the part as an industrial-temperature CPLD but does not provide explicit RoHS, REACH, halogen-free, lead-free, conflict-minerals, or automotive-qualification statements. Compliance must be confirmed for the exact lot and manufacturer documentation.