LM201ADR2G - 1MHz Decompensated Op Amp | onsemi
MPN: LM201ADR2G ✓ NakahandaLM201ADR2G Ulas
An operational amplifier is an analog signal-processing IC that amplifies the voltage difference between its inverting and non-inverting inputs. It belongs to the amplifier hierarchy, which includes instrumentation amplifiers, buffer amplifiers, precision amplifiers, and general-purpose op amps. Feedback and external compensation components determine the closed-loop response, making the LM201ADR2G useful where standard fixed compensation would not provide the required bandwidth or speed.
Key characteristics include a 1 MHz gain-bandwidth product, 30 nA input offset current, 1.5 nA input bias current, and 700 uV input offset voltage. Common-mode rejection reaches 96 dB, while typical supply current is 1.8 mA. The Class AB output stage supports symmetrical output swing and is intended for analog signal-conditioning circuits. With an appropriate external compensation capacitor, the manufacturer documents summing-amplifier slew rates of up to 10 V/us.
The decompensated architecture distinguishes this amplifier from unity-gain-stable devices. The compensation capacitor connected to the compensation terminal determines whether the amplifier is stable at a selected closed-loop gain. Designers must therefore verify both gain and phase margin before committing the external network to a PCB layout.
Typical applications include precision summing and difference amplifiers, laboratory instrumentation, low-frequency active filters, transducers with high source impedance, and general industrial analog interfaces. The 20 nA maximum low input offset current and 1.5 nA input bias current are particularly useful when minimizing current-induced error is more important than maximizing closed-loop bandwidth.
The main design trade-off is compensation complexity. A correctly selected external capacitor can unlock substantially higher slew rate than the 0.5 V/us uncompensated value, but an incorrect capacitor may make the amplifier unstable at the intended gain. Use the manufacturer compensation charts and probe the completed circuit before production release.
This page consolidates the manufacturer-documented electrical characteristics, verified package information, drop-in family alternatives, comparison parameters, and practical compensation guidance into a design-focused reference for engineers selecting an externally compensated precision op amp.
Mga alternatibo na pwedeng ilagay na LM201ADR2G — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
LM201ADR2
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
LM201AVDR2G
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
LM201ADR2G Mga Pinakamataas na Rating at Electrical Characteristics
| Amplifier Type | General-purpose, single operational amplifier |
| Number of Channels | 1 channel |
| Architecture | Externally compensated, decompensated |
| Supply Voltage Range, Positive | +5 V to +20 V |
| Supply Voltage Range, Negative | -5 V to -20 V |
| Gain-Bandwidth Product | 1 MHz |
| Typical Slew Rate | 0.5 V/us |
| Maximum Slew Rate with Suitable Compensation | 10 V/us in summing-amplifier applications |
| Input Bias Current | 1.5 nA |
| Input Offset Current | 30 nA |
| Low Input Offset Current | 20 nA maximum over temperature range |
| Input Offset Voltage | 700 uV |
| Input Offset Voltage Temperature Coefficient | 3 uV/°C |
| Common-Mode Rejection Ratio | 96 dB |
| Typical Supply Current | 1.8 mA |
| Hanay ng Temperature na Operasyon | -25 °C to +85 °C |
| Output Stage | Class AB |
| Packhaging | 8-pin SOIC |
| Uri ng Pagpapasok | Surface mount |
| Tindminan RoHS | RoHS compliant |
Gabay sa Pin Configuration ng LM201ADR2G 8-pin soic
Pin configuration para sa LM201ADR2G (8-pin soic package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa LM201ADR2G.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
LM201ADR2G ay nararapat para sa 6 aplikasyons: Precision Summing Amplifier, High-Impedance Sensor Front End, Active Low-Frequency Filter, Laboratory Instrumentation Amplifier Stage, Precision Difference Amplifier, Industrial Analog Signal Conditioning.
Precision Summing Amplifier
The LM201ADR2G is well suited to a precision summing amplifier because its externally compensated architecture allows the designer to select the response for the intended closed-loop gain. Its 1.5 nA input bias current, 30 nA input offset current, and 700 uV input offset voltage help reduce errors when several scaled signals are combined. With suitable compensation, the manufacturer documents summing-amplifier slew rates up to 10 V/us. Verify the compensation capacitor against the target gain, load capacitance, and board parasitics before releasing the layout.
Inirekomenda
High-Impedance Sensor Front End
A high-impedance sensor front end benefits from the LM201ADR2G's low input current: 1.5 nA input bias current and a manufacturer-listed maximum low input offset current of 20 nA over the temperature range. These characteristics limit the bias-induced error across the sensor and feedback resistors while the 96 dB common-mode rejection helps reject common noise on the sensed signal. The circuit still requires a closed-loop gain-specific compensation network, and input capacitance at long sensor leads must be checked for stability.
Inirekomenda
Active Low-Frequency Filter
The LM201ADR2G can implement active low-frequency filters where component values need to be optimized around a known closed-loop gain. External frequency compensation provides flexibility that fixed-compensation amplifiers cannot offer, while the 1 MHz gain-bandwidth product gives adequate headroom for many precision filter stages operating below that frequency. The 700 uV input offset voltage and 3 uV/°C offset drift should be included in the error budget. Simulate gain and phase margin, then verify with a scope using the final layout.
Inirekomenda
Laboratory Instrumentation Amplifier Stage
The LM201ADR2G fits a laboratory input-conditioning stage where low input bias current, input protection characteristics, and flexible gain shaping are valuable. A 1.8 mA typical supply current supports power-constrained analog front ends, while Class AB output operation supports bidirectional signal handling around the quiescent level. Because the part is decompensated, the instrumentation block must define its closed-loop gain before the compensation capacitor is selected. Use the manufacturer stability information and probe both step and pulse response on the assembled board.
Inirekomenda
Precision Difference Amplifier
A precision difference amplifier can use the LM201ADR2G where the input common-mode range, offset voltage, and bias current are more important than a very high fixed gain-bandwidth product. The manufacturer lists 700 uV input offset voltage and 96 dB common-mode rejection, which support accurate subtraction of differential signals near the selected common-mode voltage. External compensation must match the feedback ratio, and resistor ratios should be chosen carefully to preserve matching. The supply rails should also leave sufficient output swing for the expected differential input.
Inirekomenda
Industrial Analog Signal Conditioning
The LM201ADR2G is applicable to industrial signal-conditioning blocks that process low-level analog inputs with a defined gain and moderate bandwidth. Its 1 MHz gain-bandwidth product, 30 nA input offset current, and 0.5 V/us typical slew rate support general-purpose conditioning stages, while the external compensation capacitor allows optimization for each stage. Confirm the -25 °C to +85 °C operating range against the enclosure temperature. Add input filtering and protection appropriate to the industrial environment without degrading the amplifier's stability.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for LM201ADR2G — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | LM201ADR2 | LM201AVDR2G |
|---|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Brand | onsemi | onsemi | onsemi |
| Amplifier Type | General-purpose, single operational amplifier | General-purpose, single operational amplifier | General-purpose, single operational amplifier |
| Compensation Method | External frequency compensation | External frequency compensation | External frequency compensation |
| Gain-Bandwidth Product | 1 MHz | 1 MHz | 1 MHz |
| Typical Slew Rate | 0.5 V/us | 0.5 V/us | 0.5 V/us |
| Typical Supply Current | 1.8 mA | 1.8 mA | 1.8 mA |
| Input Bias Current | 1.5 nA | 1.5 nA | 1.5 nA |
| Input Offset Voltage | 700 uV | 700 uV | 700 uV |
| Common-Mode Rejection Ratio | 96 dB | 96 dB | 96 dB |
Pangunahing mga Pagkakaiba
- External compensation enables application-specific speed (kumpara saLM201ADR2)
- Low input current supports high-impedance sources (kumpara saLM201AVDR2G)
- Same-package family options limit redesign effort (kumpara saLM201ADR2)
Talaan ng Disenyo
Treat the compensation network as part of the closed-loop design, not as an optional trim. The 0.5 V/us slew rate is the baseline figure, while the manufacturer documents up to 10 V/us in a properly compensated summing amplifier. Select the external capacitor for the intended gain, then verify phase margin on the assembled PCB with realistic loading and cable capacitance.
Route the compensation terminal with a short trace and place its capacitor close to the device to minimize parasitic inductance and capacitance. Keep feedback-resistor networks compact and isolate them from high-current switching paths. Because an 8-pin SOIC exposes short interconnect between pins, component placement and grounding can materially affect both stability and the attainable bandwidth.
Check source impedance and cable capacitance at the input because low bias current does not eliminate stability or settling-time problems. The 1.5 nA bias current is favorable for high-impedance sources, but long sensor wiring can still introduce capacitance that interacts with the compensation network. Add filtering at the input only after confirming that the added impedance and capacitor do not compromise the intended closed-loop response.
Bypass each supply connection with a short local ceramic-to-ground path and provide adequate output-current margin for the load. The typical supply current is 1.8 mA, but output-current demand, compensation-network loss, and regulator tolerance determine the actual requirement. Keep the compensation capacitor's return path short because long supply or ground loops can degrade phase margin.
Impormasyon ng Pagsunod sa Kautusan
The JLCPCB product record marks the LM201ADR2G as RoHS compliant. No separate REACH, AEC-Q100, halogen-free, or conflict-minerals declaration was identified for this exact ordering code.