LM2901VN - Quad 36V Comparator | onsemi | Through-Hole
MPN: LM2901VN ✓ NakahandaLM2901VN Ulas
A voltage comparator is an analog integrated circuit that compares two input voltages and produces a logic-level indication of their relationship. The comparator belongs to the broader signal-conditioning and interface hierarchy: voltage comparator, analog interface IC, semiconductor, and electronic component. Each LM2901VN channel provides inverting and non-inverting inputs, an output, and access to the ground reference. Its open-collector outputs allow wired-OR operation and require an external pull-up resistor when driving a logic input.
Key features include four independent comparison channels in one package, operation from 3 V to 36 V, open-collector sinking capability, and a common-mode input voltage range that includes ground. The package is a 14-pin through-hole PDIP. Because the outputs are open collector, engineers can choose the pull-up voltage independently of the comparator supply when logic-interface requirements differ, while ensuring that the selected resistor and output transistor stay within their current limits.
The LM2901VN provides the familiar LM2901 channel arrangement, with each comparator using separate input and output pins. Its monolithic construction places four independent channels on one substrate, reducing component count in designs that require multiple threshold, window, overvoltage, or undervoltage decisions. The wide operating supply range supports both low-voltage logic rails and higher-voltage industrial or automotive systems when the associated input and output ratings are respected.
Typical uses include power-supply sequencing, battery monitoring, motor-control feedback, sensor threshold conditioning, industrial control logic, and automotive signal comparison. In a power-supply circuit, one channel can monitor a feedback-derived voltage against a reference while another channel supervises another rail. In a motor-control application, the comparator can evaluate a scaled current or position signal before driving a control transistor through an external interface stage.
Designers should verify input and output voltage limits for the specific operating condition, account for the open-collector pull-up network, and ensure logic compatibility with the driven device. A pull-up resistor sets rise time and current, so it should be selected from the required sink-current and propagation-delay limits. Breadboard and prototype layouts should keep each comparator's input path short and away from noisy switching nodes to reduce false transitions.
This product record combines the LM2901VN device identity, verified 3 V to 36 V and 14-pin PDIP characteristics, package-specific replacement guidance, comparison parameters, and practical circuit-design guidance. It is intended to support component selection, PCB-level replacement decisions, and application design without obscuring the differences between same-family and cross-manufacturer alternatives.
Mga alternatibo na pwedeng ilagay na LM2901VN — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok LM2901VN (parehas na form factor at footprint) — pagkakaiba sa Comparator Type, Logic Compatibility, Mounting Type, Package, RoHS Status.
LM2901N
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →LM2901N
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →LM2901A
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
LM2901VN Mga Pinakamataas na Rating at Electrical Characteristics
| Comparator Type | Quad differential voltage comparator |
| Number of Channels | 4 channels |
| Supply Voltage Range | 3 V to 36 V |
| Maximum Supply Voltage | 36 V |
| Volte ng Pagbibigay | ±18 V or 36 V total |
| Type ng Output | Open collector |
| Packhaging | 14-pin PDIP |
| Uri ng Pagpapasok | Through-hole |
| Common-Mode Input Range | Includes ground |
| Logic Compatibility | TTL, MOS, and CMOS compatible |
| Differential Input Voltage | ±38 V maximum-rated range |
| Tindminan RoHS | Compliant |
Pin Configuration ng LM2901VN
| Pin 1 | OUT1 — Comparator 1 open-collector output |
| Pin 2 | IN1- — Comparator 1 inverting input |
| Pin 3 | IN1+ — Comparator 1 non-inverting input |
| Pin 4 | GND — Ground reference |
| Pin 5 | IN2+ — Comparator 2 non-inverting input |
| Pin 6 | IN2- — Comparator 2 inverting input |
| Pin 7 | OUT2 — Comparator 2 open-collector output |
| Pin 8 | OUT3 — Comparator 3 open-collector output |
| Pin 9 | IN3- — Comparator 3 inverting input |
| Pin 10 | IN3+ — Comparator 3 non-inverting input |
| Pin 11 | GND — Comparator 3 ground reference |
| Pin 12 | IN4+ — Comparator 4 non-inverting input |
| Pin 13 | IN4- — Comparator 4 inverting input |
| Pin 14 | OUT4 — Comparator 4 open-collector output |
Tipikal na mga Gamit
LM2901VN ay nararapat para sa 6 aplikasyons: Power-Supply Sequence Control, Battery Threshold Monitoring, Industrial Sensor Conditioning, Motor and Solenoid Feedback, Automotive Voltage Detection, Overvoltage and Undervoltage Protection.
Power-Supply Sequence Control
The LM2901VN fits multi-rail power-supply sequencing because four independent channels can compare scaled feedback voltages against reference thresholds. Each channel may monitor a different rail, while its open-collector output drives an enable, fault, or relay-control input through a pull-up resistor. The 3 V to 36 V supply range accommodates both low-voltage logic and higher industrial rails. The key design consideration is resistor-divider accuracy: input offset and reference tolerances directly affect the point at which each rail is declared in sequence. Keep the divider impedance high enough to limit loading but low enough to avoid excessive noise sensitivity.
Inirekomenda
Battery Threshold Monitoring
LM2901VN can monitor battery-pack voltage by comparing a divided battery voltage with a reference on the non-inverting and inverting inputs. The common-mode range including ground is useful for detecting low-voltage or near-zero conditions, while the wide 3 V to 36 V operating supply supports industrial and automotive battery systems. Four channels allow separate checks for undervoltage, overvoltage, and redundant thresholds. Because the outputs are open collector, a pull-up can drive a fault latch or microcontroller input. Account for battery chemistry, divider tolerances, and input transients when defining the switching thresholds.
Inirekomenda
Industrial Sensor Conditioning
The LM2901VN converts a conditioned analog sensor signal into a logic decision when the signal crosses a defined threshold. It is suitable for industrial limit detectors because each channel is independent, the common-mode input range includes ground, and the device supports operation from 3 V to 36 V. A sensor amplifier or divider can feed one input while a precision reference drives the other. The open-collector output requires a pull-up resistor, whose value sets edge speed and load current. Place the comparison network away from motor-switching nodes and use guarding or filtering if the sensor lead is long.
Inirekomenda
Motor and Solenoid Feedback
LM2901VN can detect motor-current, position, or solenoid-state feedback by comparing a scaled sensing signal with a threshold. The comparator provides a direct logic-level fault indication when the feedback exceeds the intended operating region, while its 36 V-class supply capability supports systems with protected battery or industrial rails. Open-collector outputs are useful for driving a protection input or relay-driver stage, although an external transistor may be needed for higher current. Keep sensing and power paths separated because high-dV/dt switching can couple into high-impedance input networks.
Inirekomenda
Automotive Voltage Detection
LM2901VN is suitable for automotive voltage-detection functions when the exact ordering variant satisfies the required temperature, shock, and qualification specifications. Four channels can evaluate multiple battery or signal thresholds, and the common-mode input range including ground supports low-voltage detection. The 3 V to 36 V supply range accommodates protected vehicle electrical environments, but transient protection remains essential. Use a suitable automotive-rated external network and verify the AEC-Q100 status of the precise part before release. Open-collector outputs simplify connection to protected logic inputs through a pull-up.
Inirekomenda
Overvoltage and Undervoltage Protection
The LM2901VN can implement independent overvoltage and undervoltage protection functions by comparing divided rail voltages against references. Two channels can protect one supply in both directions, while the remaining channels supervise another rail or generate a combined fault signal. Its open-collector outputs allow wired-OR fault collection when each output has an appropriate pull-up. The 3 V to 36 V operating range provides flexibility across low-voltage logic and industrial systems. Validation should cover resistor tolerances, comparator offset, threshold temperature drift, and the timing of the downstream protection actuator.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for LM2901VN — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | LM2901N | LM2901N | LM2901A |
|---|---|---|---|---|
| Brand | onsemi | Texas Instruments | STMicroelectronics | 3PEAK |
| Package | 14-pin PDIP | 14-pin PDIP | 14-pin PDIP | 14-pin PDIP |
| Comparator Configuration | Quad | Quad | Quad | Quad |
| Output Type | Open collector | Open collector | Open collector | Open collector |
| Mounting Type | Through-hole | Through-hole | Through-hole | Through-hole |
| Single-Supply Operation | Supported | Supported | Supported | Supported |
Pangunahing mga Pagkakaiba
- Combines four independent comparator channels in one through-hole package (kumpara saLM2902N/PB)
- Supports a 3 V to 36 V operating supply (kumpara saLM2901A)
- Uses a conventional 14-pin PDIP footprint for through-hole compatibility (kumpara saLM2904PWR)
- Ground-inclusive common-mode input supports near-zero threshold detection (kumpara saLM2901N from STMicroelectronics)
Talaan ng Disenyo
Each LM2901VN output is open collector and must have a pull-up resistor. Select the pull-up voltage for the driven logic, then choose the resistance from the required output sink current and maximum transition speed. A smaller pull-up improves rise time but increases current and dissipation in the output transistor. Verify that the pull-up supply remains within the device's output-node limits and that the resulting high level meets the receiver's input threshold.
Keep comparator inputs short and route them away from switching-node copper, relay contacts, and high-current motor traces. For long sensor connections, use a grounded guard or differential filtering stage before the comparator. The 14-pin PDIP footprint allows short direct connections, but the two GND pins should both be connected to a low-impedance ground plane. Incorrect DIP orientation or an unconnected GND pin can produce unstable or misleading threshold behavior.
Do not treat a generic LM2901-family name as proof of drop-in compatibility. Confirm the manufacturer's suffix, 14-pin PDIP package, channel-by-channel pinout, supply rating, common-mode range, output current, and temperature grade. Do not substitute a 14-pin SOIC device on a PDIP footprint because the lead pitch differs. Also ensure that any candidate's output architecture remains open collector; a push-pull or fail-safe output can alter bus behavior and logic levels even when the comparator function appears equivalent.
Impormasyon ng Pagsunod sa Kautusan
RoHS compliance is stated by the manufacturer product listing. The other compliance attributes remain unknown because the available product information does not explicitly establish them.