NXP Semiconductors

LPC11U12FHN33/201 - 50MHz USB Cortex-M0 MCU | NXP

MPN: LPC11U12FHN33/201 ✓ Nakahanda
HVQFN-32, 7 x 7 mm Package 50 MHz Speed 16 KB Memory
MOQ: 1 |

LPC11U12FHN33/201 Ulas

The NXP LPC11U12FHN33/201 is a 32-bit ARM Cortex-M0 microcontroller operating up to 50 MHz, with 16 KB of flash memory, 6 KB of SRAM, and USB-device connectivity in a 32-pin HVQFN package measuring 7 x 7 mm. It combines a compact ARM-based control core with serial peripherals suited to low-cost embedded products.

A microcontroller is a programmable semiconductor that integrates a processor core, program memory, data memory, and peripherals on one integrated circuit. The LPC11U12FHN33/201 belongs to the LPC11Uxx low-cost MCU family, whose architecture is intended to replace conventional 8-bit and 16-bit designs with a 32-bit instruction set, improved code efficiency, and integrated USB and serial communications.

The device provides 16 KB of flash for firmware and 6 KB of SRAM for working data. Its stated peripherals include I2C, Microwire, SPI, SSP, UART/USART, and USB. This combination supports compact data-acquisition, metering, communications, alarm, lighting, and consumer-peripheral designs without requiring a separate USB interface IC.

At a maximum clock frequency of 50 MHz, the Cortex-M0 core provides deterministic control for interrupt-driven and event-based peripherals. The 32-bit register architecture and compact ARM instruction set help reduce software overhead while retaining a straightforward programming model. Arm Keil identifies the part under the LPC1100 device family and CMSIS Pack LPC1100_DFP, supporting development with compatible ARM toolchains.

The LPC11U12FHN33/201 is suitable for USB-connected accessories, energy-metering peripherals, LED-control systems, alarm equipment, industrial sensing nodes, and consumer peripherals. The integrated USB device controller is especially useful for configuration, logging, diagnostics, or firmware connectivity where a compact board area is more important than high data throughput.

PCB design should preserve short USB traces, controlled return paths, and proper decoupling near each supply pin. Firmware must also account for USB enumeration, clock initialization, peripheral pin multiplexing, and the limited 6 KB SRAM. Before releasing a design, verify the complete pin assignment, exposed-pad connection, and electrical requirements in the NXP manufacturer documentation for the exact ordering code.

This page consolidates the exact LPC11U12FHN33/201 identity, memory and interface characteristics, package information, sourcing guidance, and design considerations into an engineering-focused reference for PCB, firmware, and procurement planning.

Mga alternatibo na pwedeng ilagay na LPC11U12FHN33/201 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

LPC11U12FHN33/201K

✅ Drop-In
📦 HVQFN-32, 7 x 7 mm
Same 50 MHz Cortex-M0 core, 16 KB flash, and 6 KB SRAM; the /201K suffix specifies a different orderable packaging arrangement

📋 Alternatibo na Reference (hindi sa katalogo)

LPC11U12FHN33

✅ Drop-In
📦 HVQFN-32, 7 x 7 mm
Base NXP orderable designation with the same 50 MHz Cortex-M0 core, 16 KB flash, and 6 KB SRAM configuration

📋 Alternatibo na Reference (hindi sa katalogo)

LPC11U12FHN33/201 Mga Pinakamataas na Rating at Electrical Characteristics

Product Type 32-bit ARM microcontroller
Processor Core Arm Cortex-M0
Maximum CPU Frequency 50 MHz
Word Size 32 bit
Flash Memory 16 KB
Flash Organization 16K x 8 bit
SRAM 6 KB
USB Connectivity USB device controller
Serial Interfaces I2C, Microwire, SPI, SSP, UART/USART
Packhaging HVQFN-32, 7 x 7 mm
Bilang ng Pin 32 pins
Uri ng Pagpapasok Surface mount
Process Technology CMOS
Development Device Family Pack CMSIS Pack LPC1100_DFP

Gabay sa Pin Configuration ng LPC11U12FHN33/201 hvqfn-32, 7 x 7 mm

Pin configuration para sa LPC11U12FHN33/201 (hvqfn-32, 7 x 7 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng hvqfn-32, 7 x 7 mm package para sa LPC11U12FHN33/201

Wala ng detalyadong pinout data na magagamit para sa LPC11U12FHN33/201.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

LPC11U12FHN33/201 ay nararapat para sa 6 aplikasyons: USB Configuration Adapter, Smart Energy Metering Peripheral, Industrial Sensor Node, LED Lighting Controller, Alarm and Security Peripheral, USB Data Logger.

🔌

USB Configuration Adapter

The LPC11U12FHN33/201 fits a USB configuration adapter because its 50 MHz Cortex-M0 core can process USB device tasks while its 16 KB flash stores interface firmware and its 6 KB SRAM supports short protocol buffers. I2C, SPI, UART/USART, SSP, and Microwire peripherals allow the same controller to communicate with configuration storage, sensors, or downstream equipment. Use the MCU between the USB connector data lines and the target interface, with controlled impedance routing and correct connector power handling. The principal trade-off is limited RAM, so protocol buffers and USB descriptors should be sized during firmware planning.

⚡

Smart Energy Metering Peripheral

The LPC11U12FHN33/201 can serve as the controller for a compact metering peripheral by combining a 50 MHz ARM Cortex-M0 core with 16 KB flash and 6 KB SRAM. UART/USART can connect to a metering front end, while I2C or SPI supports sensors, memory, or a display controller. The low-cost 32-pin HVQFN footprint also helps limit board area in a secondary metering unit. Firmware must remain within the 16 KB code limit and should avoid allocating large nonvolatile data buffers in the 6 KB SRAM. This use is appropriate when the design requires local measurement processing and USB or serial export rather than a large application ecosystem.

🏭

Industrial Sensor Node

The LPC11U12FHN33/201 is appropriate for a small industrial sensor node that must combine local control with several low-speed peripherals. The 50 MHz Cortex-M0 core handles interrupts, filtering, and communication tasks, while I2C and SPI support common sensors and SPI flash. The 32-pin HVQFN package reduces board footprint, although it requires careful exposed-pad land design and production inspection. Keep analog and digital return paths separated, place decoupling close to supply pins, and validate industrial temperature requirements for the exact ordering code. The memory limits favor lightweight calibration and logging functions rather than large local histories.

💡

LED Lighting Controller

The LPC11U12FHN33/201 can control compact LED lighting modules by using its 50 MHz processing speed for PWM timing, status logic, and communication updates. I2C or SPI can connect to LED drivers, while UART/USART supports remote control and diagnostics. Its 16 KB flash is adequate for focused lighting patterns and configuration code, and the 7 x 7 mm HVQFN package helps minimize controller-board area. Designers should confirm the exact PWM-capable pins and alternate functions before fixing the PCB. For multichannel systems, external driver ICs remain appropriate when the MCU must supervise more channels or enforce current limits beyond its direct GPIO capability.

🛡️

Alarm and Security Peripheral

The LPC11U12FHN33/201 suits a compact alarm or security peripheral where low cost, local response, and communication flexibility matter. The Cortex-M0 core can evaluate sensor inputs, manage a status LED, and handle configuration commands, while I2C, SPI, UART/USART, and USB support different peripheral and service connections. The 32-pin HVQFN footprint supports dense boards, and the 6 KB SRAM is adequate for event flags and short message buffers. Firmware should include secure boot, authenticated updates, and input debouncing as required by the system. Exact GPIO count and temperature limits must be confirmed before using the MCU in a certified outdoor installation.

🖥️

USB Data Logger

The LPC11U12FHN33/201 can act as a compact USB data logger for short records, configuration logs, and device diagnostics. Its 50 MHz core manages acquisition interrupts and USB device service, while 16 KB flash can hold a bootloader, configuration logic, and a small nonvolatile log. The integrated I2C, SPI, UART/USART, and SSP interfaces allow sensors or external storage to feed the logger without a separate bus controller. Designers should establish a bounded buffering strategy because only 6 KB SRAM is available, and should avoid placing high-volume logging requirements on flash without accounting for erase endurance. A larger MCU is preferable when continuous high-rate capture is central to the product.

What is the operating frequency of LPC11U12FHN33/201?
The LPC11U12FHN33/201 operates at up to 50 MHz using an Arm Cortex-M0 core. According to the NXP LPC11U12FHN33 product information, the LPC11Uxx family is designed for low-cost 8-bit and 16-bit replacement applications and combines a 32-bit processor with low-power operation and a compact instruction set. Its 50 MHz clock is suitable for responsive control, USB communication, data logging, and peripheral management without requiring a higher-performance Cortex-M processor.
How much flash and SRAM does LPC11U12FHN33/201 have?
The LPC11U12FHN33/201 contains 16 KB of flash memory and 6 KB of SRAM. NXP describes the flash as 16K x 8 bits, while the product information identifies the device as an ARM Cortex-M0 microcontroller for compact embedded systems. The 16 KB flash capacity is best suited to firmware with tightly controlled feature sets, while the 6 KB SRAM requires attention to buffer sizing, stack depth, and DMA-compatible data handling.
Does LPC11U12FHN33/201 include USB?
Yes, the LPC11U12FHN33/201 includes a USB device controller. The manufacturer product information and technical listings identify USB connectivity alongside I2C, Microwire, SPI, SSP, and UART/USART. This makes the MCU suitable for USB-connected configuration ports, diagnostic links, data loggers, control accessories, and low-bandwidth peripherals. USB implementation still requires careful PCB routing, compliant connector design, power selection, and firmware handling of enumeration.
What package does LPC11U12FHN33/201 use?
The LPC11U12FHN33/201 uses a 32-pin HVQFN package measuring 7 x 7 mm. The package is a surface-mount QFN-style form factor with an exposed thermal pad that must be connected according to the manufacturer land pattern. Because it is not a leaded package, PCB assembly requires suitable land geometry, paste control, reflow profiling, and adequate copper for heat dissipation. Use the exact ordering code when checking the exposed-pad net assignment.
Where can I download the LPC11U12FHN33/201 datasheet PDF?
The LPC11U12FHN33/201 datasheet should be obtained from the official NXP product page at https://www.nxp.com/part/LPC11U12FHN33. NXP’s device documentation provides the authoritative pin descriptions, electrical limits, clock requirements, memory map, USB characteristics, and recommended application circuits. Third-party document repositories can aid discovery, but the NXP document should be used for production design decisions, particularly because exposed-pad and ordering-code details must match the exact device.
Where can I find the LPC11U12FHN33/201 pinout?
The LPC11U12FHN33/201 pinout is identified in the NXP manufacturer documentation associated with the official LPC11U12FHN33 product page. Use the pin-description table and package drawing together when assigning the 32 HVQFN contacts. Pin multiplexing should also be checked in the IOMUX documentation because several peripheral functions can share the same external contact. The exposed thermal pad is not a normal GPIO and must be connected to the specified power or ground net.
What can replace the LPC11U12FHN33/201?
The closest documented orderable equivalent is LPC11U12FHN33/201K, which retains the 50 MHz Cortex-M0 core, 16 KB flash, 6 KB SRAM, and 32-pin HVQFN package. Its distinguishing suffix concerns orderable packaging, so engineers should verify reel-versus-tray handling and assembly logistics before substitution. Firmware compatibility also depends on device revision, USB implementation, clock configuration, and peripheral pin mapping; the manufacturer documentation and programming configuration remain controlling references.
Is LPC11U12FHN33/201 the same as LPC11U12FHN33/201K?
They are closely related NXP orderable versions with the same stated 50 MHz Cortex-M0 core, 16 KB flash, 6 KB SRAM, and HVQFN-32 package, but their suffix codes specify different orderable packaging arrangements. Listings distinguish LPC11U12FHN33/201 from LPC11U12FHN33/201K, with the latter shown in tray packaging. For a physical drop-in decision, confirm the reel or tray configuration, pinout, exposed-pad treatment, and marking requirements without changing the PCB footprint.
LPC11U12FHN33/201 vs LPC11U12FHN33/201K — which is better for production?
Choose LPC11U12FHN33/201 or LPC11U12FHN33/201K according to the assembly logistics required by your production line. Both listings identify the same core speed of 50 MHz, 16 KB flash, 6 KB SRAM, and 32-pin HVQFN package. The difference is the orderable packaging suffix rather than a change in processor performance. Confirm whether your facility receives tape-and-reel or tray presentation, then use the NXP ordering information to prevent shipment and labeling mismatches.
When should I choose LPC11U12FHN33/201 over a larger Cortex-M MCU?
Choose LPC11U12FHN33/201 when the design needs 50 MHz processing, 16 KB flash, 6 KB SRAM, USB device connectivity, and a compact 32-pin HVQFN footprint without the memory overhead of a larger MCU. It is well suited to focused accessories, metering peripherals, alarm systems, lighting controllers, and compact consumer products. Select a larger MCU if firmware growth, deep buffering, higher pin count, wider voltage range, or more demanding real-time processing is expected.
Is LPC11U12FHN33/201 suitable for a USB-connected sensor node?
The LPC11U12FHN33/201 is suitable for a compact USB-connected sensor node when the application fits within 16 KB flash and 6 KB SRAM. Its 50 MHz Cortex-M0 core can service interrupts, sample-control logic, and USB device tasks, while I2C, SPI, and UART/USART support common sensor and external-device connections. The principal limits are memory capacity, available GPIO, and the exact peripheral multiplexing of each HVQFN pin, which should be verified before layout release.
What tools support LPC11U12FHN33/201 development?
Arm Keil supports LPC11U12FHN33/201 through the LPC1100 device family and CMSIS Pack LPC1100_DFP, as shown on the processor page for the exact part. This support provides device definitions for an ARM-compatible development environment. Production firmware should still be configured for the actual clock source, USB implementation, memory map, and package pins. Validate startup code, linker placement, peripheral instances, and any USB descriptors against the NXP device documentation.
Is LPC11U12FHN33/201 available for a new design?
The LPC11U12FHN33/201 is listed with active inventory and a quoted commercial channel, indicating current sourcing availability at the verification date. For a production design, use the Request a Quote form on this page to confirm current stock, minimum order quantity, lead time, and orderable packaging. Because microcontroller sourcing can fluctuate by package and delivery format, request those four items together before committing the manufacturing schedule.
Where can I buy LPC11U12FHN33/201 and what is its lead time?
Use the Request a Quote form on this page for LPC11U12FHN33/201 availability, current commercial terms, and lead-time confirmation. The form allows procurement to specify the required quantity and package-delivery format without relying on a stale catalog figure. For production planning, request the manufacturer ordering code, date code, packaging presentation, and shipment schedule together because these details affect assembly and obsolescence risk.
What is the price of LPC11U12FHN33/201?
The current commercial price for LPC11U12FHN33/201 should be requested through the Request a Quote form on this page. Submit the required quantity and preferred orderable packaging so procurement can confirm the applicable supply conditions. Do not use a generic minimum-unit figure as the budget basis, because reel quantity, tray presentation, date code, and shipment quantity can change the final commercial result.
What are the key specifications of LPC11U12FHN33/201 that engineers should know?
The key specifications are a 50 MHz Arm Cortex-M0 core, 16 KB flash, 6 KB SRAM, USB device support, and a 32-pin 7 x 7 mm HVQFN package. NXP also identifies I2C, Microwire, SPI, SSP, and UART/USART connectivity. The MCU is designed for low-cost 8-bit and 16-bit replacement applications and is supported by the LPC1100 CMSIS device pack. Memory capacity, exposed-pad layout, and exact pin multiplexing are the primary design constraints.

Impormasyon ng Talumpati sa Engineering for LPC11U12FHN33/201 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose LPC11U12FHN33/201 for a compact embedded product that needs a 50 MHz Arm Cortex-M0 core, 16 KB flash, 6 KB SRAM, USB device connectivity, and a 7 x 7 mm HVQFN footprint. It is especially attractive for configuration adapters, metering peripherals, sensor nodes, alarm devices, lighting controllers, and short-record USB data loggers where code size and board area are tightly constrained. Choose LPC11U12FHN33/201K when the documented tray presentation better matches your assembly process; its core, memory, and package ratings match the target. The base LPC11U12FHN33 ordering designation is useful when supply-chain planning calls for the broader manufacturer orderable device. Select a larger MCU instead when firmware, SRAM, ADC performance, GPIO count, temperature range, or real-time processing exceeds the capabilities of this compact Cortex-M0 platform.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto LPC11U12FHN33/201K LPC11U12FHN33
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package HVQFN-32, 7 x 7 mm HVQFN-32, 7 x 7 mm HVQFN-32, 7 x 7 mm
Processor Core Arm Cortex-M0 Arm Cortex-M0 Arm Cortex-M0
Maximum CPU Frequency 50 MHz 50 MHz 50 MHz
Flash Memory 16 KB 16 KB 16 KB
SRAM 6 KB 6 KB 6 KB
Architecture 32-bit 32-bit 32-bit
USB Support USB device controller USB device controller USB device controller
Serial Interfaces I2C, Microwire, SPI, SSP, UART/USART I2C, Microwire, SPI, SSP, UART/USART I2C, Microwire, SPI, SSP, UART/USART

Pangunahing mga Pagkakaiba

  • USB integration reduces external interface overhead (kumpara saLPC11U12FHN33/201K)
  • Compact 50 MHz ARM control in a 32-pin package (kumpara saLPC11U12FHN33/201K)
  • Same electrical platform with orderable-code flexibility (kumpara saLPC11U12FHN33)

Talaan ng Disenyo

Assign the HVQFN exposed pad exactly as directed by the NXP package documentation and keep the pad connection short to the appropriate supply or ground plane. Place all decoupling capacitors close to the associated supply pins, with a small ceramic capacitor handling high-frequency transients and a bulk capacitor near the power entry point. Confirm the complete pin-to-supply assignment in the exact device documentation because the exposed pad is not a general-purpose GPIO.

Route the USB differential pair as a controlled-impedance pair with continuous reference-plane support, minimal stubs, and no unnecessary test pads or layer transitions. Keep the USB PHY and supporting clock paths away from switching nodes and noisy analog inputs. Decouple the USB supply locally and follow the connector, ESD, and capacitance recommendations in the device documentation. PCB placement and USB signal-path compliance should be reviewed using the actual stack-up before fabrication.

Do not treat the 16 KB flash and 6 KB SRAM as interchangeable memory resources or assume that a larger flash part can be substituted without changing startup and linker configuration. Reserve SRAM for the stack, interrupt context, USB buffers, and application data, and calculate the worst-case allocation before adding features. Also verify device revision, clock setup, USB descriptors, and pin multiplexing when moving between the /201 ordering code and the /201K ordering code.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

A RoHS-compliant listing is shown for LPC11U12FHN33/201K, but the exact LPC11U12FHN33/201 record does not provide a separate compliance declaration. The device is a general-purpose MCU rather than an AEC-Q100-qualified automotive product.

Data napatotohanan sa: 2026-11-20 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

LPC11U12FHN33/201 datasheet LPC11U12FHN33/201 pinout LPC11U12FHN33/201 datasheet pdf LPC11U12FHN33/201 specifications LPC11U12FHN33/201 equivalent LPC11U12FHN33/201 replacement LPC11U12FHN33/201 vs LPC11U12FHN33/201K LPC11U12FHN33/201 price LPC11U12FHN33/201 stock NXP LPC11U12FHN33/201 LPC11U12FHN33/201 application circuit LPC11U12FHN33/201 Arm Keil support

Mga kaugnay na Mga Komponente at mga Tuntunin

NXP Semiconductors LPC11U12FHN33/201 LPC11U12FHN33/201K LPC11U12FHN33 Arm Cortex-M0 Arm Keil CMSIS Pack LPC1100_DFP LPC1100 LPC11Uxx microcontroller embedded processor 32-bit architecture USB device controller I2C Microwire SPI SSP UART/USART 16 KB flash memory 6 KB SRAM 50 MHz clock HVQFN-32 QFN package family surface-mount package USB data logger
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ