LTC2272IUJ - 16-Bit 65Msps JESD204 Serial ADC | Analog Devices
MPN: LTC2272IUJ ✓ NakahandaLTC2272IUJ Ulas
A pipelined ADC (pipelined analog-to-digital converter) is a multi-stage converter architecture that achieves high sampling rates by cascading many low-resolution flash stages with sample-and-hold amplifiers between them; this family (LTC2273/LTC2272) targets demanding communications and instrumentation applications. Within the broader taxonomy, the LTC2272IUJ belongs to: pipelined ADC -> ADC -> data converter -> mixed-signal IC -> integrated circuit. Each conversion stage delivers sub-ADC residue bits that are recombined with a digital correction engine to produce the final 16-bit code.
Key features include a programmable-gain amplifier (PGA) front end that scales the differential analog input full-scale range, an input bandwidth of 700 MHz that supports undersampling of IF signals well above Nyquist, and the JEDEC JESD204 serial interface specification for data converters that reduces board routing and isolates noisy digital outputs from sensitive analog circuits. The serialized LVDS-style outputs also simplify PCB layout and enable smaller package footprints compared to parallel-output ADCs.
Typical applications include high-performance communications receivers, broadband instrumentation, software-defined radio (SDR) front ends, IF digitization in cellular base stations, and radar/EW signal chains. The 700 MHz input bandwidth makes the LTC2272IUJ well suited for undersampling intermediate-frequency signals in multi-carrier transceiver systems, while the JESD204 output keeps the FPGA or ASIC interface compact.
A key design consideration is the JESD204 link establishment: the host FPGA must be programmed with the correct LMF parameters, and the LTC2272IUJ must be supplied with a stable reference voltage (internal or external). For best noise performance, place the analog input capacitors, common-mode voltage bypass, and the 1.8 V analog supply decoupling within a few millimetres of the device, and isolate the analog and digital ground planes under the QFN thermal pad.
This page synthesizes distributor pricing, drop-in alternative ADCs (LTC2273, LTC2272-12), and practical JESD204 layout notes not found on the manufacturer product page alone.
Mga alternatibo na pwedeng ilagay na LTC2272IUJ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok LTC2272IUJ (parehas na form factor at footprint) — pagkakaiba sa Package, Resolution, Output Interface, Number of Channels, Operating Temperature Range.
LTC2273IUJ
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →LTC2272IUJ#PBF
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
LTC2258IUJ-14
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →LTC2267IUJ-14
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →LTC2263IUJ-14
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →LTC2272IUJ Mga Pinakamataas na Rating at Electrical Characteristics
| Pangangasiwaan | 16 bit |
| Number of Channels | 1 |
| Architecture | Pipelined |
| Sample Rate (LTC2272) | 65 Msps |
| Sample Rate (LTC2273) | 80 Msps |
| Input Bandwidth | 700 MHz |
| Input Type | Differential |
| Output Interface | JESD204 (serial, JEDEC data-converter spec) |
| PGA Front End | Programmable gain, optimizes input range |
| Analog Supply | 1.8 V |
| Digital Supply | 1.8 V |
| Packhaging | 40-QFN (IUJ), 6 x 6 mm, no-lead HVQCCN |
| Terminal Form | No Lead (HVQCCN) |
| Number of Terminals | 40 |
| Operating Temperature Grade | Industrial (I suffix) |
| Output Isolation | Serial JESD204 isolates analog from noisy digital logic |
Gabay sa Pin Configuration ng LTC2272IUJ 40-qfn (iuj), 6 x 6 mm, no-lead hvqccn
Pin configuration para sa LTC2272IUJ (40-qfn (iuj), 6 x 6 mm, no-lead hvqccn package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa LTC2272IUJ.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
LTC2272IUJ ay nararapat para sa 6 aplikasyons: Communications Receiver IF Digitization, Broadband Test & Measurement Instrumentation, Software Defined Radio (SDR) Front End, Radar and Electronic Warfare Signal Chain, Medical Ultrasound Beamforming Receiver, Industrial Vibration & Acoustic Monitoring.
Communications Receiver IF Digitization
The LTC2272IUJ digitizes intermediate-frequency (IF) signals in cellular base-station and microwave-link receivers. Its 700 MHz input bandwidth supports undersampling of IF carriers well above the 32.5 MHz Nyquist, while the 65 Msps sample rate cleanly captures multi-carrier GSM/LTE signals. Placed between the mixer IF stage and the FPGA, the LTC2272IUJ's JESD204 output keeps the digital bus off the analog PCB region, reducing spurs that would otherwise degrade receiver SNR. Pin-compatible substitution with LTC2273IUJ lets designers trade 15 Msps of headroom for system margin.
Inirekomenda
Broadband Test & Measurement Instrumentation
The LTC2272IUJ is a strong fit for high-bandwidth oscilloscope and spectrum-analyzer front ends. Its 16-bit resolution preserves dynamic range while the 700 MHz input bandwidth captures fast transient events without an external track-and-hold. The JESD204 serial interface routes converted data into an FPGA DSP block that performs FFT and decimation, simplifying multi-channel scaling. The 40-QFN 6x6 mm IUJ footprint also enables dense channel-per-board layouts in modular instruments.
Inirekomenda
Software Defined Radio (SDR) Front End
The LTC2272IUJ serves as the wideband digitizer in software-defined radio platforms. Its 700 MHz analog input bandwidth handles HF/VHF/UHF bands directly, while the JESD204 link feeds the FPGA where channel filtering, demodulation, and decoding are software-defined. The single 1.8 V supply simplifies power-rail design for battery and portable SDR platforms. Choose the LTC2273IUJ drop-in if the application requires 80 Msps coverage of wider instantaneous bandwidths.
Inirekomenda
Radar and Electronic Warfare Signal Chain
The LTC2272IUJ's wide analog input bandwidth makes it suitable for radar IF and EW receivers that need high spurious-free dynamic range. At 65 Msps the LTC2272IUJ captures pulsed-Doppler and chirp radar signals while the JESD204 output minimizes digital crosstalk in the dense RF+digital PCB. Designers can pin-swap to the LTC2273IUJ (80 Msps) for wider instantaneous bandwidth EW receivers. Industrial-grade temperature range supports defense and aerospace environments.
Inirekomenda
Medical Ultrasound Beamforming Receiver
The LTC2272IUJ fits portable and cart-based ultrasound systems that digitize at channel rates beyond 40 Msps. The 16-bit dynamic range captures subtle echo amplitude differences across tissues, while the JESD204 serial link reduces the FPGA pin count in multi-channel transducers. Industrial temperature grading supports hospital and point-of-care environments. The same QFN footprint across the LTC2272/LTC2273 family enables a single PCB layout to serve multiple product tiers.
Inirekomenda
Industrial Vibration & Acoustic Monitoring
The LTC2272IUJ's 700 MHz analog input bandwidth and 16-bit resolution are well matched to high-frequency vibration, acoustic-emission, and condition-monitoring sensors. Oversampling at 65 Msps yields high ENOB at low IF, while the JESD204 interface cleanly transports data into industrial-grade FPGAs or SoCs. The industrial temperature range (I suffix) supports factory-floor deployments. Designers needing slightly lower power may consider the LTC2272IUJ#PBF lead-free RoHS variant.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for LTC2272IUJ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | LTC2273IUJ | LTC2258IUJ-14 | LTC2267IUJ-14 |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 40-QFN (IUJ), 6x6 mm | 40-QFN (IUJ), 6x6 mm - same | 40-QFN (IUJ), 6x6 mm - same | 40-QFN (IUJ), 6x6 mm - same |
| Resolution | 16 bit | 16 bit | 14 bit | 14 bit |
| Sample Rate | 65 Msps | 80 Msps | 65 Msps | 105 Msps |
| Output Interface | JESD204 serial | JESD204 serial | Parallel LVDS | Parallel LVDS |
| Analog Supply | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
Pangunahing mga Pagkakaiba
- Pin-compatible 80 Msps upgrade path (kumpara saLTC2273IUJ)
- Highest resolution in the 40-QFN IUJ family (kumpara saLTC2258IUJ-14)
- JESD204 reduces FPGA pin count (kumpara saLTC2267IUJ-14)
Talaan ng Disenyo
The JESD204 serial differential output pairs of the LTC2272IUJ must be routed as 100-ohm differential microstrip or stripline with matched lengths (typically within 5 mils) to avoid corrupting the link eye. Keep the analog input traces and the digital JESD204 lines on opposite sides of the QFN thermal pad to prevent digital noise coupling into the analog front end. According to Analog Devices datasheet 22732fa, the exposed pad must be soldered to a continuous ground plane for thermal dissipation and electrical reference.
Provide separate 1.8 V analog (AVDD) and 1.8 V digital (DVDD) supplies to the LTC2272IUJ, each decoupled with 10 uF bulk and 0.1 uF + 1 nF ceramic capacitors within 2 mm of the supply pins. Place ferrite beads between AVDD and DVDD domains to suppress digital switching noise. Power-rail sequencing requirements are described in the Analog Devices datasheet 22732fa; violation can cause latch-up or JESD204 link initialization failure.
Avoid driving the LTC2272IUJ analog input with single-ended signals - the datasheet specifies differential drive for rated performance. A common-mode voltage near midscale (typically 0.9 V) must be established at the input pins via the internal PGA; failure to provide it causes degraded SFDR and apparent gain errors. Also, the JESD204 LMF parameters must match between the ADC and the FPGA/ASIC receiver; mismatched L/M/F values are the most common cause of link establishment failure on first bring-up.
The 40-QFN IUJ package dissipates [DATA_NEEDED: total power at 65 Msps] at full sample rate, mostly from the LVDS-style output drivers. In enclosed industrial enclosures with low airflow, attach the exposed pad to at least 1 square inch of inner-layer copper ground pour to keep junction temperature below the 125 C industrial limit. Estimated: with theta_JA of approximately 38 C/W on a 4-layer JEDEC test board, 1 W dissipation yields 38 C rise above ambient.
Impormasyon ng Pagsunod sa Kautusan
Lead-free RoHS-compliant per #PBF suffix designation on DigiKey/Mouser listings. Industrial temperature grade (-40C to +85C) per I suffix. AEC-Q100 qualification not listed; not intended for automotive safety-critical applications.
