M2GL005-VFG400 - 6060-Cell 1.2V FPGA | Microchip
MPN: M2GL005-VFG400 ✓ NakahandaM2GL005-VFG400 Ulas
An FPGA is a programmable semiconductor whose digital logic, routing, and I/O behavior are defined after fabrication through a configuration bitstream. The M2GL005-VFG400 belongs to the IGLOO 2 low-density FPGA family, which sits within the broader hierarchy of programmable logic devices, FPGAs, semiconductors, and embedded digital systems. This family is intended to provide flexible hardware implementation for functions that would otherwise require multiple discrete logic devices.
The device contains 6060 logic cells and supports a nominal 1.2 V operating supply, with a maximum supply voltage of 1.26 V identified in the product listing. Its 400-pin VFBGA package provides 169 I/O according to the manufacturer part listing, while another distributor record describes 171 inputs and 171 outputs. The surface-mount BGA-400 construction supports dense boards but requires careful escape routing, BGA inspection, and assembly-process control.
IGLOO 2 devices use a high-performance embedded memory subsystem with on-chip flash, embedded SRAM, and multiple DMA controllers. The low-density M2GL005 configuration provides a practical balance between logic capacity and board area for protocol conversion, control logic, signal conditioning, and peripheral interconnection. Its exact memory capacities, supported I/O standards, and performance grades must be selected from the manufacturer datasheet and device tables.
Typical uses include industrial bridge and conversion logic, secure connectivity, system management, embedded control, communications infrastructure, and general-purpose programmable I/O. In these systems, designers can implement parallel interfaces, protocol state machines, data acquisition logic, and control functions while retaining the ability to update the FPGA configuration during product maintenance.
For a new 400-ball layout, verify all power rails, decoupling, configuration pins, clock requirements, and bank-specific voltage constraints against the IGLOO 2 pin-description user guide. Keep sensitive interfaces away from noisy power-regulator regions, provide continuous ground-plane return paths, and confirm the exact BGA land pattern before fabrication.
This product page combines manufacturer and distributor specifications, verified same-footprint alternatives, application guidance, and practical BGA design considerations to support component selection and board planning.
Mga alternatibo na pwedeng ilagay na M2GL005-VFG400 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok M2GL005-VFG400 (parehas na form factor at footprint) — pagkakaiba sa Logic Cells, Configuration Memory, Device Type, FPGA Family, Package.
M2GL005-VF400
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →M2GL005S-VFG400
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
M2GL005-VFG400I
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
M2GL005-VFG400 Mga Pinakamataas na Rating at Electrical Characteristics
| FPGA Family | IGLOO 2 |
| Logic Cells | 6060 cells |
| Nominal Supply Voltage | 1.2 V |
| Maximum Supply Voltage | 1.26 V |
| I/O Count | 169 I/O |
| Input Count | 171 inputs |
| Output Count | 171 outputs |
| Package Pin Count | 400 pins |
| Package Type | VFBGA-400 |
| Uri ng Pagpapasok | Surface mount |
| Shipping Package | Tray |
| Device Classification | Low-density FPGA |
| Katayuan ng Lifecycle | In production |
Gabay sa Pin Configuration ng M2GL005-VFG400 tray
Pin configuration para sa M2GL005-VFG400 (tray package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa M2GL005-VFG400.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
M2GL005-VFG400 ay nararapat para sa 6 aplikasyons: Industrial Protocol Bridging, Secure Connectivity and Control, Programmable I/O Expansion, Data Acquisition and Signal Conditioning, Communications Line Card, System Management and Diagnostics.
Industrial Protocol Bridging
The M2GL005-VFG400 fits industrial bridging because its 6060 programmable logic cells can implement parallel-to-serial conversion, protocol state machines, buffering, and interface adaptation in one device. The 400-pin VFBGA package exposes 169 listed I/O for systems that need substantial parallel connectivity, while the 1.2 V core supports compact, power-conscious control boards. Engineers can place the FPGA beside sensors, converters, and communications devices, then assign logic and I/O standards according to the device bank table. Verify each bank voltage, direction, timing, and external interface requirement against the IGLOO 2 datasheet before schematic capture.
Inirekomenda
Secure Connectivity and Control
The M2GL005-VFG400 is suitable for secure-connectivity products that combine data routing, command parsing, status monitoring, and hardware control. Its 6060 logic cells allow protocol-specific logic to be updated through configuration rather than fixed into a discrete logic design, while 169 listed I/O support links between network interfaces, sensors, and actuators. The 1.2 V device operates from a compact core rail, and the IGLOO 2 family includes embedded flash, SRAM, and DMA resources for data movement. Select the precise device speed and temperature grade from the manufacturer ordering table, and confirm configuration access, clocking, and security requirements during architecture review.
Inirekomenda
Programmable I/O Expansion
The M2GL005-VFG400 can consolidate I/O expansion that would otherwise occupy several programmable logic devices. With 6060 logic cells and 169 listed I/O, it provides enough resources for data capture, level-qualified control, latch logic, and bus arbitration in a compact 400-pin VFBGA implementation. This arrangement is useful when firmware must change the external interface behavior without changing the PCB. The 1.2 V supply simplifies low-voltage core design, but every external I/O still requires the correct voltage standard, bank supply, termination, and input tolerance. Use the IGLOO 2 packaging and pin-descriptions guide to assign each ball before releasing the design.
Inirekomenda
Data Acquisition and Signal Conditioning
The M2GL005-VFG400 is appropriate for digital signal acquisition and conditioning stages that require programmable capture, filtering, triggering, timestamp alignment, or format conversion. Its 6060 logic cells can process several data paths in parallel, and the 400-pin package provides 169 listed I/O for converters, memories, status signals, and data buses. The nominal 1.2 V core is efficient for embedded instrumentation, while DMA resources in the IGLOO 2 family can move captured data without excessive processor intervention. Engineer the clock, input thresholds, sampling pipeline, and data throughput for the selected speed grade, and verify that analog front-end limits are not assigned to unsupported I/O standards.
Inirekomenda
Communications Line Card
The M2GL005-VFG400 supports communications line-card functions where packet classification, framing, timing, status aggregation, and backplane interface logic must be combined in a programmable device. Its 6060 logic cells allow hardware behavior to be revised as protocols evolve, and 169 listed I/O provide connections among transceivers, clocks, memories, and control processors. The 400-pin VFBGA package reduces board area compared with a larger peripheral-style FPGA, while the 1.2 V core supports compact line-card power design. Validate signal integrity at the selected I/O standard, define clock-domain relationships, and reserve configuration and recovery mechanisms before placing the device in a production communications platform.
Inirekomenda
System Management and Diagnostics
The M2GL005-VFG400 can implement centralized board monitoring, fault aggregation, reset sequencing, configuration control, and power-status decoding. Its 6060 logic cells provide flexibility for combining management logic with low-latency data paths, while 169 listed I/O are useful for monitoring multiple supplies, resets, clocks, and peripheral status signals. The 1.2 V core operation and programmable architecture allow diagnostic policies to be updated without a PCB respin. For dependable management behavior, define fail-safe states, isolate critical reset paths, validate clock-startup timing, and test the bitstream and configuration interface for every intended operating mode using Microchip's published device documentation.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for M2GL005-VFG400 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | M2GL005-VF400 | M2GL005S-VFG400 | M2GL005-VFG400I |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | VFBGA-400 | VFBGA-400 | VFBGA-400 | VFBGA-400 |
| Pin Count | 400 pins | 400 pins | 400 pins | 400 pins |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount |
Pangunahing mga Pagkakaiba
- Matches the documented 6060-cell IGLOO 2 configuration (kumpara saM2GL005-VF400)
- Uses the same 400-pin VFBGA footprint as the closest documented alternative (kumpara saM2GL005-VF400)
- Maintains the 1.2 V family supply across the closest listed candidate (kumpara saM2GL005-VF400)
Talaan ng Disenyo
Treat the 400-pin VFBGA footprint as a high-density assembly constraint. Follow the official package drawing for pad geometry, solder-mask definition, and assembly allowances rather than deriving dimensions from the generic BGA drawing. Maintain a continuous ground reference under the device, route escape lines through the shortest practical path, and account for via-in-pad or via-beneath-array requirements specified by the selected assembly process.
Build the 1.2 V core rail from the manufacturer recommended operating conditions, including tolerance, sequencing, and decoupling requirements. The product listing identifies 1.26 V as the maximum supply voltage, so this is not a design target. Place core and I/O bank decoupling capacitors close to their associated supply balls, keep switching-regulator loops away from sensitive inputs, and verify the complete power-up sequence before enabling external circuitry.
Assign signals by bank after reviewing voltage standards and dedicated configuration pins. Avoid routing high-speed edges through the interior of the BGA escape region, provide short return paths beneath interfaces, and separate clocks from potentially noisy data lines. Use the IGLOO 2 Packaging and Pin Descriptions User Guide to confirm ball functions and bank assignments, then document any clock-domain crossings and timing exceptions in the FPGA constraints.
Do not treat M2GL005-VF400, M2GL005S-VFG400, and M2GL005-VFG400I as automatically interchangeable merely because each uses a 400-pin package. Compare the ordering suffixes for speed grade, temperature range, technology, qualification, and packing. After any substitution, rerun pin-assignment, timing, power, and configuration checks and confirm that the programmed bitstream remains valid for the selected device.
Impormasyon ng Pagsunod sa Kautusan
The manufacturer product page confirms in-production status but does not state the requested compliance attributes. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status for the exact ordering suffix before procurement.
