M2GL050T-FCS325 - 56K LEs, 200 I/O IGLOO2 FPGA | Microchip
MPN: M2GL050T-FCS325 ✗ Tapus ng BuhayM2GL050T-FCS325 Ulas
An FPGA is a reconfigurable digital semiconductor whose logic blocks and programmable I/O can be configured after manufacture. IGLOO2 belongs to Microchip's low-density flash FPGA family, combining a programmable logic array, embedded configuration memory, and I/O resources in one device. This places the M2GL050T-FCS325 within the hierarchy FPGA → reconfigurable logic → programmable semiconductor.
The device provides 56K logic elements and 200 I/O, offering substantial connectivity for parallel data paths, control logic, and mixed interface designs. Its flash configuration technology allows the programmed design to be stored on the FPGA without requiring a separate configuration PROM. The 325-TFBGA package also supports high-density board integration while presenting demanding fine-pitch layout and manufacturing requirements.
Microchip positions the M2GL050 family for general-purpose functions including bridging, I/O expansion, data conversion, system management, and secure connectivity. The M2GL050T-FCS325 is specifically listed as not recommended for new design, with M2GL060 identified as the recommended successor. Existing designs can continue to use the original part when qualification and lifecycle requirements permit, but new projects should evaluate the recommended family.
Typical applications include industrial bridge and protocol-conversion equipment, embedded control systems, communications interfaces, and secure connectivity modules. The 56K logic-element array can implement control and datapath functions, while the 200 I/O supports external buses, converters, and supervisory signals. Product designers must still verify interface timing, voltage compatibility, power requirements, and FPGA resource utilization against their target system.
For PCB implementation, use the IGLOO2 Packaging and Pin Descriptions User Guide and the device-specific pin information to assign every ball. A 325-TFBGA layout requires careful escape routing, thermal via placement, and assembly-process control; verify the exposed-connection and ball requirements against the official package drawing before fabrication.
This page combines the 56K logic-element and 200-I/O architecture, lifecycle guidance, same-package alternatives, comparison details, and practical migration considerations to support engineering selection and legacy design maintenance.
Mga alternatibo na pwedeng ilagay na M2GL050T-FCS325 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok M2GL050T-FCS325 (parehas na form factor at footprint).
M2GL050-FCS325
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →M2GL050T-FCS325I
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
M2GL050T-1FCS325I
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
M2GL050-FCSG325
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →M2GL050TS-FCSG325
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
M2GL050T-FCS325 Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | IGLOO2 low-density flash FPGA |
| Logic Elements | 56K logic elements |
| User I/O Count | 200 I/O |
| Configuration Memory | Embedded flash configuration memory |
| Package Type | 325-TFBGA FCBGA |
| Package Ball Count | 325 balls |
| Uri ng Pagpapasok | Surface mount |
| Product Family | IGLOO2 |
| Lifecycle Recommendation | Not recommended for new design; use M2GL060 |
| Primary Logic Density | 56K logic elements |
| General-Purpose Function | Bridging, I/O expansion, conversion, system management, and secure connectivity |
Gabay sa Pin Configuration ng M2GL050T-FCS325 325 balls
Pin configuration para sa M2GL050T-FCS325 (325 balls package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa M2GL050T-FCS325.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
M2GL050T-FCS325 ay nararapat para sa 6 aplikasyons: Industrial Protocol Bridging, Communications Interface Expansion, Embedded System Management, Secure Connectivity Modules, Legacy Equipment Maintenance, FPGA-Based Sensor Aggregation.
Industrial Protocol Bridging
The M2GL050T-FCS325 fits industrial protocol-bridging equipment because its 56K logic elements can implement parallel-to-serial conversion, framing, buffering, and control logic on one FPGA. Its 200 I/O provide substantial connectivity for multiple bus domains, discrete control signals, and external data-conversion devices. Engineers can place the device between legacy peripherals and a communications processor while retaining deterministic programmable logic. The design benefit is reconfigurable hardware that can support protocol revisions without changing the PCB. The main qualification step is confirming that every I/O standard, voltage domain, and timing path in the selected device grade matches the industrial system requirements.
Inirekomenda
Communications Interface Expansion
The M2GL050T-FCS325 is appropriate for communications interface expansion where a system needs programmable channelization, byte alignment, clock crossing, and supervisory control. The 56K logic-element array supplies implementation capacity for parallel datapaths, while 200 I/O can distribute outputs among transceivers, converters, and status interfaces. Using the FPGA as an interface concentrator can reduce the number of fixed-function devices and allow protocol-specific behavior to be updated in the field through flash configuration. Designers should use the IGLOO2 pin guide to assign I/O standards, preserve clock integrity on high-speed routes, and verify that the selected M2GL050 grade meets the product's timing and temperature requirements.
Inirekomenda
Embedded System Management
The M2GL050T-FCS325 can implement central system-management logic for monitoring, sequencing, fault detection, and peripheral coordination. Its 200 I/O are useful for collecting alarms, controlling resets, driving indicators, and coordinating power-management signals, while 56K logic elements can hold multiple finite-state machines and timing controls. Flash configuration permits a field update without adding a separate configuration device, which is useful in equipment that must support controlled firmware and logic revisions. A practical design separates critical reset paths, applies appropriate pull states, and validates every fail-safe transition in simulation. Resource mapping and timing analysis should be completed with the exact device-grade timing model.
Inirekomenda
Secure Connectivity Modules
The M2GL050T-FCS325 supports secure connectivity modules by combining programmable authentication, control, and data-routing logic with embedded flash configuration. The 56K logic-element array can implement protocol framing, key-management interfaces, device selection, and status monitoring, while the 200 I/O support external interfaces and hardware-rooted control signals. Flash storage can hold a fixed design between power cycles and simplify secure-device production. Engineers must isolate security-sensitive routing, control configuration access according to Microchip's guidance, and verify the chosen suffix against environmental and lifecycle requirements. For new connectivity products, the manufacturer-recommended M2GL060 should also be assessed to avoid starting with a not-recommended-for-new-design device.
Inirekomenda
Legacy Equipment Maintenance
The M2GL050T-FCS325 remains relevant to maintenance of legacy industrial and test equipment because an identical ordering code can preserve an existing PCB layout, configuration process, and qualification record. The 325-TFBGA package retains the established 325-ball mechanical interface, and the device retains the 56K-logic-element and 200-I/O architecture associated with the M2GL050 family. This makes it preferable to a functional substitute when even a small difference in I/O standards, timing grade, or configuration behavior could invalidate a mature design. Before ordering, review the active design file against the exact part suffix and obtain lifecycle confirmation. Where redevelopment permits a board change, evaluate M2GL060 as the manufacturer-recommended successor rather than extending the legacy architecture indefinitely.
Inirekomenda
FPGA-Based Sensor Aggregation
The M2GL050T-FCS325 can aggregate and condition inputs from multiple sensors by performing digital filtering, calibration, timestamping, fault detection, and data formatting in programmable logic. Its 200 I/O provides ample external connectivity for sensor channels, trigger signals, and communications links, while 56K logic elements can support parallel datapath operations. Flash configuration allows field updates when sensor formats or filtering requirements change. The FPGA should be placed so sensor and clock routes remain short, sensitive inputs use suitable I/O standards, and unused balls receive the states required by the pin guide. Because this device is not recommended for new design, new sensor platforms should compare it with M2GL060 before layout release and retain the older platform only when lifecycle risk is formally accepted.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for M2GL050T-FCS325 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | M2GL050-FCS325 | M2GL050T-FCS325I | M2GL050T-1FCS325I | M2GL050-FCSG325 | M2GL050TS-FCSG325 |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 325-TFBGA FCBGA | 325-TFBGA FCBGA | 325-TFBGA FCBGA | 325-TFBGA FCBGA | 325-TFBGA FCBGA | 325-TFBGA FCBGA |
| Device Family | IGLOO2 low-density flash FPGA | IGLOO2 flash FPGA | IGLOO2 flash FPGA | IGLOO2 flash FPGA | IGLOO2 flash FPGA | IGLOO2 flash FPGA |
| Logic Elements | 56K logic elements | 56K logic elements | 56K logic elements | 56K logic elements | 56K logic elements | 56K logic elements |
| User I/O | 200 I/O | 200 I/O | 200 I/O | 200 I/O | 200 I/O | 200 I/O |
| Configuration Memory | Embedded flash configuration memory | Embedded flash configuration memory | Embedded flash configuration memory | Embedded flash configuration memory | Embedded flash configuration memory | Embedded flash configuration memory |
| Configuration Method | Flash configuration | Flash configuration | Flash configuration | Flash configuration | Flash configuration | Flash configuration |
Pangunahing mga Pagkakaiba
- Established 325-ball footprint with high I/O connectivity (kumpara saM2GL050-FCSG325)
- Direct legacy-design continuity (kumpara saM2GL060)
- Large I/O count for integration-heavy legacy systems (kumpara saM2GL050T-1FCS325I)
Talaan ng Disenyo
Treat the 325-TFBGA FCBGA footprint as a high-density assembly constraint. Follow Microchip's package drawing for ball locations, solder-mask and paste apertures, via dimensions, and assembly tolerances. Establish escape routing before placing external components, keep clock and sensitive routing short, and validate the complete stack-up with the fabricator's rules for fine-pitch BGA assembly.
Do not substitute a different M2GL050 ordering suffix solely because the 325-ball package appears identical. Compare the exact temperature, speed, qualification, configuration, and lifecycle ordering codes against the schematic and bill of materials. Even when the 56K logic-element and 200-I/O headline values match, a different grade can alter timing closure, environmental suitability, and product qualification.
Assign core and I/O supply domains from the exact M2GL050T-FCS325 ordering documentation before schematic release. Decouple each applicable supply rail close to its package power balls, use the manufacturer's recommended capacitance and voltage tolerances, and keep switching-current return paths away from sensitive inputs. Complete a power-budget calculation for the configured logic before choosing regulators and copper areas.
Model the FCBGA thermal path with the actual PCB stack-up and enclosure because the package's 325-ball construction can distribute heat across multiple planes. Place thermal vias under the package according to the official land pattern, avoid thermal-via conflicts with signal escape routing, and verify the assembled board under worst-case ambient temperature and the highest expected logic activity. Do not rely on a generic BGA thermal estimate.
Use the IGLOO2 Packaging and Pin Descriptions User Guide to confirm each ball name, bank voltage, I/O standard, and configuration function. Assign unused balls according to the manufacturer guidance rather than leaving them unconstrained. Check clock, configuration, JTAG, and serial programming routes for topology compatible with the chosen device grade, and use simulation or measurement to validate any high-speed interface implemented by the 200-I/O fabric.
Impormasyon ng Pagsunod sa Kautusan
Compliance declarations for the exact M2GL050T-FCS325 ordering code were not identified. The I suffix on M2GL050T-FCS325I should not be treated as proof of AEC-Q100 qualification without an exact manufacturer declaration.