M2GL090-1FGG484 - 86K LEs, 267 I/O, 1.2V IGLOO2 FPGA
MPN: M2GL090-1FGG484 ✓ NakahandaM2GL090-1FGG484 Ulas
An FPGA is a reconfigurable digital semiconductor whose internal look-up tables, flip-flops, routing resources, memory blocks, and programmable I/O can be configured after manufacture. The M2GL090 belongs to the IGLOO2 hierarchy: low-density FPGA, programmable logic device, integrated circuit, and semiconductor. This positioning makes it suitable for consolidating control logic, protocol conversion, and interface adaptation that would otherwise require multiple discrete programmable or glue-logic devices.
The principal device figures are 86,316 logic elements, 267 user I/O, and a 1.2 V supply voltage. Its broad I/O count is valuable for systems requiring numerous digital connections, while the logic capacity supports parallel control, data acquisition, packet handling, and interface bridging. Unlike a fixed-function microcontroller, the FPGA can adapt its internal architecture and pin behavior when the system design changes, reducing external logic and shortening development cycles.
Microchip positions IGLOO2 devices for general-purpose functions including Gigabit Ethernet or dual PCI Express control planes, bridging, input/output expansion and conversion, video and image processing, system management, and secure connectivity. The M2GL090 family is therefore appropriate when deterministic parallel logic, flexible I/O, and post-configuration modification are more important than the simplicity of a software-only control path.
Typical applications include industrial protocol converters, camera and imaging interfaces, secure network-edge equipment, automated test systems, embedded control panels, and communications infrastructure. The 267-I/O device can consolidate high-pin-count interfaces, although each design still requires bank-specific voltage planning, power sequencing, and careful PCB escape routing around the FBGA array.
A key design consideration is migration from smaller IGLOO2 devices. The same 484-ball package can be used across M2GL025, M2GL050, and M2GL090 families, but global-pin availability differs, so unused globals must be checked explicitly in the package pin-description guide. Power, interface standards, and FPGA timing constraints should also be evaluated before reusing a board across density grades.
This page combines manufacturer and distributor lifecycle information, package and logic specifications, drop-in family alternatives, application guidance, and migration-oriented design notes. It is intended to help engineers identify the correct IGLOO2 density, package, and speed-grade combination without overlooking differences in temperature rating, suffix coding, or device configuration.
Mga alternatibo na pwedeng ilagay na M2GL090-1FGG484 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok M2GL090-1FGG484 (parehas na form factor at footprint) — pagkakaiba sa Device Type, Logic Elements.
M2GL090-FGG484
✅ Drop-InMagkontak para sa presyo
M2GL090-1FGG484I
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
M2GL090-FG484
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →M2GL090TS-1FGG484I
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
M2GL090T-1FGG484I
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
M2GL090T-1FG484I
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
M2GL090-1FGG484 Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | IGLOO2 low-density FPGA |
| Logic Elements | 86,316 logic elements |
| User I/O Count | 267 user I/O |
| Supply Voltage na Operasyon | 1.2 V |
| Device Family | M2GL090 |
| FPGA Family | IGLOO2 |
| Package Type | 484-ball FBGA |
| Package Code | BGA |
| Total Terminals | 484 terminals |
| Package Shape | Square |
| Style ng Pagpapasok | SMD/SMT |
| Minimum Operating Temperature | 0 °C |
| Maximum Operating Temperature | +85 °C |
| Programmable Logic Type | Flash-programmable FPGA |
| Speed Grade | -1 speed grade |
| Katayuan ng Lifecycle | In Production |
Gabay sa Pin Configuration ng M2GL090-1FGG484 square
Pin configuration para sa M2GL090-1FGG484 (square package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa M2GL090-1FGG484.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
M2GL090-1FGG484 ay nararapat para sa 6 aplikasyons: Industrial Protocol Conversion, Video and Image Processing, Gigabit Ethernet Control Plane, I/O Expansion and Signal Conversion, Secure Connectivity and System Management, Automated Test and Measurement Equipment.
Industrial Protocol Conversion
The M2GL090-1FGG484 fits industrial protocol-conversion equipment that must translate several parallel or serial interfaces without using a collection of discrete buffers and glue logic. Its 86,316 logic elements provide substantial capacity for state machines, packet formatting, clock-domain crossing, and data validation, while 267 user I/O reduce pressure on external interface components. The 1.2 V core supply also supports compact, power-conscious control logic in embedded equipment. Designers should use the IGLOO2 pin-description guide to assign the required I/O banks, verify voltage compatibility on every connected interface, and complete timing analysis for each implemented conversion path before releasing production hardware.
Inirekomenda
Video and Image Processing
The M2GL090-1FGG484 is appropriate for parallel image pipelines, sensor-format adapters, and real-time video preprocessing because its 86,316 logic elements can implement parallel pixel operations, line buffers, timing generators, and format converters. The device's 267 user I/O provides substantial connectivity for camera sensors, display interfaces, and synchronization signals. Unlike a microcontroller executing each pixel operation in software, an FPGA can apply fixed logic concurrently and predictably. Engineers should define pixel-clock and horizontal/vertical synchronization constraints early, establish deterministic clock domains for each data path, and verify FPGA timing at the selected -1 speed grade before increasing image resolution or frame rate.
Inirekomenda
Gigabit Ethernet Control Plane
The M2GL090-1FGG484 can support a Gigabit Ethernet control plane, packet preprocessor, status engine, or auxiliary bridging function because 86,316 logic elements are suitable for modular packet handling and control-plane logic. Its 267 user I/O allows implementation beside a network PHY, memory interface, and system-management controller without immediately relying on external programmable logic. The 1.2 V operating supply suits compact network appliances that divide core and I/O rails through a dedicated power tree. Firmware and data-path partitioning should be decided early, and the design must confirm required interface voltages, clock quality, and timing margins before the control plane is connected to high-speed PHY signals.
Inirekomenda
I/O Expansion and Signal Conversion
The M2GL090-1FGG484 is well suited to I/O expansion in industrial and communications equipment where legacy logic, test points, status indicators, and multiple interface levels must be consolidated. The 267 user I/O offer more external connections than a small microcontroller, and the 86,316 logic elements can implement configurable bridges, counters, interrupt logic, and level-conversion control. Since the device uses a 484-ball FBGA, its principal engineering challenge is routing rather than raw functionality. Layout should use the manufacturer package information, preserve clean power and ground distribution, constrain high-speed or differential paths appropriately, and verify that every selected I/O standard matches the intended bank voltage.
Inirekomenda
Secure Connectivity and System Management
The M2GL090-1FGG484 can implement secure-connectivity front ends, authentication control, key-management interfaces, and system-management logic for communications equipment. Its large logic-element count permits parallel security checks and control functions, while 267 I/O provide connections to sensors, secure controllers, network interfaces, and supervisory circuitry. The 1.2 V core supply enables integration into a partitioned industrial power tree. Because FPGA implementation also requires a configuration, flash, and startup strategy, designers should document the configuration interface, reset behavior, and security ownership before finalizing the PCB. Any cryptographic use should also be reviewed against the product's specified compliance and environmental requirements.
Inirekomenda
Automated Test and Measurement Equipment
The M2GL090-1FGG484 fits automated test equipment that coordinates many digital channels, performs pattern generation, captures results, and adapts to changing instrument configurations. Its 86,316 logic elements can host parallel sequencing, acquisition, and control functions, and its 267 user I/O permits substantial channel density without a large programmable-logic footprint. Reconfigurability is valuable when the same tester must support multiple fixture or protocol configurations. Engineers should separate measurement timing from general-purpose control, assign clock domains carefully, and validate edge placement and I/O drive settings for every connected fixture. Production designs should also run end-to-end timing analysis rather than relying only on functional simulation.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for M2GL090-1FGG484 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | M2GL090-FGG484 | M2GL090-1FGG484I | M2GL090-FG484 | M2GL090TS-1FGG484I | M2GL090T-1FGG484I |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 484-ball FBGA | 484-ball FBGA | 484-ball FBGA | 484-ball FBGA | 484-ball FBGA | 484-ball FBGA |
| FPGA Family | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 |
| Logic Elements | 86,316 logic elements | 86,316 logic cells | 86,316 logic cells | 86,316 logic cells | 86,316 logic cells | 86,316 logic cells |
| User I/O Count | 267 user I/O | 267 I/O | 267 I/O | 267 I/O | 267 I/O | 267 I/O |
| Operating Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Speed Grade | -1 | Not stated in the MPN | -1 | Not stated in the MPN | -1 | -1 |
| Programmable Logic Type | Flash FPGA | Flash FPGA | Flash FPGA | Flash FPGA | Flash FPGA | Flash FPGA |
Pangunahing mga Pagkakaiba
- Explicit -1 speed-grade ordering option (kumpara saM2GL090-FGG484)
- Same-density pin-compatible family option with an I suffix (kumpara saM2GL090-1FGG484I)
- Broader established family interchangeability within the 484-ball package (kumpara saM2GL090-FG484)
Talaan ng Disenyo
Use the Microchip IGLOO2 Packaging and Pin Descriptions User Guide as the source for the 484-ball footprint, bank assignments, and mechanical drawing. Confirm every power, ground, configuration, clock, and general-purpose I/O ball before releasing copper. A generic 484-BGA symbol can incorrectly combine M2GL025, M2GL050, and M2GL090 global pins, which is particularly important when migrating between density grades.
Assign I/O standards by bank and confirm that each external interface voltage is compatible with the selected bank's supply. Keep clocks and high-speed interfaces away from noisy power and ground returns, use the shortest practical escape routes, and apply manufacturer-recommended ball and via arrangements. After the initial layout, run signal-integrity and timing checks on clock inputs, interfaces, and any source-synchronous paths.
Plan separate clean power paths for the 1.2 V core and each supported I/O bank. Use local bulk and bypass capacitance close to the relevant supply balls, preserve uninterrupted ground distribution beneath the device, and control power-up and power-down sequencing to avoid unintended configuration or I/O activity. Exact capacitance and sequencing requirements should be taken from the manufacturer power-supply and pin-description documentation.
Do not treat every 484-ball M2GL090 ordering code as an exact substitute. The -1, T, I, and package-code characters can alter speed, temperature, qualification, or ordering conditions even when the package remains 484-ball FBGA. Before substitution, compare the complete device identifier, operating range, timing grade, package drawing, configuration method, and published migration information; then rerun timing analysis.
Impormasyon ng Pagsunod sa Kautusan
Microchip lists the M2GL090 family as in production. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status were not established for this exact MPN and remain unknown.
