Analog Devices

MAX3232CAE+T - 1Mbps RS-232 Transceiver | Analog Devices

MPN: MAX3232CAE+T ✓ Nakahanda
3.0 V to 5.5 V Vdss 16-SSOP, 5.30 mm width Package
MOQ: 1 |

MAX3232CAE+T Ulas

The Analog Devices MAX3232CAE+T is a 2/2 RS-232 transceiver with a 3.0 V to 5.5 V supply range, operation up to 1 Mbps, and a 16-SSOP package. It integrates two drivers and two receivers for bidirectional RS-232 links and uses four external 0.1 µF charge-pump capacitors to generate the bipolar voltage required by true RS-232 receivers.

A true RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 voltage levels and converts incoming RS-232 signals back into CMOS-compatible logic. In the product hierarchy, the MAX3232 belongs to the RS-232 interface transceiver class, within interface ICs and broader data-conversion and communication-semiconductor systems. It allows equipment using TTL or CMOS serial logic to connect to legacy RS-232 ports without discrete level-shifting circuits.

The MAX3232CAE+T supports operation from 3.0 V to 5.5 V, making it suitable for systems powered from 3.3 V or 5 V rails. Its specified data rate reaches 1 Mbps, while the integrated charge-pump circuit eliminates the need for a separate switched-capacitor power converter. The two-driver, two-receiver arrangement supports two serial channels or paired transmit and receive functions on one device.

The MAX3232 family is designed for compatibility with established RS-232 interface conventions. According to the manufacturer product page, the MAX3232 is pin, package, and functionally compatible with the industry-standard MAX232, while the related MAX3232E family offers enhanced low-power and ESD-related features. The CAE part number identifies the 16-SSOP configuration, and the +T suffix identifies tape-and-reel production packaging.

Typical uses include industrial serial adapters, configuration and programming ports, point-of-sale equipment, test systems, embedded control modules, and legacy peripheral connections. The 1 Mbps capability supports higher-rate serial links, although cable length, capacitance, grounding, and signal-integrity requirements must be considered when selecting an RS-232 channel rate.

For layout, place the four 0.1 µF charge-pump capacitors close to their designated device pins and maintain short return paths for the switching currents. Keep the RS-232 connector and transceiver traces away from sensitive analog or high-speed digital signals. Verify external line protection and grounding because IC ESD ratings do not replace correctly selected connector protection.

This page consolidates the manufacturer specifications, package details, sourcing information, pin-compatible alternatives, comparison parameters, and practical RS-232 layout guidance into a focused engineering reference for evaluating the MAX3232CAE+T in new and existing serial-interface designs.

Mga alternatibo na pwedeng ilagay na MAX3232CAE+T — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok MAX3232CAE+T (parehas na form factor at footprint) — pagkakaiba sa Supply Voltage Range, ESD Protection, Package, Mounting Type, Packaging.

Analog Devices
ESD Protection: ±15 kV IEC 61000-4-2 air-gap, ±15 kV HBM
Package: 16-pin SSOP (CAE)
Ikabit sa MAX3232CAE+T →
MaxLinear
Supply Voltage Range: +3.0 V to +5.5 V
ESD Protection: 15 kV
Package: 16-SSOP (0.209, 5.30 mm Width)
MaxLinear
Supply Voltage Range: 3 V to 5.5 V
ESD Protection: 15 kV on RS-232 pins
Mounting Type: Surface mount (SMD/SMT)

MAX3232ECAE+T

✅ Drop-In
Analog Devices
📦 16-SSOP
RS-232 Transceiver · 2 / 2 · RS-232 (EIA/TIA-232, V.28/V.24) · 3.0 V to 5.5 V · Up to 1 Mbps (250 kbps minimum guaranteed) · ±15 kV IEC 61000-4-2 air-gap, ±15 kV HBM · 10 nA (typ) · 0°C to +70°C (C grade)

Magkontak para sa presyo

Tingnan ang Datasheet →

SP3232EBCA-L/TR

✅ Drop-In
MaxLinear
📦 16-SSOP
RS-232 transceiver · 2 · 2 · +3.0 V to +5.5 V · 250 kbit/s · 15 kV · 0.1 µF · RS-232

Magkontak para sa presyo

Tingnan ang Datasheet →

SP3232EBCN-L/TR

✅ Drop-In
MaxLinear
📦 16-SSOP
2/2 · Full duplex RS-232 transceiver · 3 V to 5.5 V · 250 kbps under load · 15 kV on RS-232 pins · True EIA/TIA-232-F · On-chip charge pump, single supply · 0.1 uF per pump node

✓ Sa Stock

$0.7711 / Yunit

Tingnan ang Datasheet →

MAX3232CAE+T Mga Spesipikasyon

Transceiver Configuration 2/2 full RS-232 transceiver
Number of Drivers 2 drivers
Number of Receivers 2 receivers
Supply Voltage Range 3.0 V to 5.5 V
Maximum Data Rate 1 Mbps
Interface Standard RS-232
External Charge-Pump Capacitors 4 × 0.1 µF
Packhaging 16-SSOP, 5.30 mm width
Bilang ng Pin 16 pins
Packaging Tape and reel
Uri ng Pagpapasok Surface mount

Gabay sa Pin Configuration ng MAX3232CAE+T 16-ssop, 5.30 mm width

Pin configuration para sa MAX3232CAE+T (16-ssop, 5.30 mm width package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 16-ssop, 5.30 mm width package para sa MAX3232CAE+T

Wala ng detalyadong pinout data na magagamit para sa MAX3232CAE+T.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

MAX3232CAE+T ay nararapat para sa 6 aplikasyons: Industrial Serial Configuration Port, Point-of-Sale Terminal Interface, Embedded Test and Measurement Module, Legacy Computer Serial Adapter, Programmable Controller Communication, Security and Access-Control Hardware.

🏭

Industrial Serial Configuration Port

The MAX3232CAE+T suits an industrial controller that exposes a legacy configuration or service interface through an RS-232 connector. Its two drivers and two receivers allow two RS-232 channels on one 16-SSOP device, while the 3.0 V to 5.5 V supply range supports both 3.3 V and 5 V controller platforms. Operation up to 1 Mbps provides margin for service traffic, firmware downloads, and diagnostic protocols. Four 0.1 µF charge-pump capacitors are required, so place them directly beside the associated pins and route connector transients through appropriate protection rather than relying only on internal circuitry.

🏭

Point-of-Sale Terminal Interface

The MAX3232CAE+T can bridge point-of-sale equipment that uses RS-232 for peripherals, displays, scales, or service tools. A single package contains two transmitters and two receivers, allowing bidirectional communication without duplicating the interface circuit across multiple ports. The 1 Mbps maximum data rate supports common serial transactions, and the 3.0 V to 5.5 V operating range accommodates embedded systems running from either 3.3 V or 5 V. Designers should verify the peripheral's pin-level protocol, confirm whether hardware handshaking is required, and reserve the four 0.1 µF charge-pump capacitors for close placement around the transceiver.

🔧

Embedded Test and Measurement Module

The MAX3232CAE+T provides a compact RS-232 control channel for embedded test equipment, programmable instruments, and laboratory modules. Its 16-SSOP package limits board area, while two drivers and two receivers can support separate command and response paths. The transceiver operates from 3.0 V to 5.5 V and up to 1 Mbps, making it suitable for common UART-based instrument protocols. Keep the charge-pump loop small to contain high-frequency return currents, and separate the RS-232 traces from sensitive measurement circuitry. Connector protection and a suitable ground reference remain important even when the selected interface IC includes ESD-related features.

🖥️

Legacy Computer Serial Adapter

The MAX3232CAE+T is appropriate for adapters that connect modern 3.3 V or 5 V controllers to older RS-232 equipment. The integrated charge-pump function produces the bipolar voltage needed by true RS-232 receivers while the interface operates from the same low-voltage rail as many embedded systems. Two drivers and two receivers support bidirectional serial links and additional peripheral connections in a compact 16-SSOP footprint. For reliable deployment, verify connector gender and signal assignments, provide the required four 0.1 µF capacitors, and use an external protection network appropriate for the cable length and installation environment.

⚡

Programmable Controller Communication

The MAX3232CAE+T can serve as the physical RS-232 interface for a programmable controller, embedded controller, or industrial automation module. UART logic signals connect directly to the transceiver while the external port receives standards-compliant bipolar levels. The 1 Mbps capability supports factory programming, diagnostics, and data exchange, and the 3.0 V to 5.5 V range simplifies interface selection across common control platforms. During schematic capture, follow the manufacturer pin-description table for charge-pump capacitor connections, and during layout, minimize the switched-capacitor current loop to reduce noise coupling into adjacent digital or analog circuits.

📥

Security and Access-Control Hardware

The MAX3232CAE+T can provide a wired service interface for access-control panels, security controllers, or configuration tools that retain an RS-232 port. The device's 2/2 channel arrangement allows command and status paths within one package, and its 16-SSOP format supports space-constrained control boards. The 3.0 V to 5.5 V supply range allows operation alongside common embedded security controllers, while up to 1 Mbps supports administrative traffic. Because field-connected cables can introduce large transients, use suitable connector-level surge and ESD protection, maintain a defined ground strategy, and validate the four external charge-pump capacitor placements in the final layout.

Where can I download the MAX3232CAE+T datasheet PDF?
The MAX3232CAE+T datasheet is available from the official Analog Devices MAX3232 product page at https://www.analog.com/en/products/max3232.html. The manufacturer identifies the document as the MAX3232 3.0 V to 5.5 V, low-power, up to 1 Mbps true RS-232 transceiver data sheet. Use the manufacturer document for the authoritative pin description, electrical characteristics, charge-pump capacitor requirements, and recommended operating conditions.
What are the key specifications of MAX3232CAE+T that engineers should know?
The MAX3232CAE+T is a 2/2 full-duplex RS-232 transceiver operating from 3.0 V to 5.5 V at data rates up to 1 Mbps. It provides two drivers, two receivers, and requires four external 0.1 µF capacitors for its charge-pump circuit. The device is offered in a 16-SSOP package with tape-and-reel production packaging. These are the principal electrical, functional, and mechanical characteristics to confirm before circuit design.
What is the operating voltage of MAX3232CAE+T?
The MAX3232CAE+T operates from 3.0 V to 5.5 V. According to the Analog Devices MAX3232 product page, the family is designed for low-power operation across both 3.3 V and 5 V supply environments. The selected supply voltage must remain within the specified range, and the circuit must include the four external 0.1 µF capacitors required by the charge-pump implementation.
How fast can MAX3232CAE+T transmit RS-232 data?
The MAX3232CAE+T supports RS-232 data rates up to 1 Mbps. The official Analog Devices product page describes the MAX3232 as a true RS-232 transceiver operating at up to 1 Mbps. Actual channel performance still depends on cable characteristics, capacitance, grounding, connector behavior, and the connected equipment, so a 1 Mbps specification should not be interpreted as a guarantee for every cable length or installation.
What is MAX3232CAE+T and how many drivers and receivers does it contain?
The MAX3232CAE+T is a dual-channel true RS-232 interface transceiver containing two drivers and two receivers. It converts between CMOS-compatible serial logic and RS-232 voltage levels, allowing a 3.0 V to 5.5 V digital system to communicate with legacy RS-232 equipment. Its integrated charge-pump circuit requires four external 0.1 µF capacitors and supports data rates up to 1 Mbps.
Where can I find the MAX3232CAE+T pinout?
The MAX3232CAE+T pin assignment is shown in the official Analog Devices MAX3232 data sheet linked from https://www.analog.com/en/products/max3232.html. The device uses a 16-SSOP package, and its external charge-pump capacitor connections must be assigned exactly as directed in the manufacturer pin-description table. Use that table when creating the schematic symbol and PCB footprint rather than inferring pin functions from the driver and receiver counts.
Can MAX3232CAE+T interface with a 3.3 V microcontroller?
Yes, the MAX3232CAE+T is suitable for a 3.3 V microcontroller interface because its supply range includes 3.0 V to 3.3 V operation. The transceiver provides the RS-232 voltage translation and level shifting required at the physical port. Designers must still confirm the controller's logic levels, configure the UART for the intended baud rate, and implement the required four 0.1 µF charge-pump capacitors in the layout.
How many capacitors does MAX3232CAE+T require?
The MAX3232CAE+T requires four external 0.1 µF capacitors for its charge-pump voltage generator. These capacitors are not optional; their placement and values determine whether the circuit generates the required bipolar RS-232 voltage correctly. Keep each capacitor close to its associated IC pin, use the package and value specified by the manufacturer datasheet, and provide a low-impedance ground connection to limit switching-current paths.
Is MAX3232CAE+T compatible with MAX232 interfaces?
Yes, the Analog Devices product page states that the MAX3232 is pin, package, and functionally compatible with the industry-standard MAX232. This compatibility provides a practical migration path for designs that used MAX232 in a compatible footprint. It does not mean every MAX232 option has identical electrical limits or package code, so the suffix, pin count, supply range, and datasheet must still be checked before substitution.
What can replace MAX3232CAE+T?
The SP3232EBCA-L/TR and SP3232EB are documented drop-in alternatives to the MAX3232 family, although the available cross-reference material specifically notes that SP3232EB has a 250 kbit/s data rate. The MAX3232CAE+T supports up to 1 Mbps, so a lower-rate substitute may not satisfy high-speed links. Confirm SSOP-16 pin compatibility, capacitor requirements, supply range, and channel direction before replacing the target device.
Is MAX3232ECAE+T a drop-in replacement for MAX3232CAE+T?
The MAX3232ECAE+T is a pin-compatible alternative in the 16-SSOP MAX3232 family and adds enhanced low-power and ESD-related characteristics. The comparison with MAX3232CAE+T must account for the E-family differences, including the quoted operation down to 10 nA and enhanced 15 kV ESD protection. Confirm every electrical limit in the relevant manufacturer data sheet before treating it as a drop-in replacement.
MAX3232CAE+T vs SP3232EBCA-L/TR: which is better for a 1 Mbps link?
Choose the MAX3232CAE+T when the RS-232 link must operate at up to 1 Mbps. The available MaxLinear cross-reference material identifies SP3232EBCA-L/TR as a drop-in replacement but associates SP3232EB with a 250 kbit/s data rate, making it less suitable for a high-speed channel. Both devices use the SSOP form and charge-pump approach, but speed, ESD, supply current, and capacitor requirements determine actual interchangeability.
When should I choose MAX3232CAE+T over MAX3232ECAE+T?
Choose MAX3232CAE+T when the design requires the standard MAX3232 C-family solution, up to 1 Mbps operation, and operation from 3.0 V to 5.5 V without necessarily using the enhanced E-family characteristics. Choose MAX3232ECAE+T when its improved ESD protection or lower-power behavior is specifically required. Both are associated with the 16-SSOP family, but system protection and operating-current needs should drive the choice.
Is MAX3232CAE+T suitable for industrial RS-232 equipment?
The MAX3232CAE+T is functionally suitable for industrial RS-232 interfaces that use 3.0 V to 5.5 V logic and data rates below 1 Mbps. Its two transmitters and two receivers support dual serial channels, while the integrated charge pump simplifies the interface compared with discrete RS-232 designs. Industrial qualification requirements, operating temperature, isolation, surge protection, and connector-level standards must be evaluated separately for the finished equipment.
Where can I buy MAX3232CAE+T and what is its lead time?
Use the Request a Quote form on this page to ask for MAX3232CAE+T availability, current lead time, order quantity, and production-packaging requirements. The manufacturer lists the MAX3232 family as production, and distributor listings show the 16-SSOP device, but quotation-based purchasing should confirm the exact tape-and-reel suffix and delivery schedule. This page does not quote a fixed price or stock quantity.
What is the price of MAX3232CAE+T?
Use the Request a Quote form on this page for a current MAX3232CAE+T quotation. Pricing depends on order quantity, tape-and-reel packaging, production allocation, and market conditions. The exact quantity breaks, current inventory, and lead time should be confirmed through the quote process rather than inferred from an unrelated package or family-level listing.
Is MAX3232CAE+T in stock and what is its lead time?
Current MAX3232CAE+T stock and lead time should be requested through the Request a Quote form on this page. The manufacturer identifies the MAX3232 family as production, while distributor search listings indicate market availability for related order codes. Exact availability can vary by reel quantity and suffix, so use the quote form to confirm allocation and the expected delivery schedule.
What compliance information applies to MAX3232CAE+T?
The MAX3232CAE+T should be selected against the compliance requirements of the finished product, including any RoHS, REACH, halogen-free, conflict-minerals, or automotive requirements. The official MAX3232 family documentation is the appropriate source for current declarations, but a specific status for this exact order code is not stated in the accessible manufacturer page excerpt. Request the current compliance documentation through the quotation process before release to production.

Impormasyon ng Talumpati sa Engineering for MAX3232CAE+T — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the MAX3232CAE+T for a 16-SSOP RS-232 interface that operates from 3.0 V to 5.5 V, requires two drivers and two receivers, and may need rates as high as 1 Mbps. It is the appropriate baseline choice when the design does not specifically require the enhanced E-series ESD and low-current characteristics. Choose MAX3232ECAE+T when enhanced 15 kV ESD protection or operation down to 10 nA justifies the family variant and its electrical limits have been reviewed. Consider SP3232EBCA-L/TR or SP3232EB only when their lower-rate or separately specified characteristics satisfy the protocol. For every option, verify pin assignments, capacitor values, ESD requirements, operating temperature, and connector protection before releasing a replacement to production.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto MAX3232ECAE+T SP3232EBCA-L/TR SP3232EB
Brand Analog Devices Analog Devices MaxLinear MaxLinear
Package 16-SSOP 16-SSOP - same 16-SSOP - same 16-SSOP - same

Pangunahing mga Pagkakaiba

  • Higher specified maximum data rate (kumpara saSP3232EB)
  • Direct family choice with enhanced E-series option (kumpara saMAX3232ECAE+T)
  • Single-package dual-channel interface (kumpara saSP3232EBCA-L/TR)

Talaan ng Disenyo

Place the four required 0.1 µF charge-pump capacitors as close as practical to the MAX3232CAE+T pins identified in the manufacturer pin-description table. Keep each capacitor connection short, use a common ground return with low impedance, and avoid routing the charge-pump current path through the logic ground of unrelated circuits. Tight placement limits switching-current area and reduces the coupling of charge-pump noise into nearby digital or analog signals.

Treat the RS-232 connector side as an electrically harsh environment even when the IC includes ESD protection. Select external protection components and a ground strategy appropriate for the cable, connector, and installation class, then route protected traces directly to the intended device pins. Keep the interface away from sensitive analog inputs, and verify that cable capacitance, grounding, and baud rate provide sufficient rise and fall time for reliable communication.

Do not substitute the standard MAX3232CAE+T with a lower-speed SP3232EB option without checking the communication protocol. The available cross-reference material identifies a 250 kbit/s SP3232EB rate against the target's 1 Mbps maximum. Also verify supply voltage, channel direction, shutdown behavior, charge-pump capacitor values, and exposed-pad requirements against the exact alternative data sheet before approving a board-level replacement.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The accessible manufacturer product-page excerpt does not state a compliance declaration for the exact MAX3232CAE+T order code. Obtain current RoHS, REACH, halogen-free, conflict-minerals, and automotive documentation through the Request a Quote process before production release.

Data napatotohanan sa: 2026-11-17 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

MAX3232CAE+T datasheet MAX3232CAE+T pinout MAX3232CAE+T datasheet pdf MAX3232CAE+T equivalent MAX3232CAE+T replacement MAX3232CAE+T price MAX3232CAE+T stock Analog Devices MAX3232CAE+T MAX3232CAE+T 1Mbps RS-232 MAX3232CAE+T 16-SSOP MAX3232CAE+T vs MAX3232ECAE+T MAX3232CAE+T vs SP3232EB MAX3232CAE+T application circuit MAX3232CAE+T 3.3V interface

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices MAX3232CAE+T MAX3232ECAE+T SP3232EBCA-L/TR SP3232EB MAX3232 MAX232 RS-232 RS-232 transceiver interface IC CMOS-compatible logic charge-pump circuit bipolar RS-232 voltage 16-SSOP SSOP family surface mount 1 Mbps 3.0 V to 5.5 V two drivers two receivers UART ESD protection industrial control test and measurement
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ