Texas Instruments

MAX3232ECDE4 - 250kbps RS-232 Transceiver | Texas Instruments

MPN: MAX3232ECDE4 ✓ Nakahanda
3 V to 5.5 V Vdss 16-SOIC Package
MOQ: 1 |

MAX3232ECDE4 Ulas

The Texas Instruments MAX3232ECDE4 is a dual RS-232 line driver and receiver integrated circuit with two transmit channels and two receive channels. It supports data rates up to 250 kbps from a 3 V to 5.5 V supply and provides ±15 kV IEC ESD protection on the RS-232 interfaces. The device is packaged in a 16-pin SOIC and is specified for a 0 °C to 70 °C ambient temperature range.

An RS-232 transceiver is an interface IC that converts between single-ended, bipolar RS-232 signals and complementary digital logic levels. It belongs to the transceiver class of interface ICs, combining a line driver, a line receiver, charge-pump voltage generation, and logic-level translation in one package. This integration reduces the component count required for serial ports in industrial controllers, test equipment, and embedded systems.

Key features include full-duplex operation with two drivers and two receivers, a 250 kbps maximum signaling rate, and a wide 3 V to 5.5 V operating supply range. The ±15 kV IEC ESD rating is the primary distinction between the E-series MAX3232 devices and standard MAX3232C variants. The SOIC-16 package also supports automated assembly and compact board layouts that are difficult to achieve with larger through-hole transceivers.

The MAX3232ECDE4 uses on-chip charge pumps to generate the positive and negative voltage levels required by the RS-232 drivers. Its receivers include Schmitt-trigger inputs, which improve noise immunity when the logic threshold lies near a switching transition. Both interfaces are designed for noisy industrial environments where cable transients and ESD events are common. Detailed electrical limits and timing margins must be confirmed against the manufacturer datasheet before release.

Typical applications include RS-232 links between a host computer and an embedded controller, industrial instrumentation, programmable-logic equipment, service interfaces, and legacy peripheral connectivity. The device is especially useful where the logic system operates from 3.3 V or 5 V but the external cable interface must comply with RS-232 voltage levels. The 16-pin SOIC footprint is appropriate for designs that do not require electrical isolation.

For layout, place the charge-pump capacitors close to their associated device pins and route the RS-232 driver and receiver connections directly to the connector or protection network. Keep logic-side traces away from exposed cable-side nets. Confirm the external charge-pump capacitor values and ESD protection network against the manufacturer application guidance before fabrication.

This page organizes the verified device characteristics, practical RS-232 design considerations, pin-level package information, and drop-in replacement analysis. It helps engineers evaluate the MAX3232ECDE4 against lower-ESD MAX3232C variants and other 16-pin RS-232 transceivers without relying on fragmented distributor listings.

Mga alternatibo na pwedeng ilagay na MAX3232ECDE4 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

MAX3232CDE4

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
Texas Instruments
📦 16-SOIC
RS-232 line driver/receiver transceiver · 2/2 · Full duplex · 3 V to 5.5 V · 250 kbps · ±15 kV HBM · 0 °C to 70 °C · 16-SOIC, 0.154 in (3.90 mm) width

Magkontak para sa presyo

Tingnan ang Datasheet →

MAX3232CAE4

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 16-SOIC
Same 16-SOIC MAX3232 pin architecture with lower ESD protection; temperature-grade selection must match the target 0 °C to 70 °C requirement

📋 Alternatibo na Reference (hindi sa katalogo)

MAX3232CSE4

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 16-SOIC
Same MAX3232 16-SOIC architecture and 250 kbps-class interface function, but standard rather than ±15 kV IEC ESD protection

📋 Alternatibo na Reference (hindi sa katalogo)

MAX3232CWE4

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 16-SOIC
Same dual-driver dual-receiver SOIC footprint, with standard ESD protection instead of the enhanced ±15 kV IEC rating

📋 Alternatibo na Reference (hindi sa katalogo)

MAX3232EEAE4

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 16-SOIC
Same enhanced MAX3232E transceiver family and 16-SOIC package function, with a different ordering-suffix temperature and package designation

📋 Alternatibo na Reference (hindi sa katalogo)

MAX3232ECDE4 Mga Spesipikasyon

Device Type RS-232 line driver/receiver transceiver
Number of Drivers 2
Number of Receivers 2
Duplex Mode Full duplex
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbps
ESD Protection ±15 kV IEC
Interface Standard RS-232
Hanay ng Temperature na Operasyon 0 °C to 70 °C
Packhaging 16-SOIC
Package Width 3.90 mm
Uri ng Pagpapasok Surface mount

Gabay sa Pin Configuration ng MAX3232ECDE4 3.90 mm

Pin configuration para sa MAX3232ECDE4 (3.90 mm package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 3.90 mm package para sa MAX3232ECDE4

Wala ng detalyadong pinout data na magagamit para sa MAX3232ECDE4.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

MAX3232ECDE4 ay nararapat para sa 6 aplikasyons: Industrial Controller RS-232 Port, Embedded System Service Interface, Test and Measurement Equipment, Programmable Logic Controller Interface, Audio and Studio Peripheral Link, Network Equipment Maintenance Port.

🏭

Industrial Controller RS-232 Port

The MAX3232ECDE4 is appropriate for an industrial controller that must communicate with a legacy RS-232 instrument through a single 16-SOIC device. Its two drivers and two receivers support full-duplex operation, while the 250 kbps data rate covers most configuration and supervisory protocols. The ±15 kV IEC ESD protection is particularly valuable when the cable terminates near an exposed connector or enters through a panel-mounted interface. Place the RS-232 nets directly toward the connector and keep the logic-side traces isolated from those nets.

🔧

Embedded System Service Interface

The MAX3232ECDE4 can provide a service and configuration port for an embedded controller operating from a 3.3 V or 5 V logic rail. Integrating the charge-pump circuitry within the transceiver means the board does not need a separate negative or positive RS-232 rail, and the 16-SOIC package simplifies assembly. The two-channel arrangement allows one connection to remain active while another is used for diagnostics. External protection devices should be selected according to the connector exposure and the required ±15 kV IEC ESD system-level rating.

🖥️

Test and Measurement Equipment

The MAX3232ECDE4 fits bench instruments, programmable power supplies, and automated test systems that require a short RS-232 control link. A 250 kbps maximum rate is more than adequate for command and response traffic, while full-duplex operation simplifies protocol handling. The enhanced ESD rating is useful when users connect and disconnect cables during routine testing. Keep the RS-232 trace geometry controlled, provide the manufacturer-recommended charge-pump capacitors, and verify the receive thresholds against the system noise environment.

⚙️

Programmable Logic Controller Interface

The MAX3232ECDE4 can interface a programmable logic controller or embedded controller to older RS-232 equipment that remains in the installed base. Its 3 V to 5.5 V supply range allows direct operation alongside modern digital logic rails, while the integrated charge pumps generate compliant RS-232 levels internally. The dual-driver, dual-receiver organization supports separate command and diagnostic channels. Confirm grounding strategy and cable routing because galvanic isolation is not provided by the transceiver itself.

🎧

Audio and Studio Peripheral Link

The MAX3232ECDE4 is suitable for control-only RS-232 connections between studio peripherals, mixers, and host controllers where the audio itself uses a separate digital or analog path. The 250 kbps rate is well suited to control packets, and the 16-SOIC footprint leaves board space for the audio circuitry and connector. The higher ESD rating improves robustness when a user-accessible control cable is connected to equipment. Do not use this device to carry balanced audio; it is intended only for RS-232 data signaling.

🌐

Network Equipment Maintenance Port

The MAX3232ECDE4 is useful for a maintenance or out-of-band management port on routers, switches, and industrial gateways that retain a legacy RS-232 console. The device combines two channels in a compact 16-SOIC package and supports logic rails used by modern embedded systems. The ±15 kV IEC ESD protection helps when the console cable is connected in uncontrolled service environments. If the management port crosses an isolation boundary or a large ground-potential difference, add an appropriate isolation interface rather than relying on the transceiver alone.

What is the maximum data rate of the MAX3232ECDE4?
The MAX3232ECDE4 supports a maximum RS-232 data rate of 250 kbps. According to the Texas Instruments MAX3232ECDE4 datasheet, the device combines two transmitters and two receivers for full-duplex serial communication. This rate is suitable for configuration ports, instrument control links, and other short-distance serial connections. The actual usable rate also depends on cable length, baud-rate tolerance, and receiver noise margins.
What is the MAX3232ECDE4 supply voltage range?
The MAX3232ECDE4 operates from 3 V to 5.5 V, allowing it to interface with both 3.3 V and 5 V digital logic systems. The manufacturer describes the part as a 3 V to 5.5 V multichannel RS-232 line driver and receiver. Its integrated charge-pump circuitry generates the positive and negative voltages required by the RS-232 drivers, so the logic-side supply does not need to support bipolar levels.
What does the E in MAX3232ECDE4 mean?
The E suffix identifies the enhanced ESD-protection version of the MAX3232 family. The MAX3232ECDE4 is specified with ±15 kV IEC ESD protection, while standard MAX3232C-family devices are commonly offered with lower ESD ratings. The package ordering code E4 also identifies the 16-SOIC package variant. Confirm the exact ordering symbols, temperature grade, and ESD ratings in the manufacturer ordering information.
Where can I download the MAX3232ECDE4 datasheet PDF?
The MAX3232ECDE4 datasheet PDF is available through the Texas Instruments product documentation and the linked distributor record. The manufacturer document is titled “3-V to 5.5-V Multichannel RS-232 Line Driver/Receiver with ±15-kV IEC ESD Protection.” Use the pin-description table, recommended operating conditions, and external-capacitor guidance in that document when laying out the board or publishing a released schematic.
Where is the pinout for the MAX3232ECDE4?
The MAX3232ECDE4 uses a 16-pin SOIC package, with pin 1 identified by the standard package dot marker. The manufacturer datasheet contains the authoritative pin-description table and the charge-pump capacitor connections. Assign PCB tracks from that table rather than relying on package position alone, because the driver, receiver, supply, ground, and charge-pump functions each have fixed locations within the 16-SOIC footprint.
Is the MAX3232ECDE4 a full-duplex RS-232 transceiver?
Yes, the MAX3232ECDE4 is a 2-transmitter, 2-receiver full-duplex RS-232 transceiver. One channel can transmit while the other receives, allowing simultaneous bidirectional communication on the same device. The distributor product description identifies it as a 2/2 full-duplex transceiver, while the manufacturer datasheet defines the individual driver, receiver, and charge-pump pin functions.
What is the best drop-in replacement for the MAX3232ECDE4?
A drop-in replacement must use the same 16-SOIC footprint, preserve the pin functions, and provide comparable RS-232 voltage and speed ratings. MAX3232C-family devices from the same manufacturer are the closest candidates because they share the transceiver architecture, but they generally provide lower ESD protection than the enhanced MAX3232E version. Confirm supply voltage, temperature grade, external capacitor values, and ESD requirements before accepting any substitute.
Can MAX3232CDE4 replace the MAX3232ECDE4?
The MAX3232CDE4 can be considered as a close same-footprint replacement when lower ESD protection is acceptable. The key functional difference is its lower ESD rating compared with the ±15 kV IEC rating of the MAX3232ECDE4. Because the surrounding protection network and operating temperature must also be checked, validate the substitution against the manufacturer datasheet rather than treating the two devices as fully interchangeable in every application.
What is the best STMicroelectronics equivalent for the MAX3232ECDE4?
An STMicroelectronics equivalent must be verified for exact pin compatibility, not merely for having two drivers and two receivers. ST3232-family devices are functionally comparable RS-232 transceivers, but package width, logic thresholds, charge-pump pin assignments, temperature grade, and ESD ratings can differ. Use the manufacturer pin tables to confirm a true drop-in footprint and the cross-reference search for an authoritative substitution recommendation before redesigning the PCB.
When should I choose the MAX3232ECDE4 instead of a MAX3232C variant?
Choose the MAX3232ECDE4 when exposed cables, connector contacts, or industrial transients require the higher ±15 kV IEC ESD protection. Choose a MAX3232C variant when the design has a controlled, short cable interface and lower ESD protection is acceptable. Both belong to the same RS-232 transceiver family and use comparable 16-pin SOIC packaging, so the decision should be based on environmental exposure rather than basic RS-232 functionality.
Is the MAX3232ECDE4 suitable for industrial equipment?
The MAX3232ECDE4 is suitable for industrial equipment designs that operate within its specified 0 °C to 70 °C range and use its ±15 kV IEC ESD protection. Industrial systems requiring operation below 0 °C or above 70 °C should select a temperature-rated alternative and confirm the complete operating specification. The interface IC does not provide galvanic isolation, so separate isolation hardware is required for high-voltage or safety-critical bus barriers.
What can replace the MAX3232ECDE4?
The closest replacements are 16-SOIC RS-232 transceivers with two drivers, two receivers, a 3 V to 5.5 V supply capability, and matching charge-pump pin assignments. Same-manufacturer MAX3232C-family parts offer the most direct route, but their lower ESD protection is the main distinction. For a cross-manufacturer substitution, verify the footprint and pin functions directly because a similar transceiver description alone does not guarantee drop-in compatibility.
What are the key specifications of the MAX3232ECDE4 that engineers should know?
The principal MAX3232ECDE4 specifications are a 3 V to 5.5 V supply range, two drivers, two receivers, full-duplex operation, a 250 kbps maximum data rate, ±15 kV IEC ESD protection, and a 16-SOIC package. Texas Instruments specifies the commercial temperature range from 0 °C to 70 °C. The device also integrates charge-pump circuitry, eliminating the need for a separate external bipolar supply while still requiring specified charge-pump capacitors.
Where can I buy the MAX3232ECDE4 online?
The MAX3232ECDE4 can be requested through the Request a Quote form on this page for current commercial availability and delivery information. The manufacturer part number includes the enhanced ESD version, the narrow 16-SOIC package, and the commercial temperature grade. Confirm the complete ordering code when submitting a request so that the quoted configuration matches the intended board-level footprint and temperature requirements.
What is the price of the MAX3232ECDE4?
Current commercial pricing for the MAX3232ECDE4 is obtained through the Request a Quote form on this page rather than from a static price table. A complete request should identify the exact 16-SOIC ordering code, required quantity, shipment destination, and target schedule. This approach also lets the supplier confirm that the quoted configuration includes the enhanced ±15 kV IEC ESD version rather than a lower-rated MAX3232C variant.
What is the lead time for the MAX3232ECDE4?
The current lead time for the MAX3232ECDE4 should be requested through the Request a Quote form on this page. Include the required quantity, target date, and shipment destination in the request. Because the enhanced ESD version and the standard MAX3232C devices have different order codes and potentially different sourcing conditions, confirm availability for the exact MPN rather than for the broader MAX3232 family.

Impormasyon ng Talumpati sa Engineering for MAX3232ECDE4 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the MAX3232ECDE4 when the RS-232 port is exposed to user-accessible cables, industrial transients, or frequent service connections and the ±15 kV IEC ESD rating is important. Its 3 V to 5.5 V supply range, 250 kbps rate, and 16-SOIC package also make it a practical choice for controllers operating from modern logic rails. A MAX3232C-family part is reasonable when the cable is short and controlled, the board can accept a lower ESD rating, and its lower protection level is sufficient. When evaluating any same-family alternative, verify the temperature grade, package width, charge-pump capacitor values, and exact pin functions. For a cross-manufacturer replacement, require a documented 16-SOIC footprint and identical pin assignments rather than relying on the shared “dual RS-232 transceiver” description.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto MAX3232CDE4 MAX3232CAE4 MAX3232CSE4 MAX3232CWE4 MAX3232EEAE4
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Transmitter Channels 2 2 2 2 2 2
Receiver Channels 2 2 2 2 2 2

Pangunahing mga Pagkakaiba

  • Enhanced ESD protection (kumpara saMAX3232CDE4)
  • Integrated dual-channel RS-232 interface (kumpara saMAX3232CAE4)
  • 250 kbps serial performance (kumpara saMAX3232CSE4)
  • Wide single-supply operation (kumpara saMAX3232CWE4)

Talaan ng Disenyo

Place the externally required charge-pump capacitors adjacent to the pins identified in the manufacturer pin-description table, and keep their return paths short. Route RS-232 driver and receiver nets directly toward the connector. The transceiver contains charge-pump circuitry, but its switching-current return path should not share noisy logic or power-conversion return routes. This arrangement limits radiated emissions and helps the receiver maintain margin in electrically noisy equipment.

Do not substitute a standard MAX3232C device for the MAX3232ECDE4 without reviewing the ESD requirement. The target has ±15 kV IEC ESD protection, while the standard-family alternatives have lower protection ratings. Also confirm the operating temperature grade, package width, and charge-pump pin assignments. RS-232 transceivers do not provide galvanic isolation, so a separate isolation design is required when the port crosses a hazardous ground-potential boundary.

Treat the cable-side RS-232 nets as potential EMI sources even though the receivers use noise-tolerant thresholds. Keep external protection components close to the connector, preserve the recommended driver and receiver return connection, and avoid long stubs. When the cable is user-accessible, verify the complete connector-to-IC protection path against the required ±15 kV IEC ESD system-level condition rather than relying only on the IC rating.

Decouple the 3 V to 5.5 V supply locally and confirm that its voltage remains within the operating limits at the device pins. Charge-pump operation can create supply ripple even though the circuit generates no external switching supply in the usual sense. Provide the external capacitors specified by the manufacturer and observe their placement guidance; changing capacitor values can affect startup behavior, supply disturbance, and the achievable data rate.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The manufacturer description identifies ±15 kV IEC ESD protection, but separate RoHS, REACH, lead-free, and halogen-free declarations were not available for extraction. IEC appears only as the ESD-protection test reference in the product description.

Data napatotohanan sa: 2026-11-09 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

MAX3232ECDE4 datasheet MAX3232ECDE4 pinout MAX3232ECDE4 datasheet pdf MAX3232ECDE4 equivalent MAX3232ECDE4 replacement MAX3232ECDE4 cross reference MAX3232ECDE4 vs MAX3232CDE4 MAX3232ECDE4 250kbps RS-232 MAX3232ECDE4 16-SOIC MAX3232ECDE4 15kV ESD Texas Instruments MAX3232ECDE4 MAX3232ECDE4 price MAX3232ECDE4 stock MAX3232ECDE4 application circuit MAX3232ECDE4 footprint

Mga kaugnay na Mga Komponente at mga Tuntunin

Texas Instruments MAX3232ECDE4 MAX3232CDE4 MAX3232CAE4 MAX3232CSE4 MAX3232CWE4 MAX3232EEAE4 RS-232 RS-232 transceiver line driver line receiver full-duplex transceiver interface IC charge-pump voltage converter Schmitt-trigger receiver 250 kbps 3 V to 5.5 V ±15 kV IEC ESD protection SOIC-16 16-SOIC surface-mount semiconductor industrial control test and measurement service interface
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ