MAX3232EETE+ - 1Mbps Dual RS-232 Transceiver | Analog Devices
MPN: MAX3232EETE+ ✓ NakahandaMAX3232EETE+ Ulas
An RS-232 transceiver is an interface integrated circuit that converts logic-level transmit and receive signals into RS-232 line levels and back again. In the broader hierarchy, a transceiver belongs to the interface IC family, connects communication controllers to physical serial links, and is commonly used wherever reliable point-to-point serial communication must cross a cable or connector boundary.
The MAX3232E family combines two RS-232 drivers, two RS-232 receivers, and a dual charge-pump circuit in one package. Key features include a 3.0 V to 5.5 V operating range, operation at up to 1 Mbps, low shutdown current down to 10 nA, and ±15 kV ESD protection on the serial-port connection pins. Its true RS-232 implementation supports systems that require bipolar line-level signaling rather than a non-RS-232 logic interface.
Internally, the charge-pump circuit generates the positive and negative voltages required by the drivers. The receiver section converts the bipolar RS-232 signal into a CMOS-compatible logic level, while the driver section converts CMOS logic into RS-232 levels. This integration eliminates separate level-shifting circuitry and reduces the number of external support components required around a communications controller.
Typical uses include industrial serial-control links, data-acquisition equipment, point-of-sale terminals, test and measurement instruments, and embedded systems that retain an RS-232 port. The ±15 kV protection rating is particularly relevant when the connector is exposed to electrostatic discharge or electrically noisy environments.
PCB design should place the charge-pump capacitors and the external receiver and driver bypass capacitance close to their associated pins. Keep the exposed-pad ground connection and high-current return paths compact to minimize switching-current loops. Confirm the exact connector-side protection and grounding strategy against the MAX3232E data sheet before field deployment.
This product overview combines the manufacturer’s electrical specifications, package information, cross-reference findings, application guidance, and practical layout considerations. It also distinguishes genuine same-footprint ordering options from RS-232 devices that require a different PCB footprint, helping engineers select a replacement without overlooking mechanical constraints.
Mga alternatibo na pwedeng ilagay na MAX3232EETE+ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok MAX3232EETE+ (parehas na form factor at footprint) — pagkakaiba sa Package, ESD Protection, Maximum Data Rate, Number of Drivers, Number of Receivers.
MAX3232EATE+
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
MAX3232EESE+
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →MAX3232EETE+T
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →MAX3232EETE+ Mga Spesipikasyon
| Product Type | Dual RS-232 transceiver |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Maximum Data Rate | 1 Mbps |
| ESD Protection | ±15 kV |
| Kuru-kuryente ng Pagbubuwag | Down to 10 nA |
| Transceiver Configuration | 2 drivers and 2 receivers |
| Interface Standard | TIA/EIA-232-F |
| Packhaging | 16-pin TQFN |
| Package Dimensions | 5 mm × 5 mm |
| Uri ng Pagpapasok | Surface mount |
| Charge-Pump Architecture | Dual charge pump |
| Logic Compatibility | CMOS-compatible interface |
Pin Configuration ng MAX3232EETE+
| Pin 1 | R1OUT — Receiver 1 output |
| Pin 2 | R1IN — Receiver 1 input |
| Pin 3 | R2IN — Receiver 2 input |
| Pin 4 | R2OUT — Receiver 2 output |
| Pin 5 | T1IN — Driver 1 input |
| Pin 6 | T1OUT — Driver 1 output |
| Pin 7 | T2OUT — Driver 2 output |
| Pin 8 | T2IN — Driver 2 input |
| Pin 9 | GND — Ground |
| Pin 10 | VCC — Positive supply voltage |
| Pin 11 | V- — Negative charge-pump output |
| Pin 12 | V+ — Positive charge-pump output |
| Pin 13 | NC — Not connected |
| Pin 14 | NC — Not connected |
| Pin 15 | NC — Not connected |
| Pin 16 | NC — Not connected |
Tipikal na mga Gamit
MAX3232EETE+ ay nararapat para sa 6 aplikasyons: Industrial Serial-Control Interfaces, Data-Acquisition Equipment, Point-of-Sale Terminals, Test and Measurement Instruments, Embedded Serial Communication Ports, Portable and Power-Sensitive Serial Equipment.
Industrial Serial-Control Interfaces
The MAX3232EETE+ fits industrial serial-control equipment that requires a true RS-232 interface for configuration commands, diagnostics, or service access. Its two drivers and two receivers support bidirectional communication from a compact controller, while the 3.0 V to 5.5 V supply range simplifies integration with modern embedded logic. Operation up to 1 Mbps permits faster service protocols than the 250 kbps rate identified for the related TI MAX3232E variant. The ±15 kV ESD protection rating adds useful ruggedness at a connector exposed to maintenance activity. Place the charge-pump capacitors close to the device and route the interface ground carefully to the connector return.
Inirekomenda
Data-Acquisition Equipment
The MAX3232EETE+ is appropriate for data-acquisition units that send commands and receive measurements through a legacy RS-232 port. A single 3.0 V to 5.5 V supply can serve both the transceiver and compatible controller logic, reducing the number of rails in the instrument. The two receiver channels can monitor separate RS-232 inputs, and the two driver channels support bidirectional control or reporting. With throughput up to 1 Mbps, the interface is suitable for burst data transfer where the host and peripheral can agree on a suitable protocol. For bench or field equipment, preserve the differential return path to the connector and follow the manufacturer’s recommended external capacitance values.
Inirekomenda
Point-of-Sale Terminals
The MAX3232EETE+ can provide a compact, protected serial connection between a point-of-sale controller and a peripheral using an RS-232 port. Its two drivers and two receivers cover typical bidirectional command and status traffic, while the 16-pin TQFN package saves board area compared with larger leaded RS-232 devices. The 3.0 V to 5.5 V operating range is useful for systems that already operate near 3.3 V or 5 V. ESD protection is relevant because retail peripherals are frequently connected and disconnected by operators. Validate the peripheral’s signal polarity, handshake requirements, and connector pinout before using either driver or receiver channel.
Inirekomenda
Test and Measurement Instruments
The MAX3232EETE+ is useful in test and measurement instruments that retain RS-232 for legacy controllers, calibrators, or service tooling. Its true RS-232 drivers and receivers allow a modern control platform to communicate with older equipment without a separate external level converter. The 3.0 V to 5.5 V supply range simplifies integration, and the 1 Mbps capability supports higher-volume command and result transfers when supported by the connected equipment. The ±15 kV ESD rating helps protect the instrument during routine bench cabling. For accuracy-critical measurements, keep the interface circuit physically separated from high-impedance analog sections and use a controlled ground reference at the connector.
Inirekomenda
Embedded Serial Communication Ports
The MAX3232EETE+ provides a straightforward way for an embedded controller to retain a true RS-232 port when its native I/O operates at CMOS logic levels. Two transmit channels and two receive channels can support console, status, and service connections within one compact package. The 3.0 V minimum supply voltage suits 3.3 V systems, while operation up to 5.5 V supports 5 V logic environments. Up to 1 Mbps operation gives the firmware flexibility to select an appropriate baud rate. The ±15 kV ESD rating is valuable in systems exposed to field wiring, although the design must still include appropriate cable grounding and protection practices.
Inirekomenda
Portable and Power-Sensitive Serial Equipment
The MAX3232EETE+ can serve portable or battery-powered equipment that requires a wired RS-232 connection. Its 3.0 V to 5.5 V supply range allows operation from an efficient 3.3 V rail, and the manufacturer lists shutdown current down to 10 nA, making controlled low-power states practical. The 16-pin TQFN package also supports compact layouts compared with larger leaded RS-232 packages. Designers should enable shutdown only when the connected equipment can tolerate an interrupted serial link, and should account for the active operating current rather than the shutdown figure when sizing the power source.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for MAX3232EETE+ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | MAX3232EATE+ | MAX3232EESE+ | MAX3232EETE+T |
|---|---|---|---|---|
| Package | 16-pin TQFN (5 mm × 5 mm) | 16-pin TQFN (5 mm × 5 mm) | 16-pin TQFN (5 mm × 5 mm) | 16-pin TQFN (5 mm × 5 mm) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Transceiver Configuration | 2 drivers and 2 receivers | 2 drivers and 2 receivers | 2 drivers and 2 receivers | 2 drivers and 2 receivers |
| Supply Voltage Range | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V |
| Maximum Data Rate | 1 Mbps | 1 Mbps | 1 Mbps | 1 Mbps |
| ESD Protection | ±15 kV | ±15 kV | ±15 kV | ±15 kV |
| Shutdown Current | Down to 10 nA | Down to 10 nA | Down to 10 nA | Down to 10 nA |
| Charge-Pump Architecture | Dual charge pump | Dual charge pump | Dual charge pump | Dual charge pump |
| RS-232 Standard | TIA/EIA-232-F | TIA/EIA-232-F | TIA/EIA-232-F | TIA/EIA-232-F |
| Ordering Configuration | MAX3232EETE+ | EATE ordering configuration | EESE ordering configuration | EETE+T ordering configuration |
Pangunahing mga Pagkakaiba
- Full 1 Mbps operation in a compact 16-pin TQFN footprint (kumpara saMAX3232EETE+T)
- ESD protection integrated on serial-port pins (kumpara saMAX3232EATE+)
- Single-supply operation simplifies modern controller interfaces (kumpara saMAX3232EESE+)
Talaan ng Disenyo
Place the charge-pump capacitors and the supply bypass capacitor directly beside their associated MAX3232EETE+ pins. Keep these traces short because the charge-pump nodes can carry fast-switching current. Connect the exposed pad to the ground plane with multiple short vias, and maintain a continuous return path between the device ground and the RS-232 connector ground to reduce common-mode voltage and radiated noise.
Separate the RS-232 driver outputs from sensitive receiver inputs and analog circuitry wherever the board layout permits. Do not route long unprotected traces away from the connector. Use the data-sheet reference layout for driver and receiver bypass components, and verify that exposed-pad solderable area and thermal-via pattern match the manufacturer’s 16-pin TQFN land pattern before releasing artwork.
Do not treat logic-level UART signals as RS-232 levels. The MAX3232EETE+ provides bipolar RS-232 transmit and receive functions, so connector-side voltages and signal polarity must follow the selected channel assignments. Also verify the correct ordering suffix, temperature grade, and carrier configuration; electrically similar parts in SOIC, TSSOP, or other packages are not drop-in replacements for the TQFN footprint.
Keep the RS-232 cable interface away from high-speed clocks, switching supplies, and high-current return paths. The charge-pump circuit can generate harmonics, so observe the recommended capacitor values and avoid adding long copper loops around the V+ and V− nodes. A solid ground plane, controlled connector return, and short supply path generally provide more reliable EMC behavior than external filtering alone.
Impormasyon ng Pagsunod sa Kautusan
The MAX3232EETE+ is described as an ESD-protected, lead-free-style production part, but explicit RoHS, REACH, halogen-free, and conflict-minerals declarations are not present in the cited source material. Automotive qualification is not indicated for this ordering option.