NXP Semiconductors

MC33742EP - 5V SPI Automotive CAN SBC | NXP | Interface ICs

MPN: MC33742EP ✗ Tapus ng Buhay
5.5 V to 18 V Vdss 48-VFQFN exposed-pad, 7 mm x 7 mm Package
MOQ: 1 |

MC33742EP Ulas

The NXP Semiconductors MC33742EP is an automotive System Basis Chip with an enhanced high-speed CAN transceiver, SPI-controlled configuration, and a fixed 5.0 V low-dropout internal regulator. It operates from a 5.5 V to 18 V supply in a 48-VFQFN exposed-pad package measuring 7 mm by 7 mm, making it intended for compact automotive electronic control unit and body-electronics designs.

A System Basis Chip, or SBC, is an integrated semiconductor that combines several functions commonly distributed across an electronic control unit. Within the power-management IC hierarchy, the MC33742EP provides protected 5.0 V power, reset control, and monitoring functions alongside a communications interface. Its CAN 2.0-compliant transceiver and SPI control interface allow a microcontroller to configure and monitor an automotive communication subsystem while reducing the number of discrete support components.

Key features include a fully protected fixed 5.0 V low-dropout regulator, current limiting, overtemperature prewarning, and a reset function. The broad 5.5 V to 18 V input range accommodates automotive battery-derived power systems, while the integrated high-speed CAN transceiver supports network communication in electronic control units. The exposed-pad package provides a thermal path on the PCB but still requires careful copper and thermal-layout design to dissipate internal losses efficiently.

The MC33742EP combines a power-management IC, CAN transceiver, and serial interface in one package. Its SPI connection provides a straightforward digital control path, and the fixed 5.0 V regulator simplifies the design of low-voltage MCU, logic, and sensor rails. The integrated protection and diagnostic functions help simplify board partitioning, although exact load capability, reset timing, logic thresholds, and transceiver loop-delay limits must be confirmed from the manufacturer datasheet before final schematic release.

Typical applications include automotive body controllers, electronic control units, climate-control modules, seat and door controllers, lighting controllers, instrument clusters, and distributed sensor nodes. Its integration is particularly useful when a design needs CAN communication, regulated 5.0 V power, and supervised reset behavior while minimizing component count and board area.

For layout, place the input and output capacitors close to their associated pins, provide a low-impedance ground reference, and allocate a continuous exposed-pad copper area with thermal vias. Check the PCB stack-up, copper weight, and nearby heat sources when validating junction temperature. Use the pin-description table in the NXP MC33742 datasheet when assigning tracks, test points, and exposed-pad connections.

This product page summarizes the MC33742EP interface, automotive CAN SBC architecture, verified package information, sourcing workflow, cross-reference options, and practical integration guidance. It also distinguishes documented electrical characteristics from parameters that still require confirmation during component-specific design review.

Mga alternatibo na pwedeng ilagay na MC33742EP — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok MC33742EP (parehas na form factor at footprint) — pagkakaiba sa Package, Supply Voltage Range.

NXP Semiconductors
Package: 48-QFN-EP (7x7 mm) with exposed pad
Supply Voltage Range: 5.5 V to 27 V (5V/9V/12V/15V/18V/24V automotive battery compatibility)
Ikabit sa MC33742EP →

MC33742EPR2

✅ Drop-In
📦 48-VFQFN exposed-pad, 7 mm x 7 mm
Same MC33742EP function and 48-VFQFN exposed-pad package; ordering suffix differs by 0%, with lifecycle and qualification details requiring confirmation.

📋 Alternatibo na Reference (hindi sa katalogo)

MC33742PEP/R2

✅ Drop-In
📦 48-VFQFN exposed-pad, 7 mm x 7 mm
Same MC33742EP function and 48-VFQFN exposed-pad package; ordering suffix differs by 0%, with temperature and qualification details requiring confirmation.

📋 Alternatibo na Reference (hindi sa katalogo)

MC33742PEPR2

✅ Drop-In
NXP Semiconductors
📦 48-VFQFN exposed-pad, 7 mm x 7 mm
System Basis Chip (SBC) with HS-CAN · NXP Semiconductors (formerly Freescale / Motorola) · 48-QFN-EP (7x7 mm) with exposed pad · Surface Mount · 1 Mb/s (High-Speed CAN) · 1 / 1 · 2 x 5.0 V / 200 mA low-dropout regulators · 4

Magkontak para sa presyo

Tingnan ang Datasheet →

MC33742EP Mga Spesipikasyon

Device Type System Basis Chip (SBC)
Automotive Application Automotive electronic control units
Control Interface SPI
CAN Standard CAN 2.0 compliant
Internal Regulator Output Fixed 5.0 V
Internal Regulator Topology Low-dropout regulator
Supply Voltage Range 5.5 V to 18 V
Internal Regulator Protection Current limit and overtemperature prewarning
Reset Function Yes
CAN Transceiver Enhanced high-speed CAN transceiver
Packhaging 48-VFQFN exposed-pad, 7 mm x 7 mm
Uri ng Pagpapasok Surface mount
Packaging Tray

Gabay sa Pin Configuration ng MC33742EP 48-vfqfn exposed-pad, 7 mm x 7 mm

Pin configuration para sa MC33742EP (48-vfqfn exposed-pad, 7 mm x 7 mm package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 48-vfqfn exposed-pad, 7 mm x 7 mm package para sa MC33742EP

Wala ng detalyadong pinout data na magagamit para sa MC33742EP.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

MC33742EP ay nararapat para sa 6 aplikasyons: Automotive Body Control Module, High-Speed CAN ECU Gateway, Climate-Control Electronics, Seat and Door Control Unit, Automotive Lighting Controller, Distributed Sensor Node.

🚗

Automotive Body Control Module

The MC33742EP fits an automotive body control module that requires a 5.0 V regulated rail and a high-speed CAN network connection. Its 5.5 V to 18 V operating range accommodates the documented automotive supply environment, while the SPI-controlled fixed 5.0 V regulator and reset function provide local supervision. The integrated CAN 2.0-compliant transceiver can reduce board partitioning compared with a separate transceiver and regulator arrangement. Place the device according to the NXP exposed-pad land pattern, preserve short supply paths, and size the 5.0 V rail for the ECU load before thermal qualification.

🌐

High-Speed CAN ECU Gateway

The MC33742EP is appropriate for an ECU gateway that must communicate over a high-speed CAN bus and provide regulated local power to logic or sensors. Its enhanced high-speed CAN 2.0-compliant transceiver combines network connectivity with a protected fixed 5.0 V low-dropout regulator in one 48-VFQFN exposed-pad device. SPI control allows the host processor to access configuration and status functions. The principal design trade-off is internal heat dissipation from the regulator at sustained loads, so engineers should calculate worst-case dissipation and provide the package with a continuous ground-copper thermal path.

🏭

Climate-Control Electronics

A climate-control ECU can use the MC33742EP to combine CAN communication, a fixed 5.0 V supply, and supervisory reset behavior. The 5.5 V to 18 V input range suits the device family’s automotive focus, while the integrated regulator reduces the number of separate support components required near the controller. The SPI interface provides a digital path for configuration and status monitoring. Designers should keep the device away from localized heat sources, follow the manufacturer exposed-pad layout, and verify regulator loading for actuators, sensor interfaces, and logic connected to the 5.0 V rail.

🔧

Seat and Door Control Unit

The MC33742EP suits distributed seat, door, or latch electronics that need network communication and regulated logic power in a compact assembly. Its integrated high-speed CAN transceiver removes the need for a separate CAN physical-layer device, while the fixed 5.0 V regulator, current limiting, overtemperature prewarning, and reset support a compact ECU implementation. The 48-VFQFN exposed-pad package helps preserve PCB area, but exposed-pad vias and copper must follow the NXP land pattern. Confirm cable transient protection and the exact 5.0 V load current during design verification.

💡

Automotive Lighting Controller

The MC33742EP can serve as the local System Basis Chip in an automotive lighting controller when the module requires a CAN link and supervised low-voltage logic rail. The fixed 5.0 V regulator provides a common supply for digital control logic, while SPI control and reset support deterministic system behavior. Because lighting controllers may contain nearby power stages and heat sources, position the SBC with a dedicated thermal path and keep switching-current return paths away from sensitive supply and CAN routing. Verify regulator headroom, load transients, and the exposed-pad temperature rise under worst-case operating conditions.

🧩

Distributed Sensor Node

The MC33742EP is well matched to an automotive distributed sensor node that needs regulated 5.0 V power, CAN communication, reset supervision, and a compact footprint. Its SPI interface lets a host controller configure the System Basis Chip, while the CAN 2.0-compliant transceiver connects the node to the vehicle network. Integrating the regulator and transceiver can lower support-component count, but the node designer must still account for input transients, CAN bus protection, regulator thermal load, and exposed-pad grounding. Use the NXP datasheet for exact pin assignments and application-rated protection components.

Buod ng mga Inirekomendang Produkto

MC33742PEP Same-family System Basis Chip option Ginagamit sa: Automotive Body Control Module, High-Speed CAN ECU Gateway, Seat and Door Control Unit, Automotive Lighting Controller MC33742EPR2 Same-family ordering alternative Ginagamit sa: Automotive Body Control Module, Climate-Control Electronics, Seat and Door Control Unit, Distributed Sensor Node MC33742PEP/R2 Same-family System Basis Chip option Ginagamit sa: High-Speed CAN ECU Gateway, Climate-Control Electronics, Automotive Lighting Controller, Distributed Sensor Node
What is the MC33742EP?
The MC33742EP is a NXP Semiconductors automotive System Basis Chip that combines a fixed 5.0 V low-dropout regulator, an enhanced high-speed CAN 2.0-compliant transceiver, SPI control, current limiting, overtemperature prewarning, and reset. According to the NXP MC33742 datasheet, it is intended for automotive electronic control units and similar distributed ECU platforms.
What is the operating voltage of MC33742EP?
The MC33742EP operates from 5.5 V to 18 V. The NXP MC33742 datasheet describes this as the supply range for an automotive System Basis Chip with an integrated high-speed CAN transceiver. The exact absolute maximum and transient limits should still be checked in the datasheet when defining the power-input protection network and automotive load-dump design.
Where can I download the MC33742EP datasheet PDF?
The official MC33742EP datasheet PDF is available from NXP at https://www.nxp.com/docs/en/data-sheet/MC33742.pdf. It covers the System Basis Chip architecture, 5.5 V to 18 V supply range, fixed 5.0 V regulator, SPI interface, CAN transceiver, protection functions, and the 48-VFQFN exposed-pad package. Use the NXP document for final pin, electrical, and timing assignments.
Where is the MC33742EP pinout?
The MC33742EP pinout is published in the pin-description table of the NXP MC33742 datasheet at https://www.nxp.com/docs/en/data-sheet/MC33742.pdf. The device is offered in a 48-VFQFN exposed-pad package with an exposed thermal pad. Use the pin-description and package drawings in that document when assigning PCB tracks, test points, and exposed-pad vias.
What are the key specifications of MC33742EP that engineers should know?
The principal MC33742EP specifications are a 5.5 V to 18 V supply range, fixed 5.0 V low-dropout internal regulator, SPI control interface, CAN 2.0-compliant enhanced high-speed transceiver, and 48-VFQFN exposed-pad package. According to the NXP MC33742 datasheet, the regulator also includes current limiting, overtemperature prewarning, and reset, consolidating several ECU functions into one device.
Is MC33742EP suitable for automotive electronic control units?
Yes, the MC33742EP is specifically intended for automotive electronic control units. The NXP datasheet identifies automotive applications, SPI configuration, CAN 2.0 communication, and a 5.5 V to 18 V operating range. Its integrated 5.0 V regulator, reset, current limiting, and overtemperature prewarning make it suitable for compact ECU nodes, subject to application-specific qualification and protection review.
What can replace the MC33742EP?
The closest documented cross-references are MC33742EPR2, MC33742PEP/R2, and MC33742PEP from NXP. These are orderable or packaging variants of the same MC33742 family and remain the first candidates for a board-level replacement review. Confirm the exact suffix, package, pin compatibility, temperature range, qualification status, and lifecycle condition before approving any substitution.
Is MC33742EP the same as MC33742PEP?
The MC33742EP and MC33742PEP are listed as alternatives within the same MC33742 family, but the suffix must not be assumed to have no purchasing or qualification effect. Both are associated with the NXP System Basis Chip family, while their ordering, package, and lifecycle details should be checked individually. Verify the exact manufacturer data before marking either part as a drop-in replacement.
MC33742EP vs MC33742EPR2 - which is better for an automotive ECU?
Choose MC33742EPR2 when it is an exact approved ordering variant for the MC33742EP design and its current qualification and supply status satisfy the program requirements. The documented cross-reference identifies MC33742EPR2 as an alternative, but it does not by itself establish every ordering, temperature, or lifecycle detail. The NXP product documentation and the manufacturer cross-reference should control the final decision.
What is the best NXP equivalent for MC33742EP?
MC33742EPR2 is the most directly documented NXP family alternative for MC33742EP because the manufacturer cross-reference lists it alongside the original part. MC33742PEP/R2 and MC33742PEP are additional same-family references. A different-manufacturer equivalent cannot be confirmed as a true pin-to-pin drop-in from the available cross-reference information, so PCB and qualification changes should not be assumed.
When should I choose MC33742EP over another MC33742 family variant?
Choose MC33742EP when the exact ordering code matches the approved BOM, package documentation, lifecycle plan, and supply requirements for the ECU. If that ordering code is unavailable, evaluate MC33742EPR2, MC33742PEP/R2, or MC33742PEP as documented same-family options. Do not select a replacement based only on the MC33742 family name; verify suffix-specific temperature, qualification, packing, and lifecycle details.
Where can I buy MC33742EP online?
Use the Request a Quote form on this XAIPART product page to request MC33742EP availability, lot information, and a quotation. The public product listings confirm that MC33742EP is associated with the NXP 48-QFN exposed-pad interface IC, but they do not provide a qualifying quantity-break price table. The quote team can also confirm the current lifecycle and approved sourcing status.
What is the price of MC33742EP?
MC33742EP pricing depends on quantity, condition, packing, and current market availability, so use the Request a Quote form on this page for a current transaction price. The available product listings identify the exact part but do not show an explicit quantity-and-price table suitable for direct quotation. Submit the required quantity, target package, and delivery location for a project-specific response.
What is the lead time for MC33742EP?
Request the current MC33742EP lead time through the Request a Quote form on this page and include the required quantity and target delivery date. Because this part is identified as an obsolete or end-of-life family member in a cross-reference listing, supply may depend on remaining factory or authorized-channel inventory. Confirm lot traceability, condition, and lifecycle terms before placing a production order.
Is MC33742EP in stock?
Stock for MC33742EP should be confirmed through the Request a Quote form on this page. The available listings show the exact NXP device and its 48-QFN exposed-pad package, but they do not establish a current, guaranteed stock quantity. Supply status can change quickly for an end-of-life component, so request the quantity on hand and applicable lot and traceability details.
Does MC33742EP need special PCB layout for its exposed pad?
Yes, the MC33742EP exposed thermal pad should be connected to the package ground and to the PCB ground plane using the land pattern shown in the NXP datasheet. Use short thermal-via connections and provide uninterrupted copper beneath the package. Maintain short supply and ground paths while checking the regulator dissipation and junction-temperature budget for the worst-case automotive load condition.

Impormasyon ng Talumpati sa Engineering for MC33742EP — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose MC33742EP when the approved ECU design specifically names this ordering code and its package, qualification, and lifecycle conditions remain acceptable. The MC33742EPR2, MC33742PEP/R2, and MC33742PEP references are same-family alternatives that retain the 48-VFQFN exposed-pad format, making them the closest options for a sourcing review. Select among them only after checking suffix-specific temperature grade, qualification, packing, and current lifecycle status. No cross-manufacturer pin-to-pin equivalent is established here, so changing manufacturers may require a schematic, PCB, firmware, EMC, and qualification review rather than a simple drop-in substitution. For new production, verify whether the original device remains actively supported or whether an engineering change to a current platform is more appropriate.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto MC33742EPR2 MC33742PEP/R2 MC33742PEP
Package 48-VFQFN exposed-pad, 7 mm x 7 mm 48-VFQFN exposed-pad, 7 mm x 7 mm 48-VFQFN exposed-pad, 7 mm x 7 mm 48-VFQFN exposed-pad, 7 mm x 7 mm
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Device Type Automotive System Basis Chip System Basis Chip System Basis Chip System Basis Chip

Pangunahing mga Pagkakaiba

  • Integrated automotive System Basis Chip functionality (kumpara saMC33742EPR2)
  • Same-package ordering flexibility within the MC33742 family (kumpara saMC33742PEP/R2)
  • Fixed regulated 5.0 V rail with integrated protection (kumpara saMC33742PEP)

Talaan ng Disenyo

Treat the exposed pad as both an electrical ground connection and the primary thermal path. Follow the NXP land pattern, maintain uninterrupted ground copper beneath the 48-VFQFN package, and add thermal vias where the PCB stack-up permits. Before production release, calculate regulator dissipation from the actual input and 5.0 V load conditions and verify the resulting junction-temperature margin using the board-level thermal model.

Place input decoupling and the 5.0 V output capacitor directly beside their associated package pins. Keep the high-current return path compact and route it away from CAN and SPI signal traces to reduce shared-impedance disturbances. Use the package drawing in the NXP MC33742 datasheet for exposed-pad dimensions, pad clearance, solder-mask details, and via placement rather than estimating them from the nominal 7 mm by 7 mm body size.

Do not approve a replacement solely because it carries the MC33742 family name. Verify the exact suffix, 48-VFQFN exposed-pad footprint, temperature grade, qualification status, packing method, lifecycle condition, and pin assignments for MC33742EPR2, MC33742PEP/R2, or MC33742PEP. Also confirm the selected part’s regulated 5.0 V load capability and the project’s transient, reset, and thermal requirements before release.

Keep the CAN bus path and its protection components away from the SPI and regulator return network. Terminate or bias the CAN bus exactly as specified in the NXP application guidance, and use a solid ground reference beneath the high-speed transceiver area. Validate radiated and conducted emissions with the production PCB stack-up because exposed-pad grounding and high-current loop geometry can affect emissions beyond device-level specifications.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The MC33742 family is associated with automotive applications. Component-specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status must be confirmed from the exact ordering code and NXP product documentation.

Data napatotohanan sa: 2026-11-11 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

MC33742EP datasheet MC33742EP pinout MC33742EP datasheet pdf MC33742EP specifications MC33742EP 48-QFN MC33742EP automotive CAN SBC MC33742EP equivalent MC33742EP replacement MC33742EP cross reference MC33742EP vs MC33742EPR2 MC33742EP footprint NXP MC33742EP MC33742EP price MC33742EP stock MC33742EP application circuit

Mga kaugnay na Mga Komponente at mga Tuntunin

NXP Semiconductors MC33742EP MC33742EPR2 MC33742PEP/R2 MC33742PEP System Basis Chip SBC automotive electronic control unit ECU CAN transceiver CAN 2.0 SPI fixed 5.0 V regulator low-dropout regulator LDO voltage regulator power management IC semiconductor current limiting overtemperature prewarning reset 48-VFQFN exposed-pad QFN family surface mount SMD
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ