NXP Semiconductors

MC9S08PL32CLD - 8-Bit 20MHz 32KB MCU | NXP Semiconductors

MPN: MC9S08PL32CLD ✓ Nakahanda
5V Vdss 44-LQFP (10mm x 10mm) Package 20MHz Speed 32KB Memory
MOQ: 1 |

MC9S08PL32CLD Ulas

The NXP Semiconductors MC9S08PL32CLD is an 8-bit S08P-family microcontroller operating at up to 20MHz, with 32KB of flash memory and a 44-LQFP package measuring 10mm by 10mm. It targets cost-sensitive 5V embedded systems that require integrated analog conversion, EEPROM, timers, and mixed-signal control in a single device.

An S08P microcontroller is an 8-bit RISC/CISC-style embedded controller within the broader microcontroller and embedded-processor hierarchy. These devices combine a central processing unit, nonvolatile program memory, data memory, timers, serial interfaces, and analog peripherals on one package. The MC9S08PL32CLD extends the S08 platform with a reusable core, established intellectual property, and compatible development tools that simplify migration from earlier 8-bit S08 products.

The principal device characteristics include a 20MHz maximum operating frequency, 32KB of flash program memory, EEPROM data storage, a 10-bit analog-to-digital converter, an analog comparator, and flexible timer resources. The manufacturer also identifies excellent EFT and ESD performance as a family-level feature. These capabilities make the MCU suitable for compact industrial controllers, sensing modules, appliance controls, and other systems that need local analog measurement and embedded logic without a separate conversion device.

The 44-LQFP package provides a conventional surface-mount footprint with leads on all four sides. This package supports automated assembly and provides more exposed connection options than smaller leadless packages. The operating voltage is identified as 5V in the product description, while detailed electrical limits, current consumption, memory maps, peripheral assignments, and absolute maximum ratings should be confirmed in the manufacturer data sheet before schematic release or PCB signoff.

Typical applications include motor and valve supervisory controls, LED and illumination systems, sensor acquisition nodes, building equipment interfaces, and compact appliance controllers. The 10-bit ADC handles analog measurements, the comparator supports threshold and simple waveform decisions, and EEPROM preserves calibration or configuration data when volatile RAM would be insufficient.

The principal design consideration is firmware compatibility. Confirm the exact peripheral pin multiplexing, interrupt-vector arrangement, reset behavior, and programming configuration for the selected suffix before reusing an existing PCB. Review the pin-description table in the manufacturer data sheet and preserve the recommended decoupling and programming interface layout to avoid configuration or signal-integrity issues.

This page combines device specifications, sourcing guidance, package information, comparison context, and application-oriented design notes. It is intended to help engineers evaluate the MC9S08PL32CLD for 5V embedded designs and identify verified migration options without treating merely similar devices as automatic drop-in replacements.

Mga alternatibo na pwedeng ilagay na MC9S08PL32CLD — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok MC9S08PL32CLD (parehas na form factor at footprint) — pagkakaiba sa Package, Analog Comparator, Flash Organization, Lifecycle Status, Maximum CPU Frequency.

NXP Semiconductors
Package: 44-LQFP, 10 x 10 mm
Analog Comparator: Integrated analog comparator
Lifecycle Status: NRND
Ikabit sa MC9S08PL32CLD →
NXP Semiconductors
Package: 48-LQFP (7x7 mm)
Flash Organization: 32K x 8
Ikabit sa MC9S08PL32CLD →
NXP Semiconductors
Package: 44-LQFP (10x10 mm)
Ikabit sa MC9S08PL32CLD →

MC9S08PT32VLD

✅ Drop-In
📦 44-LQFP (10mm x 10mm)
Both devices provide an 8-bit CPU, 32KB flash, and a 44-LQFP format; the comparison record identifies 3.3V/5V operation for MC9S08PT32VLD, while exact pin and peripheral differences require verification.

📋 Alternatibo na Reference (hindi sa katalogo)

MC9S08PA32VLD

✅ Drop-In
NXP Semiconductors
📦 44-LQFP (10mm x 10mm)
8-bit S08 microcontroller · 20 MHz · 32 KB · 32K x 8 bits · 5 V · Integrated analog comparator

Magkontak para sa presyo

Tingnan ang Datasheet →

MC9S08PT32AVLD

✅ Drop-In
NXP Semiconductors
📦 44-LQFP (10mm x 10mm)
S08 (HCS08L) · 8-bit · CISC, von Neumann · 20 MHz · 32 KB (32K x 8) FLASH · 2 KB · 256 x 8 bytes · 37

Magkontak para sa presyo

Tingnan ang Datasheet →

MC9S08PL32CLD Mga Pinakamataas na Rating at Electrical Characteristics

Product Type 8-bit S08P microcontroller
Maximum CPU Frequency 20MHz
Flash Program Memory 32KB
Flash Organization 32K x 8 bits
CPU Architecture 8-bit S08 central processor
Operating Voltage 5V
ADC Resolution 10 bits
Analog Comparator Integrated
EEPROM Integrated
Timers Flexible timer resources
Packhaging 44-LQFP (10mm x 10mm)
Uri ng Pagpapasok Surface mount
Lead Count 44 leads
EFT Performance Manufacturer-highlighted family performance
ESD Performance Manufacturer-highlighted family performance
Katayuan ng Lifecycle Active

Gabay sa Pin Configuration ng MC9S08PL32CLD 44-lqfp (10mm x 10mm)

Pin configuration para sa MC9S08PL32CLD (44-lqfp (10mm x 10mm) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng 44-lqfp (10mm x 10mm) package para sa MC9S08PL32CLD

Wala ng detalyadong pinout data na magagamit para sa MC9S08PL32CLD.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

MC9S08PL32CLD ay nararapat para sa 6 aplikasyons: Industrial Sensor Acquisition, Appliance Control Module, LED Lighting Controller, Motor and Valve Supervisor, Building Equipment Interface, Cost-Effective HMI Controller.

🏭

Industrial Sensor Acquisition

The MC9S08PL32CLD fits compact industrial sensor modules that require local analog measurement and control. Its 10-bit ADC can digitize sensor signals, while the analog comparator supports fast threshold decisions around setpoints. The 20MHz 8-bit CPU provides enough processing bandwidth for filtering, scaling, fault detection, and communication formatting without requiring a separate converter. EEPROM is useful for retaining calibration coefficients, sensor offsets, or configuration data across power cycles. A 44-LQFP package also exposes more I/O than a compact leadless package, making it practical for external interfaces, status indicators, and programming connections. Design the analog input network and reference arrangement according to the manufacturer data sheet, and verify acquisition timing and input limits in the intended operating environment.

🔧

Appliance Control Module

The MC9S08PL32CLD is appropriate for appliance control boards that combine user inputs, motor sequencing, temperature measurement, and reliable configuration storage. The 32KB flash program memory can hold the main control application, the 10-bit ADC can monitor a thermistor or analog sensor, and EEPROM can preserve operating profiles or calibration settings. Its 20MHz 8-bit architecture supports responsive state-machine control while keeping the firmware and power system straightforward. The 44-LQFP package provides adequate pins for switches, relays, indicators, communications, and programming. For heating or motor-control systems, isolate noisy loads from analog circuitry, use appropriate protection networks, and validate timing against the appliance safety requirements. A hardware reset and brownout strategy should also be reviewed with the relevant S08P reference documentation.

💡

LED Lighting Controller

The MC9S08PL32CLD can serve as the controller in a programmable LED or illumination system where dimming decisions, current monitoring, and local configuration are required. Flexible timer resources support periodic tasks and timing sequences, while the comparator can detect threshold conditions associated with current or temperature sensing. The 32KB flash capacity accommodates control tables, communication routines, and update logic, and EEPROM can store user-selected lighting scenes. At a 20MHz operating rate, the 8-bit S08 CPU can manage multiple outputs and status feedback efficiently. The 44-LQFP footprint makes external drivers and control interfaces straightforward to route. Keep high-current LED paths physically separated from the MCU and analog section, include suitable drive transistors, and follow the data sheet's recommendations for decoupling and grounding.

🤖

Motor and Valve Supervisor

The MC9S08PL32CLD suits supervisory control of motors, solenoids, valves, and small actuators where a dedicated safety or timing controller is unnecessary. Timer inputs can monitor command and feedback timing, while the 10-bit ADC and analog comparator can evaluate current, position, or pressure-related analog signals. Its 32KB flash memory supports a structured state machine, fault logging, and communication protocols, while EEPROM can preserve calibration or operating limits. The 44-LQFP package provides sufficient pins for command outputs, sensor inputs, and debug programming. Because inductive loads can introduce large switching transients, use appropriate driver and suppression components, isolate analog returns where practical, and confirm the MCU's exact pin multiplexing. Firmware should also include startup, timeout, and safe-state behavior for every actuator.

🧩

Building Equipment Interface

The MC9S08PL32CLD can provide a compact interface for building equipment such as room controllers, pump controllers, environmental monitors, or actuator hubs. The 5V operating environment aligns with many legacy control boards, while the 32KB flash capacity is sufficient for protocol handling, state management, and diagnostic functions. The integrated 10-bit ADC supports environmental measurements, and the comparator can provide a simple independent threshold function. EEPROM is valuable for retaining setpoints, calibration data, or equipment identity. Its 44-LQFP package offers enough pins for field buses, status outputs, and service programming. Designers should provide robust surge and ESD protection at external connectors, observe recommended decoupling practice, and use the exact pin-description table because alternate peripheral functions can affect board-level assignments.

📺

Cost-Effective HMI Controller

The MC9S08PL32CLD works as a secondary human-machine-interface controller when the primary task involves button scanning, display-state management, buzzer timing, and simple serial communication. Its 20MHz 8-bit CPU can refresh a simple display and process inputs while flexible timers support debouncing, periodic updates, and communication timing. The 32KB flash area can hold menus and localized status information, and EEPROM can retain settings when power is removed. The 44-LQFP package provides sufficient I/O for buttons, display control, and programming while remaining compatible with standard surface-mount assembly. Use the comparator for simple switch or voltage-threshold detection when appropriate, and use the ADC for analog control inputs. Separate display and connector transient paths from sensitive signal traces, and verify all alternate-function selections against the exact data sheet.

Buod ng mga Inirekomendang Produkto

What is the MC9S08PL32CLD?
The MC9S08PL32CLD is an active NXP Semiconductors 8-bit S08P microcontroller rated for operation at up to 20MHz. It provides 32KB of flash program memory, EEPROM, a 10-bit ADC, an analog comparator, and flexible timers in a 44-LQFP package measuring 10mm by 10mm. According to the NXP product page, the device is intended for cost-effective 5V embedded systems and reuses the S08 core, intellectual property, and tools for migration from earlier S08 products.
What are the key specifications of MC9S08PL32CLD?
The principal MC9S08PL32CLD specifications are an 8-bit S08 CPU, a maximum clock frequency of 20MHz, and 32KB of flash memory organized as 32K by 8 bits. The integrated peripherals include EEPROM, a 10-bit ADC, an analog comparator, and flexible timers. The device is packaged in a 44-LQFP with a 10mm by 10mm body. NXP identifies the MCU as active and highlights strong EFT and ESD performance for the S08P family.
Where can I download the MC9S08PL32CLD datasheet PDF?
Download the MC9S08PL32CLD data sheet from the official NXP product page linked on this page or from the NXP document-download section. The manufacturer product page is the preferred source because it connects the exact orderable MC9S08PL32CLD identifier to its current data sheet and supporting documentation. Use the package drawing, pin-description table, memory map, electrical characteristics, and recommended application circuit from that document when completing the design.
Where can I find the MC9S08PL32CLD pinout?
The MC9S08PL32CLD pinout is defined in the pin-description table and package drawing contained in the manufacturer data sheet. The device uses a 44-LQFP package with leads on all four sides, but the pin functions and alternate multiplexing must be assigned from the exact MC9S08PL32CLD documentation rather than inferred from the package outline. Confirm power, ground, reset, programming, clock, and peripheral assignments before routing the PCB.
Is MC9S08PL32CLD suitable for 5V embedded control systems?
The MC9S08PL32CLD is suitable for 5V embedded control systems because it combines a 20MHz 8-bit S08 processor, 32KB of flash, EEPROM, a 10-bit ADC, an analog comparator, and timers in one 5V device. The integrated conversion and comparison functions reduce the need for external analog circuitry. Final suitability also depends on the exact supply limits, ADC operating conditions, peripheral timing, and environmental requirements in the manufacturer data sheet.
What can replace the MC9S08PL32CLD?
No confirmed automatic drop-in replacement should be selected solely from similarity or a shared package. MC9S08PA32VLD, MC9S08PT32AVLD, and MC9S08PT32VLD appear in comparison records for the MC9S08PL32CLD, but those records do not by themselves prove identical pin multiplexing, memory behavior, and peripheral resources. Treat them as migration candidates and verify the exact pin assignments, voltage range, clock configuration, interrupt mapping, and programming workflow before approving a replacement.
Is MC9S08PL32CLD the same as MC9S08PT32VLD?
The MC9S08PL32CLD and MC9S08PT32VLD are related 8-bit 32KB microcontroller options, but they are not established as exact drop-in equivalents. A comparison listing describes MC9S08PT32VLD as an 8-bit HCS08L device with 32KB of flash, a 44-pin LQFP package, and 3.3V/5V operation. Confirm MCU family, peripheral set, pin multiplexing, clock tree, and firmware differences in the NXP documentation before treating the two as interchangeable.
MC9S08PL32CLD vs MC9S08PA32VLD: which is better for a new 5V design?
Choose between them by comparing the exact S08P family features and peripheral map rather than by the shared 8-bit, 32KB, and LQFP format. The MC9S08PL32CLD is explicitly positioned as a 5V cost-effective MCU with EEPROM, a 10-bit ADC, analog comparator, and flexible timers. MC9S08PA32VLD appears in a direct comparison, but its detailed ratings are not established here. Review both data sheets and choose only after confirming the required timers, serial interfaces, analog channels, and pin assignments.
When should I choose MC9S08PL32CLD over another 8-bit MCU?
Choose the MC9S08PL32CLD when a design needs a 20MHz 8-bit MCU with 32KB of flash, 5V operation, integrated EEPROM, a 10-bit ADC, an analog comparator, and flexible timers in a 44-LQFP package. It is particularly useful when retaining the S08 toolchain and peripheral ecosystem reduces migration effort. For designs requiring substantially more flash, faster interfaces, more I/O, or a different CPU architecture, a larger 8-bit family member or a 32-bit MCU may be a better engineering choice.
Is MC9S08PL32CLD suitable for ADC-based sensing applications?
The MC9S08PL32CLD is suitable for many ADC-based sensing applications because it includes a 10-bit ADC, analog comparator, EEPROM, timers, and a 20MHz 8-bit CPU. The ADC can acquire analog sensor values while timers support periodic measurements, and EEPROM can retain calibration or configuration parameters. Keep the analog signal within the specified input range and observe the data sheet's acquisition, reference, filtering, and layout requirements.
Where can I buy MC9S08PL32CLD and check current availability?
Use the Request a Quote form on this page to request the current MC9S08PL32CLD price, stock, lead time, and minimum order quantity. The manufacturer lists the exact MC9S08PL32CLD part as active, while current channel inventory and order handling can change independently of lifecycle status. Include the exact suffix, target quantity, delivery location, and required date so the quotation can be matched to the correct 44-LQFP configuration.
What is the price of MC9S08PL32CLD?
Request the current MC9S08PL32CLD price through the Request a Quote form on this page. The form supports volume-dependent sourcing for the exact 8-bit, 20MHz, 32KB-flash MCU in the 44-LQFP package. Because market pricing, inventory, and currency conditions change, use the quote response for procurement decisions rather than relying on a static historical listing.
What is the lead time and stock status for MC9S08PL32CLD?
The current lead time and stock status for MC9S08PL32CLD should be confirmed through the Request a Quote form on this page. NXP identifies the exact device as active, but active lifecycle status does not by itself guarantee every quantity is immediately available or that every packaging quantity can be allocated. State the required quantity, target date, and acceptable delivery terms so current manufacturing and distribution status can be evaluated.
What is the best cross-brand equivalent for MC9S08PL32CLD?
No cross-brand equivalent can be identified as a verified drop-in replacement for the MC9S08PL32CLD from the available cross-reference information. A true replacement must match the 44-LQFP footprint, 5V electrical environment, 20MHz clock capability, 32KB flash requirement, peripheral assignments, and firmware expectations. A similarly packaged microcontroller from another manufacturer may require a different pinout, bootloader, toolchain, or application rewrite, so complete a detailed compatibility review before substitution.
Does MC9S08PL32CLD support automotive or industrial-grade qualification?
The MC9S08PL32CLD is a general-purpose active S08P microcontroller, and no specific automotive qualification is established for this exact suffix. The manufacturer highlights good EFT and ESD performance at the family level, which is useful for electrically noisy environments but does not by itself establish AEC-Q100 qualification. For vehicle deployments, request the applicable NXP automotive-grade ordering information and verify temperature range, qualification status, and lifecycle commitments in the exact data sheet.

Impormasyon ng Talumpati sa Engineering for MC9S08PL32CLD — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the MC9S08PL32CLD when the design specifically needs a 5V, 20MHz 8-bit S08P controller with 32KB of flash, integrated EEPROM, a 10-bit ADC, an analog comparator, and flexible timers in a 44-LQFP package. Its established S08 tools and reusable core can reduce migration effort for teams already using that ecosystem. Consider MC9S08PT32VLD when its detailed 3.3V/5V operation and peripheral map better match the target board, but verify every pin and firmware dependency. Consider MC9S08PA32VLD or MC9S08PT32AVLD only after confirming clock, timer, serial-interface, ADC, reset, and programming compatibility. None of the identified NXP candidates should be treated as an automatic replacement solely because the memory size and package match. If a design requires substantially more flash, faster serial performance, more I/O, or a modern 32-bit architecture, a different MCU family may provide a better long-term fit.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto MC9S08PT32VLD MC9S08PA32VLD MC9S08PT32AVLD
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 44-LQFP (10mm x 10mm) 44-LQFP (10mm x 10mm) 44-LQFP (10mm x 10mm) 44-LQFP (10mm x 10mm)
CPU Architecture 8-bit S08 8-bit HCS08L 8-bit 8-bit
Flash Memory 32KB 32KB 32KB 32KB

Pangunahing mga Pagkakaiba

  • Integrated analog conversion and comparison (kumpara saMC9S08PT32VLD)
  • Defined 5V cost-effective positioning (kumpara saMC9S08PT32VLD)
  • Established S08 toolchain continuity (kumpara saMC9S08PA32VLD)
  • 20MHz processing speed with 32KB flash (kumpara saMC9S08PT32AVLD)

Talaan ng Disenyo

Use the exact 44-LQFP land pattern from the manufacturer package drawing and verify pin 1 orientation against the PCB footprint. Place the MCU's supply bypass capacitors adjacent to the appropriate power pins, with short return paths to the ground plane. Maintain the documented external clock and programming-signal access because the S08P configuration, reset, and debug connections must remain serviceable after assembly.

Route analog inputs away from switching nodes, high-current LED drivers, clocks, and programming signals. Use a continuous ground strategy that separates noisy return currents from the ADC and comparator reference paths. If the 10-bit ADC measures low-level sensor signals, follow the data sheet's acquisition and layout recommendations, including input filtering and a stable reference arrangement, to avoid sacrificing useful measurement resolution.

Do not assume that equal flash capacity and package dimensions make an S08P variant a functional drop-in. Before replacing the MC9S08PL32CLD, compare the pin-description table, alternate-function multiplexing, clock sources, timer channels, serial interfaces, interrupt vectors, reset behavior, and programming interface. A PCB that fits may still require firmware changes if peripheral assignments or low-power behavior differ.

The MCU is identified as a 5V S08P device, so power-supply design must stay within the exact electrical limits in the manufacturer data sheet. Include local decoupling, provide a deterministic reset path, and account for analog-reference stability when the ADC is used. Review clock, temperature, and maximum operating conditions at the system level rather than relying on the nominal 5V label alone.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

NXP identifies strong EFT and ESD performance for the S08P family, but no exact-suffix RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was established for the MC9S08PL32CLD.

Data napatotohanan sa: 2026-11-20 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

MC9S08PL32CLD datasheet MC9S08PL32CLD pinout MC9S08PL32CLD datasheet pdf MC9S08PL32CLD specifications MC9S08PL32CLD equivalent MC9S08PL32CLD replacement MC9S08PL32CLD cross reference MC9S08PL32CLD price MC9S08PL32CLD stock MC9S08PL32CLD vs MC9S08PT32VLD MC9S08PL32CLD 44-LQFP footprint NXP MC9S08PL32CLD MC9S08PL32CLD ADC application MC9S08PL32CLD programming

Mga kaugnay na Mga Komponente at mga Tuntunin

NXP Semiconductors MC9S08PL32CLD MC9S08PT32VLD MC9S08PA32VLD MC9S08PT32AVLD S08P S08 core 8-bit microcontroller embedded controller semiconductor 32KB flash memory EEPROM 10-bit ADC analog comparator flexible timers 20MHz 44-LQFP LQFP family surface mount SMD EFT performance ESD performance 5V embedded control industrial sensor acquisition
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ