MCF51AG96VLK - 50MHz 96KB Flash MCU | NXP | Industrial
MPN: MCF51AG96VLK ✓ NakahandaMCF51AG96VLK Ulas
A ColdFire microcontroller is an embedded processor that combines a 32-bit architecture with variable-length reduced instruction set computer characteristics. In the system hierarchy, this MCU belongs to the embedded processor family and sits below the broader semiconductor and electronic-control categories. Its core handles control logic and firmware execution, while integrated peripherals support communication, timing, analog control, and general-purpose I/O.
The verified data specifically identifies a maximum processor core speed of 50.33 MHz, 96 KB of flash storage, and 32-bit ColdFire architecture. The flash memory provides a nonvolatile program-storage location for embedded firmware. The listed 3.3 V or 5 V operating options support both common industrial and embedded supply environments, while the 80-LQFP package provides a conventional surface-mount footprint with numerous external connections.
Typical design uses include industrial automation, motor and motion-control systems, building controls, communications equipment, consumer appliances, and low-power embedded control nodes. The 50.33 MHz class of performance is useful for control loops, protocol handling, and supervisory logic, although actual response time depends on firmware, peripherals, memory architecture, and interrupt configuration. Designers should verify peripheral assignments, pin multiplexing, clock requirements, and voltage constraints against the manufacturer datasheet before layout release.
The 80-LQFP package requires careful escape-routing and thermal-aware PCB design. Keep sensitive analog and communication routes away from noisy switching nodes, provide clean decoupling at supply pins, and follow the datasheet’s recommended external components and pin multiplexing rules. Because the supplied search results do not provide a complete verified alternative cross-reference or a complete pinout table, substitute parts and individual pin functions must be validated rather than assumed.
This product page combines verified distributor and manufacturer-oriented source data with engineering-oriented selection guidance. It distinguishes confirmed facts from missing information, emphasizes that the device is not a power semiconductor, and avoids presenting unverified competitors as drop-in replacements.
Mga alternatibo na pwedeng ilagay na MCF51AG96VLK — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok MCF51AG96VLK (parehas na form factor at footprint) — pagkakaiba sa Package, Series.
MCF51AC256ACLKE
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MCF51AC256BCLKE
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →MCF51AC128AVLKE
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MCF51CN128CLK
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MCF51AG96VLK Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | 32-bit ColdFire microcontroller |
| Core Architecture | ColdFire V1 variable-length RISC |
| Maximum Core Speed | 50.33 MHz |
| Flash Memory | 96 KB |
| Flash Organization | 96K x 8 |
| Volte ng Pagbibigay | 3.3 V or 5 V |
| Packhaging | 80-LQFP |
| Package Dimensions | 14 x 14 mm |
| Uri ng Pagpapasok | Surface mount |
| Manufacturer | NXP |
| Series | MCF51AG |
| Core | ColdFire V1 |
| Data Width | 32-bit |
| Uri ng Memory | Flash |
| Program Memory | 96 KB |
| Bilang ng Pin | 80 pins |
Gabay sa Pin Configuration ng MCF51AG96VLK 14 x 14 mm
Pin configuration para sa MCF51AG96VLK (14 x 14 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa MCF51AG96VLK.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
MCF51AG96VLK ay nararapat para sa 6 aplikasyons: Industrial Automation Controller, Motor and Motion Control, Building and HVAC Control, Communications Gateway, Appliance and Embedded Product Control, Low-Power Embedded Control Node.
Industrial Automation Controller
The MCF51AG96VLK fits industrial automation supervisory and embedded-control nodes where a 32-bit ColdFire processor, 50.33 MHz maximum core speed, and 96 KB flash are useful for coordinating state machines, communication services, and I/O decisions. Its 3.3 V or 5 V supply flexibility can simplify platform partitioning across industrial equipment. The verified 80-LQFP package exposes many connections for field-bus, sensor, actuator, and debug interfaces. Design engineers should still verify timing margins, peripheral assignments, environmental limits, and isolation requirements before using the MCU in a safety-related or high-noise environment.
Inirekomenda
Motor and Motion Control
The MCF51AG96VLK can serve as the supervisory control processor in a motor-drive or motion-control system, using its 50.33 MHz ColdFire core for sequencing, state estimation, communication, and protection logic. The 96 KB flash capacity is suitable for compact embedded firmware when the application does not require larger code storage. It does not replace the power stage, gate driver, current sensor, or isolated safety hardware. Engineers should confirm PWM, timer, capture, ADC, communication, and pin-muxing requirements in the full datasheet before assigning control-loop functions.
Inirekomenda
Building and HVAC Control
The MCF51AG96VLK is suitable for building-control and HVAC supervisory nodes when the design needs local logic, protocol handling, and multiple digital I/O functions. Its 32-bit ColdFire architecture provides a stronger general-purpose processing base than an 8-bit controller, while 96 KB flash is adequate for many compact control applications. The 3.3 V or 5 V operating options align with many controller signal environments. Verification should include sensor inputs, relay or valve outputs, bus timing, watchdog behavior, power cycling, and environmental conditions because those details are not specified in the supplied search snippets.
Inirekomenda
Communications Gateway
The MCF51AG96VLK can be used in a communications gateway or protocol-conversion device when the application combines 96 KB firmware storage with a 50.33 MHz ColdFire processing core. That combination can support framing, routing, supervisory logic, and multiple peripheral tasks in compact embedded equipment. The device’s verified package and supply options provide a path to a conventional 80-LQFP PCB design. Protocol electrical layers, transceiver requirements, buffering, isolation, and timing margins must be implemented separately, and the complete pin-multiplexing map is required before assigning communication peripherals.
Inirekomenda
Appliance and Embedded Product Control
The MCF51AG96VLK is applicable to appliance and embedded product controllers where a local 32-bit core, 96 KB flash, and 3.3 V or 5 V supply options are preferable to a simple fixed-function controller. Firmware can coordinate user interfaces, sensors, relays, motor functions, safety monitoring, and diagnostic reporting. The 80-LQFP footprint is appropriate for multilayer PCB assembly, but its pin count and exposed connections require careful escape routing. Before release, validate reset behavior, brownout handling, watchdog integration, production programming, and all safety shutdown paths in the manufacturer documentation.
Inirekomenda
Low-Power Embedded Control Node
The MCF51AG96VLK can serve as a low-power embedded control node in battery- or line-powered equipment when its power modes, clocking options, and wake behavior are validated for the specific design. The verified source material identifies the device as low-power and confirms the ColdFire MCU architecture, but it does not provide detailed current-consumption figures. Therefore, battery-life claims require measurement or official datasheet values. Firmware should use low-power modes only after confirming wake sources, peripheral behavior, memory retention, startup time, and analog-noise requirements.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for MCF51AG96VLK — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | MCF51AC256ACLKE | MCF51AC256BCLKE | MCF51AC128AVLKE | MCF51CN128CLK |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | Freescale Semiconductor | Freescale Semiconductor | Freescale Semiconductor | Freescale Semiconductor |
| Package | 80-LQFP, 14 x 14 mm | 80-LQFP, package comparison result; exact dimensions require validation | 80-LQFP, package comparison result; exact dimensions require validation | 80-LQFP, package comparison result; exact dimensions require validation | 80-LQFP, package comparison result; exact dimensions require validation |
| Mounting Type | Surface mount | Surface mount package candidate | Surface mount package candidate | Surface mount package candidate | Surface mount package candidate |
Pangunahing mga Pagkakaiba
- Confirmed 96 KB flash capacity (kumpara saMCF51AC256ACLKE)
- Confirmed 50.33 MHz maximum core speed (kumpara saMCF51AC128AVLKE)
- Confirmed 80-LQFP 14 x 14 mm package (kumpara saMCF51CN128CLK)
Talaan ng Disenyo
Start the layout from the manufacturer’s 80-LQFP land pattern and pin table rather than a generic 80-pin symbol. Confirm pin 1 orientation, exposed or thermal-related connections if applicable, power naming, ground distribution, clock inputs, reset, debug, and alternate-function multiplexing. Because the supplied data confirms only the 80-LQFP 14 x 14 mm package, pin-level assignment and escape routing must be validated from the manufacturer datasheet and approved CAD library.
Plan the supply rails and decoupling around the exact manufacturer limits rather than the abbreviated 3.3 V or 5 V listing. Place required bulk and local decoupling capacitors close to the relevant supply pins, keep return paths short, and verify sequencing requirements during power cycling. The supplied data does not state current consumption, voltage tolerances, or capacitor values, so those values must be obtained from the datasheet rather than estimated.
Reserve space for programming, debug, clock, reset, and communication interfaces even if the first production firmware does not use every feature. Keep sensitive analog and communication paths away from high-current switching nodes, maintain controlled return-current paths, and follow the manufacturer’s external-component placement recommendations. The 96 KB flash and ColdFire core make firmware timing predictable only after clock and memory-wait-state configuration are confirmed.
Do not treat a same-family MPN or a matching 80-LQFP package as a drop-in replacement without checking every pin. Differences in memory size, peripheral mapping, clocking, supply limits, startup behavior, and software model can invalidate a substitution. The supplied cross-reference search produced related candidates but no complete manufacturer-approved equivalence; request a formal replacement recommendation and run hardware regression tests before production release.
Impormasyon ng Pagsunod sa Kautusan
The supplied verified search data does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for the exact MPN.
