MK2049-45ASI - 51.84MHz Dual-PLL Clock Synth | Renesas
MPN: MK2049-45ASI ✓ NakahandaMK2049-45ASI Ulas
A phase-locked-loop clock synthesizer belongs to the clock and timing IC hierarchy, where it sits below clock-generation and frequency-synthesis functions. It locks an internal oscillator to a reference clock and then generates or divides reference-derived frequencies. Unlike a free-running oscillator, a PLL-based device can transfer frequency stability from an external reference while allowing output frequency synthesis, programmable division, and jitter attenuation.
The MK2049-45ASI contains two PLL functions. According to the Renesas MK2049-45 datasheet, the first PLL is VCXO-based and uses a pullable crystal to track signal wander and attenuate input jitter. The second PLL supports frequency synthesis. A maximum output frequency of 51.84 MHz and a 1:3 input-to-output ratio identify the device as a communications-clock generation solution rather than a general-purpose timer.
The device accepts a clock reference and produces a clock output without differential signaling. Its architecture is intended to support communications equipment that needs a stable, derived clock while limiting reference jitter. The 3.3 V supply designation also places the device in systems designed around low-voltage digital clock trees, provided the complete power, input, output, and decoupling requirements are followed from the manufacturer datasheet.
Typical applications include communication line-card clocking, telecom backplane clock distribution, network-interface clock synthesis, and other systems requiring a PLL-derived communications reference. The maximum 51.84 MHz output makes it particularly relevant to designs operating below that frequency while using a stable external reference and controlled division ratio.
When designing a board around the MK2049-45ASI, use the manufacturer pin-description table and recommended external-component values before finalizing the layout. Pay particular attention to clock-input routing, pullable-crystal implementation, output loading, supply decoupling, and unused-pin handling, because incorrect clock topology can undermine otherwise correct PLL operation.
This product summary organizes the device architecture, package information, verified drop-in candidates, parameter comparisons, and practical clock-design guidance into a format that helps engineers evaluate the MK2049-45ASI before beginning a communications-clock schematic.
Mga alternatibo na pwedeng ilagay na MK2049-45ASI — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok MK2049-45ASI (parehas na form factor at footprint) — pagkakaiba sa Device Type, Package.
MK2049-45ASITR
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MK2049-45SI
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →MK2049-45A
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MK2049-45ASI Mga Spesipikasyon
| Device Type | PLL Clock Synthesizer |
| Architecture | Dual Phase-Locked Loop |
| PLL | Yes |
| Input Signal | Clock |
| Output Signal | Clock |
| Maximum Frequency | 51.84 MHz |
| Number of Circuits | 1 |
| Input-to-Output Ratio | 1:3 |
| Differential Input | No |
| Differential Output | No |
| Volte ng Pagbibigay | 3.3 V |
| Packhaging | 20-pin SOIC |
| Package Width | 0.295 inch (7.50 mm) |
| Uri ng Pagpapasok | Surface Mount |
| VCXO-Based PLL | Yes |
Gabay sa Pin Configuration ng MK2049-45ASI 0.295 inch (7.50 mm)
Pin configuration para sa MK2049-45ASI (0.295 inch (7.50 mm) package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa MK2049-45ASI.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
MK2049-45ASI ay nararapat para sa 6 aplikasyons: Telecom Line-Card Clocking, Network-Interface Clock Generation, Jitter-Attenuated Clock Reference, Communications Backplane Clock Distribution, Telecom Interface Module Timing, Low-Voltage Digital Clock Tree.
Telecom Line-Card Clocking
The MK2049-45ASI fits telecom line-card designs that require a reference-derived communications clock. Its dual phase-locked-loop architecture supports frequency synthesis and jitter attenuation, while the 51.84 MHz maximum frequency accommodates clocks below that ceiling. The VCXO-based first PLL can track signal wander using a pullable crystal, making the device appropriate for clock trees sensitive to phase disturbances. Design the reference path and external loop network from the manufacturer application guidance, and verify all timing margins against the actual system reference frequency.
Network-Interface Clock Generation
The MK2049-45ASI can generate a stable interface clock from an external reference in network-interface and communications equipment. Its 1:3 stated input-to-output relationship provides a defined basis for clock-tree planning, while the 51.84 MHz maximum output covers common sub-51.84 MHz communications-clock requirements. The second PLL performs frequency synthesis and the VCXO-based loop attenuates reference jitter. Confirm whether the required frequency ratio, output count, and loop bandwidth are supported by the final device configuration before schematic capture.
Jitter-Attenuated Clock Reference
Applications requiring cleaner reference-derived timing can use the MK2049-45ASI to combine jitter attenuation with frequency synthesis. The first phase-locked loop is VCXO-based and uses a pullable crystal to track signal wander, while the second loop generates the required output clock. This architecture is useful when an upstream reference contains wander or phase variation that would otherwise appear at the output. Actual jitter performance depends on the reference source, crystal selection, loop settings, supply quality, and PCB implementation, all of which should be validated with the manufacturer guidance.
Communications Backplane Clock Distribution
A communications backplane can use the MK2049-45ASI as a local clock-generation element before distribution through board-level clock buffers. The device supplies a single-ended clock output at up to 51.84 MHz and derives it through PLL architecture rather than free-running logic. That makes it useful when the backplane requires a disciplined clock related to an upstream reference. Keep sensitive traces short, observe return paths, and separate the regulator, reference, crystal, and clock-routing regions to preserve signal integrity from the oscillator through the distribution stage.
Telecom Interface Module Timing
The MK2049-45ASI is suitable for timing generation inside telecom interface modules that accept a reference clock and need a stable derived output. Its 3.3 V communications-clock supply designation and 20-pin SOIC package align with compact line-card and interface hardware. Use the PLL outputs to support endpoint circuits requiring frequency translation or division. Before committing the design, confirm the complete input frequency range, configuration method, output-drive capability, and loop bandwidth because those details determine whether a 51.84 MHz maximum rating is adequate for the intended data rate.
Low-Voltage Digital Clock Tree
The MK2049-45ASI can serve as the synthesis element in a low-voltage digital clock tree when the system operates from a 3.3 V supply and requires a clock below 51.84 MHz. PLL-based generation allows multiple sections of the system to use a common reference rather than independent oscillators, improving synchronization and simplifying architecture. The single-ended input and output also support conventional board routing. Decouple the supply locally, keep the reference path away from noisy switching nodes, and validate the final rise time, load, and output-jitter performance at the receiver.
Impormasyon ng Talumpati sa Engineering for MK2049-45ASI — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | MK2049-45ASITR | MK2049-45SI | MK2049-45A |
|---|---|---|---|---|
| Package | 20-pin SOIC | 20-pin SOIC - same | 20-pin SOIC - same | 20-pin SOIC - same |
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Device Type | PLL Clock Synthesizer | Clock Generator / PLL | Clock Generator / PLL | Dual Phase-Locked Loop |
| Maximum Frequency | 51.84 MHz | 51.84 MHz | 51.84 MHz | 51.84 MHz |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Architecture | Dual Phase-Locked Loop | Dual Phase-Locked Loop | Dual Phase-Locked Loop | Dual Phase-Locked Loop |
| Input-to-Output Ratio | 1:3 | 1:3 | 1:3 | 1:3 |
| Differential Input/Output | No/No | No/No | No/No | No/No |
Pangunahing mga Pagkakaiba
- Direct same-package ordering alternative (kumpara saMK2049-45ASITR)
- Reference-derived dual-loop architecture (kumpara saMK2049-45SI)
- Communications-focused clock synthesis (kumpara saMK2049-45A)
Talaan ng Disenyo
Place the 3.3 V supply bypass capacitor close to the device supply pins and provide a continuous ground reference beneath the SOIC. Route the clock input and output away from switching nodes and high-current return paths. Because the architecture includes a VCXO-based loop, a pullable crystal and its associated loop components require short, quiet traces; follow the manufacturer reference layout and component-selection guidance before finalizing placement.
Treat the reference, oscillator, and synthesized-clock paths as timing-sensitive nets. Use a controlled-impedance board where the clock frequency or edge rate makes transmission-line behavior relevant, keep the clock away from parallel high-speed data, and confirm the output waveform at the far-end load. The published 51.84 MHz maximum frequency does not by itself specify acceptable rise time, jitter, or loading for a specific board.
Do not assume that every suffix with the MK2049-45 family name has identical temperature, qualification, or ordering characteristics. Compare the complete ordering information, supply limits, clock frequencies, and pin configuration against the exact replacement part. For a drop-in substitution, verify that the existing pullable-crystal network, reference amplitude, output loading, and decoupling remain unchanged.
Impormasyon ng Pagsunod sa Kautusan
The Renesas datasheet and product page are the controlling sources for device functionality, but the retrieved material does not state the required compliance conclusions.
