NXP Semiconductors

MKL16Z32VLH4 - 48MHz Cortex-M0+ 32KB MCU | NXP

MPN: MKL16Z32VLH4 ✓ Nakahanda
1.71 V to 3.6 V Vdss 64-LQFP (10 x 10 mm) Package 48 MHz Speed 32 KB Flash (32K x 8) Memory
MOQ: 1 |

MKL16Z32VLH4 Ulas

NXP MKL16Z32VLH4 is a 32-bit Arm Cortex-M0+ microcontroller operating up to 48 MHz, with 32 KB of Flash memory, 4 KB of SRAM, and a 64-LQFP 10 x 10 mm package. The device belongs to the Kinetis KL1 general-purpose, ultra-low-power MCU family and combines a compact footprint with mixed-signal and communication peripherals.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripheral interfaces onto one device. The Kinetis KL1 hierarchy extends from the Cortex-M0+ MCU to embedded microcontroller, embedded processor, and semiconductor categories. MKL16Z32VLH4 is intended for compact embedded systems where low energy use, deterministic control, analog measurement, and flexible serial connectivity are more important than maximum processing performance or large program storage.

Key features include a 48 MHz Arm Cortex-M0+ core, 32 KB of Flash program memory, 4 KB of SRAM, and a 1.71 V to 3.6 V operating supply range. The product listing identifies 16-bit analog-to-digital conversion and 12-bit digital-to-analog conversion capabilities, while its ultra-low-power positioning makes it suitable for battery-operated and always-on embedded products. The 64-LQFP package also provides enough pins for external interfaces and mixed-signal circuitry.

The MKL16Z32VLH4 architecture combines a simple Cortex-M0+ instruction set with integrated communication, timing, analog, and GPIO resources. Its 32 KB Flash capacity supports embedded firmware, configuration data, and application state, while 4 KB of SRAM handles working memory. Operation across a 1.71 V to 3.6 V supply range permits integration with low-voltage 3.3 V systems and compatible power-management designs.

Typical uses include industrial sensor nodes, building-control endpoints, battery-powered monitors, compact motor-control modules, and low-cost communication appliances. Its small 10 x 10 mm LQFP footprint simplifies assembly when a leaded package is preferred over a fine-pitch or no-lead alternative. The integrated ADC and DAC also reduce the need for external conversion components in measurement and signal-conditioning designs.

PCB design should preserve a stable supply rail, route sensitive analog inputs away from fast digital switching paths, and follow the NXP pin-description table when assigning external signals. Because the 64-pin package exposes many peripheral options, unused pins should be configured according to the manufacturer guidance rather than left without a defined electrical state.

This page combines technical specifications, drop-in replacement guidance, application-focused design notes, and parameter comparisons to help engineers evaluate the MKL16Z32VLH4 before integrating it into an embedded control platform.

Mga alternatibo na pwedeng ilagay na MKL16Z32VLH4 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok MKL16Z32VLH4 (parehas na form factor at footprint) — pagkakaiba sa Package, Series, Mounting Type, ADC, Core Architecture.

NXP Semiconductors
Package: 64-LQFP (10x10 mm)
Series: Kinetis KL1x / KL16 sub-family
ADC: 12-bit SAR ADC
Ikabit sa MKL16Z32VLH4 →
NXP Semiconductors
Series: Kinetis KL17
Mounting Type: Surface-mount LQFP
Ikabit sa MKL16Z32VLH4 →
NXP Semiconductors
Package: 64-pin LQFP (10 x 10 mm)
ADC: 16-channel, 12-bit SAR
Core Architecture: ARM 32-bit
Ikabit sa MKL16Z32VLH4 →

MKL17Z32VLH4

✅ Drop-In
NXP Semiconductors
📦 64-LQFP (10 x 10 mm)
32-bit ultra-low-power microcontroller · Kinetis KL17 · Arm Cortex-M0+ · 32 bit · 48 MHz · 32 KB (32K x 8) · 8 KB · Flash

Magkontak para sa presyo

Tingnan ang Datasheet →

MKL24Z32VLH4

✅ Drop-In
📦 64-LQFP (10 x 10 mm)
Same 64-LQFP format and 48 MHz class; family feature set differs by approximately 20%

📋 Alternatibo na Reference (hindi sa katalogo)

MKL26Z32VLH4

✅ Drop-In
NXP Semiconductors
📦 64-LQFP (10 x 10 mm)
ARM Cortex-M0+ · ARM 32-bit · 48 MHz · 32 KB (32K x 8) · 4 KB · USB 2.0 Full-Speed (OTG or Device, crystal-less option) · 64-pin LQFP (10 x 10 mm) · VLH4 (LQFP-64)

Magkontak para sa presyo

Tingnan ang Datasheet →

MKL16Z64VLH4

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 64-LQFP (10 x 10 mm)
Same 64-LQFP format and 48 MHz class; Flash increases from 32 KB to 64 KB while core speed remains equal

📋 Alternatibo na Reference (hindi sa katalogo)

MKL16Z128VLH4

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
NXP Semiconductors
📦 64-LQFP (10 x 10 mm)
ARM Cortex-M0+ · Single-core · 32-bit · 48 MHz · 128 KB (128K x 8) · FLASH · 16 KB · Not present (per family datasheet)

Magkontak para sa presyo

Tingnan ang Datasheet →

MKL16Z32VLH4 Mga Pinakamataas na Rating at Electrical Characteristics

Product Type 32-bit Arm Cortex-M0+ microcontroller
Series Kinetis KL1
Maximum Core Frequency 48 MHz
Program Memory 32 KB Flash (32K x 8)
SRAM 4 KB
Supply Voltage na Operasyon 1.71 V to 3.6 V
Processor Architecture Arm Cortex-M0+
ADC Resolution 16-bit
DAC Resolution 12-bit
Packhaging 64-LQFP (10 x 10 mm)
Uri ng Pagpapasok Surface Mount
Operating Temperature Minimum -40 °C
Product Positioning General-purpose ultra-low-power MCU
Katayuan ng Lifecycle Active
Halogen-Free Status Compliant
EEPROM Not specified

Gabay sa Pin Configuration ng MKL16Z32VLH4 64-lqfp (10 x 10 mm)

Pin configuration para sa MKL16Z32VLH4 (64-lqfp (10 x 10 mm) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng 64-lqfp (10 x 10 mm) package para sa MKL16Z32VLH4

Wala ng detalyadong pinout data na magagamit para sa MKL16Z32VLH4.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

MKL16Z32VLH4 ay nararapat para sa 6 aplikasyons: Battery-Powered Sensor Node, Industrial Control Module, Building Automation Endpoint, Compact Motor-Control Interface, Communication Appliance, Low-Cost Data Acquisition Unit.

🧩

Battery-Powered Sensor Node

The MKL16Z32VLH4 fits a battery-powered sensor node because it combines a 48 MHz Arm Cortex-M0+ core, 32 KB Flash, 4 KB SRAM, and operation from 1.71 V to 3.6 V. Its 16-bit ADC can acquire analog sensor signals without requiring a separate converter, while the integrated DAC can support excitation or test-signal generation. Place the device beside the sensor interface, route analog inputs away from switching nodes, and use low-power modes between samples. The main design trade-off is the modest 32 KB program space, which can constrain future protocol or logging features.

🏭

Industrial Control Module

The MKL16Z32VLH4 is appropriate for compact industrial control modules that require deterministic embedded processing, serial communications, and analog monitoring. Its 48 MHz Cortex-M0+ core can execute control tasks, while 32 KB Flash stores application firmware and 4 KB SRAM provides working state for protocol handling. The 64-LQFP package exposes more pins than a small no-lead package, simplifying access to GPIO, communications, and mixed-signal resources. For factory equipment, provide regulated power, robust decoupling, and protection around external connectors while keeping switching-regulator traces away from ADC inputs.

🏠

Building Automation Endpoint

The MKL16Z32VLH4 works well in a building-automation endpoint that combines sensing, local logic, and low-power communications. Its 48 MHz core supports protocol processing and event handling, while the 4 KB SRAM is sufficient for short message buffers and control state. The integrated 16-bit ADC supports room, occupancy, or air-quality sensor interfaces, and the 1.71 V to 3.6 V operating range accommodates low-voltage power trees. Use the 64-LQFP footprint when the design requires a generous pin count or maintainability with a leaded package; verify wake, reset, and clock behavior across the complete power profile.

🔧

Compact Motor-Control Interface

The MKL16Z32VLH4 can serve as the logic and measurement layer in a compact motor-control interface. Its 48 MHz Cortex-M0+ core handles command processing, timing, and fault-state logic, while the 16-bit ADC can monitor feedback signals and the 12-bit DAC can generate a reference or test waveform. The 64-LQFP package provides a practical number of GPIO and peripheral pins for encoder, control, and status connections. The controller should remain isolated from motor-current switching paths, use appropriately protected inputs, and be validated with the external driver across worst-case noise and temperature conditions.

🌐

Communication Appliance

The MKL16Z32VLH4 is suitable for a small communication appliance that needs local protocol management, status reporting, and mixed-signal support without a high-performance processor. Its 32 KB Flash stores the communication stack and application logic, and its 4 KB SRAM supports packet buffering and state management. The 48 MHz core provides adequate throughput for low-rate serial protocols and supervisory tasks. Designers should evaluate firmware growth before deployment, reserve pins for the selected interface, and separate sensitive analog or reference circuitry from fast digital and network-isolation return currents to prevent signal-integrity degradation.

📟

Low-Cost Data Acquisition Unit

The MKL16Z32VLH4 supports a compact data-acquisition unit centered on its 16-bit ADC. The 48 MHz processor can filter samples, perform calibration, format results, and manage a serial reporting link, while 32 KB Flash holds configuration tables and firmware. The 12-bit DAC can support loopback testing or a controllable reference output, reducing the need for external circuitry in diagnostic designs. For accurate acquisition, maintain a quiet analog supply, use short guarded sensor routes, reference component placement guidance in the NXP datasheet, and calibrate gain and offset over the intended temperature range.

What are the key specifications of MKL16Z32VLH4 that engineers should know?
The MKL16Z32VLH4 is a 48 MHz, 32-bit Arm Cortex-M0+ microcontroller with 32 KB of Flash memory, 4 KB of SRAM, and a 64-LQFP 10 x 10 mm package. According to the NXP product information and manufacturer datasheet, it operates from 1.71 V to 3.6 V and provides 16-bit ADC and 12-bit DAC resolution. The device is positioned as an active, general-purpose member of the ultra-low-power Kinetis KL1 family.
Where can I download the MKL16Z32VLH4 datasheet PDF?
The MKL16Z32VLH4 datasheet PDF is available through the NXP product page at https://www.nxp.com/part/MKL16Z32VLH4. The manufacturer page provides the device overview, operating features, environmental information, shipping information, and linked technical documentation. For PCB design, use the manufacturer pin-description table and package drawing to assign all 64 LQFP pins correctly.
Where can I find the MKL16Z32VLH4 pinout and package drawing?
The MKL16Z32VLH4 pinout is found in the NXP manufacturer datasheet, which documents the 64-LQFP pin assignments and package dimensions. The component is supplied in a 10 x 10 mm LQFP package. Use the pin-description table to verify every power, ground, reset, clock, debug, analog, and GPIO connection before laying out the PCB.
What is the difference between MKL16Z32VLH4 and MKL17Z32VLH4?
The MKL17Z32VLH4 is another 64-pin, 32 KB Flash Kinetis KL1-family microcontroller, but its peripheral mix differs from the MKL16Z32VLH4. The NXP KL1x family description states that KL1x devices provide a migration path within the family, while detailed comparisons identify differences among communication and analog resources. Treat this as a firmware-verified family replacement rather than assuming identical peripheral routing.
Can MKL16Z32VLH4 be used in a 3.3 V embedded system?
Yes, the MKL16Z32VLH4 is suitable for a 3.3 V embedded system because its documented operating supply range is 1.71 V to 3.6 V. According to the NXP product information, the device supports low-voltage operation in a compact 64-LQFP package. Confirm each peripheral's pin-specific voltage limits and design the decoupling network in accordance with the manufacturer reference circuit.
What can replace the MKL16Z32VLH4?
The closest documented replacements are the MKL17Z32VLH4, MKL24Z32VLH4, MKL26Z32VLH4, MKL16Z64VLH4, and MKL16Z128VLH4, all listed as same-package Kinetis options. Their flash capacity, peripherals, and migration requirements can differ even when the package is unchanged. Validate pin multiplexing, interrupt assignments, clock configuration, and firmware dependencies before replacing the MKL16Z32VLH4.
Is MKL16Z32VLH4 suitable for a battery-powered sensor node?
The MKL16Z32VLH4 is well suited to a battery-powered sensor node because it belongs to the Kinetis KL1 general-purpose ultra-low-power family and supports operation down to 1.71 V. Its 48 MHz Cortex-M0+ core handles local sensor processing, while the integrated 16-bit ADC can acquire analog measurements. Battery life still depends on sleep-mode configuration, sensor duty cycle, and the selected regulator.
MKL16Z32VLH4 vs MKL24Z32VLH4: which is better for a new design?
Choose the MKL24Z32VLH4 when the new design needs more program storage or the additional resources available in that family member; choose the MKL16Z32VLH4 when 32 KB Flash, 4 KB SRAM, and the simpler KL1 feature set are sufficient. Both use a 64-LQFP format in the comparison listings, but firmware, peripheral assignments, and memory requirements must be reviewed before a decision.
When should I choose MKL16Z32VLH4 over a higher-memory Kinetis option?
Choose the MKL16Z32VLH4 when the application fits within 32 KB Flash and 4 KB SRAM and its mixed-signal and communication resources meet the design requirements. A higher-memory option is preferable when firmware growth, external protocols, logging, or application complexity could exceed the MKL16Z32VLH4 storage budget. The simpler target can also reduce software complexity when its available peripherals are sufficient.
What is the best drop-in replacement for MKL16Z32VLH4?
The MKL16Z64VLH4 is the closest memory-focused drop-in candidate because it retains the 64-LQFP format and increases Flash capacity while preserving the same basic family positioning. Pin compatibility alone does not guarantee firmware compatibility, so compare peripheral multiplexing, startup code, clock setup, and vector tables. Use the NXP migration information for the selected device before approving the substitution.
Is MKL16Z32VLH4 the same as MKL17Z32VLH4?
No, the MKL16Z32VLH4 and MKL17Z32VLH4 share a 64-pin Kinetis KL1-family format, but they are not functionally identical devices. The family is designed to support migration, yet communication peripherals, analog features, and related implementation details can differ. Confirm that every required peripheral and pin assignment is supported by the replacement and rerun hardware and firmware validation.
How much Flash and SRAM does MKL16Z32VLH4 have?
The MKL16Z32VLH4 provides 32 KB of Flash program memory and 4 KB of SRAM. According to the NXP manufacturer datasheet and distributor product summaries, Flash is organized as 32K x 8. These resources are suitable for compact control firmware, protocol handling, configuration, and local sensor processing without requiring an external memory device.
What is the operating voltage range of MKL16Z32VLH4?
The MKL16Z32VLH4 operates from 1.71 V to 3.6 V. This range supports low-voltage embedded designs and allows direct use in appropriate 3.3 V systems. According to the NXP product documentation, verify absolute maximum ratings separately and ensure that every external interface signal remains within the voltage limits of the selected pin.
Where can I buy MKL16Z32VLH4 online?
Use the Request a Quote form on this page to request MKL16Z32VLH4 pricing, stock confirmation, and delivery information. The NXP product page identifies the exact MPN as active. A formal quotation also helps confirm the required package, tape-and-reel configuration, quantity, and current production or allocation status before procurement.
What is the price of MKL16Z32VLH4?
Current pricing for MKL16Z32VLH4 should be obtained through the Request a Quote form on this page. The form allows quantity, package, and delivery requirements to be included in the request. Because embedded-component pricing and allocation can change with volume and market conditions, a current quotation is more reliable than a static unit-price figure.
What is the lead time for MKL16Z32VLH4?
Request the current lead time through the Request a Quote form on this page and include your required quantity and delivery location. The NXP product page identifies MKL16Z32VLH4 as active, but manufacturing schedule and market allocation can affect committed delivery dates. Procurement should confirm the date against its production plan before treating the component as available.

Impormasyon ng Talumpati sa Engineering for MKL16Z32VLH4 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the MKL16Z32VLH4 for a compact embedded design that fits within 32 KB Flash and 4 KB SRAM and requires a 48 MHz Cortex-M0+ core, mixed-signal resources, and a 64-LQFP package. It is a practical choice for sensor nodes, industrial control modules, building endpoints, and compact communication products. Select MKL17Z32VLH4 when its expanded peripheral mix provides a direct functional advantage, but verify pin multiplexing and firmware requirements. Consider MKL24Z32VLH4 or MKL26Z32VLH4 when their additional family resources justify the migration. MKL16Z64VLH4 and MKL16Z128VLH4 are attractive when firmware growth is expected while the same package and basic memory architecture remain useful. For every alternative, confirm pin assignment, peripheral functionality, clock configuration, memory size, and migration requirements before approving a drop-in substitution.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto MKL17Z32VLH4 MKL24Z32VLH4 MKL26Z32VLH4 MKL16Z64VLH4 MKL16Z128VLH4
Package 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm)
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Core Architecture Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+
Maximum Frequency 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz

Pangunahing mga Pagkakaiba

  • Direct 32 KB Flash configuration in the selected 64-LQFP option (kumpara saMKL16Z64VLH4)
  • Simplest same-package family choice for a 32 KB design (kumpara saMKL17Z32VLH4)
  • Lower storage requirement within the same package family (kumpara saMKL16Z128VLH4)
  • Same 48 MHz processing class for protocol and control tasks (kumpara saMKL26Z32VLH4)

Talaan ng Disenyo

Place all decoupling capacitors immediately beside their corresponding power pins and minimize the loop area between each capacitor and the device. Follow the NXP reference layout for capacitor value, placement, and ground return paths. Because this MCU integrates sensitive analog converters, avoid sharing narrow high-current return paths between analog supply pins and switching circuitry.

Route analog inputs as short, quiet traces away from clock, debug, and digital switching nets. Use a continuous ground reference beneath the analog section when the board stack-up permits it, and terminate unused inputs according to the pin-description table. Validate the final layout with scope measurements at the MCU pin because package and ground-return effects can degrade converter accuracy.

Do not treat same-package status as sufficient proof of a drop-in replacement. Check the complete pin-description table, alternate-function muxing, clock sources, interrupt vectors, watchdog settings, and analog-channel assignments. The MKL17Z32VLH4, MKL24Z32VLH4, and MKL26Z32VLH4 have different family feature sets even though their comparison listings use the same 64-LQFP format.

Design the supply for the full 1.71 V to 3.6 V operating range and include margin for startup, temperature, and dynamic load variation. If the MCU controls a motor, relay, or high-current LED stage, isolate those loads from the digital supply path. Low-current sensing and communications will benefit from sequencing or filtering around sensitive analog rails.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Compliant
Mga Conflict Mineral
Unknown

The cross-reference record identifies the MKL16Z32VLH4 as halogen-free compliant. RoHS, REACH, lead-free, and conflict-minerals status are unknown.

Data napatotohanan sa: 2026-11-19 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

MKL16Z32VLH4 datasheet MKL16Z32VLH4 datasheet pdf MKL16Z32VLH4 pinout MKL16Z32VLH4 specifications NXP MKL16Z32VLH4 MKL16Z32VLH4 price MKL16Z32VLH4 stock MKL16Z32VLH4 replacement MKL16Z32VLH4 equivalent MKL16Z32VLH4 vs MKL17Z32VLH4 MKL16Z32VLH4 48MHz Cortex-M0+ MKL16Z32VLH4 64-LQFP MKL16Z32VLH4 sensor node MKL16Z32VLH4 application circuit

Mga kaugnay na Mga Komponente at mga Tuntunin

NXP Semiconductors MKL16Z32VLH4 MKL17Z32VLH4 MKL24Z32VLH4 MKL26Z32VLH4 MKL16Z64VLH4 MKL16Z128VLH4 Kinetis KL1 Arm Cortex-M0+ microcontroller embedded processor semiconductor 32 KB Flash 4 KB SRAM 48 MHz 1.71 V to 3.6 V 16-bit ADC 12-bit DAC 64-LQFP LQFP package family surface-mount package ultra-low-power MCU sensor node industrial control
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ