MMC2114CFCVF33 - 33MHz 256KB MCore MCU | NXP | Industrial
MPN: MMC2114CFCVF33 ✗ Tapus ng BuhayMMC2114CFCVF33 Ulas
A microcontroller is a programmable embedded-control component that combines a processor core, memory, peripherals, and I/O in one integrated circuit. The MMC2114 belongs to the MCore family of 32-bit microcontrollers and is positioned for embedded control applications requiring local program storage, digital interfaces, and deterministic control functions. Its 196-ball grid package supports dense PCB routing while exposing the device's broad pin complement on a compact board area.
The verified listing identifies 256 KB of flash program memory, 32K x 8 RAM, 104 I/O, a 33 MHz operating speed, an internal oscillator, and tray packaging. The internal oscillator is relevant for designs that need a compact clocking arrangement without relying on an external frequency source. The supplied data does not provide detailed peripheral inventories, supply-voltage limits, timing values, memory-map details, or electrical characteristics, so those parameters should be confirmed in the manufacturer datasheet before schematic capture or firmware development.
MMC2114 devices are associated with the legacy M210/MMC2114 microcontroller line. The product prefix MMC2114 identifies the device family, while the complete ordering code MMC2114CFCVF33 identifies the listed configuration. Because firmware compatibility, memory organization, pin multiplexing, and electrical limits are configuration-specific, engineers should treat the exact suffix and package drawing as essential parts of the selection process rather than relying only on the 33 MHz headline speed.
Typical engineering uses for this device include industrial control, embedded automation, motor and power-system supervisory control, communications equipment, and test or measurement platforms. In these systems, the MCU can execute control software from its on-chip flash while using its 104 I/O pins for sensors, actuators, communication signals, and status indicators. The 196-LBGA footprint is especially relevant where a high pin count and compact assembly are more important than a large, easily hand-soldered package.
For new designs, verify the exact pin assignments, power rails, decoupling requirements, programming method, reset behavior, and peripheral availability in the MMC2114 manufacturer documentation. For repair or obsolescence management, confirm lifecycle status and authorized sourcing with NXP or an approved distributor. This page synthesizes the verified distributor specifications, package information, sourcing data, and replacement-search results available for MMC2114CFCVF33.
Mga alternatibo na pwedeng ilagay na MMC2114CFCVF33 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Wala ng magagamit na drop-in alternatibo para sa produkto na ito.
Hilingin ang AlternatiboMMC2114CFCVF33 Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | MCore microcontroller IC |
| Architecture | 16/32-bit |
| Core / Family | M210 MCore |
| Processor Speed | 33 MHz |
| Program Memory | 256 KB (256K x 8) flash |
| RAM Size | 32K x 8 |
| Number of I/O | 104 |
| Oscillator Type | Internal |
| Packhaging | 196-LBGA (15 x 15 mm) |
| Package Type | LBGA |
| Terminal Count | 196 |
| Package Shape | Square |
| Packaging | Tray |
| Temperature Grade | Industrial |
| Device Series | MMC2114 |
| Product Type Detail | 32-bit RISC microcontroller |
| Supplier Listing Description | M210 MCore Microcontroller IC 16/32-Bit |
Gabay sa Pin Configuration ng MMC2114CFCVF33 square
Pin configuration para sa MMC2114CFCVF33 (square package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa MMC2114CFCVF33.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
MMC2114CFCVF33 ay nararapat para sa 6 aplikasyons: Industrial Embedded Control, Motor and Power-System Supervision, Communications Equipment, Test and Measurement Equipment, Automation Gateway and Data Concentrator, Consumer and Appliance Control.
Industrial Embedded Control
The MMC2114CFCVF33 fits industrial embedded-control platforms that need local flash program storage, a 33 MHz control processor, and 104 I/O. Its 196-LBGA package exposes a dense pin complement on a 15 x 15 mm footprint, which can support compact multi-function control boards. The device is listed as industrial temperature grade, but the designer must confirm the exact supply voltage, I/O ratings, timing limits, peripheral set, and environmental qualification before using it in a deployed controller.
Inirekomenda
Motor and Power-System Supervision
MMC2114CFCVF33 can serve as a supervisory controller in motor, power, or industrial automation equipment where the controller executes firmware from 256 KB of flash and monitors external signals through 104 I/O. The 33 MHz MCore architecture provides a defined processing platform for sequencing, fault detection, state-machine control, and communication tasks. Actual motor-drive suitability depends on pin multiplexing, timing peripherals, electrical limits, and isolation requirements that are not present in the supplied data.
Inirekomenda
Communications Equipment
The MMC2114CFCVF33 is applicable to communication equipment needing an embedded protocol controller, local nonvolatile firmware, and a broad I/O interface. Its 33 MHz operating speed and 256 KB flash can support protocol handling, supervisory logic, and data-path coordination when the required serial peripherals and memory interfaces are available. The supplied records do not enumerate UART, SPI, CAN, Ethernet, or USB resources, so the exact communications peripherals must be confirmed from the MMC2114 datasheet before schematic design.
Inirekomenda
Test and Measurement Equipment
A 33 MHz MMC2114CFCVF33 can be used as the control processor in test or measurement equipment, where the MCU coordinates front-panel functions, sequencing, data acquisition, and external instrument interfaces. Its 104 I/O can provide distributed digital connections around a dense BGA package, while 256 KB flash can hold application firmware. Verify ADC availability, timer resources, external bus requirements, and electrical noise performance; these specifications are not included in the supplied source data.
Inirekomenda
Automation Gateway and Data Concentrator
MMC2114CFCVF33 can support a compact automation gateway that gathers sensor status, controls local outputs, and manages communications between field equipment and a higher-level controller. Its 32K x 8 RAM and 256 KB flash provide resources for moderate embedded workloads, while the 104 I/O count can reduce the need for external I/O expansion. The actual design should confirm package pin functions, bus timing, memory expansion requirements, and thermal performance in the final enclosure.
Inirekomenda
Consumer and Appliance Control
The MMC2114CFCVF33 can be evaluated for appliance or embedded product control where a high-pin-count microcontroller provides access to buttons, displays, sensors, relays, and communications. Its 33 MHz speed is suitable for many supervisory and sequencing tasks, and tray packaging can support manufacturing processes designed for the 196-LBGA footprint. Because the device is a legacy MCore MCU, confirm current sourcing, software tool support, lifecycle status, and exact electrical requirements before new consumer-product introduction.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for MMC2114CFCVF33 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto |
|---|---|
| Package | 196-LBGA (15 x 15 mm) |
| Brand | NXP Semiconductors |
| Processor Speed | 33 MHz |
| Program Memory | 256 KB (256K x 8) flash |
| RAM Size | 32K x 8 |
| I/O Count | 104 |
| Architecture | 16/32-bit MCore |
| Oscillator | Internal |
| Packaging | Tray |
Pangunahing mga Pagkakaiba
- Specific M210 MCore configuration (kumpara saGeneric 32-bit microcontrollers)
- High verified I/O count (kumpara saLower-pin-count embedded MCUs)
- Compact high-density package (kumpara saLarger leaded or lower-pin-count packages)
- Integrated local program storage (kumpara saMCU designs requiring external program memory)
Talaan ng Disenyo
The MMC2114CFCVF33 uses a 196-LBGA package, so the PCB footprint, ball-pitch dimensions, solder-mask design, and paste stencil must be taken directly from the exact manufacturer package drawing. Do not infer the land pattern from the 15 x 15 mm body size alone. Confirm ball assignments and exposed power or ground requirements before routing because the supplied source data does not include the full pinout.
The verified data does not specify supply voltage, current consumption, or power ratings. Before power-up, obtain the MMC2114 electrical characteristics and identify every power ball, decoupling requirement, and sequencing rule from the exact datasheet. PCB power planning should then include startup current margin and regulator headroom; those values cannot be estimated from the 33 MHz operating speed.
A generic 32-bit MCU or MCore-looking part is not a verified replacement for MMC2114CFCVF33. The target combines a 196-LBGA footprint, 33 MHz operation, 256 KB flash, 32K x 8 RAM, and a specific MMC2114 suffix. Validate pin compatibility, memory mapping, interrupt vector behavior, peripheral availability, programming tools, and firmware migration before approving any substitute.
Impormasyon ng Pagsunod sa Kautusan
The supplied verified web data does not provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations for MMC2114CFCVF33. Obtain current compliance documentation from NXP or an authorized distributor before production release.
