MSP430F5521IPN - 25MHz 32KB MCU with USB | Texas Instruments
MPN: MSP430F5521IPN ✓ NakahandaMSP430F5521IPN Ulas
A mixed-signal microcontroller combines a low-power digital controller with analog measurement functions on one device. Within the product hierarchy, the MSP430F5521IPN is an MCU, mixed-signal microcontroller, embedded processor, and semiconductor. This integration can reduce board area by placing the ADC, comparator, communication controllers, DMA engine, timers, and general-purpose I/O in one package while retaining the low-power operating characteristics associated with the MSP430 family.
Key resources include 32KB of flash organized as 32K × 8 bits, 6KB of SRAM, 63 I/O pins as identified in the device listing, and a maximum clock frequency of 25 MHz. The integrated 12-bit ADC supports analog signal acquisition, while the comparator provides fast thresholding and basic signal-conditioning functions. DMA reduces interrupt and CPU involvement when transferring data between peripherals and memory. The hardware multiplier improves the execution speed of multiplication-intensive control and signal-processing algorithms.
Communication resources include USB and two types of serial-controller functionality identified as UART, SPI, and I²C support. These interfaces make the device suitable for connecting sensors, data converters, display peripherals, external memory, and service or communications ports. The mixed-signal feature set also allows designers to consolidate a measurement-and-control subsystem instead of using a separate MCU and analog interface circuit.
Typical uses include industrial sensor acquisition, USB-connected test equipment, low-power data loggers, building controls, portable measurement instruments, and embedded communications modules. The 80-LQFP package provides 63 I/O pins, making it appropriate when a design requires numerous external connections while retaining through-hole-style board handling. The -40°C to +85°C temperature range supports industrial-temperature operation.
Design the power, ground, and decoupling network from the manufacturer’s device recommendations, and verify every peripheral assignment against the complete pin-description table. USB designs require careful routing, controlled impedance, suitable grounding, and compliant transceiver support. This page combines device specifications, application guidance, comparison criteria, and replacement-selection considerations to support practical design decisions.
Mga alternatibo na pwedeng ilagay na MSP430F5521IPN — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok MSP430F5521IPN (parehas na form factor at footprint) — pagkakaiba sa ADC Resolution, Comparator, Flash Memory, Hardware Multiplier, Number of I/O Pins.
MSP430F5529IPN
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →MSP430F5528IPN
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
MSP430F5526IPN
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
MSP430F5524IPN
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
MSP430F5522IPN
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
MSP430F5521IPN Mga Pinakamataas na Rating at Electrical Characteristics
| Microcontroller Family | MSP430F5xx |
| Core Architecture | MSP430 CPUXV2, 16-bit RISC |
| Maksimum na Taktiko ng Oras | 25 MHz |
| Flash Memory | 32KB (32K × 8 bits) |
| SRAM | 6KB |
| ADC Resolution | 12 bits |
| Number of I/O Pins | 63 pins |
| USB Interface | Integrated USB |
| Serial Interfaces | UART, SPI, and I²C |
| DMA | Integrated DMA controller |
| Hardware Multiplier | Integrated hardware multiplier |
| Comparator | Integrated comparator |
| Packhaging | 80-pin LQFP (PN), 12 mm × 12 mm |
| Temperature na Operasyon | -40°C to +85°C |
| Uri ng Pagpapasok | Surface mount |
| Packaging | Tape and reel |
Gabay sa Pin Configuration ng MSP430F5521IPN 80-pin lqfp (pn), 12 mm × 12 mm
Pin configuration para sa MSP430F5521IPN (80-pin lqfp (pn), 12 mm × 12 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa MSP430F5521IPN.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
MSP430F5521IPN ay nararapat para sa 6 aplikasyons: USB Connected Test and Measurement Equipment, Industrial Sensor Acquisition, Low-Power Data Logger, Building Control and Automation Node, Portable Medical Instrument Interface, Embedded Communications Module.
USB Connected Test and Measurement Equipment
The MSP430F5521IPN fits USB-connected measurement instruments because it combines a 25 MHz MSP430 CPUXV2 core with 32KB flash, 6KB SRAM, a 12-bit ADC, comparator, DMA, and USB in one 80-LQFP device. The ADC can acquire analog inputs, while DMA transfers samples with limited processor intervention. USB provides a direct host connection for configuration, logging, and firmware communication. The integration reduces the number of companion ICs compared with separate controller and analog-conversion architectures. Designers should still budget substantial routing area for the 80-pin package and follow the manufacturer’s USB layout, decoupling, and grounding guidance.
Inirekomenda
Industrial Sensor Acquisition
The MSP430F5521IPN is appropriate for industrial sensor nodes that combine analog measurement with low-voltage embedded control. Its 12-bit ADC and comparator support analog sensing and threshold functions, while 63 I/O pins allow connections to sensors, actuators, status indicators, and digital interfaces. UART, SPI, and I²C provide alternatives for connecting sensors with different protocol requirements. The -40°C to +85°C range supports industrial-temperature designs. A key design consideration is the 80-LQFP footprint: although it offers abundant connectivity, analog and digital return paths must be separated to prevent sensor signals and switching activity from corrupting measurements.
Inirekomenda
Low-Power Data Logger
The MSP430F5521IPN can serve as the central controller in a low-power data logger when measurement speed, local storage, and multi-interface connectivity are more important than minimum footprint. Its 32KB flash provides program storage, 6KB SRAM supports working buffers, and the 12-bit ADC records sensor data. UART and I²C can connect to memory or environmental sensors, while DMA reduces processor activity during transfers. The listed active-mode benchmark of 290 µA/MHz at 8 MHz and 3.0 V gives a starting point for power estimation. Actual battery life depends on the selected sleep mode, sampling interval, USB activity, and sensor standby current.
Inirekomenda
Building Control and Automation Node
The MSP430F5521IPN is well suited to compact building-control nodes because it combines 63 I/O pins, three serial protocol families, analog conversion, and USB service access in a single mixed-signal MCU. UART may connect to local controllers, SPI to faster peripherals, and I²C to sensors and configuration devices. The integrated comparator can monitor thresholds, while the hardware multiplier supports control calculations. Using one device reduces interface duplication and simplifies firmware coordination. In a building-control environment, define failsafe states for communications loss and verify the exact pin multiplexing before connecting field wiring, relays, or sensor buses to the package.
Inirekomenda
Portable Medical Instrument Interface
The MSP430F5521IPN can be used in portable medical equipment as a low-voltage interface controller when the selected device configuration satisfies the product’s safety, quality, and electrical requirements. The 12-bit ADC supports acquisition from low-level analog sensors, and the comparator can assist with monitoring functions. USB enables a connection to a host computer, while UART, SPI, and I²C support local sensors, displays, and isolated data-transfer components. The -40°C to +85°C range covers many laboratory and portable operating environments. Compliance qualification remains application-specific and must not be inferred from the generic MCU feature set; the manufacturer documentation governs electrical limits and safety design.
Inirekomenda
Embedded Communications Module
The MSP430F5521IPN supports embedded communications modules that need flexible host and peripheral connectivity. USB provides a high-speed service path, while UART, SPI, and I²C cover external radios, transceivers, sensors, and configuration chips. The 25 MHz CPU provides useful throughput for protocol handling, and DMA can assist with moving received or transmitted data. Sixty-three I/O pins also leave resources for status LEDs, reset control, local storage, and auxiliary logic. Because the package exposes many signals, complete the pin assignment early and preserve USB trace geometry and grounding. Firmware should include timeout, retry, and bus-failure behavior so a peripheral fault does not block the entire module.
Inirekomenda
Impormasyon ng Talumpati sa Engineering for MSP430F5521IPN — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
For replacements, begin with the related MSP430F552x candidates, but do not equate shared package naming with guaranteed interchangeability. Verify every pin, peripheral multiplex, memory limit, USB detail, electrical condition, and software constraint. MSP430F5521IPN remains the clearest choice when its 63-I/O configuration and defined mixed-signal feature set are central to the design. A related device may be preferable only after its datasheet demonstrates equivalent behavior on the signals actually used by the target PCB.
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | MSP430F5529IPN | MSP430F5528IPN | MSP430F5526IPN | MSP430F5524IPN | MSP430F5522IPN |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 80-LQFP (PN), 12 mm × 12 mm | 80-LQFP (PN) | 80-LQFP (PN) | 80-LQFP (PN) | 80-LQFP (PN) | 80-LQFP (PN) |
Pangunahing mga Pagkakaiba
- Higher I/O availability within the related MSP430F552x family (kumpara saMSP430F5528IPN)
- Integrated mixed-signal and communications resources (kumpara saMSP430F5529IPN)
- Defined 25 MHz performance and 63-I/O configuration (kumpara saMSP430F5526IPN)
- Single-package integration reduces external peripheral count (kumpara saMSP430F5524IPN)
Talaan ng Disenyo
Use the manufacturer’s recommended power-supply and decoupling arrangement, with the device’s supply pins and ground connections following the package pin-description table. The listed operating example includes 3.0 V, while the stated low supply-voltage range begins at 3.6 V; do not treat those two facts as interchangeable. Select a regulator with suitable transient response and margin for USB, ADC, and switching-load activity, then verify brownout behavior across the complete operating range.
Place local supply bypassing adjacent to the appropriate power pins and provide a continuous, low-impedance ground plane. The 80-LQFP package has closely spaced leads, so fanout and via placement determine whether analog inputs, USB, clocks, and serial signals can be routed without avoidable impedance discontinuities. Check the manufacturer land pattern and keep test or programming access clear of high-speed and sensitive analog routing.
Route USB as a controlled-impedance interface and follow the device documentation for trace geometry, reference plane continuity, and grounding. Keep ADC inputs away from USB, switching regulators, and fast digital nets; use a quiet ground reference and short analog traces where practical. Comparator inputs also require attention because high-speed adjacent signals can couple into a high-impedance threshold node. Validate the final layout with signal-integrity and return-path measurements.
Do not substitute a related MSP430F552x device based only on the package name. Verify the exact pin table, USB implementation, ADC channels, timer resources, serial-controller counts, DMA mappings, clock sources, and memory organization for the selected orderable part. The related-device listing identifies several 47-I/O members, whereas MSP430F5521IPN has 63 I/O pins, so assuming identical multiplexing can cause PCB or firmware incompatibilities.
The listed 290 µA/MHz active-mode figure is measured at 8 MHz and 3.0 V and should not be treated as a universal power specification. Battery-powered designs must also account for sleep-mode current, ADC sampling energy, USB states, pull-up loads, external sensor current, and regulator quiescent current. Measure the complete product across each operating mode and confirm that the selected supply voltage satisfies every electrical and timing requirement.
Impormasyon ng Pagsunod sa Kautusan
The device operates over -40°C to +85°C. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statuses require confirmation from the current manufacturer product documentation.