Texas Instruments

OPA244UA - Low-Power Single-Supply Op Amp | Texas Instruments

MPN: OPA244UA ✓ Nakahanda
Single supply Vdss 50 µA per channel Id 8-pin SOIC Package
MOQ: 1 |

OPA244UA Ulas

The Texas Instruments OPA244UA is a low-power, single-supply operational amplifier designed for portable and battery-powered instrumentation. The device provides one amplifier circuit in an 8-pin SOIC package and is specifically suited to applications requiring low power consumption, compact implementation, and good signal bandwidth. According to the Texas Instruments OPA244 product information, the OPA244 family is designed around very low quiescent current of 50 µA per channel while maintaining excellent bandwidth.

An operational amplifier is an analog signal-processing semiconductor that amplifies the voltage difference between its inverting and non-inverting inputs. The OPA244 belongs to the MicroAmplifier product family, combining low-power operation with the functionality required for portable measurement circuits. It can be used for signal conditioning, buffering, current-voltage conversion, filtering, and general-purpose analog signal amplification.

The main advantage of the OPA244UA is its low-power operating behavior. A quiescent current of 50 µA per channel helps conserve energy in battery-operated systems, while the single-supply architecture supports compact portable equipment. The 8-pin SOIC package also provides a familiar surface-mount footprint for industrial, instrumentation, and embedded analog designs.

OPA244 devices are offered in single, dual, and quad configurations: OPA244, OPA2244, and OPA4244. The OPA2244 and OPA4244 versions feature independent circuitry for reduced crosstalk and design flexibility. This product family is intended for portable instrumentation and other space-constrained applications where power consumption, signal bandwidth, and package size are important design considerations.

Typical applications include battery-powered sensor interfaces, portable measurement instruments, low-current signal conditioning, medical monitoring equipment, and compact industrial control systems. In these systems, the OPA244 can buffer sensor outputs before conversion or amplification, while its low quiescent current helps limit the standby burden imposed by the amplifier itself.

Designers should pay close attention to input common-mode range, output swing, supply voltage, noise, offset voltage, bias current, and stability when selecting external compensation or feedback values. The 8-pin SOIC footprint simplifies PCB assembly, but the input and output paths still require careful layout to minimize parasitic capacitance, ground-loop effects, and unwanted coupling between adjacent high-impedance nodes.

This page combines the OPA244UA family positioning with packaging, application, and replacement guidance to help engineers plan low-power analog signal chains. It also identifies the verified manufacturer and distributor resources for further electrical, pinout, lifecycle, and sourcing review.

Mga alternatibo na pwedeng ilagay na OPA244UA — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

OPA244UA/2K5

✅ Drop-In
📦 8-pin SOIC
Same OPA244UA device and 8-pin SOIC footprint; the /2K5 identifier denotes a reel or order configuration rather than a different electrical function.

📋 Alternatibo na Reference (hindi sa katalogo)

OPA244UA/2K5E4

✅ Drop-In
📦 8-pin SOIC
Same OPA244UA electrical device in the 8-pin SOIC package; the suffix identifies an order or customer configuration.

📋 Alternatibo na Reference (hindi sa katalogo)

OPA244UA Mga Pinakamataas na Rating at Electrical Characteristics

Amplifier Type Single operational amplifier
Number of Circuits 1 circuit
Supply Type Single supply
Kuru-kuryente ng Kapayapaan 50 µA per channel
Packhaging 8-pin SOIC
Uri ng Pagpapasok Surface mount

Pin Configuration ng OPA244UA

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin 1 NC — Not connected
Pin 2 IN- — Inverting input
Pin 3 IN+ — Non-inverting input
Pin 4 V- — Negative supply or ground connection
Pin 5 NC — Not connected
Pin 6 OUT — Output
Pin 7 V+ — Positive supply
Pin 8 NC — Not connected

Tipikal na mga Gamit

OPA244UA ay nararapat para sa 6 aplikasyons: Battery-Powered Sensor Interface, Portable Measurement Instrument, Medical Monitoring Signal Chain, Industrial Current Measurement, Low-Power Voltage Buffer, Portable Audio and Communication Interface.

🔋

Battery-Powered Sensor Interface

The OPA244UA fits a battery-powered sensor front end because its confirmed 50 µA-per-channel quiescent current limits amplifier standby consumption while the OPA244 family provides useful bandwidth. Place the amplifier in a non-inverting or inverting configuration to buffer or scale the sensor signal before a higher-power conversion stage. The compact 8-pin SOIC also preserves board area in portable instruments. Before finalizing the circuit, verify input offset, bias current, common-mode range, noise, and output swing against the sensor operating range.

🧰

Portable Measurement Instrument

A portable measurement instrument can use the OPA244UA to condition low-level analog signals without consuming the supply budget through a high quiescent current. Its single-supply architecture is suitable for compact systems powered from one low-voltage rail, and the 8-pin SOIC package supports conventional surface-mount assembly. The amplifier can buffer an input divider, drive a subsequent converter, or form an active filter. Designers should confirm the usable output range and stability requirements directly in the manufacturer electrical-characteristics tables.

💊

Medical Monitoring Signal Chain

The OPA244UA can serve as a low-power gain or buffer stage in a medical monitoring signal chain where compactness and low standby current are important. The single amplifier and 8-pin SOIC package are appropriate for a small analog board, while the OPA244 family's 50 µA-per-channel quiescent current helps limit amplifier contribution to total system power. Medical designs still require separate evaluation of safety, leakage, noise, accuracy, and application-specific qualification before clinical use.

🏭

Industrial Current Measurement

The OPA244UA is suitable for low-power current-measurement circuitry that converts a scaled sensor voltage into a more usable analog signal. Place it in a gain stage or buffer after the shunt or current-sensing element, provided the input common-mode and output swing requirements are met. Its low 50 µA-per-channel quiescent current is beneficial in portable test equipment, while its small 8-pin SOIC footprint simplifies assembly. Stabilize the feedback network and keep sensitive input routing short and away from switching nodes.

⚡

Low-Power Voltage Buffer

OPA244UA can buffer a high-impedance voltage source before it feeds another circuit, reducing loading while preserving system-level power efficiency. Its low quiescent current is valuable when the source is sampled infrequently or when the instrument operates on a small battery. The 8-pin SOIC footprint provides a practical surface-mount option, but the exact output-current capability, output-voltage range, and capacitive-load behavior must be checked against the driven node. A small isolation resistor may be needed when driving capacitive loads.

🌐

Portable Audio and Communication Interface

The OPA244UA can provide low-level signal amplification in portable audio or communication interfaces where continuous amplifier power must remain modest. Its single-supply operation and 8-pin SOIC package simplify integration into compact mixed-signal boards, and the 50 µA-per-channel quiescent current helps protect battery life. Audio and RF-adjacent designs should verify input noise, distortion, bandwidth, output swing, and ground-return arrangement because the family-level product description alone does not establish every application-specific performance value.

What is the OPA244UA used for?
The OPA244UA is a low-power, single-supply operational amplifier intended for portable and battery-powered instrumentation. According to the Texas Instruments OPA244 product information, it combines a 50 µA-per-channel quiescent current with excellent bandwidth in an 8-pin SOIC package. It is suitable for sensor buffering, low-level signal conditioning, current-to-voltage conversion, filtering, and compact analog measurement systems.
Is OPA244UA a single, dual, or quad amplifier?
The OPA244UA contains one operational-amplifier circuit in an 8-pin SOIC package. The related OPA2244 is the dual version and OPA4244 is the quad version, and both are identified in the Texas Instruments family information. Because the circuit count differs, OPA2244 or OPA4244 should not be treated as direct one-for-one substitutes for the single OPA244UA.
What is the quiescent current of OPA244UA?
The OPA244 family is designed for very low quiescent current of 50 µA per channel. According to the Texas Instruments OPA244 family information, this low operating current supports battery-powered and portable instrumentation while retaining useful bandwidth. The 50 µA figure describes channel quiescent current and should be considered alongside the complete power budget of the associated sensor and conversion circuitry.
Can OPA244UA operate from a single supply?
Yes, the OPA244UA is designed as a single-supply operational amplifier. The Texas Instruments product description identifies OPA244 as a MicroAmplifier series device for portable and battery-powered applications. Exact minimum and maximum supply voltages and the usable input and output ranges should be selected from the manufacturer datasheet according to the required signal amplitude.
What package does OPA244UA use?
The OPA244UA is packaged in an 8-pin SOIC for surface-mount PCB assembly. The DigiKey listing identifies the part as a one-circuit, 8-SOIC operational amplifier from Texas Instruments. Use the manufacturer pin-description table when assigning signals and supply rails to the eight package terminals.
Where can I download the OPA244UA datasheet?
The official OPA244 datasheet is available from Texas Instruments through the manufacturer product link at https://www.ti.com/lit/gpn/OPA244. It is the preferred document for the authoritative OPA244 family specifications, pin assignments, electrical characteristics, ordering information, and application guidance. The product page at https://www.ti.com/product/OPA244 is the appropriate starting point for current lifecycle and support information.
Where can I find the OPA244UA pinout?
The OPA244UA pinout is shown in the Texas Instruments OPA244 datasheet, and the device uses an 8-pin SOIC package. Assign each terminal by consulting the pin-description table for the exact OPA244 family variant. In an 8-pin single operational-amplifier layout, unused terminals may be marked NC and should remain unconnected according to the manufacturer instructions.
Is OPA244UA suitable for battery-powered sensor circuits?
Yes, the OPA244UA is suitable for battery-powered sensor circuits because its 50 µA-per-channel quiescent current is designed for low-power portable instrumentation. It can buffer a sensor output before another amplification or conversion stage while limiting amplifier standby consumption. The final battery-life calculation must also include sensor current, pull-up or pull-down networks, and downstream converter activity.
What are the key specifications engineers should know about OPA244UA?
The key confirmed OPA244UA characteristics are one amplifier circuit, single-supply operation, 50 µA quiescent current per channel, and an 8-pin SOIC package. Texas Instruments positions the OPA244 family as a low-power MicroAmplifier offering excellent bandwidth. Exact gain-bandwidth product, offset voltage, bias current, noise density, slew rate, and operating temperature require the manufacturer electrical-characteristics table.
OPA244UA vs OPA2244UA: which should I choose?
Choose OPA244UA when the circuit needs one amplifier, while OPA2244UA provides two amplifiers in the related dual-device family. The OPA244 and OPA2244 share the low-power MicroAmplifier design objective and 50 µA-per-channel current rating, but they are not one-for-one pin-compatible substitutions because their amplifier counts differ. The OPA2244 family also provides independent circuitry for reduced crosstalk.
When should I choose OPA244UA over another low-power op amp?
Choose OPA244UA when the design needs a compact, low-power, single-supply amplifier for portable instrumentation and the exact OPA244 electrical limits satisfy the signal chain. A different amplifier may be preferable when its gain-bandwidth product, offset, noise, common-mode range, or output-drive requirements are better matched. The low 50 µA-per-channel quiescent current is most valuable when battery life dominates the design.
What can replace OPA244UA?
A direct replacement must use the same 8-pin SOIC footprint, preserve the pin assignments, and remain within the required supply, bandwidth, offset, noise, bias-current, and output-swing limits. The verified cross-reference material identifies the OPA2244 family as related, but OPA2244UA is a dual amplifier and therefore is not a drop-in replacement for the single OPA244UA. Validate any proposed substitute against the exact manufacturer datasheet before substitution.
Where can I buy OPA244UA and request current lead time?
Use the Request a Quote form on this page to request current OPA244UA availability, unit pricing, quantity breaks, and manufacturing lead time. The verified component listings identify the exact OPA244UA part, but static price and inventory figures can change rapidly. Requesting a quote against the full Texas Instruments MPN also helps confirm the required package, reel configuration, and order quantity.
What is the current price of OPA244UA?
Current OPA244UA pricing should be obtained through the Request a Quote form on this page because authorized inventory and commercial terms can vary by quantity, packaging, and order timing. Submit the exact MPN OPA244UA and the required quantity for a current quotation. This avoids relying on an obsolete historical price when production purchasing decisions are being made.
Is OPA244UA in stock and what is its lead time?
Use the Request a Quote form on this page to confirm current OPA244UA stock, scheduled delivery, and minimum-order quantity. Stock status and lead time are transactional attributes that can change independently of the product's lifecycle state. Include the required quantity, reel or tube format, and target delivery date in the quotation request.

Impormasyon ng Talumpati sa Engineering for OPA244UA — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose OPA244UA for portable or battery-powered analog designs that need one low-power, single-supply amplifier in an 8-pin SOIC package. Its 50 µA-per-channel quiescent current is particularly useful when the amplifier must remain active continuously but system energy is constrained. Choose OPA2244UA instead when the board can accommodate two amplifiers and needs independent channels or lower crosstalk; it is not a pin-compatible substitute. Choose OPA4244UA only when four amplifier circuits are needed. Before approving any replacement, compare supply range, common-mode input range, output swing, offset, bias current, noise, bandwidth, slew rate, stability, and exact pin assignments. The available ordering-code alternatives preserve the OPA244UA electrical function and footprint, so select them according to the required reel or customer configuration.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto OPA244UA/2K5 OPA244UA/2K5E4
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand Texas Instruments Texas Instruments Texas Instruments
Amplifier Circuit Count 1 circuit 1 circuit 1 circuit
Supply Configuration Single supply Single supply Single supply
Quiescent Current 50 µA per channel 50 µA per channel 50 µA per channel
Product Family OPA244 MicroAmplifier series OPA244 MicroAmplifier series OPA244 MicroAmplifier series
Primary Application Low-power portable instrumentation Low-power portable instrumentation Low-power portable instrumentation

Pangunahing mga Pagkakaiba

  • Low quiescent current supports portable operation (kumpara saOPA2244UA)
  • Single-amplifier configuration reduces board area (kumpara saOPA4244UA)
  • Same electrical device with distinct order identifiers (kumpara saOPA244UA/2K5)

Talaan ng Disenyo

Estimate total amplifier power as P = VCC × IQ, using the circuit's actual average supply voltage and the 50 µA-per-channel quiescent-current family specification. For example, a 3.3 V rail gives an estimated quiescent power of 0.165 mW per channel. Add output-current dissipation, feedback-network current, and downstream-stage consumption when evaluating battery life.

Keep the inverting-input node physically short because feedback-loop parasitic capacitance can alter stability and frequency response. Route sensitive inputs away from switching-regulator and digital-clock traces, use a continuous ground reference, and place input and feedback components close to the SOIC pins. Verify the final loop gain and capacitive loading against the manufacturer stability guidance.

Do not infer that every OPA244 ordering suffix is interchangeable without checking its package and reel orientation. Also avoid treating the OPA2244 dual amplifier as a direct substitute for the single OPA244UA. Confirm supply limits, common-mode range, output swing, offset, noise, bias current, slew rate, and stability for the exact ordering code before releasing a production design.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

No explicit compliance declarations were included in the manufacturer product-page or distributor snippets.

Data napatotohanan sa: 2026-11-14 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

OPA244UA datasheet OPA244UA pinout OPA244UA datasheet pdf OPA244UA equivalent OPA244UA replacement OPA244UA cross reference OPA244UA vs OPA2244UA Texas Instruments OPA244UA OPA244UA 50 uA low power OPA244UA SOIC-8 footprint OPA244UA battery powered amplifier OPA244UA price OPA244UA stock OPA244UA application circuit

Mga kaugnay na Mga Komponente at mga Tuntunin

Texas Instruments OPA244UA OPA244UA/2K5 OPA244UA/2K5E4 OPA2244UA OPA4244UA OPA244 OPA2244 OPA4244 Operational Amplifier MicroAmplifier Single-Supply Amplifier Low-Power Amplifier Quiescent Current 50 µA per channel SOIC-8 Surface Mount Portable Instrumentation Battery-Powered Devices Sensor Signal Conditioning Current-to-Voltage Conversion Signal Buffering Gain-Bandwidth Product Input Common-Mode Range
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ